summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath5k/reg.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath5k/reg.h')
-rw-r--r--drivers/net/wireless/ath5k/reg.h679
1 files changed, 409 insertions, 270 deletions
diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h
index 7562bf173d3e..e557fe178bbf 100644
--- a/drivers/net/wireless/ath5k/reg.h
+++ b/drivers/net/wireless/ath5k/reg.h
@@ -1,7 +1,7 @@
/*
- * Copyright (c) 2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2007 Michael Taylor <mike.taylor@apprion.com>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -29,6 +29,10 @@
* http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
*
* 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
+ *
+ * This file also contains register values found on a memory dump of
+ * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal
+ * released by Atheros and on various debug messages found on the net.
*/
@@ -295,7 +299,7 @@
#define AR5K_ISR_RXPHY 0x00004000 /* PHY error */
#define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */
#define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */
-#define AR5K_ISR_BRSSI 0x00020000
+#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
#define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */
#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */
@@ -303,46 +307,56 @@
#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */
#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */
#define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */
-#define AR5K_ISR_TIM 0x00800000 /* [5210] */
-#define AR5K_ISR_BCNMISC 0x00800000 /* [5212+] */
-#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill)*/
-#define AR5K_ISR_QCBRORN 0x02000000 /* CBR overrun (?) [5211+] */
-#define AR5K_ISR_QCBRURN 0x04000000 /* CBR underrun (?) [5211+] */
-#define AR5K_ISR_QTRIG 0x08000000 /* [5211+] */
+#define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */
+#define AR5K_ISR_TIM 0x00800000 /* [5211+] */
+#define AR5K_ISR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+ CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
+#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */
+#define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */
+#define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */
+#define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */
/*
* Secondary status registers [5211+] (0 - 4)
*
- * I guess from the names that these give the status for each
- * queue, that's why only masks are defined here, haven't got
- * any info about them (couldn't find them anywhere in ar5k code).
+ * These give the status for each QCU, only QCUs 0-9 are
+ * represented.
*/
#define AR5K_SISR0 0x0084 /* Register Address [5211+] */
#define AR5K_SISR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */
+#define AR5K_SISR0_QCU_TXOK_S 0
#define AR5K_SISR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */
+#define AR5K_SISR0_QCU_TXDESC_S 16
#define AR5K_SISR1 0x0088 /* Register Address [5211+] */
#define AR5K_SISR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */
+#define AR5K_SISR1_QCU_TXERR_S 0
#define AR5K_SISR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */
+#define AR5K_SISR1_QCU_TXEOL_S 16
#define AR5K_SISR2 0x008c /* Register Address [5211+] */
#define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */
+#define AR5K_SISR2_QCU_TXURN_S 0
#define AR5K_SISR2_MCABT 0x00100000 /* Master Cycle Abort */
#define AR5K_SISR2_SSERR 0x00200000 /* Signaled System Error */
-#define AR5K_SISR2_DPERR 0x00400000 /* Det par Error (?) */
+#define AR5K_SISR2_DPERR 0x00400000 /* Bus parity error */
#define AR5K_SISR2_TIM 0x01000000 /* [5212+] */
#define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */
#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */
#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */
#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */
#define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */
+#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF OOR (?) */
#define AR5K_SISR3 0x0090 /* Register Address [5211+] */
#define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */
+#define AR5K_SISR3_QCBORN_S 0
#define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */
+#define AR5K_SISR3_QCBRURN_S 16
#define AR5K_SISR4 0x0094 /* Register Address [5211+] */
#define AR5K_SISR4_QTRIG 0x000003ff /* Mask for QTRIG */
+#define AR5K_SISR4_QTRIG_S 0
/*
* Shadow read-and-clear interrupt status registers [5211+]
@@ -379,7 +393,7 @@
#define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/
#define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */
#define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/
-#define AR5K_IMR_BRSSI 0x00020000
+#define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
#define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/
#define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */
@@ -387,12 +401,14 @@
#define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/
#define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */
#define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */
+#define AR5K_IMR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */
#define AR5K_IMR_TIM 0x00800000 /* [5211+] */
-#define AR5K_IMR_BCNMISC 0x00800000 /* [5212+] */
+#define AR5K_IMR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+ CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
#define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/
-#define AR5K_IMR_QCBRORN 0x02000000 /* CBR overrun (?) [5211+] */
-#define AR5K_IMR_QCBRURN 0x04000000 /* CBR underrun (?) [5211+] */
-#define AR5K_IMR_QTRIG 0x08000000 /* [5211+] */
+#define AR5K_IMR_QCBRORN 0x02000000 /* QCU CBR overrun (?) [5211+] */
+#define AR5K_IMR_QCBRURN 0x04000000 /* QCU CBR underrun (?) [5211+] */
+#define AR5K_IMR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */
/*
* Secondary interrupt mask registers [5211+] (0 - 4)
@@ -414,13 +430,14 @@
#define AR5K_SIMR2_QCU_TXURN_S 0
#define AR5K_SIMR2_MCABT 0x00100000 /* Master Cycle Abort */
#define AR5K_SIMR2_SSERR 0x00200000 /* Signaled System Error */
-#define AR5K_SIMR2_DPERR 0x00400000 /* Det par Error (?) */
+#define AR5K_SIMR2_DPERR 0x00400000 /* Bus parity error */
#define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */
#define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */
#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */
#define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */
#define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */
#define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */
+#define AR5K_SIMR2_TSFOOR 0x80000000 /* TSF OOR (?) */
#define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */
#define AR5K_SIMR3_QCBRORN 0x000003ff /* Mask for QCBRORN */
@@ -586,15 +603,15 @@
#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */
