diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/dvm')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/dvm/agn.h | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/dvm/dev.h | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/dvm/devices.c | 13 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/dvm/lib.c | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/dvm/mac80211.c | 55 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/dvm/main.c | 29 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/dvm/scan.c | 47 |
7 files changed, 78 insertions, 72 deletions
diff --git a/drivers/net/wireless/iwlwifi/dvm/agn.h b/drivers/net/wireless/iwlwifi/dvm/agn.h index 6d102413dd94..9bb16bdf6d26 100644 --- a/drivers/net/wireless/iwlwifi/dvm/agn.h +++ b/drivers/net/wireless/iwlwifi/dvm/agn.h @@ -269,7 +269,7 @@ void iwl_scan_offchannel_skb_status(struct iwl_priv *priv); #define IWL_ACTIVE_QUIET_TIME cpu_to_le16(10) /* msec */ #define IWL_PLCP_QUIET_THRESH cpu_to_le16(1) /* packets */ -#define IWL_SCAN_CHECK_WATCHDOG (HZ * 7) +#define IWL_SCAN_CHECK_WATCHDOG (HZ * 15) /* bt coex */ diff --git a/drivers/net/wireless/iwlwifi/dvm/dev.h b/drivers/net/wireless/iwlwifi/dvm/dev.h index 4620b657948a..54cf085ddc89 100644 --- a/drivers/net/wireless/iwlwifi/dvm/dev.h +++ b/drivers/net/wireless/iwlwifi/dvm/dev.h @@ -568,7 +568,6 @@ enum iwl_scan_type { * * @tx_chains_num: Number of TX chains * @rx_chains_num: Number of RX chains - * @sku: sku read from EEPROM * @ct_kill_threshold: temperature threshold - in hw dependent unit * @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit * relevant for 1000, 6000 and up @@ -579,7 +578,6 @@ struct iwl_hw_params { u8 tx_chains_num; u8 rx_chains_num; bool use_rts_for_aggregation; - u16 sku; u32 ct_kill_threshold; u32 ct_kill_exit_threshold; diff --git a/drivers/net/wireless/iwlwifi/dvm/devices.c b/drivers/net/wireless/iwlwifi/dvm/devices.c index 0521a6be09d2..349c205d5f62 100644 --- a/drivers/net/wireless/iwlwifi/dvm/devices.c +++ b/drivers/net/wireless/iwlwifi/dvm/devices.c @@ -250,17 +250,6 @@ struct iwl_lib_ops iwl2030_lib = { */ /* NIC configuration for 5000 series */ -static void iwl5000_nic_config(struct iwl_priv *priv) -{ - /* W/A : NIC is stuck in a reset state after Early PCIe power off - * (PCIe power is lost before PERST# is asserted), - * causing ME FW to lose ownership and not being able to obtain it back. - */ - iwl_set_bits_mask_prph(priv->trans, APMG_PS_CTRL_REG, - APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS, - ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS); -} - static const struct iwl_sensitivity_ranges iwl5000_sensitivity = { .min_nrg_cck = 100, .auto_corr_min_ofdm = 90, @@ -433,14 +422,12 @@ static int iwl5000_hw_channel_switch(struct iwl_priv *priv, struct iwl_lib_ops iwl5000_lib = { .set_hw_params = iwl5000_hw_set_hw_params, .set_channel_switch = iwl5000_hw_channel_switch, - .nic_config = iwl5000_nic_config, .temperature = iwlagn_temperature, }; struct iwl_lib_ops iwl5150_lib = { .set_hw_params = iwl5150_hw_set_hw_params, .set_channel_switch = iwl5000_hw_channel_switch, - .nic_config = iwl5000_nic_config, .temperature = iwl5150_temperature, }; diff --git a/drivers/net/wireless/iwlwifi/dvm/lib.c b/drivers/net/wireless/iwlwifi/dvm/lib.c index 76f259283c3a..207ae91a83aa 100644 --- a/drivers/net/wireless/iwlwifi/dvm/lib.c +++ b/drivers/net/wireless/iwlwifi/dvm/lib.c @@ -160,7 +160,7 @@ int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control) IWL_PAN_SCD_BK_MSK | IWL_PAN_SCD_MGMT_MSK | IWL_PAN_SCD_MULTICAST_MSK; - if (priv->hw_params.sku & EEPROM_SKU_CAP_11N_ENABLE) + if (priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE) flush_cmd.fifo_control |= IWL_AGG_TX_QUEUE_MSK; IWL_DEBUG_INFO(priv, "fifo queue control: 0X%x\n", diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 2f10346c6ba1..a5f7bce96325 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -164,7 +164,7 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF; */ - if (priv->hw_params.sku & EEPROM_SKU_CAP_11N_ENABLE) + if (priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE) hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | IEEE80211_HW_SUPPORTS_STATIC_SMPS; @@ -649,7 +649,7 @@ static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw, IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n", sta->addr, tid); - if (!