summaryrefslogtreecommitdiff
path: root/drivers/net/usb/r8152.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/usb/r8152.c')
-rw-r--r--drivers/net/usb/r8152.c128
1 files changed, 117 insertions, 11 deletions
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index c5ebf35d2488..3f425f974d03 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -31,7 +31,7 @@
#define NETNEXT_VERSION "11"
/* Information for net */
-#define NET_VERSION "10"
+#define NET_VERSION "11"
#define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION
#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
@@ -68,6 +68,7 @@
#define PLA_LED_FEATURE 0xdd92
#define PLA_PHYAR 0xde00
#define PLA_BOOT_CTRL 0xe004
+#define PLA_LWAKE_CTRL_REG 0xe007
#define PLA_GPHY_INTR_IMR 0xe022
#define PLA_EEE_CR 0xe040
#define PLA_EEEP_CR 0xe080
@@ -95,6 +96,7 @@
#define PLA_TALLYCNT 0xe890
#define PLA_SFF_STS_7 0xe8de
#define PLA_PHYSTATUS 0xe908
+#define PLA_CONFIG6 0xe90a /* CONFIG6 */
#define PLA_BP_BA 0xfc26
#define PLA_BP_0 0xfc28
#define PLA_BP_1 0xfc2a
@@ -107,6 +109,7 @@
#define PLA_BP_EN 0xfc38
#define USB_USB2PHY 0xb41e
+#define USB_SSPHYLINK1 0xb426
#define USB_SSPHYLINK2 0xb428
#define USB_U2P3_CTRL 0xb460
#define USB_CSR_DUMMY1 0xb464
@@ -300,6 +303,9 @@
#define LINK_ON_WAKE_EN 0x0010
#define LINK_OFF_WAKE_EN 0x0008
+/* PLA_CONFIG6 */
+#define LANWAKE_CLR_EN BIT(0)
+
/* PLA_CONFIG5 */
#define BWF_EN 0x0040
#define MWF_EN 0x0020
@@ -312,6 +318,7 @@
/* PLA_PHY_PWR */
#define TX_10M_IDLE_EN 0x0080
#define PFM_PWM_SWITCH 0x0040
+#define TEST_IO_OFF BIT(4)
/* PLA_MAC_PWR_CTRL */
#define D3_CLK_GATED_EN 0x00004000
@@ -324,6 +331,7 @@
#define MAC_CLK_SPDWN_EN BIT(15)
/* PLA_MAC_PWR_CTRL3 */
+#define PLA_MCU_SPDWN_EN BIT(14)
#define PKT_AVAIL_SPDWN_EN 0x0100
#define SUSPEND_SPDWN_EN 0x0004
#define U1U2_SPDWN_EN 0x0002
@@ -354,6 +362,9 @@
/* PLA_BOOT_CTRL */
#define AUTOLOAD_DONE 0x0002
+/* PLA_LWAKE_CTRL_REG */
+#define LANWAKE_PIN BIT(7)
+
/* PLA_SUSPEND_FLAG */
#define LINK_CHG_EVENT BIT(0)
@@ -365,13 +376,18 @@
#define DEBUG_LTSSM 0x0082
/* PLA_EXTRA_STATUS */
+#define CUR_LINK_OK BIT(15)
#define U3P3_CHECK_EN BIT(7) /* RTL_VER_05 only */
#define LINK_CHANGE_FLAG BIT(8)
+#define POLL_LINK_CHG BIT(0)
/* USB_USB2PHY */
#define USB2PHY_SUSPEND 0x0001
#define USB2PHY_L1 0x0002
+/* USB_SSPHYLINK1 */
+#define DELAY_PHY_PWR_CHG BIT(1)
+
/* USB_SSPHYLINK2 */
#define pwd_dn_scale_mask 0x3ffe
#define pwd_dn_scale(x) ((x) << 1)
@@ -2863,6 +2879,17 @@ static int rtl8153_enable(struct r8152 *tp)
r8153_set_rx_early_timeout(tp);
r8153_set_rx_early_size(tp);
+ if (tp->version == RTL_VER_09) {
+ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
+ ocp_data &= ~FC_PATCH_TASK;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+ usleep_range(1000, 2000);
+ ocp_data |= FC_PATCH_TASK;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+ }
+
return rtl_enable(tp);
}
@@ -3376,8 +3403,8 @@ static void rtl8153b_runtime_enable(struct r8152 *tp, bool enable)
r8153b_ups_en(tp, false);
r8153_queue_wake(tp, false);
rtl_runtime_suspend_enable(tp, false);
- r8153_u2p3en(tp, true);
- r8153b_u1u2en(tp, true);
+ if (tp->udev->speed != USB_SPEED_HIGH)
+ r8153b_u1u2en(tp, true);
}
}
@@ -4675,7 +4702,6 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp)
r8153_aldps_en(tp, true);
r8152b_enable_fc(tp);
- r8153_u2p3en(tp, true);
set_bit(PHY_RESET, &tp->flags);
}
@@ -4954,6 +4980,8 @@ static void rtl8152_down(struct r8152 *tp)
static void rtl8153_up(struct r8152 *tp)
{
+ u32 ocp_data;
+
if (test_bit(RTL8152_UNPLUG, &tp->flags))
return;
@@ -4961,6 +4989,19 @@ static void rtl8153_up(struct r8152 *tp)
r8153_u2p3en(tp, false);
r8153_aldps_en(tp, false);
r8153_first_init(tp);
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
+ ocp_data |= LANWAKE_CLR_EN;
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG);
+ ocp_data &= ~LANWAKE_PIN;
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1);
+ ocp_data &= ~DELAY_PHY_PWR_CHG;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1, ocp_data);
+
r8153_aldps_en(tp, true);
switch (tp->version) {
@@ -4979,11 +5020,17 @@ static void rtl8153_up(struct r8152 *tp)
static void rtl8153_down(struct r8152 *tp)
{
+ u32 ocp_data;
+
if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
rtl_drop_queued_tx(tp);
return;
}