#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */
#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */
-#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated (?) */
-#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* Time gated (?) */
-#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated (?) */
+#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */
+#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* TIMT gated */
+#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated */
#define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */
-#define AR5K_QCU_MISC_CBREXP 0x00000020 /* CBR expired (normal queue) */
-#define AR5K_QCU_MISC_CBREXP_BCN 0x00000040 /* CBR expired (beacon queue) */
+#define AR5K_QCU_MISC_CBREXP_DIS 0x00000020 /* Disable CBR expired counter (normal queue) */
+#define AR5K_QCU_MISC_CBREXP_BCN_DIS 0x00000040 /* Disable CBR expired counter (beacon queue) */
#define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */
-#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR threshold enabled */
-#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME enalbed */
+#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR expired threshold enabled */
+#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME expired or VEOL */
#define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */
#define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */
#define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */
@@ -663,6 +680,7 @@
#define AR5K_DCU_LCL_IFS_CW_MAX_S 10
#define AR5K_DCU_LCL_IFS_AIFS 0x0ff00000 /* Arbitrated Interframe Space */
#define AR5K_DCU_LCL_IFS_AIFS_S 20
+#define AR5K_DCU_LCL_IFS_AIFS_MAX 0xfc /* Anything above that can cause DCU to hang */
#define AR5K_QUEUE_DFS_LOCAL_IFS(_q) AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q)
/*
@@ -691,11 +709,7 @@
/*
* DCU misc registers [5211+]
*
- * For some of the registers i couldn't find in the code
- * (only backoff stuff is there realy) i tried to match the
- * names with 802.11e parameters etc, so i guess VIRTCOL here
- * means Virtual Collision and HCFPOLL means Hybrid Coordination
- * factor Poll (CF- Poll). Arbiter lockout control controls the
+ * Note: Arbiter lockout control controls the
* behaviour on low priority queues when we have multiple queues
* with pending frames. Intra-frame lockout means we wait until
* the queue's current frame transmits (with post frame backoff and bursting)
@@ -705,15 +719,20 @@
* No lockout means there is no special handling.
*/
#define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */
-#define AR5K_DCU_MISC_BACKOFF 0x000007ff /* Mask for backoff threshold */
+#define AR5K_DCU_MISC_BACKOFF 0x0000003f /* Mask for backoff threshold */
+#define AR5K_DCU_MISC_ETS_RTS_POL 0x00000040 /* End of transmission series
+ station RTS/data failure count
+ reset policy (?) */
+#define AR5K_DCU_MISC_ETS_CW_POL 0x00000080 /* End of transmission series
+ CW reset policy */
+#define AR5K_DCU_MISC_FRAG_WAIT 0x00000100 /* Wait for next fragment */
#define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */
#define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */
#define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */
#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */
#define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */
-#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0
-#define AR5K_DCU_MISC_VIRTCOL_MODIFIED 1
-#define AR5K_DCU_MISC_VIRTCOL_IGNORE 2
+#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0
+#define AR5K_DCU_MISC_VIRTCOL_IGNORE 1
#define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */
#define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */
#define AR5K_DCU_MISC_ARBLOCK_CTL_S 17
@@ -768,8 +787,9 @@
#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */
#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */
#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */
+#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S 10
#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */
-#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFC cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFS cnt reset policy (?) */
#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */
#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */
@@ -820,8 +840,6 @@
#define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband ?) [5210] */
#define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset [5210] */
#define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */
-#define AR5K_RESET_CTL_CHIP (AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA | \
- AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY)
/*
* Sleep control register
@@ -833,9 +851,11 @@
#define AR5K_SLEEP_CTL_SLE_S 16
#define AR5K_SLEEP_CTL_SLE_WAKE 0x00000000 /* Force chip awake */
#define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */
-#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000
+#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 /* Normal sleep policy */
#define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */
-/* more bits */
+#define AR5K_SLEEP_CTL_DUR_TIM_POL 0x00040000 /* Sleep duration timing policy */
+#define AR5K_SLEEP_CTL_DUR_WRITE_POL 0x00080000 /* Sleep duration write policy */
+#define AR5K_SLEEP_CTL_SLE_POL 0x00100000 /* Sleep policy mode */
/*
* Interrupt pending register
@@ -851,27 +871,28 @@
/*
* PCI configuration register
+ * TODO: Fix LED stuff
*/
#define AR5K_PCICFG 0x4010 /* Register Address */
#define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */
-#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock (?) */
+#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock */
#define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */
#define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */
#define AR5K_PCICFG_EESIZE_S 3
#define AR5K_PCICFG_EESIZE_4K 0 /* 4K */
#define AR5K_PCICFG_EESIZE_8K 1 /* 8K */
#define AR5K_PCICFG_EESIZE_16K 2 /* 16K */
-#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size (?) [5211+] */
+#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size [5211+] */
#define AR5K_PCICFG_LED 0x00000060 /* Led status [5211+] */
#define AR5K_PCICFG_LED_NONE 0x00000000 /* Default [5211+] */
#define AR5K_PCICFG_LED_PEND 0x00000020 /* Scan / Auth pending */
#define AR5K_PCICFG_LED_ASSOC 0x00000040 /* Associated */
#define AR5K_PCICFG_BUS_SEL 0x00000380 /* Mask for "bus select" [5211+] (?) */
-#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix (?) */
-#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep (?) */
+#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix */
+#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */
#define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */
-#define AR5K_PCICFG_UNK 0x00001000 /* Passed on some parts durring attach (?) */