(priv->hw_params.sku & EEPROM_SKU_CAP_11N_ENABLE)) + if (!(priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE)) return -EACCES; IWL_DEBUG_MAC80211(priv, "enter\n"); @@ -1048,8 +1048,18 @@ static int iwlagn_mac_remain_on_channel(struct ieee80211_hw *hw, mutex_lock(&priv->mutex); if (test_bit(STATUS_SCAN_HW, &priv->status)) { - err = -EBUSY; - goto out; + /* mac80211 should not scan while ROC or ROC while scanning */ + if (WARN_ON_ONCE(priv->scan_type != IWL_SCAN_RADIO_RESET)) { + err = -EBUSY; + goto out; + } + + iwl_scan_cancel_timeout(priv, 100); + + if (test_bit(STATUS_SCAN_HW, &priv->status)) { + err = -EBUSY; + goto out; + } } priv->hw_roc_channel = channel; @@ -1413,13 +1423,11 @@ static void iwlagn_mac_remove_interface(struct ieee80211_hw *hw, } static int iwlagn_mac_change_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - enum nl80211_iftype newtype, bool newp2p) + struct ieee80211_vif *vif, + enum nl80211_iftype newtype, bool newp2p) { struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); - struct iwl_rxon_context *bss_ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct iwl_rxon_context *tmp; + struct iwl_rxon_context *ctx, *tmp; enum nl80211_iftype newviftype = newtype; u32 interface_modes; int err; @@ -1430,6 +1438,18 @@ static int iwlagn_mac_change_interface(struct ieee80211_hw *hw, mutex_lock(&priv->mutex); + ctx = iwl_rxon_ctx_from_vif(vif); + + /* + * To simplify this code, only support changes on the + * BSS context. The PAN context is usually reassigned + * by creating/removing P2P interfaces anyway. + */ + if (ctx->ctxid != IWL_RXON_CTX_BSS) { + err = -EBUSY; + goto out; + } + if (!ctx->vif || !iwl_is_ready_rf(priv)) { /* * Huh? But wait ... this can maybe happen when @@ -1439,32 +1459,19 @@ static int iwlagn_mac_change_interface(struct ieee80211_hw *hw, goto out; } + /* Check if the switch is supported in the same context */ interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes; - if (!(interface_modes & BIT(newtype))) { err = -EBUSY; goto out; } - /* - * Refuse a change that should be done by moving from the PAN - * context to the BSS context instead, if the BSS context is - * available and can support the new interface type. - */ - if (ctx->ctxid == IWL_RXON_CTX_PAN && !bss_ctx->vif && - (bss_ctx->interface_modes & BIT(newtype) || - bss_ctx->exclusive_interface_modes & BIT(newtype))) { - BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); - err = -EBUSY; - goto out; - } - if (ctx->exclusive_interface_modes & BIT(newtype)) { for_each_context(priv, tmp) { if (ctx == tmp) continue; - if (!tmp->vif) + if (!tmp->is_active) continue; /* diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c index e620af3d592d..abfd7916bde6 100644 --- a/drivers/net/wireless/iwlwifi/dvm/main.c +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -51,11 +51,13 @@ #include "iwl-op-mode.h" #include "iwl-drv.h" #include "iwl-modparams.h" +#include "iwl-prph.h" #include "dev.h" #include "calib.h" #include "agn.h" + /****************************************************************************** * * module boiler plate @@ -1185,9 +1187,6 @@ static void iwl_set_hw_params(struct iwl_priv *priv) priv->hw_params.use_rts_for_aggregation = priv->cfg->ht_params->use_rts_for_aggregation; - if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_ALL) - priv->hw_params.sku &= ~EEPROM_SKU_CAP_11N_ENABLE; - /* Device-specific setup */ priv->lib->set_hw_params(priv); } @@ -1232,20 +1231,20 @@ static int iwl_eeprom_init_hw_params(struct iwl_priv *priv) { u16 radio_cfg; - priv->hw_params.sku = priv->eeprom_data->sku; + priv->eeprom_data->sku = priv->eeprom_data->sku; - if (priv->hw_params.sku & EEPROM_SKU_CAP_11N_ENABLE && + if (priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE && !priv->cfg->ht_params) { IWL_ERR(priv, "Invalid 11n configuration\n"); return -EINVAL; } - if (!priv->hw_params.sku) { + if (!priv->eeprom_data->sku) { IWL_ERR(priv, "Invalid device sku\n"); return -EINVAL; } - IWL_INFO(priv, "Device SKU: 0x%X\n", priv->hw_params.sku); + IWL_INFO(priv, "Device SKU: 0x%X\n", priv->eeprom_data->sku); radio_cfg = priv->eeprom_data->radio_cfg; @@ -1352,6 +1351,9 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans, trans_cfg.queue_watchdog_timeout = IWL_WATCHDOG_DISABLED; trans_cfg.command_names = iwl_dvm_cmd_strings; + WARN_ON(sizeof(priv->transport_queue_stop) * BITS_PER_BYTE < + priv->cfg->base_params->num_of_queues); + ucode_flags = fw->ucode_capa.flags; #ifndef CONFIG_IWLWIFI_P2P @@ -1448,7 +1450,7 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans, ************************/ iwl_set_hw_params(priv); - if (!