diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/fw')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/fw/api/mac.h | 127 |
1 files changed, 118 insertions, 9 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h b/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h index 11f0bd283e49..9b7caf968346 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h @@ -413,10 +413,11 @@ enum iwl_he_pkt_ext_constellations { }; #define MAX_HE_SUPP_NSS 2 -#define MAX_HE_CHANNEL_BW_INDX 4 +#define MAX_CHANNEL_BW_INDX_API_D_VER_2 4 +#define MAX_CHANNEL_BW_INDX_API_D_VER_3 5 /** - * struct iwl_he_pkt_ext - QAM thresholds + * struct iwl_he_pkt_ext_v1 - QAM thresholds * The required PPE is set via HE Capabilities IE, per Nss x BW x MCS * The IE is organized in the following way: * Support for Nss x BW (or RU) matrix: @@ -435,9 +436,34 @@ enum iwl_he_pkt_ext_constellations { * Nss (0-siso, 1-mimo2) x BW (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz) x * (0-low_th, 1-high_th) */ -struct iwl_he_pkt_ext { - u8 pkt_ext_qam_th[MAX_HE_SUPP_NSS][MAX_HE_CHANNEL_BW_INDX][2]; -} __packed; /* PKT_EXT_DOT11AX_API_S */ +struct iwl_he_pkt_ext_v1 { + u8 pkt_ext_qam_th[MAX_HE_SUPP_NSS][MAX_CHANNEL_BW_INDX_API_D_VER_2][2]; +} __packed; /* PKT_EXT_DOT11AX_API_S_VER_1 */ + +/** + * struct iwl_he_pkt_ext_v2 - QAM thresholds + * The required PPE is set via HE Capabilities IE, per Nss x BW x MCS + * The IE is organized in the following way: + * Support for Nss x BW (or RU) matrix: + * (0=SISO, 1=MIMO2) x (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz) + * Each entry contains 2 QAM thresholds for 8us and 16us: + * 0=BPSK, 1=QPSK, 2=16QAM, 3=64QAM, 4=256QAM, 5=1024QAM, 6=RES, 7=NONE + * i.e. QAM_th1 < QAM_th2 such if TX uses QAM_tx: + * QAM_tx < QAM_th1 --> PPE=0us + * QAM_th1 <= QAM_tx < QAM_th2 --> PPE=8us + * QAM_th2 <= QAM_tx --> PPE=16us + * @pkt_ext_qam_th: QAM thresholds + * For each Nss/Bw define 2 QAM thrsholds (0..5) + * For rates below the low_th, no need for PPE + * For rates between low_th and high_th, need 8us PPE + * For rates equal or higher then the high_th, need 16us PPE + * Nss (0-siso, 1-mimo2) x + * BW (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz, 4-320MHz) x + * (0-low_th, 1-high_th) + */ +struct iwl_he_pkt_ext_v2 { + u8 pkt_ext_qam_th[MAX_HE_SUPP_NSS][MAX_CHANNEL_BW_INDX_API_D_VER_3][2]; +} __packed; /* PKT_EXT_DOT11AX_API_S_VER_2 */ /** * enum iwl_he_sta_ctxt_flags - HE STA context flags @@ -464,6 +490,11 @@ struct iwl_he_pkt_ext { * @STA_CTXT_HE_RU_2MHZ_BLOCK: indicates that 26-tone RU OFDMA transmission are * not allowed (as there are OBSS that might classify such transmissions as * radar pulses). + * @STA_CTXT_HE_NDP_FEEDBACK_ENABLED: mark support for NDP feedback and change + * of threshold + * @STA_CTXT_EHT_PUNCTURE_MASK_VALID: indicates the puncture_mask field is valid + * @STA_CTXT_EHT_LONG_PPE_ENABLED: indicates the PPE requirement should be + * extended to 20us for BW > 160Mhz or for MCS w/ 4096-QAM. */ enum iwl_he_sta_ctxt_flags { STA_CTXT_HE_REF_BSSID_VALID = BIT(4), @@ -477,6 +508,9 @@ enum iwl_he_sta_ctxt_flags { STA_CTXT_HE_MU_EDCA_CW = BIT(12), STA_CTXT_HE_NIC_NOT_ACK_ENABLED = BIT(13), STA_CTXT_HE_RU_2MHZ_BLOCK = BIT(14), + STA_CTXT_HE_NDP_FEEDBACK_ENABLED = BIT(15), + STA_CTXT_EHT_PUNCTURE_MASK_VALID = BIT(16), + STA_CTXT_EHT_LONG_PPE_ENABLED = BIT(17), }; /** @@ -551,7 +585,7 @@ struct iwl_he_sta_context_cmd_v1 { u8 frag_min_size; /* The below fields are set via PPE thresholds element */ - struct iwl_he_pkt_ext pkt_ext; + struct iwl_he_pkt_ext_v1 pkt_ext; /* The below fields are set via HE-Operation IE */ u8 bss_color; @@ -568,7 +602,7 @@ struct iwl_he_sta_context_cmd_v1 { } __packed; /* STA_CONTEXT_DOT11AX_API_S_VER_1 */ /** - * struct iwl_he_sta_context_cmd - configure FW to work with HE AP + * struct iwl_he_sta_context_cmd_v2 - configure FW to work with HE AP * @sta_id: STA id * @tid_limit: max num of TIDs in TX HE-SU multi-TID agg * 0 - bad value, 1 - multi-tid not supported, 2..8 - tid limit @@ -599,7 +633,7 @@ struct iwl_he_sta_context_cmd_v1 { * @bssid_count: actual number of VAPs in the MultiBSS Set * @reserved4: alignment */ -struct iwl_he_sta_context_cmd { +struct iwl_he_sta_context_cmd_v2 { u8 sta_id; u8 tid_limit; u8 reserved1; @@ -619,7 +653,7 @@ struct iwl_he_sta_context_cmd { u8 frag_min_size; /* The below fields are set via PPE thresholds element */ - struct iwl_he_pkt_ext pkt_ext; + struct iwl_he_pkt_ext_v1 pkt_ext; /* The below fields are set via HE-Operation IE */ u8 bss_color; @@ -643,6 +677,81 @@ struct iwl_he_sta_context_cmd { } __packed; /* STA_CONTEXT_DOT11AX_API_S_VER_2 */ /** + * struct iwl_he_sta_context_cmd_v3 - configure FW to work with HE AP + * @sta_id: STA id + * @tid_limit: max num of TIDs in TX HE-SU multi-TID agg + * 0 - bad value, 1 - multi-tid not supported, 2..8 - tid limit + * @reserved1: reserved byte for future use + * @reserved2: reserved byte for future use + * @flags: see %iwl_11ax_sta_ctxt_flags + * @ref_bssid_addr: reference BSSID used by the AP + * @reserved0: reserved 2 bytes for aligning the ref_bssid_addr field to 8 bytes + * @htc_flags: which features are supported in HTC + * @frag_flags: frag support in A-MSDU + * @frag_level: frag support level + * @frag_max_num: max num of "open" MSDUs in the receiver (in power of 2) + * @frag_min_size: min frag size (except last frag) + * @pkt_ext: optional, exists according to PPE-present bit in the HE-PHY capa + * @bss_color: 11ax AP ID that is used in the HE SIG-A to mark inter BSS frame + * @htc_trig_based_pkt_ext: default PE in 4us units + * @frame_time_rts_th: HE duration RTS threshold, in units of 32us + * @rand_alloc_ecwmin: random CWmin = 2**ECWmin-1 + * @rand_alloc_ecwmax: random CWmax = 2**ECWmax-1 + * @puncture_mask: puncture mask for EHT + * @trig_based_txf: MU EDCA Parameter set for the trigger based traffic queues + * @max_bssid_indicator: indicator of the max bssid supported on the associated + * bss + * @bssid_index: index of the associated VAP + * @ema_ap: AP supports enhanced Multi BSSID advertisement + * @profile_periodicity: number of Beacon periods that are needed to receive the + * complete VAPs info + * @bssid_count: actual number of VAPs in the MultiBSS Set + * @reserved4: alignment + */ +struct iwl_he_sta_context_cmd_v3 { + u8 sta_id; + u8 tid_limit; + u8 reserved1; + u8 reserved2; + __le32 flags; + + /* The below fields are set via Multiple BSSID IE */ + u8 ref_bssid_addr[6]; + __le16 reserved0; + + /* The below fields are set via HE-capabilities IE */ + __le32 htc_flags; + + u8 frag_flags; + u8 frag_level; + u8 frag_max_num; + u8 frag_min_size; + + /* The below fields are set via PPE thresholds element */ + struct iwl_he_pkt_ext_v2 pkt_ext; + + /* The below fields are set via HE-Operation IE */ + u8 bss_color; + u8 htc_trig_based_pkt_ext; + __le16 frame_time_rts_th; + + /* Random access parameter set (i.e. RAPS) */ + u8 rand_alloc_ecwmin; + u8 rand_alloc_ecwmax; + __le16 puncture_mask; + + /* The below fields are set via MU EDCA parameter set element */ + struct iwl_he_backoff_conf trig_based_txf[AC_NUM]; + + u8 max_bssid_indicator; + u8 bssid_index; + u8 ema_ap; + u8 profile_periodicity; + u8 bssid_count; + u8 reserved4[3]; +} __packed; /* STA_CONTEXT_DOT11AX_API_S_VER_2 */ + +/** * struct iwl_he_monitor_cmd - configure air sniffer for HE * @bssid: the BSSID to sniff for * @reserved1: reserved for dword alignment |