-#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts (?) */
+#define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */
+#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts*/
#define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */
#define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */
#define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */
@@ -884,7 +905,8 @@
#define AR5K_PCICFG_LEDSTATE \
(AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \
AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW)
-#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate (field) */
+#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate */
+#define AR5K_PCICFG_SLEEP_CLOCK_RATE_S 24
/*
* "General Purpose Input/Output" (GPIO) control register
@@ -906,8 +928,8 @@
#define AR5K_GPIOCR 0x4014 /* Register Address */
#define AR5K_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */
-#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is off (?) */
-#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is on */
+#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is low */
+#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is high */
#define AR5K_GPIOCR_IN(n) (0 << ((n) * 2)) /* Mode 0 for pin n */
#define AR5K_GPIOCR_OUT0(n) (1 << ((n) * 2)) /* Mode 1 for pin n */
#define AR5K_GPIOCR_OUT1(n) (2 << ((n) * 2)) /* Mode 2 for pin n */
@@ -925,7 +947,6 @@
#define AR5K_GPIODI 0x401c
#define AR5K_GPIODI_M 0x0000002f
-
/*
* Silicon revision register
*/
@@ -935,7 +956,59 @@
#define AR5K_SREV_VER 0x000000ff /* Mask for version */
#define AR5K_SREV_VER_S 4
+/*
+ * TXE write posting register
+ */
+#define AR5K_TXEPOST 0x4028
+
+/*
+ * QCU sleep mask
+ */
+#define AR5K_QCU_SLEEP_MASK 0x402c
+
+/* 0x4068 is compression buffer configuration
+ * register on 5414 and pm configuration register
+ * on 5424 and newer pci-e chips. */
+
+/*
+ * Compression buffer configuration
+ * register (enable/disable) [5414]
+ */
+#define AR5K_5414_CBCFG 0x4068
+#define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */
+
+/*
+ * PCI-E Power managment configuration
+ * and status register [5424+]
+ */
+#define AR5K_PCIE_PM_CTL 0x4068 /* Register address */
+/* Only 5424 */
+#define AR5K_PCIE_PM_CTL_L1_WHEN_D2 0x00000001 /* enable PCIe core enter L1
+ when d2_sleep_en is asserted */
+#define AR5K_PCIE_PM_CTL_L0_L0S_CLEAR 0x00000002 /* Clear L0 and L0S counters */
+#define AR5K_PCIE_PM_CTL_L0_L0S_EN 0x00000004 /* Start L0 nd L0S counters */
+#define AR5K_PCIE_PM_CTL_LDRESET_EN 0x00000008 /* Enable reset when link goes
+ down */
+/* Wake On Wireless */
+#define AR5K_PCIE_PM_CTL_PME_EN 0x00000010 /* PME Enable */
+#define AR5K_PCIE_PM_CTL_AUX_PWR_DET 0x00000020 /* Aux power detect */
+#define AR5K_PCIE_PM_CTL_PME_CLEAR 0x00000040 /* Clear PME */
+#define AR5K_PCIE_PM_CTL_PSM_D0 0x00000080
+#define AR5K_PCIE_PM_CTL_PSM_D1 0x00000100
+#define AR5K_PCIE_PM_CTL_PSM_D2 0x00000200
+#define AR5K_PCIE_PM_CTL_PSM_D3 0x00000400
+
+/*
+ * PCI-E Workaround enable register
+ */
+#define AR5K_PCIE_WAEN 0x407c
+/*
+ * PCI-E Serializer/Desirializer
+ * registers
+ */
+#define AR5K_PCIE_SERDES 0x4080
+#define AR5K_PCIE_SERDES_RESET 0x4084
/*====EEPROM REGISTERS====*/
@@ -977,98 +1050,6 @@
#define AR5K_EEPROM_BASE 0x6000
/*
- * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE)
- */
-#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */
-#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */
-#define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */
-#define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */
-#define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */
-
-#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */
-#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */
-#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */
-#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */
-#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008
-#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */
-#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020
-#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */
-#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080
-#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */
-#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200
-#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */
-#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800
-#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */
-#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000
-#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */
-#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000
-#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */
-#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */
-#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE)
-#define AR5K_EEPROM_INFO_CKSUM 0xffff
-#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n))
-
-#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */
-#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */
-#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */
-#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */
-#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */
-#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */
-#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */
-#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */
-#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */
-#define AR5K_EEPROM_VERSION_4_3 0x4003
-#define AR5K_EEPROM_VERSION_4_4 0x4004
-#define AR5K_EEPROM_VERSION_4_5 0x4005
-#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */
-#define AR5K_EEPROM_VERSION_4_7 0x4007
-
-#define AR5K_EEPROM_MODE_11A 0
-#define AR5K_EEPROM_MODE_11B 1
-#define AR5K_EEPROM_MODE_11G 2
-
-#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */
-#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1)
-#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1)
-#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1)
-#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */
-#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */
-#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7)
-#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz (?) */
-#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */
-
-#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c
-#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2
-#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002
-#define AR5K_EEPROM_RFKILL_POLARITY_S 1
-
-/* Newer EEPROMs are using a different offset */
-#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
- (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
-
-#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3)
-#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((int8_t)(((_v) >> 8) & 0xff))
-#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((int8_t)((_v) & 0xff))
-
