8 files changed, 350 insertions, 364 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/Makefile b/drivers/net/wireless/brcm80211/brcmfmac/Makefile
index 1d2ceac3a221..98e67c18f276 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/Makefile
+++ b/drivers/net/wireless/brcm80211/brcmfmac/Makefile
@@ -33,7 +33,7 @@ brcmfmac-objs += \
 		bcdc.o \
 		dhd_common.o \
 		dhd_linux.o \
-		nvram.o \
+		firmware.o \
 		btcoex.o
 brcmfmac-$(CONFIG_BRCMFMAC_SDIO) += \
 		dhd_sdio.o \
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
index c5dcd82e884b..7735328fff21 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
@@ -63,7 +63,6 @@ struct brcmf_bus_dcmd {
  */
 struct brcmf_bus_ops {
 	int (*preinit)(struct device *dev);
-	int (*init)(struct device *dev);
 	void (*stop)(struct device *dev);
 	int (*txdata)(struct device *dev, struct sk_buff *skb);
 	int (*txctl)(struct device *dev, unsigned char *msg, uint len);
@@ -114,11 +113,6 @@ static inline int brcmf_bus_preinit(struct brcmf_bus *bus)
 	return bus->ops->preinit(bus->dev);
 }
 
-static inline int brcmf_bus_init(struct brcmf_bus *bus)
-{
-	return bus->ops->init(bus->dev);
-}
-
 static inline void brcmf_bus_stop(struct brcmf_bus *bus)
 {
 	bus->ops->stop(bus->dev);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index 4cacc3d85212..09dd8c13d844 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -916,13 +916,6 @@ int brcmf_bus_start(struct device *dev)
 
 	brcmf_dbg(TRACE, "\n");
 
-	/* Bring up the bus */
-	ret = brcmf_bus_init(bus_if);
-	if (ret != 0) {
-		brcmf_err("brcmf_sdbrcm_bus_init failed %d\n", ret);
-		return ret;
-	}
-
 	/* add primary networking interface */
 	ifp = brcmf_add_if(drvr, 0, 0, "wlan%d", NULL);
 	if (IS_ERR(ifp))
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 13c89a0c4ba7..8fa0dbbbda72 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -42,7 +42,7 @@
 #include <soc.h>
 #include "sdio_host.h"
 #include "chip.h"
-#include "nvram.h"
+#include "firmware.h"
 
 #define DCMD_RESP_TIMEOUT  2000	/* In milli second */
 
@@ -632,43 +632,28 @@ static const struct brcmf_firmware_names brcmf_fwname_data[] = {
 	{ BCM4354_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4354) }
 };
 
-
-static const struct firmware *brcmf_sdio_get_fw(struct brcmf_sdio *bus,
-						  enum brcmf_firmware_type type)
+static const char *brcmf_sdio_get_fwname(struct brcmf_chip *ci,
+					 enum brcmf_firmware_type type)
 {
-	const struct firmware *fw;
-	const char *name;
-	int err, i;
+	int i;
 
 	for (i = 0; i < ARRAY_SIZE(brcmf_fwname_data); i++) {
-		if (brcmf_fwname_data[i].chipid == bus->ci->chip &&
-		    brcmf_fwname_data[i].revmsk & BIT(bus->ci->chiprev)) {
+		if (brcmf_fwname_data[i].chipid == ci->chip &&
+		    brcmf_fwname_data[i].revmsk & BIT(ci->chiprev)) {
 			switch (type) {
 			case BRCMF_FIRMWARE_BIN:
-				name = brcmf_fwname_data[i].bin;
-				break;
+				return brcmf_fwname_data[i].bin;
 			case BRCMF_FIRMWARE_NVRAM:
-				name = brcmf_fwname_data[i].nv;
-				break;
+				return brcmf_fwname_data[i].nv;
 			default:
 				brcmf_err("invalid firmware type (%d)\n", type);
 				return NULL;
 			}
-			goto found;
 		}
 	}
 	brcmf_err("Unknown chipid %d [%d]\n",
-		  bus->ci->chip, bus->ci->chiprev);
+		  ci->chip, ci->chiprev);
 	return NULL;
-
-found:
-	err = request_firmware(&fw, name, &bus->sdiodev->func[2]->dev);
-	if ((err) || (!fw)) {
-		brcmf_err("fail to request firmware %s (%d)\n", name, err);
-		return NULL;
-	}
-
-	return fw;
 }
 
 static void pkt_align(struct sk_buff *p, int len, int align)
@@ -3278,20 +3263,13 @@ static int brcmf_sdio_download_code_file(struct brcmf_sdio *bus,
 }
 
 static int brcmf_sdio_download_nvram(struct brcmf_sdio *bus,
-				     const struct firmware *nv)
+				     void *vars, u32 varsz)
 {
-	void *vars;
-	u32 varsz;
 	int address;
 	int err;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
-	vars = brcmf_nvram_strip(nv, &varsz);
-
-	if (vars == NULL)
-		return -EINVAL;
-
 	address = bus->ci->ramsize - varsz + bus->ci->rambase;
 	err = brcmf_sdiod_ramrw(bus->sdiodev, true, address, vars, varsz);
 	if (err)
@@ -3300,15 +3278,14 @@ static int brcmf_sdio_download_nvram(struct brcmf_sdio *bus,
 	else if (!brcmf_sdio_verifymemory(bus->sdiodev, address, vars, varsz))
 		err = -EIO;
 
