diff options
Diffstat (limited to 'drivers/net/usb/rtl8150.c')
| -rw-r--r-- | drivers/net/usb/rtl8150.c | 35 |
1 files changed, 31 insertions, 4 deletions
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index 01a3b2417a54..278e6cb6f4d9 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -71,6 +71,14 @@ #define MSR_SPEED (1<<3) #define MSR_LINK (1<<2) +/* USB endpoints */ +enum rtl8150_usb_ep { + RTL8150_USB_EP_CONTROL = 0, + RTL8150_USB_EP_BULK_IN = 1, + RTL8150_USB_EP_BULK_OUT = 2, + RTL8150_USB_EP_INT_IN = 3, +}; + /* Interrupt pipe data */ #define INT_TSR 0x00 #define INT_RSR 0x01 @@ -656,7 +664,6 @@ static void rtl8150_set_multicast(struct net_device *netdev) rtl8150_t *dev = netdev_priv(netdev); u16 rx_creg = 0x9e; - netif_stop_queue(netdev); if (netdev->flags & IFF_PROMISC) { rx_creg |= 0x0001; dev_info(&netdev->dev, "%s: promiscuous mode\n", netdev->name); @@ -670,7 +677,6 @@ static void rtl8150_set_multicast(struct net_device *netdev) rx_creg &= 0x00fc; } async_set_registers(dev, RCR, sizeof(rx_creg), rx_creg); - netif_wake_queue(netdev); } static netdev_tx_t rtl8150_start_xmit(struct sk_buff *skb, @@ -679,9 +685,16 @@ static netdev_tx_t rtl8150_start_xmit(struct sk_buff *skb, rtl8150_t *dev = netdev_priv(netdev); int count, res; + /* pad the frame and ensure terminating USB packet, datasheet 9.2.3 */ + count = max(skb->len, ETH_ZLEN); + if (count % 64 == 0) + count++; + if (skb_padto(skb, count)) { + netdev->stats.tx_dropped++; + return NETDEV_TX_OK; + } + netif_stop_queue(netdev); - count = (skb->len < 60) ? 60 : skb->len; - count = (count & 0x3f) ? count : count + 1; dev->tx_skb = skb; usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), skb->data, count, write_bulk_callback, dev); @@ -867,6 +880,13 @@ static int rtl8150_probe(struct usb_interface *intf, struct usb_device *udev = interface_to_usbdev(intf); rtl8150_t *dev; struct net_device *netdev; + static const u8 bulk_ep_addr[] = { + RTL8150_USB_EP_BULK_IN | USB_DIR_IN, + RTL8150_USB_EP_BULK_OUT | USB_DIR_OUT, + 0}; + static const u8 int_ep_addr[] = { + RTL8150_USB_EP_INT_IN | USB_DIR_IN, + 0}; netdev = alloc_etherdev(sizeof(rtl8150_t)); if (!netdev) @@ -880,6 +900,13 @@ static int rtl8150_probe(struct usb_interface *intf, return -ENOMEM; } + /* Verify that all required endpoints are present */ + if (!usb_check_bulk_endpoints(intf, bulk_ep_addr) || + !usb_check_int_endpoints(intf, int_ep_addr)) { + dev_err(&intf->dev, "couldn't find required endpoints\n"); + goto out; + } + tasklet_setup(&dev->tl, rx_fixup); spin_lock_init(&dev->rx_pool_lock); |