diff options
Diffstat (limited to 'drivers/net/wireless/intersil/orinoco/orinoco_pci.c')
| -rw-r--r-- | drivers/net/wireless/intersil/orinoco/orinoco_pci.c | 257 |
1 files changed, 0 insertions, 257 deletions
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_pci.c b/drivers/net/wireless/intersil/orinoco/orinoco_pci.c deleted file mode 100644 index 7e3a6dd60c15..000000000000 --- a/drivers/net/wireless/intersil/orinoco/orinoco_pci.c +++ /dev/null @@ -1,257 +0,0 @@ -/* orinoco_pci.c - * - * Driver for Prism 2.5/3 devices that have a direct PCI interface - * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge). - * The card contains only one PCI region, which contains all the usual - * hermes registers, as well as the COR register. - * - * Current maintainers are: - * Pavel Roskin <proski AT gnu.org> - * and David Gibson <hermes AT gibson.dropbear.id.au> - * - * Some of this code is borrowed from orinoco_plx.c - * Copyright (C) 2001 Daniel Barlow <dan AT telent.net> - * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing - * has been copied from it. linux-wlan-ng-0.1.10 is originally : - * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. - * This file originally written by: - * Copyright (C) 2001 Jean Tourrilhes <jt AT hpl.hp.com> - * And is now maintained by: - * (C) Copyright David Gibson, IBM Corp. 2002-2003. - * - * The contents of this file are subject to the Mozilla Public License - * Version 1.1 (the "License"); you may not use this file except in - * compliance with the License. You may obtain a copy of the License - * at http://www.mozilla.org/MPL/ - * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and - * limitations under the License. - * - * Alternatively, the contents of this file may be used under the - * terms of the GNU General Public License version 2 (the "GPL"), in - * which case the provisions of the GPL are applicable instead of the - * above. If you wish to allow the use of your version of this file - * only under the terms of the GPL and not to allow others to use your - * version of this file under the MPL, indicate your decision by - * deleting the provisions above and replace them with the notice and - * other provisions required by the GPL. If you do not delete the - * provisions above, a recipient may use your version of this file - * under either the MPL or the GPL. - */ - -#define DRIVER_NAME "orinoco_pci" -#define PFX DRIVER_NAME ": " - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/pci.h> - -#include "orinoco.h" -#include "orinoco_pci.h" - -/* Offset of the COR register of the PCI card */ -#define HERMES_PCI_COR (0x26) - -/* Bitmask to reset the card */ -#define HERMES_PCI_COR_MASK (0x0080) - -/* Magic timeouts for doing the reset. - * Those times are straight from wlan-ng, and it is claimed that they - * are necessary. Alan will kill me. Take your time and grab a coffee. */ -#define HERMES_PCI_COR_ONT (250) /* ms */ -#define HERMES_PCI_COR_OFFT (500) /* ms */ -#define HERMES_PCI_COR_BUSYT (500) /* ms */ - -/* - * Do a soft reset of the card using the Configuration Option Register - * We need this to get going... - * This is the part of the code that is strongly inspired from wlan-ng - * - * Note : This code is done with irq enabled. This mean that many - * interrupts will occur while we are there. This is why we use the - * jiffies to regulate time instead of a straight mdelay(). Usually we - * need only around 245 iteration of the loop to do 250 ms delay. - * - * Note bis : Don't try to access HERMES_CMD during the reset phase. - * It just won't work ! - */ -static int orinoco_pci_cor_reset(struct orinoco_private *priv) -{ - struct hermes *hw = &priv->hw; - unsigned long timeout; - u16 reg; - - /* Assert the reset until the card notices */ - hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK); - mdelay(HERMES_PCI_COR_ONT); - - /* Give time for the card to recover from this hard effort */ - hermes_write_regn(hw, PCI_COR, 0x0000); - mdelay(HERMES_PCI_COR_OFFT); - - /* The card is ready when it's no longer busy */ - timeout = jiffies + msecs_to_jiffies(HERMES_PCI_COR_BUSYT); - reg = hermes_read_regn(hw, CMD); - while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) { - mdelay(1); - reg = hermes_read_regn(hw, CMD); - } - - /* Still busy? */ - if (reg & HERMES_CMD_BUSY) { - printk(KERN_ERR PFX "Busy timeout\n"); - return -ETIMEDOUT; - } - - return 0; -} - -static int orinoco_pci_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - int err; - struct orinoco_private *priv; - struct orinoco_pci_card *card; - void __iomem *hermes_io; - - err = pci_enable_device(pdev); - if (err) { - printk(KERN_ERR PFX "Cannot enable PCI device\n"); - return err; - } - - err = pci_request_regions(pdev, DRIVER_NAME); - if (err) { - printk(KERN_ERR PFX "Cannot obtain PCI resources\n"); - goto fail_resources; - } - - hermes_io = pci_iomap(pdev, 0, 0); - if (!hermes_io) { - printk(KERN_ERR PFX "Cannot remap chipset registers\n"); - err = -EIO; - goto fail_map_hermes; - } - - /* Allocate network device */ - priv = alloc_orinocodev(sizeof(*card), &pdev->dev, - orinoco_pci_cor_reset, NULL); - if (!priv) { - printk(KERN_ERR PFX "Cannot allocate network device\n"); - err = -ENOMEM; - goto fail_alloc; - } - - card = priv->card; - - hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING); - - err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED, - DRIVER_NAME, priv); - if (err) { - printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq); - err = -EBUSY; - goto fail_irq; - } - - err = orinoco_pci_cor_reset(priv); - if (err) { - printk(KERN_ERR PFX "Initial reset failed\n"); - goto fail; - } - - err = orinoco_init(priv); - if (err) { - printk(KERN_ERR PFX "orinoco_init() failed\n"); - goto fail; - } - - err = orinoco_if_add(priv, 0, 0, NULL); - if (err) { - printk(KERN_ERR PFX "orinoco_if_add() failed\n"); - goto fail_wiphy; - } - - pci_set_drvdata(pdev, priv); - - return 0; - - fail_wiphy: - wiphy_unregister(priv_to_wiphy(priv)); - fail: - free_irq(pdev->irq, priv); - - fail_irq: - free_orinocodev(priv); - - fail_alloc: - pci_iounmap(pdev, hermes_io); - - fail_map_hermes: - pci_release_regions(pdev); - - fail_resources: - pci_disable_device(pdev); - - return err; -} - -static void orinoco_pci_remove_one(struct pci_dev *pdev) -{ - struct orinoco_private *priv = pci_get_drvdata(pdev); - - orinoco_if_del(priv); - wiphy_unregister(priv_to_wiphy(priv)); - free_irq(pdev->irq, priv); - free_orinocodev(priv); - pci_iounmap(pdev, priv->hw.iobase); - pci_release_regions(pdev); - pci_disable_device(pdev); -} - -static const struct pci_device_id orinoco_pci_id_table[] = { - /* Intersil Prism 3 */ - {0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,}, - /* Intersil Prism 2.5 */ - {0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,}, - /* Samsung MagicLAN SWL-2210P */ - {0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,}, - {0,}, -}; - -MODULE_DEVICE_TABLE(pci, orinoco_pci_id_table); - -static struct pci_driver orinoco_pci_driver = { - .name = DRIVER_NAME, - .id_table = orinoco_pci_id_table, - .probe = orinoco_pci_init_one, - .remove = orinoco_pci_remove_one, - .driver.pm = &orinoco_pci_pm_ops, -}; - -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Pavel Roskin <proski@gnu.org>," - " David Gibson <hermes@gibson.dropbear.id.au> &" - " Jean Tourrilhes <jt@hpl.hp.com>)"; -MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> &" - " David Gibson <hermes@gibson.dropbear.id.au>"); -MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface"); -MODULE_LICENSE("Dual MPL/GPL"); - -static int __init orinoco_pci_init(void) -{ - printk(KERN_DEBUG "%s\n", version); - return pci_register_driver(&orinoco_pci_driver); -} - -static void __exit orinoco_pci_exit(void) -{ - pci_unregister_driver(&orinoco_pci_driver); -} - -module_init(orinoco_pci_init); -module_exit(orinoco_pci_exit); |