-	brcmf_nvram_free(vars);
-
 	return err;
 }
 
-static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus)
+static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
+					const struct firmware *fw,
+					void *nvram, u32 nvlen)
 {
 	int bcmerror = -EFAULT;
-	const struct firmware *fw;
 	u32 rstvec;
 
 	sdio_claim_host(bus->sdiodev->func[1]);
@@ -3317,12 +3294,6 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus)
 	/* Keep arm in reset */
 	brcmf_chip_enter_download(bus->ci);
 
-	fw = brcmf_sdio_get_fw(bus, BRCMF_FIRMWARE_BIN);
-	if (fw == NULL) {
-		bcmerror = -ENOENT;
-		goto err;
-	}
-
 	rstvec = get_unaligned_le32(fw->data);
 	brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec);
 
@@ -3330,17 +3301,12 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus)
 	release_firmware(fw);
 	if (bcmerror) {
 		brcmf_err("dongle image file download failed\n");
+		brcmf_fw_nvram_free(nvram);
 		goto err;
 	}
 
-	fw = brcmf_sdio_get_fw(bus, BRCMF_FIRMWARE_NVRAM);
-	if (fw == NULL) {
-		bcmerror = -ENOENT;
-		goto err;
-	}
-
-	bcmerror = brcmf_sdio_download_nvram(bus, fw);
-	release_firmware(fw);
+	bcmerror = brcmf_sdio_download_nvram(bus, nvram, nvlen);
+	brcmf_fw_nvram_free(nvram);
 	if (bcmerror) {
 		brcmf_err("dongle nvram file download failed\n");
 		goto err;
@@ -3490,97 +3456,6 @@ done:
 	return err;
 }
 
-static int brcmf_sdio_bus_init(struct device *dev)
-{
-	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
-	struct brcmf_sdio *bus = sdiodev->bus;
-	int err, ret = 0;
-	u8 saveclk;
-
-	brcmf_dbg(TRACE, "Enter\n");
-
-	/* try to download image and nvram to the dongle */
-	if (bus_if->state == BRCMF_BUS_DOWN) {
-		bus->alp_only = true;
-		err = brcmf_sdio_download_firmware(bus);
-		if (err)
-			return err;
-		bus->alp_only = false;
-	}
-
-	if (!bus->sdiodev->bus_if->drvr)
-		return 0;
-
-	/* Start the watchdog timer */
-	bus->sdcnt.tickcnt = 0;
-	brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
-
-	sdio_claim_host(bus->sdiodev->func[1]);
-
-	/* Make sure backplane clock is on, needed to generate F2 interrupt */
-	brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
-	if (bus->clkstate != CLK_AVAIL)
-		goto exit;
-
-	/* Force clocks on backplane to be sure F2 interrupt propagates */
-	saveclk = brcmf_sdiod_regrb(bus->sdiodev,
-				    SBSDIO_FUNC1_CHIPCLKCSR, &err);
-	if (!err) {
-		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				  (saveclk | SBSDIO_FORCE_HT), &err);
-	}
-	if (err) {
-		brcmf_err("Failed to force clock for F2: err %d\n", err);
-		goto exit;
-	}
-
-	/* Enable function 2 (frame transfers) */
-	w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT,
-		  offsetof(struct sdpcmd_regs, tosbmailboxdata));
-	err = sdio_enable_func(bus->sdiodev->func[SDIO_FUNC_2]);
-
-
-	brcmf_dbg(INFO, "enable F2: err=%d\n", err);
-
-	/* If F2 successfully enabled, set core and enable interrupts */
-	if (!err) {
-		/* Set up the interrupt mask and enable interrupts */
-		bus->hostintmask = HOSTINTMASK;
-		w_sdreg32(bus, bus->hostintmask,
-			  offsetof(struct sdpcmd_regs, hostintmask));
-
-		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_WATERMARK, 8, &err);
-	} else {
-		/* Disable F2 again */
-		sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]);
-		ret = -ENODEV;
-	}
-
-	if (brcmf_chip_sr_capable(bus->ci)) {
-		brcmf_sdio_sr_init(bus);
-	} else {
-		/* Restore previous clock setting */
-		brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
-				  saveclk, &err);
-	}
-
-	if (ret == 0) {
-		ret = brcmf_sdiod_intr_register(bus->sdiodev);
-		if (ret != 0)
-			brcmf_err("intr register failed:%d\n", ret);
-	}
-
-	/* If we didn't come up, turn off backplane clock */
-	if (ret != 0)
-		brcmf_sdio_clkctl(bus, CLK_NONE, false);
-
-exit:
-	sdio_release_host(bus->sdiodev->func[1]);
-
-	return ret;
-}
-
 void brcmf_sdio_isr(struct brcmf_sdio *bus)
 {
 	brcmf_dbg(TRACE, "Enter\n");
@@ -4020,13 +3895,114 @@ brcmf_sdio_watchdog(unsigned long data)
 static struct brcmf_bus_ops brcmf_sdio_bus_ops = {
 	.stop = brcmf_sdio_bus_stop,
 	.preinit = brcmf_sdio_bus_preinit,
-	.init = brcmf_sdio_bus_init,
 	.txdata = brcmf_sdio_bus_txdata,
 	.txctl = brcmf_sdio_bus_txctl,
 	.rxctl = brcmf_sdio_bus_rxctl,
 	.gettxq = brcmf_sdio_bus_gettxq,
 };
 
