summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-prph.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-prph.h')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-prph.h229
1 files changed, 229 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
new file mode 100644
index 000000000000..0df41148eadc
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -0,0 +1,229 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU Geeral Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+
+#ifndef __iwl_prph_h__
+#define __iwl_prph_h__
+
+
+#define PRPH_BASE (0x00000)
+#define PRPH_END (0xFFFFF)
+
+/* APMG (power management) constants */
+#define APMG_BASE (PRPH_BASE + 0x3000)
+#define APMG_CLK_CTRL_REG (APMG_BASE + 0x0000)
+#define APMG_CLK_EN_REG (APMG_BASE + 0x0004)
+#define APMG_CLK_DIS_REG (APMG_BASE + 0x0008)
+#define APMG_PS_CTRL_REG (APMG_BASE + 0x000c)
+#define APMG_PCIDEV_STT_REG (APMG_BASE + 0x0010)
+#define APMG_RFKILL_REG (APMG_BASE + 0x0014)
+#define APMG_RTC_INT_STT_REG (APMG_BASE + 0x001c)
+#define APMG_RTC_INT_MSK_REG (APMG_BASE + 0x0020)
+
+#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200)
+#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800)
+
+#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000)
+
+#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)
+
+#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000)
+#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000)
+#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x01000000)
+
+
+/**
+ * BSM (Bootstrap State Machine)
+ *
+ * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
+ * in special SRAM that does not power down when the embedded control
+ * processor is sleeping (e.g. for periodic power-saving shutdowns of radio).
+ *
+ * When powering back up after sleeps (or during initial uCode load), the BSM
+ * internally loads the short bootstrap program from the special SRAM into the
+ * embedded processor's instruction SRAM, and starts the processor so it runs
+ * the bootstrap program.
+ *
+ * This bootstrap program loads (via PCI busmaster DMA) instructions and data
+ * images for a uCode program from host DRAM locations. The host driver
+ * indicates DRAM locations and sizes for instruction and data images via the
+ * four BSM_DRAM_* registers. Once the bootstrap program loads the new program,
+ * the new program starts automatically.
+ *
+ * The uCode used for open-source drivers includes two programs:
+ *
+ * 1) Initialization -- performs hardware calibration and sets up some
+ * internal data, then notifies host via "initialize alive" notification
+ * (struct iwl_init_alive_resp) that it has completed all of its work.
+ * After signal from host, it then loads and starts the runtime program.
+ * The initialization program must be used when initially setting up the
+ * NIC after loading the driver.
+ *
+ * 2) Runtime/Protocol -- performs all normal runtime operations. This
+ * notifies host via "alive" notification (struct iwl_alive_resp) that it
+ * is ready to be used.
+ *
+ * When initializing the NIC, the host driver does the following procedure:
+ *
+ * 1) Load bootstrap program (instructions only, no data image for bootstrap)
+ * into bootstrap memory. Use dword writes starting at BSM_SRAM_LOWER_BOUND
+ *
+ * 2) Point (via BSM_DRAM_*) to the "initialize" uCode data and instruction
+ * images in host DRAM.
+ *
+ * 3) Set up BSM to copy from BSM SRAM into uCode instruction SRAM when asked:
+ * BSM_WR_MEM_SRC_REG = 0
+ * BSM_WR_MEM_DST_REG = RTC_INST_LOWER_BOUND
+ * BSM_WR_MEM_DWCOUNT_REG = # dwords in bootstrap instruction image
+ *
+ * 4) Load bootstrap into instruction SRAM:
+ * BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START
+ *
+ * 5) Wait for load completion:
+ * Poll BSM_WR_CTRL_REG for BSM_WR_CTRL_REG_BIT_START = 0
+ *
+ * 6) Enable future boot loads whenever NIC's power management triggers it:
+ * BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START_EN
+ *
+ * 7) Start the NIC by removing all reset bits:
+ * CSR_RESET = 0
+ *
+ * The bootstrap uCode (already in instruction SRAM) loads initialization
+ * uCode. Initialization uCode performs data initialization, sends
+ * "initialize alive" notification to host, and waits for a signal from
+ * host to load runtime code.
