summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c')
-rw-r--r--drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c123
1 files changed, 89 insertions, 34 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c
index 3ee6767392b6..3014beef4873 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c
@@ -79,6 +79,7 @@
/* NVM offsets (in words) definitions */
enum wkp_nvm_offsets {
/* NVM HW-Section offset (in words) definitions */
+ SUBSYSTEM_ID = 0x0A,
HW_ADDR = 0x15,
/* NVM SW-Section offset (in words) definitions */
@@ -183,22 +184,26 @@ static struct ieee80211_rate iwl_cfg80211_rates[] = {
* @NVM_CHANNEL_INDOOR_ONLY: only indoor use is allowed
* @NVM_CHANNEL_GO_CONCURRENT: GO operation is allowed when connected to BSS
* on same channel on 2.4 or same UNII band on 5.2
- * @NVM_CHANNEL_WIDE: 20 MHz channel okay (?)
- * @NVM_CHANNEL_40MHZ: 40 MHz channel okay (?)
- * @NVM_CHANNEL_80MHZ: 80 MHz channel okay (?)
- * @NVM_CHANNEL_160MHZ: 160 MHz channel okay (?)
+ * @NVM_CHANNEL_UNIFORM: uniform spreading required
+ * @NVM_CHANNEL_20MHZ: 20 MHz channel okay
+ * @NVM_CHANNEL_40MHZ: 40 MHz channel okay
+ * @NVM_CHANNEL_80MHZ: 80 MHz channel okay
+ * @NVM_CHANNEL_160MHZ: 160 MHz channel okay
+ * @NVM_CHANNEL_DC_HIGH: DC HIGH required/allowed (?)
*/
enum iwl_nvm_channel_flags {
- NVM_CHANNEL_VALID = BIT(0),
- NVM_CHANNEL_IBSS = BIT(1),
- NVM_CHANNEL_ACTIVE = BIT(3),
- NVM_CHANNEL_RADAR = BIT(4),
- NVM_CHANNEL_INDOOR_ONLY = BIT(5),
- NVM_CHANNEL_GO_CONCURRENT = BIT(6),
- NVM_CHANNEL_WIDE = BIT(8),
- NVM_CHANNEL_40MHZ = BIT(9),
- NVM_CHANNEL_80MHZ = BIT(10),
- NVM_CHANNEL_160MHZ = BIT(11),
+ NVM_CHANNEL_VALID = BIT(0),
+ NVM_CHANNEL_IBSS = BIT(1),
+ NVM_CHANNEL_ACTIVE = BIT(3),
+ NVM_CHANNEL_RADAR = BIT(4),
+ NVM_CHANNEL_INDOOR_ONLY = BIT(5),
+ NVM_CHANNEL_GO_CONCURRENT = BIT(6),
+ NVM_CHANNEL_UNIFORM = BIT(7),
+ NVM_CHANNEL_20MHZ = BIT(8),
+ NVM_CHANNEL_40MHZ = BIT(9),
+ NVM_CHANNEL_80MHZ = BIT(10),
+ NVM_CHANNEL_160MHZ = BIT(11),
+ NVM_CHANNEL_DC_HIGH = BIT(12),
};
#define CHECK_AND_PRINT_I(x) \
@@ -254,13 +259,12 @@ static u32 iwl_get_channel_flags(u8 ch_num, int ch_idx, bool is_5ghz,
static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
struct iwl_nvm_data *data,
const __le16 * const nvm_ch_flags,
- bool lar_supported)
+ bool lar_supported, bool no_wide_in_5ghz)
{
int ch_idx;
int n_channels = 0;
struct ieee80211_channel *channel;
u16 ch_flags;
- bool is_5ghz;
int num_of_ch, num_2ghz_channels;
const u8 *nvm_chan;
@@ -275,12 +279,20 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
}
for (ch_idx = 0; ch_idx < num_of_ch; ch_idx++) {
+ bool is_5ghz = (ch_idx >= num_2ghz_channels);
+
ch_flags = __le16_to_cpup(nvm_ch_flags + ch_idx);
- if (ch_idx >= num_2ghz_channels &&
- !data->sku_cap_band_52GHz_enable)
+ if (is_5ghz && !data->sku_cap_band_52GHz_enable)
continue;
+ /* workaround to disable wide channels in 5GHz */
+ if (no_wide_in_5ghz && is_5ghz) {
+ ch_flags &= ~(NVM_CHANNEL_40MHZ |
+ NVM_CHANNEL_80MHZ |
+ NVM_CHANNEL_160MHZ);
+ }
+
if (ch_flags & NVM_CHANNEL_160MHZ)
data->vht160_supported = true;
@@ -303,8 +315,8 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
n_channels++;
channel->hw_value = nvm_chan[ch_idx];
- channel->band = (ch_idx < num_2ghz_channels) ?
