summaryrefslogtreecommitdiff
path: root/drivers/net/starfire.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/starfire.c')
-rw-r--r--drivers/net/starfire.c29
1 files changed, 14 insertions, 15 deletions
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 1d2ef8f47780..f54ac2389da2 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -653,7 +653,6 @@ static int __devinit starfire_init_one(struct pci_dev *pdev,
void __iomem *base;
int drv_flags, io_size;
int boguscnt;
- DECLARE_MAC_BUF(mac);
/* when built into the kernel, we only print version if device is found */
#ifndef MODULE
@@ -823,9 +822,9 @@ static int __devinit starfire_init_one(struct pci_dev *pdev,
if (register_netdev(dev))
goto err_out_cleardev;
- printk(KERN_INFO "%s: %s at %p, %s, IRQ %d.\n",
+ printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n",
dev->name, netdrv_tbl[chip_idx].name, base,
- print_mac(mac, dev->dev_addr), irq);
+ dev->dev_addr, irq);
if (drv_flags & CanHaveMII) {
int phy, phy_idx = 0;
@@ -881,9 +880,9 @@ static int mdio_read(struct net_device *dev, int phy_id, int location)
void __iomem *mdio_addr = np->base + MIICtrl + (phy_id<<7) + (location<<2);
int result, boguscnt=1000;
/* ??? Should we add a busy-wait here? */
- do
+ do {
result = readl(mdio_addr);
- while ((result & 0xC0000000) != 0x80000000 && --boguscnt > 0);
+ } while ((result & 0xC0000000) != 0x80000000 && --boguscnt > 0);
if (boguscnt == 0)
return 0;
if ((result & 0xffff) == 0xffff)
@@ -1291,8 +1290,8 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
if (intr_status & (IntrRxDone | IntrRxEmpty)) {
u32 enable;
- if (likely(netif_rx_schedule_prep(dev, &np->napi))) {
- __netif_rx_schedule(dev, &np->napi);
+ if (likely(netif_rx_schedule_prep(&np->napi))) {
+ __netif_rx_schedule(&np->napi);
enable = readl(ioaddr + IntrEnable);
enable &= ~(IntrRxDone | IntrRxEmpty);
writel(enable, ioaddr + IntrEnable);
@@ -1452,12 +1451,8 @@ static int __netdev_rx(struct net_device *dev, int *quota)
#ifndef final_version /* Remove after testing. */
/* You will want this info for the initial debug. */
if (debug > 5) {
- printk(KERN_DEBUG " Rx data " MAC_FMT " " MAC_FMT
- " %2.2x%2.2x.\n",
- skb->data[0], skb->data[1], skb->data[2],
- skb->data[3], skb->data[4], skb->data[5],
- skb->data[6], skb->data[7], skb->data[8],
- skb->data[9], skb->data[10], skb->data[11],
+ printk(KERN_DEBUG " Rx data %pM %pM %2.2x%2.2x.\n",
+ skb->data, skb->data + 6,
skb->data[12], skb->data[13]);
}
#endif
@@ -1501,7 +1496,6 @@ static int __netdev_rx(struct net_device *dev, int *quota)
} else
#endif /* VLAN_SUPPORT */
netif_receive_skb(skb);
- dev->last_rx = jiffies;
np->stats.rx_packets++;
next_rx:
@@ -1509,6 +1503,11 @@ static int __netdev_rx(struct net_device *dev, int *quota)
desc->status = 0;
np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE;
}
+
+ if (*quota == 0) { /* out of rx quota */
+ retcode = 1;
+ goto out;
+ }
writew(np->rx_done, np->base + CompletionQConsumerIdx);
out:
@@ -1536,7 +1535,7 @@ static int netdev_poll(struct napi_struct *napi, int budget)
intr_status = readl(ioaddr + IntrStatus);
} while (intr_status & (IntrRxDone | IntrRxEmpty));
- netif_rx_complete(dev, napi);
+ netif_rx_complete(napi);
intr_status = readl(ioaddr + IntrEnable);
intr_status |= IntrRxDone | IntrRxEmpty;
writel(intr_status, ioaddr + IntrEnable);