+static void brcmf_sdio_firmware_callback(struct device *dev,
+					 const struct firmware *code,
+					 void *nvram, u32 nvram_len)
+{
+	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+	struct brcmf_sdio *bus = sdiodev->bus;
+	int err = 0;
+	u8 saveclk;
+
+	brcmf_dbg(TRACE, "Enter: dev=%s\n", dev_name(dev));
+
+	/* try to download image and nvram to the dongle */
+	if (bus_if->state == BRCMF_BUS_DOWN) {
+		bus->alp_only = true;
+		err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len);
+		if (err)
+			goto fail;
+		bus->alp_only = false;
+	}
+
+	if (!bus_if->drvr)
+		return;
+
+	/* Start the watchdog timer */
+	bus->sdcnt.tickcnt = 0;
+	brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
+
+	sdio_claim_host(sdiodev->func[1]);
+
+	/* Make sure backplane clock is on, needed to generate F2 interrupt */
+	brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
+	if (bus->clkstate != CLK_AVAIL)
+		goto release;
+
+	/* Force clocks on backplane to be sure F2 interrupt propagates */
+	saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err);
+	if (!err) {
+		brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				  (saveclk | SBSDIO_FORCE_HT), &err);
+	}
+	if (err) {
+		brcmf_err("Failed to force clock for F2: err %d\n", err);
+		goto release;
+	}
+
+	/* Enable function 2 (frame transfers) */
+	w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT,
+		  offsetof(struct sdpcmd_regs, tosbmailboxdata));
+	err = sdio_enable_func(sdiodev->func[SDIO_FUNC_2]);
+
+
+	brcmf_dbg(INFO, "enable F2: err=%d\n", err);
+
+	/* If F2 successfully enabled, set core and enable interrupts */
+	if (!err) {
+		/* Set up the interrupt mask and enable interrupts */
+		bus->hostintmask = HOSTINTMASK;
+		w_sdreg32(bus, bus->hostintmask,
+			  offsetof(struct sdpcmd_regs, hostintmask));
+
+		brcmf_sdiod_regwb(sdiodev, SBSDIO_WATERMARK, 8, &err);
+	} else {
+		/* Disable F2 again */
+		sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
+		goto release;
+	}
+
+	if (brcmf_chip_sr_capable(bus->ci)) {
+		brcmf_sdio_sr_init(bus);
+	} else {
+		/* Restore previous clock setting */
+		brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
+				  saveclk, &err);
+	}
+
+	if (err == 0) {
+		err = brcmf_sdiod_intr_register(sdiodev);
+		if (err != 0)
+			brcmf_err("intr register failed:%d\n", err);
+	}
+
+	/* If we didn't come up, turn off backplane clock */
+	if (err != 0)
+		brcmf_sdio_clkctl(bus, CLK_NONE, false);
+
+	sdio_release_host(sdiodev->func[1]);
+
+	err = brcmf_bus_start(dev);
+	if (err != 0) {
+		brcmf_err("dongle is not responding\n");
+		goto fail;
+	}
+	return;
+
+release:
+	sdio_release_host(sdiodev->func[1]);
+fail:
+	brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), err);
+	device_release_driver(dev);
+}
+
 struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 {
 	int ret;
@@ -4110,8 +4086,13 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 		goto fail;
 	}
 
+	/* Query the F2 block size, set roundup accordingly */
+	bus->blocksize = bus->sdiodev->func[2]->cur_blksize;
+	bus->roundup = min(max_roundup, bus->blocksize);
+
 	/* Allocate buffers */
 	if (bus->sdiodev->bus_if->maxctl) {
+		bus->sdiodev->bus_if->maxctl += bus->roundup;
 		bus->rxblen =
 		    roundup((bus->sdiodev->bus_if->maxctl + SDPCM_HDRLEN),
 			    ALIGNMENT) + bus->head_align;
@@ -4139,10 +4120,6 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 	bus->idletime = BRCMF_IDLE_INTERVAL;
 	bus->idleclock = BRCMF_IDLE_ACTIVE;
 
-	/* Query the F2 block size, set roundup accordingly */
-	bus->blocksize = bus->sdiodev->func[2]->cur_blksize;
-	bus->roundup = min(max_roundup, bus->blocksize);
-
 	/* SR state */
 	bus->sleeping = false;
 	bus->sr_enabled = false;
@@ -4150,10 +4127,14 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 	brcmf_sdio_debugfs_create(bus);
 	brcmf_dbg(INFO, "completed!!\n");
 
