diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/core.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/core.c | 82 |
1 files changed, 81 insertions, 1 deletions
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index a202a4eea76a..f26cc6989dad 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -541,6 +541,33 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .tx_stats_over_pktlog = false, }, { + .id = QCA9377_HW_1_1_DEV_VERSION, + .dev_id = QCA9377_1_0_DEVICE_ID, + .bus = ATH10K_BUS_SDIO, + .name = "qca9377 hw1.1 sdio", + .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, + .uart_pin = 19, + .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, + .cal_data_len = 8124, + .fw = { + .dir = QCA9377_HW_1_0_FW_DIR, + .board = QCA9377_HW_1_0_BOARD_DATA_FILE, + .board_size = QCA9377_BOARD_DATA_SZ, + .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ, + }, + .hw_ops = &qca6174_ops, + .hw_clk = qca6174_clk, + .target_cpu_freq = 176000000, + .decap_align_bytes = 4, + .n_cipher_suites = 8, + .num_peers = TARGET_QCA9377_HL_NUM_PEERS, + .ast_skid_limit = 0x10, + .num_wds_entries = 0x20, + .uart_pin_workaround = true, + }, + { .id = QCA4019_HW_1_0_DEV_VERSION, .dev_id = 0, .bus = ATH10K_BUS_AHB, @@ -874,6 +901,13 @@ static int ath10k_core_get_board_id_from_otp(struct ath10k *ar) return -ENODATA; } + if (ar->id.bmi_ids_valid) { + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "boot already acquired valid otp board id,skip download, board_id %d chip_id %d\n", + ar->id.bmi_board_id, ar->id.bmi_chip_id); + goto skip_otp_download; + } + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot upload otp to 0x%x len %zd for board id\n", address, ar->normal_mode_fw.fw_file.otp_len); @@ -921,6 +955,8 @@ static int ath10k_core_get_board_id_from_otp(struct ath10k *ar) ar->id.bmi_board_id = board_id; ar->id.bmi_chip_id = chip_id; +skip_otp_download: + return 0; } @@ -2119,6 +2155,40 @@ done: return 0; } +static void ath10k_core_fetch_btcoex_dt(struct ath10k *ar) +{ + struct device_node *node; + u8 coex_support = 0; + int ret; + + node = ar->dev->of_node; + if (!node) + goto out; + + ret = of_property_read_u8(node, "qcom,coexist-support", &coex_support); + if (ret) { + ar->coex_support = true; + goto out; + } + + if (coex_support) { + ar->coex_support = true; + } else { + ar->coex_support = false; + ar->coex_gpio_pin = -1; + goto out; + } + + ret = of_property_read_u32(node, "qcom,coexist-gpio-pin", + &ar->coex_gpio_pin); + if (ret) + ar->coex_gpio_pin = -1; + +out: + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot coex_support %d coex_gpio_pin %d\n", + ar->coex_support, ar->coex_gpio_pin); +} + static int ath10k_init_uart(struct ath10k *ar) { int ret; @@ -2696,14 +2766,22 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode, if (test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map)) val |= WMI_10_4_BSS_CHANNEL_INFO_64; + ath10k_core_fetch_btcoex_dt(ar); + /* 10.4 firmware supports BT-Coex without reloading firmware * via pdev param. To support Bluetooth coexistence pdev param, * WMI_COEX_GPIO_SUPPORT of extended resource config should be * enabled always. + * + * We can still enable BTCOEX if firmware has the support + * eventhough btceox_support value is + * ATH10K_DT_BTCOEX_NOT_FOUND */ + if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) && test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM, - ar->running_fw->fw_file.fw_features)) + ar->running_fw->fw_file.fw_features) && + ar->coex_support) val |= WMI_10_4_COEX_GPIO_SUPPORT; if (test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, @@ -2863,6 +2941,8 @@ void ath10k_core_stop(struct ath10k *ar) ath10k_htt_tx_stop(&ar->htt); ath10k_htt_rx_free(&ar->htt); ath10k_wmi_detach(ar); + + ar->id.bmi_ids_valid = false; } EXPORT_SYMBOL(ath10k_core_stop); |