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
+ ocp_data &= ~LANWAKE_CLR_EN;
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
+
r8153_u1u2en(tp, false);
r8153_u2p3en(tp, false);
r8153_power_cut_en(tp, false);
@@ -4994,6 +5041,8 @@ static void rtl8153_down(struct r8152 *tp)
static void rtl8153b_up(struct r8152 *tp)
{
+ u32 ocp_data;
+
if (test_bit(RTL8152_UNPLUG, &tp->flags))
return;
@@ -5004,18 +5053,29 @@ static void rtl8153b_up(struct r8152 *tp)
r8153_first_init(tp);
ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B);
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
+ ocp_data &= ~PLA_MCU_SPDWN_EN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+
r8153_aldps_en(tp, true);
- r8153_u2p3en(tp, true);
- r8153b_u1u2en(tp, true);
+
+ if (tp->udev->speed != USB_SPEED_HIGH)
+ r8153b_u1u2en(tp, true);
}
static void rtl8153b_down(struct r8152 *tp)
{
+ u32 ocp_data;
+
if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
rtl_drop_queued_tx(tp);
return;
}
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
+ ocp_data |= PLA_MCU_SPDWN_EN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+
r8153b_u1u2en(tp, false);
r8153_u2p3en(tp, false);
r8153b_power_cut_en(tp, false);
@@ -5387,6 +5447,16 @@ static void r8153_init(struct r8152 *tp)
else
ocp_data |= DYNAMIC_BURST;
ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data);
+
+ r8153_queue_wake(tp, false);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
+ if (rtl8152_get_speed(tp) & LINK_STATUS)
+ ocp_data |= CUR_LINK_OK;
+ else
+ ocp_data &= ~CUR_LINK_OK;
+ ocp_data |= POLL_LINK_CHG;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
}
ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2);
@@ -5416,10 +5486,19 @@ static void r8153_init(struct r8152 *tp)
ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001);
r8153_power_cut_en(tp, false);
+ rtl_runtime_suspend_enable(tp, false);
r8153_u1u2en(tp, true);
r8153_mac_clk_spd(tp, false);
usb_enable_lpm(tp->udev);
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
+ ocp_data |= LANWAKE_CLR_EN;
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG);
+ ocp_data &= ~LANWAKE_PIN;
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data);
+
/* rx aggregation */
ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
@@ -5484,7 +5563,17 @@ static void r8153b_init(struct r8152 *tp)
r8153b_ups_en(tp, false);
r8153_queue_wake(tp, false);
rtl_runtime_suspend_enable(tp, false);
- r8153b_u1u2en(tp, true);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
+ if (rtl8152_get_speed(tp) & LINK_STATUS)
+ ocp_data |= CUR_LINK_OK;
+ else
+ ocp_data &= ~CUR_LINK_OK;
+ ocp_data |= POLL_LINK_CHG;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+
+ if (tp->udev->speed != USB_SPEED_HIGH)
+ r8153b_u1u2en(tp, true);
usb_enable_lpm(tp->udev);
/* MAC clock speed down */
@@ -5492,6 +5581,19 @@ static void r8153b_init(struct r8152 *tp)
ocp_data |= MAC_CLK_SPDWN_EN;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
+ ocp_data &= ~PLA_MCU_SPDWN_EN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+
+ if (tp->version == RTL_VER_09) {
+ /* Disable Test IO for 32QFN */
+ if (ocp_read_byte(tp, MCU_TYPE_PLA, 0xdc00) & BIT(5)) {
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+ ocp_data |= TEST_IO_OFF;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+ }
+ }
+
set_bit(GREEN_ETHERNET, &tp->flags);
/* rx aggregation */
@@ -6597,6 +6699,9 @@ static int rtl8152_probe(struct usb_interface *intf,
return -ENODEV;
}
+ if (intf->cur_altsetting->desc.bNumEndpoints < 3)
+ return -ENODEV;
+
usb_reset_device(udev);
netdev = alloc_etherdev(sizeof(struct r8152));
if (!netdev) {
@@ -6704,6 +6809,11 @@ static int rtl8152_probe(struct usb_interface *intf,
intf->needs_remote_wakeup = 1;
+ if (!rtl_can_wakeup(tp))
+ __rtl_set_wol(tp, 0);
+ else
+ tp->saved_wolopts = __rtl_get_wol(tp);
+
tp->rtl_ops.init(tp);
#if IS_BUILTIN(CONFIG_USB_RTL8152)
/* Retry in case request_firmware() is not ready yet. */
@@ -6721,10 +6831,6 @@ static int rtl8152_probe(struct usb_interface *intf,
goto out1;
}
- if (!rtl_can_wakeup(tp))
- __rtl_set_wol(tp, 0);
-
- tp->saved_wolopts = __rtl_get_wol(tp);
if (tp->saved_wolopts)
device_set_wakeup_enable(&udev->dev, true);
else
generated by cgit (git 2.34.1) at 2024-05-01 10:37:40 +0000