-	/* if firmware path present try to download and bring up bus */
-	ret = brcmf_bus_start(bus->sdiodev->dev);
+	ret = brcmf_fw_get_firmwares(sdiodev->dev, BRCMF_FW_REQUEST_NVRAM,
+				     brcmf_sdio_get_fwname(bus->ci,
+							   BRCMF_FIRMWARE_BIN),
+				     brcmf_sdio_get_fwname(bus->ci,
+							   BRCMF_FIRMWARE_NVRAM),
+				     brcmf_sdio_firmware_callback);
 	if (ret != 0) {
-		brcmf_err("dongle is not responding\n");
+		brcmf_err("async firmware request failed: %d\n", ret);
 		goto fail;
 	}
 
@@ -4173,9 +4154,7 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus)
 		/* De-register interrupt handler */
 		brcmf_sdiod_intr_unregister(bus->sdiodev);
 
-		if (bus->sdiodev->bus_if->drvr) {
-			brcmf_detach(bus->sdiodev->dev);
-		}
+		brcmf_detach(bus->sdiodev->dev);
 
 		cancel_work_sync(&bus->datawork);
 		if (bus->brcmf_wq)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/nvram.c b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
index 5c450d11dbc9..7b7d237c1ddb 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/nvram.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
@@ -16,10 +16,11 @@
 
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/device.h>
 #include <linux/firmware.h>
 
 #include "dhd_dbg.h"
-#include "nvram.h"
+#include "firmware.h"
 
 enum nvram_parser_state {
 	IDLE,
@@ -187,7 +188,7 @@ static int brcmf_init_nvram_parser(struct nvram_parser *nvp,
  * and converts newlines to NULs. Shortens buffer as needed and pads with NULs.
  * End of buffer is completed with token identifying length of buffer.
  */
-void *brcmf_nvram_strip(const struct firmware *nv, u32 *new_length)
+static void *brcmf_fw_nvram_strip(const struct firmware *nv, u32 *new_length)
 {
 	struct nvram_parser nvp;
 	u32 pad;
@@ -219,8 +220,113 @@ void *brcmf_nvram_strip(const struct firmware *nv, u32 *new_length)
 	return nvp.nvram;
 }
 
-void brcmf_nvram_free(void *nvram)
+void brcmf_fw_nvram_free(void *nvram)
 {
 	kfree(nvram);
 }
 
+struct brcmf_fw {
+	struct device *dev;
+	u16 flags;
+	const struct firmware *code;
+	const char *nvram_name;
+	void (*done)(struct device *dev, const struct firmware *fw,
+		     void *nvram_image, u32 nvram_len);
+};
+
+static void brcmf_fw_request_nvram_done(const struct firmware *fw, void *ctx)
+{
+	struct brcmf_fw *fwctx = ctx;
+	u32 nvram_length = 0;
+	void *nvram = NULL;
+
+	brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(fwctx->dev));
+	if (!fw && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL))
+		goto fail;
+
+	if (fw) {
+		nvram = brcmf_fw_nvram_strip(fw, &nvram_length);
+		release_firmware(fw);
+		if (!nvram && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL))
+			goto fail;
+	}
+
+	fwctx->done(fwctx->dev, fwctx->code, nvram, nvram_length);
+	kfree(fwctx);
+	return;
+
+fail:
+	brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev));
+	if (fwctx->code)
+		release_firmware(fwctx->code);
+	device_release_driver(fwctx->dev);
+	kfree(fwctx);
+}
+
+static void brcmf_fw_request_code_done(const struct firmware *fw, void *ctx)
+{
+	struct brcmf_fw *fwctx = ctx;
+	int ret;
+
+	brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(fwctx->dev));
+	if (!fw)
+		goto fail;
+
+	/* only requested code so done here */
+	if (!(fwctx->flags & BRCMF_FW_REQUEST_NVRAM)) {
+		fwctx->done(fwctx->dev, fw, NULL, 0);
+		kfree(fwctx);
+		return;
+	}
+	fwctx->code = fw;
+	ret = request_firmware_nowait(THIS_MODULE, true, fwctx->nvram_name,
+				      fwctx->dev, GFP_KERNEL, fwctx,
+				      brcmf_fw_request_nvram_done);
+
+	if (!ret)
+		return;
+
+	/* when nvram is optional call .done() callback here */
+	if (fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL) {
+		fwctx->done(fwctx->dev, fw, NULL, 0);
+		kfree(fwctx);
+		return;
+	}
+
+	/* failed nvram request */
+	release_firmware(fw);
+fail:
+	brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev));
+	device_release_driver(fwctx->dev);
+	kfree(fwctx);
+}
+
+int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
+			   const char *code, const char *nvram,
+			   void (*fw_cb)(struct device *dev,
+					 const struct firmware *fw,
+					 void *nvram_image, u32 nvram_len))
+{
+	struct brcmf_fw *fwctx;
+
+	brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(dev));
+	if (!fw_cb || !code)
+		return -EINVAL;
+
+	if ((flags & BRCMF_FW_REQUEST_NVRAM) && !nvram)
+		return -EINVAL;
+
+	fwctx = kzalloc(sizeof(*fwctx), GFP_KERNEL);
+	if (!fwctx)
+		return -ENOMEM;
+
+	fwctx->dev = dev;
+	fwctx->flags = flags;
+	fwctx->done = fw_cb;
+	if (flags & BRCMF_FW_REQUEST_NVRAM)
+		fwctx->nvram_name = nvram;
+
+	return request_firmware_nowait(THIS_MODULE, true, code, dev,
+				       GFP_KERNEL, fwctx,
+				       brcmf_fw_request_code_done);
+}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/nvram.h b/drivers/net/wireless/brcm80211/brcmfmac/firmware.h
index d454580928c9..6431bfd7afff 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/nvram.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.h
@@ -13,12 +13,24 @@
  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
-#ifndef BRCMFMAC_NVRAM_H
-#define BRCMFMAC_NVRAM_H
+#ifndef BRCMFMAC_FIRMWARE_H
+#define BRCMFMAC_FIRMWARE_H
 