-/* calibration settings */
-#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4)
-#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2)
-#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d)
-#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */
-
-/* [3.1 - 3.3] */
-#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec
-#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed
-
-/* Misc values available since EEPROM 4.0 */
-#define AR5K_EEPROM_MISC0 0x00c4
-#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff)
-#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3)
-#define AR5K_EEPROM_MISC1 0x00c5
-#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff)
-#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1)
-
-/*
* EEPROM data register
*/
#define AR5K_EEPROM_DATA_5211 0x6004
@@ -1100,14 +1081,28 @@
* EEPROM config register
*/
#define AR5K_EEPROM_CFG 0x6010 /* Register Addres */
-#define AR5K_EEPROM_CFG_SIZE_OVR 0x00000001
+#define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */
+#define AR5K_EEPROM_CFG_SIZE_AUTO 0
+#define AR5K_EEPROM_CFG_SIZE_4KBIT 1
+#define AR5K_EEPROM_CFG_SIZE_8KBIT 2
+#define AR5K_EEPROM_CFG_SIZE_16KBIT 3
#define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */
#define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */
-#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protectio key */
+#define AR5K_EEPROM_CFG_CLK_RATE_S 3
+#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ 0
+#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ 1
+#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ 2
+#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protection key */
+#define AR5K_EEPROM_CFG_PROT_KEY_S 8
#define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */
/*
+ * TODO: Wake On Wireless registers
+ * Range 0x7000 - 0x7ce0
+ */
+
+/*
* Protocol Control Unit (PCU) registers
*/
/*
@@ -1139,11 +1134,13 @@
#define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */
#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */
#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS */
-#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate (for ACK/CTS ?) [5211+] */
-#define AR5K_STA_ID1_SELF_GEN_SECTORE 0x04000000 /* Self generate sectore (?) */
+#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate for ACK/CTS [5211+] */
+#define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */
#define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */
-#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Keysearch mode (?) */
+#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */
#define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */
+#define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */
+#define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */
/*
* First BSSID register (MAC address, lower 32bits)
@@ -1402,16 +1399,16 @@
#define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040
#define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211)
-#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100
+#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Corrupted FCS */
#define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080
#define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211)
-#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200
+#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Dump channel info */
#define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100
#define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211)
-#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 /* Enable scrambler seed */
-#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 /* Enable fixed scrambler seed */
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200
#define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211)
#define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */
@@ -1420,12 +1417,15 @@
#define AR5K_DIAG_SW_SCRAM_SEED_S 10
#define AR5K_DIAG_SW_DIS_SEQ_INC 0x00040000 /* Disable seqnum increment (?)[5210] */
#define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000
-#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000
+#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 /* Accept frames of non-zero protocol number */
#define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211)
-#define AR5K_DIAG_SW_OBSPT_M 0x000c0000
+#define AR5K_DIAG_SW_OBSPT_M 0x000c0000 /* Observation point select (?) */
#define AR5K_DIAG_SW_OBSPT_S 18
-/* more bits */
+#define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x0010000 /* Force RX Clear high */
+#define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x0020000 /* Ignore virtual carrier sense */
+#define AR5K_DIAG_SW_CHANEL_IDLE_HIGH 0x0040000 /* Force channel idle high */
+#define AR5K_DIAG_SW_PHEAR_ME 0x0080000 /* ??? */
/*
* TSF (clock) register (lower 32 bits)
@@ -1636,16 +1636,16 @@
*
* XXX: PCDAC steps (0.5dbm) or DBM ?
*
- * XXX: Mask changes for newer chips to 7f
- * like tx power table ?
*/
#define AR5K_TXPC 0x80e8 /* Register Address */
-#define AR5K_TXPC_ACK_M 0x0000003f /* Mask for ACK tx power */
+#define AR5K_TXPC_ACK_M 0x0000003f /* ACK tx power */
#define AR5K_TXPC_ACK_S 0
-#define AR5K_TXPC_CTS_M 0x00003f00 /* Mask for CTS tx power */
+#define AR5K_TXPC_CTS_M 0x00003f00 /* CTS tx power */
#define AR5K_TXPC_CTS_S 8
-#define AR5K_TXPC_CHIRP_M 0x003f0000 /* Mask for CHIRP tx power */
-#define AR5K_TXPC_CHIRP_S 22
+#define AR5K_TXPC_CHIRP_M 0x003f0000 /* CHIRP tx power */
+#define AR5K_TXPC_CHIRP_S 16
+#define AR5K_TXPC_DOPPLER 0x0f000000 /* Doppler chirp span (?) */
+#define AR5K_TXPC_DOPPLER_S 24
/*
* Profile count registers
@@ -1656,14 +1656,19 @@
#define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle count (?) */
/*
- * Quiet (period) control registers (?)
+ * Quiet period control registers
*/
#define AR5K_QUIET_CTL1 0x80fc /* Register Address */
-#define AR5K_QUIET_CTL1_NEXT_QT 0x0000ffff /* Mask for next quiet (period?) (?) */
-#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet (period?) */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF 0x0000ffff /* Next quiet period TSF (TU) */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S 0
+#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet period */
+#define AR5K_QUIET_CTL1_ACK_CTS_EN 0x00020000 /* Send ACK/CTS during quiet period */
+
#define AR5K_QUIET_CTL2 0x8100 /* Register Address */
-#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period (?) */
-#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet duration (?) */
+#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period periodicity */
+#define AR5K_QUIET_CTL2_QT_PER_S 0
+#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet period duration */
+#define AR5K_QUIET_CTL2_QT_DUR_S 16
/*
* TSF parameter register
@@ -1673,12 +1678,15 @@
#define AR5K_TSF_PARM_INC_S 0
/*
- * QoS register (?)