(priv->hw_params.sku & EEPROM_SKU_CAP_IPAN_ENABLE)) { + if (!(priv->eeprom_data->sku & EEPROM_SKU_CAP_IPAN_ENABLE)) { IWL_DEBUG_INFO(priv, "Your EEPROM disabled PAN"); ucode_flags &= ~IWL_UCODE_TLV_FLAGS_PAN; /* @@ -2073,7 +2075,16 @@ static void iwl_nic_config(struct iwl_op_mode *op_mode) CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); - priv->lib->nic_config(priv); + /* W/A : NIC is stuck in a reset state after Early PCIe power off + * (PCIe power is lost before PERST# is asserted), + * causing ME FW to lose ownership and not being able to obtain it back. + */ + iwl_set_bits_mask_prph(priv->trans, APMG_PS_CTRL_REG, + APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS, + ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS); + + if (priv->lib->nic_config) + priv->lib->nic_config(priv); } static void iwl_wimax_active(struct iwl_op_mode *op_mode) diff --git a/drivers/net/wireless/iwlwifi/dvm/scan.c b/drivers/net/wireless/iwlwifi/dvm/scan.c index 2f271c96ed39..6633074258c7 100644 --- a/drivers/net/wireless/iwlwifi/dvm/scan.c +++ b/drivers/net/wireless/iwlwifi/dvm/scan.c @@ -51,6 +51,9 @@ #define IWL_CHANNEL_TUNE_TIME 5 #define MAX_SCAN_CHANNEL 50 +/* For reset radio, need minimal dwell time only */ +#define IWL_RADIO_RESET_DWELL_TIME 5 + static int iwl_send_scan_abort(struct iwl_priv *priv) { int ret; @@ -469,45 +472,39 @@ static u8 iwl_get_single_channel_number(struct iwl_priv *priv, return 0; } -static int iwl_get_single_channel_for_scan(struct iwl_priv *priv, - struct ieee80211_vif *vif, - enum ieee80211_band band, - struct iwl_scan_channel *scan_ch) +static int iwl_get_channel_for_reset_scan(struct iwl_priv *priv, + struct ieee80211_vif *vif, + enum ieee80211_band band, + struct iwl_scan_channel *scan_ch) { const struct ieee80211_supported_band *sband; - u16 passive_dwell = 0; - u16 active_dwell = 0; - int added = 0; - u16 channel = 0; + u16 channel; sband = iwl_get_hw_mode(priv, band); if (!sband) { IWL_ERR(priv, "invalid band\n"); - return added; + return 0; } - active_dwell = iwl_get_active_dwell_time(priv, band, 0); - passive_dwell = iwl_get_passive_dwell_time(priv, band); - - if (passive_dwell <= active_dwell) - passive_dwell = active_dwell + 1; - channel = iwl_get_single_channel_number(priv, band); if (channel) { scan_ch->channel = cpu_to_le16(channel); scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; - scan_ch->active_dwell = cpu_to_le16(active_dwell); - scan_ch->passive_dwell = cpu_to_le16(passive_dwell); + scan_ch->active_dwell = + cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME); + scan_ch->passive_dwell = + cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME); /* Set txpower levels to defaults */ scan_ch->dsp_atten = 110; if (band == IEEE80211_BAND_5GHZ) scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; else scan_ch->tx_gain = ((1 << 5) | (5 << 3)); - added++; - } else - IWL_ERR(priv, "no valid channel found\n"); - return added; + return 1; + } + + IWL_ERR(priv, "no valid channel found\n"); + return 0; } static int iwl_get_channels_for_scan(struct iwl_priv *priv, @@ -723,6 +720,12 @@ static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) switch (priv->scan_type) { case IWL_SCAN_RADIO_RESET: IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n"); + /* + * Override quiet time as firmware checks that active + * dwell is >= quiet; since we use passive scan it'll + * not actually be used. + */ + scan->quiet_time = cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME); break; case IWL_SCAN_NORMAL: if (priv->scan_request->n_ssids) { @@ -896,7 +899,7 @@ static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) switch (priv->scan_type) { case IWL_SCAN_RADIO_RESET: scan->channel_count = - iwl_get_single_channel_for_scan(priv, vif, band, + iwl_get_channel_for_reset_scan(priv, vif, band, (void *)&scan->data[cmd_len]); break; case IWL_SCAN_NORMAL: |