+#define BRCMF_FW_REQUEST		0x000F
+#define  BRCMF_FW_REQUEST_NVRAM		0x0001
+#define BRCMF_FW_REQ_FLAGS		0x00F0
+#define  BRCMF_FW_REQ_NV_OPTIONAL	0x0010
 
-void *brcmf_nvram_strip(const struct firmware *nv, u32 *new_length);
-void brcmf_nvram_free(void *nvram);
-
+void brcmf_fw_nvram_free(void *nvram);
+/*
+ * Request firmware(s) asynchronously. When the asynchronous request
+ * fails it will not use the callback, but call device_release_driver()
+ * instead which will call the driver .remove() callback.
+ */
+int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
+			   const char *code, const char *nvram,
+			   void (*fw_cb)(struct device *dev,
+					 const struct firmware *fw,
+					 void *nvram_image, u32 nvram_len));
 
-#endif /* BRCMFMAC_NVRAM_H */
+#endif /* BRCMFMAC_FIRMWARE_H */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index 3ce0e7cfd027..6db51a666f61 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -25,6 +25,7 @@
 #include <dhd_bus.h>
 #include <dhd_dbg.h>
 
+#include "firmware.h"
 #include "usb_rdl.h"
 #include "usb.h"
 
@@ -61,12 +62,6 @@ struct brcmf_usb_image {
 	u8 *image;
 	int image_len;
 };
-static struct list_head fw_image_list;
-
-struct intr_transfer_buf {
-	u32 notification;
-	u32 reserved;
-};
 
 struct brcmf_usbdev_info {
 	struct brcmf_usbdev bus_pub; /* MUST BE FIRST */
@@ -75,7 +70,7 @@ struct brcmf_usbdev_info {
 	struct list_head rx_postq;
 	struct list_head tx_freeq;
 	struct list_head tx_postq;
-	uint rx_pipe, tx_pipe, intr_pipe, rx_pipe2;
+	uint rx_pipe, tx_pipe, rx_pipe2;
 
 	int rx_low_watermark;
 	int tx_low_watermark;
@@ -87,7 +82,7 @@ struct brcmf_usbdev_info {
 	struct brcmf_usbreq *tx_reqs;
 	struct brcmf_usbreq *rx_reqs;
 
-	u8 *image;	/* buffer for combine fw and nvram */
+	const u8 *image;	/* buffer for combine fw and nvram */
 	int image_len;
 
 	struct usb_device *usbdev;
@@ -104,10 +99,6 @@ struct brcmf_usbdev_info {
 	ulong ctl_op;
 
 	struct urb *bulk_urb; /* used for FW download */
-	struct urb *intr_urb; /* URB for interrupt endpoint */
-	int intr_size;          /* Size of interrupt message */
-	int interval;           /* Interrupt polling interval */
-	struct intr_transfer_buf intr; /* Data buffer for interrupt endpoint */
 };
 
 static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo,
@@ -531,39 +522,6 @@ brcmf_usb_state_change(struct brcmf_usbdev_info *devinfo, int state)
 	}
 }
 
-static void
-brcmf_usb_intr_complete(struct urb *urb)
-{
-	struct brcmf_usbdev_info *devinfo =
-			(struct brcmf_usbdev_info *)urb->context;
-	int err;
-
-	brcmf_dbg(USB, "Enter, urb->status=%d\n", urb->status);
-
-	if (devinfo == NULL)
-		return;
-
-	if (unlikely(urb->status)) {
-		if (urb->status == -ENOENT ||
-		    urb->status == -ESHUTDOWN ||
-		    urb->status == -ENODEV) {
-			brcmf_usb_state_change(devinfo,
-					       BRCMFMAC_USB_STATE_DOWN);
-		}
-	}
-
-	if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_DOWN) {
-		brcmf_err("intr cb when DBUS down, ignoring\n");
-		return;
-	}
-
-	if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) {
-		err = usb_submit_urb(devinfo->intr_urb, GFP_ATOMIC);
-		if (err)
-			brcmf_err("usb_submit_urb, err=%d\n", err);
-	}
-}
-
 static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb)
 {
 	struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
@@ -619,7 +577,6 @@ static int brcmf_usb_up(struct device *dev)
 {
 	struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
 	u16 ifnum;
-	int ret;
 
 	brcmf_dbg(USB, "Enter\n");
 	if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP)
@@ -628,23 +585,6 @@ static int brcmf_usb_up(struct device *dev)
 	/* Success, indicate devinfo is fully up */
 	brcmf_usb_state_change(devinfo, BRCMFMAC_USB_STATE_UP);
 