+ *
+ * 4) Point (via BSM_DRAM_*) to the "runtime" uCode data and instruction
+ * images in host DRAM. The last register loaded must be the instruction
+ * bytecount register ("1" in MSbit tells initialization uCode to load
+ * the runtime uCode):
+ * BSM_DRAM_INST_BYTECOUNT_REG = bytecount | BSM_DRAM_INST_LOAD
+ *
+ * 5) Wait for "alive" notification, then issue normal runtime commands.
+ *
+ * Data caching during power-downs:
+ *
+ * Just before the embedded controller powers down (e.g for automatic
+ * power-saving modes, or for RFKILL), uCode stores (via PCI busmaster DMA)
+ * a current snapshot of the embedded processor's data SRAM into host DRAM.
+ * This caches the data while the embedded processor's memory is powered down.
+ * Location and size are controlled by BSM_DRAM_DATA_* registers.
+ *
+ * NOTE: Instruction SRAM does not need to be saved, since that doesn't
+ * change during operation; the original image (from uCode distribution
+ * file) can be used for reload.
+ *
+ * When powering back up, the BSM loads the bootstrap program. Bootstrap looks
+ * at the BSM_DRAM_* registers, which now point to the runtime instruction
+ * image and the cached (modified) runtime data (*not* the initialization
+ * uCode). Bootstrap reloads these runtime images into SRAM, and restarts the
+ * uCode from where it left off before the power-down.
+ *
+ * NOTE: Initialization uCode does *not* run as part of the save/restore
+ * procedure.
+ *
+ * This save/restore method is mostly for autonomous power management during
+ * normal operation (result of POWER_TABLE_CMD). Platform suspend/resume and
+ * RFKILL should use complete restarts (with total re-initialization) of uCode,
+ * allowing total shutdown (including BSM memory).
+ *
+ * Note that, during normal operation, the host DRAM that held the initial
+ * startup data for the runtime code is now being used as a backup data cache
+ * for modified data! If you need to completely re-initialize the NIC, make
+ * sure that you use the runtime data image from the uCode distribution file,
+ * not the modified/saved runtime data. You may want to store a separate
+ * "clean" runtime data image in DRAM to avoid disk reads of distribution file.
+ */
+
+/* BSM bit fields */
+#define BSM_WR_CTRL_REG_BIT_START (0x80000000) /* start boot load now */
+#define BSM_WR_CTRL_REG_BIT_START_EN (0x40000000) /* enable boot after pwrup*/
+#define BSM_DRAM_INST_LOAD (0x80000000) /* start program load now */
+
+/* BSM addresses */
+#define BSM_BASE (PRPH_BASE + 0x3400)
+#define BSM_END (PRPH_BASE + 0x3800)
+
+#define BSM_WR_CTRL_REG (BSM_BASE + 0x000) /* ctl and status */
+#define BSM_WR_MEM_SRC_REG (BSM_BASE + 0x004) /* source in BSM mem */
+#define BSM_WR_MEM_DST_REG (BSM_BASE + 0x008) /* dest in SRAM mem */
+#define BSM_WR_DWCOUNT_REG (BSM_BASE + 0x00C) /* bytes */
+#define BSM_WR_STATUS_REG (BSM_BASE + 0x010) /* bit 0: 1 == done */
+
+/*
+ * Pointers and size regs for bootstrap load and data SRAM save/restore.
+ * NOTE: 3945 pointers use bits 31:0 of DRAM address.
+ * 4965 pointers use bits 35:4 of DRAM address.
+ */
+#define BSM_DRAM_INST_PTR_REG (BSM_BASE + 0x090)
+#define BSM_DRAM_INST_BYTECOUNT_REG (BSM_BASE + 0x094)
+#define BSM_DRAM_DATA_PTR_REG (BSM_BASE + 0x098)
+#define BSM_DRAM_DATA_BYTECOUNT_REG (BSM_BASE + 0x09C)
+
+/*
+ * BSM special memory, stays powered on during power-save sleeps.
+ * Read/write, address range from LOWER_BOUND to (LOWER_BOUND + SIZE -1)
+ */
+#define BSM_SRAM_LOWER_BOUND (PRPH_BASE + 0x3800)
+#define BSM_SRAM_SIZE (1024) /* bytes */
+
+
+#endif /* __iwl_prph_h__ */