- NL80211_BAND_2GHZ : NL80211_BAND_5GHZ;
+ channel->band = is_5ghz ?
+ NL80211_BAND_5GHZ : NL80211_BAND_2GHZ;
channel->center_freq =
ieee80211_channel_to_frequency(
channel->hw_value, channel->band);
@@ -316,7 +328,6 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
* is not used in mvm, and is used for backwards compatibility
*/
channel->max_power = IWL_DEFAULT_MAX_TX_POWER;
- is_5ghz = channel->band == NL80211_BAND_5GHZ;
/* don't put limitations in case we're using LAR */
if (!lar_supported)
@@ -327,7 +338,7 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
channel->flags = 0;
IWL_DEBUG_EEPROM(dev,
- "Ch. %d [%sGHz] flags 0x%x %s%s%s%s%s%s%s%s%s%s(%ddBm): Ad-Hoc %ssupported\n",
+ "Ch. %d [%sGHz] flags 0x%x %s%s%s%s%s%s%s%s%s%s%s%s(%ddBm): Ad-Hoc %ssupported\n",
channel->hw_value,
is_5ghz ? "5.2" : "2.4",
ch_flags,
@@ -337,10 +348,12 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
CHECK_AND_PRINT_I(RADAR),
CHECK_AND_PRINT_I(INDOOR_ONLY),
CHECK_AND_PRINT_I(GO_CONCURRENT),
- CHECK_AND_PRINT_I(WIDE),
+ CHECK_AND_PRINT_I(UNIFORM),
+ CHECK_AND_PRINT_I(20MHZ),
CHECK_AND_PRINT_I(40MHZ),
CHECK_AND_PRINT_I(80MHZ),
CHECK_AND_PRINT_I(160MHZ),
+ CHECK_AND_PRINT_I(DC_HIGH),
channel->max_power,
((ch_flags & NVM_CHANNEL_IBSS) &&
!(ch_flags & NVM_CHANNEL_RADAR))
@@ -432,14 +445,15 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg,
void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg,
struct iwl_nvm_data *data, const __le16 *nvm_ch_flags,
- u8 tx_chains, u8 rx_chains, bool lar_supported)
+ u8 tx_chains, u8 rx_chains, bool lar_supported,
+ bool no_wide_in_5ghz)
{
int n_channels;
int n_used = 0;
struct ieee80211_supported_band *sband;
n_channels = iwl_init_channel_map(dev, cfg, data, nvm_ch_flags,
- lar_supported);
+ lar_supported, no_wide_in_5ghz);
sband = &data->bands[NL80211_BAND_2GHZ];
sband->band = NL80211_BAND_2GHZ;
sband->bitrates = &iwl_cfg80211_rates[RATES_24_OFFS];
@@ -568,7 +582,7 @@ static void iwl_set_hw_address_family_8000(struct iwl_trans *trans,
const struct iwl_cfg *cfg,
struct iwl_nvm_data *data,
const __le16 *mac_override,
- const __le16 *nvm_hw)
+ const __be16 *nvm_hw)
{
const u8 *hw_addr;
@@ -615,7 +629,7 @@ static void iwl_set_hw_address_family_8000(struct iwl_trans *trans,
static int iwl_set_hw_address(struct iwl_trans *trans,
const struct iwl_cfg *cfg,
- struct iwl_nvm_data *data, const __le16 *nvm_hw,
+ struct iwl_nvm_data *data, const __be16 *nvm_hw,
const __le16 *mac_override)
{
if (cfg->mac_addr_from_csr) {
@@ -645,9 +659,41 @@ static int iwl_set_hw_address(struct iwl_trans *trans,
return 0;
}
+static bool
+iwl_nvm_no_wide_in_5ghz(struct device *dev, const struct iwl_cfg *cfg,
+ const __be16 *nvm_hw)
+{
+ /*
+ * Workaround a bug in Indonesia SKUs where the regulatory in
+ * some 7000-family OTPs erroneously allow wide channels in
+ * 5GHz. To check for Indonesia, we take the SKU value from
+ * bits 1-4 in the subsystem ID and check if it is either 5 or
+ * 9. In those cases, we need to force-disable wide channels
+ * in 5GHz otherwise the FW will throw a sysassert when we try
+ * to use them.