-	if (devinfo->intr_urb) {
-		usb_fill_int_urb(devinfo->intr_urb, devinfo->usbdev,
-			devinfo->intr_pipe,
-			&devinfo->intr,
-			devinfo->intr_size,
-			(usb_complete_t)brcmf_usb_intr_complete,
-			devinfo,
-			devinfo->interval);
-
-		ret = usb_submit_urb(devinfo->intr_urb, GFP_ATOMIC);
-		if (ret) {
-			brcmf_err("USB_SUBMIT_URB failed with status %d\n",
-				  ret);
-			return -EINVAL;
-		}
-	}
-
 	if (devinfo->ctl_urb) {
 		devinfo->ctl_in_pipe = usb_rcvctrlpipe(devinfo->usbdev, 0);
 		devinfo->ctl_out_pipe = usb_sndctrlpipe(devinfo->usbdev, 0);
@@ -681,8 +621,6 @@ static void brcmf_usb_down(struct device *dev)
 		return;
 
 	brcmf_usb_state_change(devinfo, BRCMFMAC_USB_STATE_DOWN);
-	if (devinfo->intr_urb)
-		usb_kill_urb(devinfo->intr_urb);
 
 	if (devinfo->ctl_urb)
 		usb_kill_urb(devinfo->ctl_urb);
@@ -1021,7 +959,7 @@ brcmf_usb_fw_download(struct brcmf_usbdev_info *devinfo)
 	}
 
 	err = brcmf_usb_dlstart(devinfo,
-		devinfo->image, devinfo->image_len);
+		(u8 *)devinfo->image, devinfo->image_len);
 	if (err == 0)
 		err = brcmf_usb_dlrun(devinfo);
 	return err;
@@ -1036,7 +974,6 @@ static void brcmf_usb_detach(struct brcmf_usbdev_info *devinfo)
 	brcmf_usb_free_q(&devinfo->rx_freeq, false);
 	brcmf_usb_free_q(&devinfo->tx_freeq, false);
 
-	usb_free_urb(devinfo->intr_urb);
 	usb_free_urb(devinfo->ctl_urb);
 	usb_free_urb(devinfo->bulk_urb);
 
@@ -1080,68 +1017,20 @@ static int check_file(const u8 *headers)
 	return -1;
 }
 
-static int brcmf_usb_get_fw(struct brcmf_usbdev_info *devinfo)
+static const char *brcmf_usb_get_fwname(struct brcmf_usbdev_info *devinfo)
 {
-	s8 *fwname;
-	const struct firmware *fw;
-	struct brcmf_usb_image *fw_image;
-	int err;
-
-	brcmf_dbg(USB, "Enter\n");
 	switch (devinfo->bus_pub.devid) {
 	case 43143:
-		fwname = BRCMF_USB_43143_FW_NAME;
-		break;
+		return BRCMF_USB_43143_FW_NAME;
 	case 43235:
 	case 43236:
 	case 43238:
-		fwname = BRCMF_USB_43236_FW_NAME;
-		break;
+		return BRCMF_USB_43236_FW_NAME;
 	case 43242:
-		fwname = BRCMF_USB_43242_FW_NAME;
-		break;
+		return BRCMF_USB_43242_FW_NAME;
 	default:
-		return -EINVAL;
-		break;
-	}
-	brcmf_dbg(USB, "Loading FW %s\n", fwname);
-	list_for_each_entry(fw_image, &fw_image_list, list) {
-		if (fw_image->fwname == fwname) {
-			devinfo->image = fw_image->image;
-			devinfo->image_len = fw_image->image_len;
-			return 0;
-		}
-	}
-	/* fw image not yet loaded. Load it now and add to list */
-	err = request_firmware(&fw, fwname, devinfo->dev);
-	if (!fw) {
-		brcmf_err("fail to request firmware %s\n", fwname);
-		return err;
-	}
-	if (check_file(fw->data) < 0) {
-		brcmf_err("invalid firmware %s\n", fwname);
-		return -EINVAL;
+		return NULL;
 	}
-
-	fw_image = kzalloc(sizeof(*fw_image), GFP_ATOMIC);
-	if (!fw_image)
-		return -ENOMEM;
-	INIT_LIST_HEAD(&fw_image->list);
-	list_add_tail(&fw_image->list, &fw_image_list);
-	fw_image->fwname = fwname;
-	fw_image->image = vmalloc(fw->size);
-	if (!fw_image->image)
-		return -ENOMEM;
-
-	memcpy(fw_image->image, fw->data, fw->size);
-	fw_image->image_len = fw->size;
-
-	release_firmware(fw);
-
-	devinfo->image = fw_image->image;
-	devinfo->image_len = fw_image->image_len;
-
-	return 0;
 }
 
