summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath9k/rc.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath9k/rc.h')
-rw-r--r--drivers/net/wireless/ath9k/rc.h220
1 files changed, 48 insertions, 172 deletions
diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h
index b95b41508b98..97c60d12e8aa 100644
--- a/drivers/net/wireless/ath9k/rc.h
+++ b/drivers/net/wireless/ath9k/rc.h
@@ -20,84 +20,24 @@
#define RC_H
#include "ath9k.h"
-/*
- * Interface definitions for transmit rate control modules for the
- * Atheros driver.
- *
- * A rate control module is responsible for choosing the transmit rate
- * for each data frame. Management+control frames are always sent at
- * a fixed rate.
- *
- * Only one module may be present at a time; the driver references
- * rate control interfaces by symbol name. If multiple modules are
- * to be supported we'll need to switch to a registration-based scheme
- * as is currently done, for example, for authentication modules.
- *
- * An instance of the rate control module is attached to each device
- * at attach time and detached when the device is destroyed. The module
- * may associate data with each device and each node (station). Both
- * sets of storage are opaque except for the size of the per-node storage
- * which must be provided when the module is attached.
- *
- * The rate control module is notified for each state transition and
- * station association/reassociation. Otherwise it is queried for a
- * rate for each outgoing frame and provided status from each transmitted
- * frame. Any ancillary processing is the responsibility of the module
- * (e.g. if periodic processing is required then the module should setup
- * it's own timer).
- *
- * In addition to the transmit rate for each frame the module must also
- * indicate the number of attempts to make at the specified rate. If this
- * number is != ATH_TXMAXTRY then an additional callback is made to setup
- * additional transmit state. The rate control code is assumed to write
- * this additional data directly to the transmit descriptor.
- */
struct ath_softc;
-#define TRUE 1
-#define FALSE 0
+#define ATH_RATE_MAX 30
+#define RATE_TABLE_SIZE 64
+#define MAX_TX_RATE_PHY 48
-#define ATH_RATE_MAX 30
-#define MCS_SET_SIZE 128
+/* VALID_ALL - valid for 20/40/Legacy,
+ * VALID - Legacy only,
+ * VALID_20 - HT 20 only,
+ * VALID_40 - HT 40 only */
-enum ieee80211_fixed_rate_mode {
- IEEE80211_FIXED_RATE_NONE = 0,
- IEEE80211_FIXED_RATE_MCS = 1 /* HT rates */
-};
-
-/*
- * Use the hal os glue code to get ms time
- */
-#define IEEE80211_RATE_IDX_ENTRY(val, idx) (((val&(0xff<<(idx*8)))>>(idx*8)))
-
-#define WLAN_PHY_HT_20_SS WLAN_RC_PHY_HT_20_SS
-#define WLAN_PHY_HT_20_DS WLAN_RC_PHY_HT_20_DS
-#define WLAN_PHY_HT_20_DS_HGI WLAN_RC_PHY_HT_20_DS_HGI
-#define WLAN_PHY_HT_40_SS WLAN_RC_PHY_HT_40_SS
-#define WLAN_PHY_HT_40_SS_HGI WLAN_RC_PHY_HT_40_SS_HGI
-#define WLAN_PHY_HT_40_DS WLAN_RC_PHY_HT_40_DS
-#define WLAN_PHY_HT_40_DS_HGI WLAN_RC_PHY_HT_40_DS_HGI
-
-#define WLAN_PHY_OFDM PHY_OFDM
-#define WLAN_PHY_CCK PHY_CCK
-
-#define TRUE_20 0x2
-#define TRUE_40 0x4
-#define TRUE_2040 (TRUE_20|TRUE_40)
-#define TRUE_ALL (TRUE_2040|TRUE)
-
-enum {
- WLAN_RC_PHY_HT_20_SS = 4,
- WLAN_RC_PHY_HT_20_DS,
- WLAN_RC_PHY_HT_40_SS,
- WLAN_RC_PHY_HT_40_DS,
- WLAN_RC_PHY_HT_20_SS_HGI,
- WLAN_RC_PHY_HT_20_DS_HGI,
- WLAN_RC_PHY_HT_40_SS_HGI,
- WLAN_RC_PHY_HT_40_DS_HGI,
- WLAN_RC_PHY_MAX
-};
+#define INVALID 0x0
+#define VALID 0x1
+#define VALID_20 0x2
+#define VALID_40 0x4
+#define VALID_2040 (VALID_20|VALID_40)
+#define VALID_ALL (VALID_2040|VALID)
#define WLAN_RC_PHY_DS(_phy) ((_phy == WLAN_RC_PHY_HT_20_DS) \
|| (_phy == WLAN_RC_PHY_HT_40_DS) \
@@ -114,26 +54,22 @@ enum {
#define WLAN_RC_PHY_HT(_phy) (_phy >= WLAN_RC_PHY_HT_20_SS)
-/* Returns the capflag mode */
#define WLAN_RC_CAP_MODE(capflag) (((capflag & WLAN_RC_HT_FLAG) ? \
- (capflag & WLAN_RC_40_FLAG) ? TRUE_40 : TRUE_20 : TRUE))
+ (capflag & WLAN_RC_40_FLAG) ? VALID_40 : VALID_20 : VALID))
/* Return TRUE if flag supports HT20 && client supports HT20 or
* return TRUE if flag supports HT40 && client supports HT40.