+ * QoS NOACK policy
*/
-#define AR5K_QOS 0x8108 /* Register Address */
-#define AR5K_QOS_NOACK_2BIT_VALUES 0x00000000 /* (field) */
-#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000020 /* (field) */
-#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000080 /* (field) */
+#define AR5K_QOS_NOACK 0x8108 /* Register Address */
+#define AR5K_QOS_NOACK_2BIT_VALUES 0x0000000f /* ??? */
+#define AR5K_QOS_NOACK_2BIT_VALUES_S 0
+#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000070 /* ??? */
+#define AR5K_QOS_NOACK_BIT_OFFSET_S 4
+#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000180 /* ??? */
+#define AR5K_QOS_NOACK_BYTE_OFFSET_S 8
/*
* PHY error filter register
@@ -1702,29 +1710,15 @@
/*
* MIC QoS control register (?)
*/
-#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */
-#define AR5K_MIC_QOS_CTL_0 0x00000001 /* MIC QoS control 0 (?) */
-#define AR5K_MIC_QOS_CTL_1 0x00000004 /* MIC QoS control 1 (?) */
-#define AR5K_MIC_QOS_CTL_2 0x00000010 /* MIC QoS control 2 (?) */
-#define AR5K_MIC_QOS_CTL_3 0x00000040 /* MIC QoS control 3 (?) */
-#define AR5K_MIC_QOS_CTL_4 0x00000100 /* MIC QoS control 4 (?) */
-#define AR5K_MIC_QOS_CTL_5 0x00000400 /* MIC QoS control 5 (?) */
-#define AR5K_MIC_QOS_CTL_6 0x00001000 /* MIC QoS control 6 (?) */
-#define AR5K_MIC_QOS_CTL_7 0x00004000 /* MIC QoS control 7 (?) */
-#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */
+#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */
+#define AR5K_MIC_QOS_CTL_OFF(_n) (1 << (_n * 2))
+#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */
/*
* MIC QoS select register (?)
*/
-#define AR5K_MIC_QOS_SEL 0x811c
-#define AR5K_MIC_QOS_SEL_0 0x00000001
-#define AR5K_MIC_QOS_SEL_1 0x00000010
-#define AR5K_MIC_QOS_SEL_2 0x00000100
-#define AR5K_MIC_QOS_SEL_3 0x00001000
-#define AR5K_MIC_QOS_SEL_4 0x00010000
-#define AR5K_MIC_QOS_SEL_5 0x00100000
-#define AR5K_MIC_QOS_SEL_6 0x01000000
-#define AR5K_MIC_QOS_SEL_7 0x10000000
+#define AR5K_MIC_QOS_SEL 0x811c
+#define AR5K_MIC_QOS_SEL_OFF(_n) (1 << (_n * 4))
/*
* Misc mode control register (?)
@@ -1759,6 +1753,11 @@
#define AR5K_TSF_THRES 0x813c
/*
+ * TODO: Wake On Wireless registers
+ * Range: 0x8147 - 0x818c
+ */
+
+/*
* Rate -> ACK SIFS mapping table (32 entries)
*/
#define AR5K_RATE_ACKSIFS_BASE 0x8680 /* Register Address */
@@ -1873,7 +1872,8 @@
*/
#define AR5K_PHY_TURBO 0x9804 /* Register Address */
#define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */
-#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Short mode (20Mhz channels) (?) */
+#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */
+#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo mimo */
/*
* PHY agility command register
@@ -1883,6 +1883,11 @@
#define AR5K_PHY_TST1 0x9808
#define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/
#define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */
+#define AR5K_PHY_TST1_TXSRC_SRC 0x00000002 /* Used with bit 7 (?) */
+#define AR5K_PHY_TST1_TXSRC_SRC_S 1
+#define AR5K_PHY_TST1_TXSRC_ALT 0x00000080 /* Set input to tsdac (?) */
+#define AR5K_PHY_TST1_TXSRC_ALT_S 7
+
/*
* PHY timing register 3 [5112+]
@@ -1907,15 +1912,23 @@
/*
* PHY RF control registers
- * (i think these are delay times,
- * these calibration values exist
- * in EEPROM)
*/
#define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */
-#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* Mask for TX frame to TX d(esc?) start */
+#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* TX frame to TX data start */
+#define AR5K_PHY_RF_CTL2_TXF2TXD_START_S 0
#define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */
-#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000000f /* Mask for TX end to XLNA on */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000000f /* TX end to XLNA on */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 0
+
+#define AR5K_PHY_ADC_CTL 0x982c
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF 0x00000003
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S 0
+#define AR5K_PHY_ADC_CTL_PWD_DAC_OFF 0x00002000
+#define AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF 0x00004000
+#define AR5K_PHY_ADC_CTL_PWD_ADC_OFF 0x00008000
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON 0x00030000
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S 16
#define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */
#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */
@@ -1937,35 +1950,43 @@
* PHY settling register
*/
#define AR5K_PHY_SETTLING 0x9844 /* Register Address */
-#define AR5K_PHY_SETTLING_AGC 0x0000007f /* Mask for AGC settling time */
-#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Mask for Switch settlig time */