 
@@ -1186,11 +1075,6 @@ struct brcmf_usbdev *brcmf_usb_attach(struct brcmf_usbdev_info *devinfo,
 		goto error;
 	devinfo->tx_freecount = ntxq;
 
-	devinfo->intr_urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!devinfo->intr_urb) {
-		brcmf_err("usb_alloc_urb (intr) failed\n");
-		goto error;
-	}
 	devinfo->ctl_urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!devinfo->ctl_urb) {
 		brcmf_err("usb_alloc_urb (ctl) failed\n");
@@ -1202,16 +1086,6 @@ struct brcmf_usbdev *brcmf_usb_attach(struct brcmf_usbdev_info *devinfo,
 		goto error;
 	}
 
-	if (!brcmf_usb_dlneeded(devinfo))
-		return &devinfo->bus_pub;
-
-	brcmf_dbg(USB, "Start fw downloading\n");
-	if (brcmf_usb_get_fw(devinfo))
-		goto error;
-
-	if (brcmf_usb_fw_download(devinfo))
-		goto error;
-
 	return &devinfo->bus_pub;
 
 error:
@@ -1222,18 +1096,77 @@ error:
 
 static struct brcmf_bus_ops brcmf_usb_bus_ops = {
 	.txdata = brcmf_usb_tx,
-	.init = brcmf_usb_up,
 	.stop = brcmf_usb_down,
 	.txctl = brcmf_usb_tx_ctlpkt,
 	.rxctl = brcmf_usb_rx_ctlpkt,
 };
 
+static int brcmf_usb_bus_setup(struct brcmf_usbdev_info *devinfo)
+{
+	int ret;
+
+	/* Attach to the common driver interface */
+	ret = brcmf_attach(devinfo->dev);
+	if (ret) {
+		brcmf_err("brcmf_attach failed\n");
+		return ret;
+	}
+
+	ret = brcmf_usb_up(devinfo->dev);
+	if (ret)
+		goto fail;
+
+	ret = brcmf_bus_start(devinfo->dev);
+	if (ret)
+		goto fail;
+
+	return 0;
+fail:
+	brcmf_detach(devinfo->dev);
+	return ret;
+}
+
+static void brcmf_usb_probe_phase2(struct device *dev,
+				   const struct firmware *fw,
+				   void *nvram, u32 nvlen)
+{
+	struct brcmf_bus *bus = dev_get_drvdata(dev);
+	struct brcmf_usbdev_info *devinfo;
+	int ret;
+
+	brcmf_dbg(USB, "Start fw downloading\n");
+	ret = check_file(fw->data);
+	if (ret < 0) {
+		brcmf_err("invalid firmware\n");
+		release_firmware(fw);
+		goto error;
+	}
+
+	devinfo = bus->bus_priv.usb->devinfo;
+	devinfo->image = fw->data;
+	devinfo->image_len = fw->size;
+
+	ret = brcmf_usb_fw_download(devinfo);
+	release_firmware(fw);
+	if (ret)
+		goto error;
+
+	ret = brcmf_usb_bus_setup(devinfo);
+	if (ret)
+		goto error;
+
+	return;
+error:
+	brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), ret);
+	device_release_driver(dev);
+}
+
 static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
 {
 	struct brcmf_bus *bus = NULL;
 	struct brcmf_usbdev *bus_pub = NULL;
-	int ret;
 	struct device *dev = devinfo->dev;
+	int ret;
 
 	brcmf_dbg(USB, "Enter\n");
 	bus_pub = brcmf_usb_attach(devinfo, BRCMF_USB_NRXQ, BRCMF_USB_NTXQ);
@@ -1256,21 +1189,16 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
 	bus->proto_type = BRCMF_PROTO_BCDC;
 	bus->always_use_fws_queue = true;
 
-	/* Attach to the common driver interface */
-	ret = brcmf_attach(dev);
-	if (ret) {
-		brcmf_err("brcmf_attach failed\n");
-		goto fail;
-	}
-
-	ret = brcmf_bus_start(dev);
-	if (ret) {
-		brcmf_err("dongle is not responding\n");
-		brcmf_detach(dev);
-		goto fail;
+	if (!brcmf_usb_dlneeded(devinfo)) {
+		ret = brcmf_usb_bus_setup(devinfo);
+		if (ret)
+			goto fail;
 	}
-
+	/* request firmware here */
+	brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL,
+			       brcmf_usb_probe_phase2);
 	return 0;
+
 fail:
 	/* Release resources in reverse order */
 	kfree(bus);
@@ -1358,9 +1286,6 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		goto fail;
 	}
 
-	endpoint_num = endpoint->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-	devinfo->intr_pipe = usb_rcvintpipe(usb, endpoint_num);
-
 	devinfo->rx_pipe = 0;
 	devinfo->rx_pipe2 = 0;
 	devinfo->tx_pipe = 0;
@@ -1392,16 +1317,9 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		}
 	}
 