+ */
+ if (cfg->device_family == IWL_DEVICE_FAMILY_7000) {
+ /*
+ * Unlike the other sections in the NVM, the hw
+ * section uses big-endian.
+ */
+ u16 subsystem_id = be16_to_cpup(nvm_hw + SUBSYSTEM_ID);
+ u8 sku = (subsystem_id & 0x1e) >> 1;
+
+ if (sku == 5 || sku == 9) {
+ IWL_DEBUG_EEPROM(dev,
+ "disabling wide channels in 5GHz (0x%0x %d)\n",
+ subsystem_id, sku);
+ return true;
+ }
+ }
+
+ return false;
+}
+
struct iwl_nvm_data *
iwl_parse_nvm_data(struct iwl_trans *trans, const struct iwl_cfg *cfg,
- const __le16 *nvm_hw, const __le16 *nvm_sw,
+ const __be16 *nvm_hw, const __le16 *nvm_sw,
const __le16 *nvm_calib, const __le16 *regulatory,
const __le16 *mac_override, const __le16 *phy_sku,
u8 tx_chains, u8 rx_chains, bool lar_fw_supported)
@@ -655,6 +701,7 @@ iwl_parse_nvm_data(struct iwl_trans *trans, const struct iwl_cfg *cfg,
struct device *dev = trans->dev;
struct iwl_nvm_data *data;
bool lar_enabled;
+ bool no_wide_in_5ghz = iwl_nvm_no_wide_in_5ghz(dev, cfg, nvm_hw);
u32 sku, radio_cfg;
u16 lar_config;
const __le16 *ch_section;
@@ -725,7 +772,7 @@ iwl_parse_nvm_data(struct iwl_trans *trans, const struct iwl_cfg *cfg,
}
iwl_init_sbands(dev, cfg, data, ch_section, tx_chains, rx_chains,
- lar_fw_supported && lar_enabled);
+ lar_fw_supported && lar_enabled, no_wide_in_5ghz);
data->calib_version = 255;
return data;
@@ -868,19 +915,27 @@ iwl_parse_nvm_mcc_info(struct device *dev, const struct iwl_cfg *cfg,
prev_reg_rule_flags = reg_rule_flags;
IWL_DEBUG_DEV(dev, IWL_DL_LAR,
- "Ch. %d [%sGHz] %s%s%s%s%s%s%s%s%s(0x%02x) reg_flags 0x%x: %s\n",
+ "Ch. %d [%sGHz] %s%s%s%s%s%s%s%s%s%s%s%s(0x%02x)\n",
center_freq,
band == NL80211_BAND_5GHZ ? "5.2" : "2.4",
CHECK_AND_PRINT_I(VALID),
+ CHECK_AND_PRINT_I(IBSS),
CHECK_AND_PRINT_I(ACTIVE),
CHECK_AND_PRINT_I(RADAR),
- CHECK_AND_PRINT_I(WIDE),
+ CHECK_AND_PRINT_I(INDOOR_ONLY),
+ CHECK_AND_PRINT_I(GO_CONCURRENT),
+ CHECK_AND_PRINT_I(UNIFORM),
+ CHECK_AND_PRINT_I(20MHZ),
CHECK_AND_PRINT_I(40MHZ),
CHECK_AND_PRINT_I(80MHZ),
CHECK_AND_PRINT_I(160MHZ),
- CHECK_AND_PRINT_I(INDOOR_ONLY),
- CHECK_AND_PRINT_I(GO_CONCURRENT),
- ch_flags, reg_rule_flags,
+ CHECK_AND_PRINT_I(DC_HIGH),
+ ch_flags);
+ IWL_DEBUG_DEV(dev, IWL_DL_LAR,
+ "Ch. %d [%sGHz] reg_flags 0x%x: %s\n",
+ center_freq,
+ band == NL80211_BAND_5GHZ ? "5.2" : "2.4",
+ reg_rule_flags,
((ch_flags & NVM_CHANNEL_ACTIVE) &&
!(ch_flags & NVM_CHANNEL_RADAR))
? "Ad-Hoc" : "");