+#define AR5K_PHY_SETTLING_AGC 0x0000007f /* AGC settling time */
+#define AR5K_PHY_SETTLING_AGC_S 0
+#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Switch settlig time */
+#define AR5K_PHY_SETTLINK_SWITCH_S 7
/*
* PHY Gain registers
*/
#define AR5K_PHY_GAIN 0x9848 /* Register Address */
-#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* Mask for TX-RX Attenuation */
+#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* TX-RX Attenuation */
+#define AR5K_PHY_GAIN_TXRX_ATTEN_S 12
+#define AR5K_PHY_GAIN_TXRX_RF_MAX 0x007c0000
+#define AR5K_PHY_GAIN_TXRX_RF_MAX_S 18
#define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */
#define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */
/*
- * Desired size register
+ * Desired ADC/PGA size register
* (for more infos read ANI patent)
*/
#define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */
-#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* Mask for ADC desired size */
-#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* Mask for PGA desired size */
-#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Mask for Total desired size (?) */
+#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* ADC desired size */
+#define AR5K_PHY_DESIRED_SIZE_ADC_S 0
+#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* PGA desired size */
+#define AR5K_PHY_DESIRED_SIZE_PGA_S 8
+#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Total desired size */
+#define AR5K_PHY_DESIRED_SIZE_TOT_S 20
/*
* PHY signal register
* (for more infos read ANI patent)
*/
#define AR5K_PHY_SIG 0x9858 /* Register Address */
-#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* Mask for FIRSTEP */
+#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* FIRSTEP */
#define AR5K_PHY_SIG_FIRSTEP_S 12
-#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* Mask for FIPWR */
+#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* FIPWR */
#define AR5K_PHY_SIG_FIRPWR_S 18
/*
@@ -1973,9 +1994,9 @@
* (for more infos read ANI patent)
*/
#define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */
-#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* Mask for AGC Coarse low */
+#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* AGC Coarse low */
#define AR5K_PHY_AGCCOARSE_LO_S 7
-#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* Mask for AGC Coarse high */
+#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* AGC Coarse high */
#define AR5K_PHY_AGCCOARSE_HI_S 15
/*
@@ -1984,6 +2005,8 @@
#define AR5K_PHY_AGCCTL 0x9860 /* Register address */
#define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */
#define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */
+#define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */
+#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */
/*
* PHY noise floor status register
@@ -1994,7 +2017,10 @@
#define AR5K_PHY_NF_RVAL(_n) (((_n) >> 19) & AR5K_PHY_NF_M)
#define AR5K_PHY_NF_AVAL(_n) (-((_n) ^ AR5K_PHY_NF_M) + 1)
#define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9))
-#define AR5K_PHY_NF_THRESH62 0x00001000 /* Thresh62 -check ANI patent- (field) */
+#define AR5K_PHY_NF_THRESH62 0x0007f000 /* Thresh62 -check ANI patent- (field) */
+#define AR5K_PHY_NF_THRESH62_S 12
+#define AR5K_PHY_NF_MINCCA_PWR 0x0ff80000 /* ??? */
+#define AR5K_PHY_NF_MINCCA_PWR_S 19
/*
* PHY ADC saturation register [5110]
@@ -2034,24 +2060,31 @@
*/
#define AR5K_PHY_SCR 0x9870
#define AR5K_PHY_SCR_32MHZ 0x0000001f
+
#define AR5K_PHY_SLMT 0x9874
#define AR5K_PHY_SLMT_32MHZ 0x0000007f
+
#define AR5K_PHY_SCAL 0x9878
#define AR5K_PHY_SCAL_32MHZ 0x0000000e
+
/*
* PHY PLL (Phase Locked Loop) control register
*/
#define AR5K_PHY_PLL 0x987c
-#define AR5K_PHY_PLL_20MHZ 0x13 /* For half rate (?) [5111+] */
-#define AR5K_PHY_PLL_40MHZ_5211 0x18 /* For 802.11a */
+#define AR5K_PHY_PLL_20MHZ 0x00000013 /* For half rate (?) */
+/* 40MHz -> 5GHz band */
+#define AR5K_PHY_PLL_40MHZ_5211 0x00000018
#define AR5K_PHY_PLL_40MHZ_5212 0x000000aa
+#define AR5K_PHY_PLL_40MHZ_5413 0x00000004
#define AR5K_PHY_PLL_40MHZ (ah->ah_version == AR5K_AR5211 ? \
AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212)
-#define AR5K_PHY_PLL_44MHZ_5211 0x19 /* For 802.11b/g */
+/* 44MHz -> 2.4GHz band */
+#define AR5K_PHY_PLL_44MHZ_5211 0x00000019
#define AR5K_PHY_PLL_44MHZ_5212 0x000000ab
#define AR5K_PHY_PLL_44MHZ (ah->ah_version == AR5K_AR5211 ? \
AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212)
+
#define AR5K_PHY_PLL_RF5111 0x00000000
#define AR5K_PHY_PLL_RF5112 0x00000040
#define AR5K_PHY_PLL_HALF_RATE 0x00000100
@@ -2118,6 +2151,19 @@
#define AR5K_PHY_RFSTG_DISABLE 0x00000021
/*
+ * BIN masks (?)