-	/* Allocate interrupt URB and data buffer */
-	/* RNDIS says 8-byte intr, our old drivers used 4-byte */
-	if (IFEPDESC(usb, CONTROL_IF, 0).wMaxPacketSize == cpu_to_le16(16))
-		devinfo->intr_size = 8;
-	else
-		devinfo->intr_size = 4;
-
-	devinfo->interval = IFEPDESC(usb, CONTROL_IF, 0).bInterval;
-
-	if (usb->speed == USB_SPEED_HIGH)
+	if (usb->speed == USB_SPEED_SUPER)
+		brcmf_dbg(USB, "Broadcom super speed USB wireless device detected\n");
+	else if (usb->speed == USB_SPEED_HIGH)
 		brcmf_dbg(USB, "Broadcom high speed USB wireless device detected\n");
 	else
 		brcmf_dbg(USB, "Broadcom full speed USB wireless device detected\n");
@@ -1456,23 +1374,18 @@ static int brcmf_usb_resume(struct usb_interface *intf)
 	struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
 
 	brcmf_dbg(USB, "Enter\n");
-	if (!brcmf_attach(devinfo->dev))
-		return brcmf_bus_start(&usb->dev);
-
-	return 0;
+	return brcmf_usb_bus_setup(devinfo);
 }
 
 static int brcmf_usb_reset_resume(struct usb_interface *intf)
 {
 	struct usb_device *usb = interface_to_usbdev(intf);
 	struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
-
 	brcmf_dbg(USB, "Enter\n");
 
-	if (!brcmf_usb_fw_download(devinfo))
-		return brcmf_usb_resume(intf);
-
-	return -EIO;
+	return brcmf_fw_get_firmwares(&usb->dev, 0,
+				      brcmf_usb_get_fwname(devinfo), NULL,
+				      brcmf_usb_probe_phase2);
 }
 
 #define BRCMF_USB_VENDOR_ID_BROADCOM	0x0a5c
@@ -1507,16 +1420,6 @@ static struct usb_driver brcmf_usbdrvr = {
 	.disable_hub_initiated_lpm = 1,
 };
 
-static void brcmf_release_fw(struct list_head *q)
-{
-	struct brcmf_usb_image *fw_image, *next;
-
-	list_for_each_entry_safe(fw_image, next, q, list) {
-		vfree(fw_image->image);
-		list_del_init(&fw_image->list);
-	}
-}
-
 static int brcmf_usb_reset_device(struct device *dev, void *notused)
 {
 	/* device past is the usb interface so we
@@ -1535,12 +1438,10 @@ void brcmf_usb_exit(void)
 	ret = driver_for_each_device(drv, NULL, NULL,
 				     brcmf_usb_reset_device);
 	usb_deregister(&brcmf_usbdrvr);
-	brcmf_release_fw(&fw_image_list);
 }
 
 void brcmf_usb_register(void)
 {
 	brcmf_dbg(USB, "Enter\n");
-	INIT_LIST_HEAD(&fw_image_list);
 	usb_register(&brcmf_usbdrvr);
 }
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 92cb29a2003f..d8fa276e368b 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -341,8 +341,8 @@ static u8 brcmf_mw_to_qdbm(u16 mw)
 	return qdbm;
 }
 
-u16 chandef_to_chanspec(struct brcmu_d11inf *d11inf,
-			struct cfg80211_chan_def *ch)
+static u16 chandef_to_chanspec(struct brcmu_d11inf *d11inf,
+			       struct cfg80211_chan_def *ch)
 {
 	struct brcmu_chan ch_inf;
 	s32 primary_offset;
@@ -640,6 +640,9 @@ s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg,
 		if (err)
 			brcmf_err("Scan abort  failed\n");
 	}
+
+	brcmf_set_mpc(ifp, 1);
+
 	/*
 	 * e-scan can be initiated by scheduled scan
 	 * which takes precedence.
@@ -649,12 +652,10 @@ s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg,
 		cfg->sched_escan = false;
 		if (!aborted)
 			cfg80211_sched_scan_results(cfg_to_wiphy(cfg));
-		brcmf_set_mpc(ifp, 1);
 	} else if (scan_request) {
 		brcmf_dbg(SCAN, "ESCAN Completed scan: %s\n",
 			  aborted ? "Aborted" : "Done");
 		cfg80211_scan_done(scan_request, aborted);
-		brcmf_set_mpc(ifp, 1);
 	}
 	if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status))
 		brcmf_dbg(SCAN, "Scan complete, probably P2P scan\n");
@@ -3178,7 +3179,7 @@ brcmf_cfg80211_sched_scan_start(struct wiphy *wiphy,
 	}
 
 	if (!request->n_ssids || !request->n_match_sets) {
-		brcmf_err("Invalid sched scan req!! n_ssids:%d\n",
+		brcmf_dbg(SCAN, "Invalid sched scan req!! n_ssids:%d\n",
 			  request->n_ssids);
 		return -EINVAL;
 	}