* This is used becos some rates overlap between HT20/HT40.
*/
-
-#define WLAN_RC_PHY_HT_VALID(flag, capflag) (((flag & TRUE_20) && !(capflag \
- & WLAN_RC_40_FLAG)) || ((flag & TRUE_40) && \
- (capflag & WLAN_RC_40_FLAG)))
+#define WLAN_RC_PHY_HT_VALID(flag, capflag) \
+ (((flag & VALID_20) && !(capflag & WLAN_RC_40_FLAG)) || \
+ ((flag & VALID_40) && (capflag & WLAN_RC_40_FLAG)))
#define WLAN_RC_DS_FLAG (0x01)
#define WLAN_RC_40_FLAG (0x02)
#define WLAN_RC_SGI_FLAG (0x04)
#define WLAN_RC_HT_FLAG (0x08)
-#define RATE_TABLE_SIZE 64
-
/**
* struct ath_rate_table - Rate Control table
* @valid: valid for use in rate control
@@ -150,10 +86,11 @@ enum {
* @max_4ms_framelen: maximum frame length(bytes) for tx duration
* @probe_interval: interval for rate control to probe for other rates
* @rssi_reduce_interval: interval for rate control to reduce rssi
- * @initial_ratemax: initial ratemax value used in ath_rc_sib_update()
+ * @initial_ratemax: initial ratemax value
*/
struct ath_rate_table {
int rate_cnt;
+ u8 rateCodeToIndex[256];
struct {
int valid;
int valid_single_stream;
@@ -171,42 +108,26 @@ struct ath_rate_table {
u8 sgi_index;
u8 ht_index;
u32 max_4ms_framelen;
+ u16 lpAckDuration;
+ u16 spAckDuration;
} info[RATE_TABLE_SIZE];
u32 probe_interval;
u32 rssi_reduce_interval;
u8 initial_ratemax;
};
-#define ATH_RC_PROBE_ALLOWED 0x00000001
-#define ATH_RC_MINRATE_LASTRATE 0x00000002
-
-struct ath_rc_series {
- u8 rix;
- u8 tries;
- u8 flags;
- u32 max_4ms_framelen;
-};
-
-/* rcs_flags definition */
-#define ATH_RC_DS_FLAG 0x01
-#define ATH_RC_CW40_FLAG 0x02 /* CW 40 */
-#define ATH_RC_SGI_FLAG 0x04 /* Short Guard Interval */
-#define ATH_RC_HT_FLAG 0x08 /* HT */
-#define ATH_RC_RTSCTS_FLAG 0x10 /* RTS-CTS */
-
-/*
- * State structures for new rate adaptation code
- */
-#define MAX_TX_RATE_TBL 64
-#define MAX_TX_RATE_PHY 48
-
struct ath_tx_ratectrl_state {
int8_t rssi_thres; /* required rssi for this rate (dB) */
u8 per; /* recent estimate of packet error rate (%) */
};
+struct ath_rateset {
+ u8 rs_nrates;
+ u8 rs_rates[ATH_RATE_MAX];
+};
+
/**
- * struct ath_tx_ratectrl - TX Rate control Information
+ * struct ath_rate_priv - Rate Control priv data
* @state: RC state
* @rssi_last: last ACK rssi
* @rssi_last_lookup: last ACK rssi used for lookup
@@ -225,9 +146,13 @@ struct ath_tx_ratectrl_state {
* @valid_phy_ratecnt: valid rate count
* @rate_max_phy: phy index for the max rate
* @probe_interval: interval for ratectrl to probe for other rates
+ * @prev_data_rix: rate idx of last data frame
+ * @ht_cap: HT capabilities
+ * @single_stream: When TRUE, only single TX stream possible
+ * @neg_rates: Negotatied rates
+ * @neg_ht_rates: Negotiated HT rates
*/
-struct ath_tx_ratectrl {
- struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL];
+struct ath_rate_priv {
int8_t rssi_last;
int8_t rssi_last_lookup;
int8_t rssi_last_prev;
@@ -237,89 +162,40 @@ struct ath_tx_ratectrl {
int32_t rssi_sum;
u8 rate_table_size;
u8 probe_rate;
- u32 rssi_time;
- u32 rssi_down_time;
- u32 probe_time;
u8 hw_maxretry_pktcnt;
u8 max_valid_rate;
- u8 valid_rate_index[MAX_TX_RATE_TBL];
- u32 per_down_time;
-
- /* 11n state */
+ u8 valid_rate_index[RATE_TABLE_SIZE];
+ u8 ht_cap;
+ u8 single_stream;
u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX];
- u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][MAX_TX_RATE_TBL];
+ u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][RATE_TABLE_SIZE];
u8 rc_phy_mode;
u8 rate_max_phy;
+ u32 rssi_time;
+ u32 rssi_down_time;
+ u32 probe_time;
+ u32 per_down_time;
u32 probe_interval;
-};
-
-struct ath_rateset {
- u8 rs_nrates;
- u8 rs_rates[ATH_RATE_MAX];
-};
-
-/* per-device state */
-struct ath_rate_softc {
- /* phy tables that contain rate control data */
- const void *hw_rate_table[ATH9K_MODE_MAX];
-
- /* -1 or index of fixed rate */
- int fixedrix;
-};
-
-/* per-node state */
-struct ath_rate_node {
- struct ath_tx_ratectrl tx_ratectrl;
-
- /* rate idx of last data frame */
u32 prev_data_rix;
-
- /* ht capabilities */
- u8 ht_cap;
-
- /* When TRUE, only single stream Tx possible */
- u8 single_stream;
-
- /* Negotiated rates */
+ u32 tx_triglevel_max;
+ struct ath_tx_ratectrl_state state[RATE_TABLE_SIZE];
struct ath_rateset neg_rates;
-
- /* Negotiated HT rates */
struct ath_rateset neg_ht_rates;
-
struct ath_rate_softc *asc;
- struct ath_vap *avp;
};
-/* Driver data of ieee80211_tx_info */
struct ath_tx_info_priv {
- struct ath_rc_series rcs[4];
struct ath_tx_status tx;
int n_frames;
int n_bad_frames;
- u8 min_rate;
+ bool update_rc;
};
-/*
- * Attach/detach a rate control module.
- */
-struct ath_rate_softc *ath_rate_attach(struct ath_hal *ah);
-void ath_rate_detach(struct ath_rate_softc *asc);
-
-/*
- * Update/reset rate control state for 802.11 state transitions.
- * Important mostly as the analog to ath_rate_newassoc when operating
- * in station mode.
- */
-void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv);
-void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp);
-
-/*
- * Return rate index for given Dot11 Rate.
- */
-u8 ath_rate_findrateix(struct ath_softc *sc,
- u8 dot11_rate);
+#define ATH_TX_INFO_PRIV(tx_info) \
+ ((struct ath_tx_info_priv *)((tx_info)->rate_driver_data[0]))
-/* Routines to register/unregister rate control algorithm */
+void ath_rate_attach(struct ath_softc *sc);
+u8 ath_rate_findrateix(struct ath_softc *sc, u8 dot11_rate);
int ath_rate_control_register(void);
void ath_rate_control_unregister(void);