+ */
+#define AR5K_PHY_BIN_MASK_1 0x9900
+#define AR5K_PHY_BIN_MASK_2 0x9904
+#define AR5K_PHY_BIN_MASK_3 0x9908
+
+#define AR5K_PHY_BIN_MASK_CTL 0x990c
+#define AR5K_PHY_BIN_MASK_CTL_MASK_4 0x00003fff
+#define AR5K_PHY_BIN_MASK_CTL_MASK_4_S 0
+#define AR5K_PHY_BIN_MASK_CTL_RATE 0xff000000
+#define AR5K_PHY_BIN_MASK_CTL_RATE_S 24
+
+/*
* PHY Antenna control register
*/
#define AR5K_PHY_ANT_CTL 0x9910 /* Register Address */
@@ -2164,6 +2210,7 @@
#define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */
+#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 0
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */
#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */
#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */
@@ -2210,7 +2257,6 @@
#define AR5K_PHY_PAPD_PROBE_INI_5111 0x00004883 /* [5212+] */
#define AR5K_PHY_PAPD_PROBE_INI_5112 0x00004882 /* [5212+] */
-
/*
* PHY TX rate power registers [5112+]
*/
@@ -2232,6 +2278,8 @@
#define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */
#define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3
#define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */
+#define AR5K_PHY_FRAME_CTL_EMU 0x80000000
+#define AR5K_PHY_FRAME_CTL_EMU_S 31
/*---[5110/5111]---*/
#define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */
#define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */
@@ -2250,48 +2298,36 @@
* PHY radar detection register [5111+]
*/
#define AR5K_PHY_RADAR 0x9954
-
-/* Radar enable ........ ........ ........ .......1 */
#define AR5K_PHY_RADAR_ENABLE 0x00000001
-#define AR5K_PHY_RADAR_DISABLE 0x00000000
-#define AR5K_PHY_RADAR_ENABLE_S 0
-
-/* This is the value found on the card .1.111.1 .1.1.... 111....1 1...1...
-at power on. */
-#define AR5K_PHY_RADAR_PWONDEF_AR5213 0x5d50e188
-
-/* This is the value found on the card .1.1.111 ..11...1 .1...1.1 1...11.1
-after DFS is enabled */
-#define AR5K_PHY_RADAR_ENABLED_AR5213 0x5731458d
-
-/* Finite Impulse Response (FIR) filter .1111111 ........ ........ ........
- * power out threshold.
- * 7-bits, standard power range {0..127} in 1/2 dBm units. */
-#define AR5K_PHY_RADAR_FIRPWROUTTHR 0x7f000000
-#define AR5K_PHY_RADAR_FIRPWROUTTHR_S 24
-
-/* Radar RSSI/SNR threshold. ........ 111111.. ........ ........
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_RADARRSSITHR 0x00fc0000
-#define AR5K_PHY_RADAR_RADARRSSITHR_S 18
-
-/* Pulse height threshold ........ ......11 1111.... ........
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_PULSEHEIGHTTHR 0x0003f000
-#define AR5K_PHY_RADAR_PULSEHEIGHTTHR_S 12
-
-/* Pulse RSSI/SNR threshold ........ ........ ....1111 11......
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_PULSERSSITHR 0x00000fc0
-#define AR5K_PHY_RADAR_PULSERSSITHR_S 6
-
-/* Inband threshold ........ ........ ........ ..11111.
- * 5-bits, units unknown {0..31} (? MHz ?) */
-#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e
+#define AR5K_PHY_RADAR_DISABLE 0x00000000
+#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold
+ 5-bits, units unknown {0..31}
+ (? MHz ?) */
#define AR5K_PHY_RADAR_INBANDTHR_S 1
+#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold
+ 6-bits, dBm range {0..63}
+ in dBm units. */
+#define AR5K_PHY_RADAR_PRSSI_THR_S 6
+
+#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold
+ 6-bits, dBm range {0..63}
+ in dBm units. */
+#define AR5K_PHY_RADAR_PHEIGHT_THR_S 12
+
+#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold.
+ 6-bits, dBm range {0..63}
+ in dBm units. */
+#define AR5K_PHY_RADAR_RSSI_THR_S 18
+
+#define AR5K_PHY_RADAR_FIRPWR_THR 0x7f000000 /* Finite Impulse Response
+ filter power out threshold.
+ 7-bits, standard power range
+ {0..127} in 1/2 dBm units. */
+#define AR5K_PHY_RADAR_FIRPWR_THRS 24
+
/*
- * PHY antenna switch table registers [5110]
+ * PHY antenna switch table registers
*/
#define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960
#define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964
@@ -2302,25 +2338,65 @@ after DFS is enabled */
#define AR5K_PHY_NFTHRES 0x9968
/*
- * PHY clock sleep registers [5112+]
+ * Sigma Delta register (?) [5213]
*/
-#define AR5K_PHY_SCLOCK 0x99f0
-#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c
-#define AR5K_PHY_SDELAY 0x99f4
-#define AR5K_PHY_SDELAY_32MHZ 0x000000ff
-#define AR5K_PHY_SPENDING 0x99f8
-#define AR5K_PHY_SPENDING_14 0x00000014
-#define AR5K_PHY_SPENDING_18 0x00000018
-#define AR5K_PHY_SPENDING_RF5111 0x00000018
-#define AR5K_PHY_SPENDING_RF5112 0x00000014
-/* #define AR5K_PHY_SPENDING_RF5112A 0x0000000e */
-/* #define AR5K_PHY_SPENDING_RF5424 0x00000012 */
-#define AR5K_PHY_SPENDING_RF5413 0x00000014
-#define AR5K_PHY_SPENDING_RF2413 0x00000014
-#define AR5K_PHY_SPENDING_RF2425 0x00000018
+#define AR5K_PHY_SIGMA_DELTA 0x996C
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL 0x00000003
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S 0
+#define AR5K_PHY_SIGMA_DELTA_FILT2 0x000000f8
+#define AR5K_PHY_SIGMA_DELTA_FILT2_S 3
+#define AR5K_PHY_SIGMA_DELTA_FILT1 0x00001f00
+#define AR5K_PHY_SIGMA_DELTA_FILT1_S 8
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ff3000
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13
+
+/*
+ * RF restart register [5112+] (?)
+ */
+#define AR5K_PHY_RESTART 0x9970 /* restart */
+#define AR5K_PHY_RESTART_DIV_GC 0x001c0000 /* Fast diversity gc_limit (?) */
+#define AR5K_PHY_RESTART_DIV_GC_S 18
+
+/*
+ * RF Bus access request register (for synth-oly channel switching)
+ */
+#define AR5K_PHY_RFBUS_REQ 0x997C
+#define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001
+
+/*
+ * Spur mitigation masks (?)
+ */
+#define AR5K_PHY_TIMING_7 0x9980
+#define AR5K_PHY_TIMING_8 0x9984
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2 0x000fffff
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S 0
+
+#define AR5K_PHY_BIN_MASK2_1 0x9988
+#define AR5K_PHY_BIN_MASK2_2 0x998c
+#define AR5K_PHY_BIN_MASK2_3 0x9990
+
+#define AR5K_PHY_BIN_MASK2_4 0x9994
+#define AR5K_PHY_BIN_MASK2_4_MASK_4 0x00003fff
+#define AR5K_PHY_BIN_MASK2_4_MASK_4_S 0
+
+#define AR_PHY_TIMING_9 0x9998
+#define AR_PHY_TIMING_10 0x999c
+#define AR_PHY_TIMING_10_PILOT_MASK_2 0x000fffff
+#define AR_PHY_TIMING_10_PILOT_MASK_2_S 0
+
+/*
+ * Spur mitigation control
+ */
+#define AR_PHY_TIMING_11 0x99a0 /* Register address */
+#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */
+#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0
+#define AR_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */
+#define AR_PHY_TIMING_11_SPUR_FREQ_SD_S 20
+#define AR_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */
+#define AR_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */
/*
- * Misc PHY/radio registers [5110 - 5111]
+ * Gain tables
*/
#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */
#define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2))
@@ -2340,9 +2416,10 @@ after DFS is enabled */
#define AR5K_PHY_CURRENT_RSSI 0x9c1c
/*
- * PHY RF Bus grant register (?)
+ * PHY RF Bus grant register
*/
#define AR5K_PHY_RFBUS_GRANT 0x9c20
+#define AR5K_PHY_RFBUS_GRANT_OK 0x00000001
/*
* PHY ADC test register
@@ -2386,6 +2463,31 @@ after DFS is enabled */
#define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008
/*
+ * Heavy clip enable register
+ */
+#define AR5K_PHY_HEAVY_CLIP_ENABLE 0x99e0
+
+/*
+ * PHY clock sleep registers [5112+]
+ */
+#define AR5K_PHY_SCLOCK 0x99f0
+#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c
+#define AR5K_PHY_SDELAY 0x99f4
+#define AR5K_PHY_SDELAY_32MHZ 0x000000ff
+#define AR5K_PHY_SPENDING 0x99f8
+#define AR5K_PHY_SPENDING_14 0x00000014
+#define AR5K_PHY_SPENDING_18 0x00000018
+#define AR5K_PHY_SPENDING_RF5111 0x00000018
+#define AR5K_PHY_SPENDING_RF5112 0x00000014
+/* #define AR5K_PHY_SPENDING_RF5112A 0x0000000e */
+/* #define AR5K_PHY_SPENDING_RF5424 0x00000012 */
+#define AR5K_PHY_SPENDING_RF5413 0x00000018
+#define AR5K_PHY_SPENDING_RF2413 0x00000018
+#define AR5K_PHY_SPENDING_RF2316 0x00000018
+#define AR5K_PHY_SPENDING_RF2317 0x00000018
+#define AR5K_PHY_SPENDING_RF2425 0x00000014
+
+/*
* PHY PAPD I (power?) table (?)
* (92! entries)
*/
@@ -2436,10 +2538,47 @@ after DFS is enabled */
#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000000f
#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0
+/* Same address is used for antenna diversity activation */
+#define AR5K_PHY_FAST_ANT_DIV 0xa208
+#define AR5K_PHY_FAST_ANT_DIV_EN 0x00002000
+
/*
* PHY 2GHz gain register [5111+]
*/
-#define AR5K_PHY_GAIN_2GHZ 0xa20c
-#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000
+#define AR5K_PHY_GAIN_2GHZ 0xa20c
+#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000
#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S 18
-#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c
+#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c
+
+#define AR5K_PHY_CCK_RX_CTL_4 0xa21c
+#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT 0x01f80000
+#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S 19
+
+#define AR5K_PHY_DAG_CCK_CTL 0xa228
+#define AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR 0x00000200
+#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR 0x0001fc00
+#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S 10
+
+#define AR5K_PHY_FAST_ADC 0xa24c
+
+#define AR5K_PHY_BLUETOOTH 0xa254
+
+/*
+ * Transmit Power Control register
+ * [2413+]
+ */
+#define AR5K_PHY_TPC_RG1 0xa258
+#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000
+#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14
+
+#define AR5K_PHY_TPC_RG5 0xa26C
+#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F
+#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S 0
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1 0x000003F0
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S 4
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2 0x0000FC00
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S 10
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3 0x003F0000
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S 16
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4 0x0FC00000
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S 22