summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ralink/rt2x00/rt2500usb.c')
-rw-r--r--drivers/net/wireless/ralink/rt2x00/rt2500usb.c2001
1 files changed, 2001 insertions, 0 deletions
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
new file mode 100644
index 000000000000..b50d873145d5
--- /dev/null
+++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c
@@ -0,0 +1,2001 @@
+/*
+ Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ Module: rt2500usb
+ Abstract: rt2500usb device specific routines.
+ Supported chipsets: RT2570.
+ */
+
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include "rt2x00.h"
+#include "rt2x00usb.h"
+#include "rt2500usb.h"
+
+/*
+ * Allow hardware encryption to be disabled.
+ */
+static bool modparam_nohwcrypt;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+/*
+ * Register access.
+ * All access to the CSR registers will go through the methods
+ * rt2500usb_register_read and rt2500usb_register_write.
+ * BBP and RF register require indirect register access,
+ * and use the CSR registers BBPCSR and RFCSR to achieve this.
+ * These indirect registers work with busy bits,
+ * and we will try maximal REGISTER_USB_BUSY_COUNT times to access
+ * the register while taking a REGISTER_BUSY_DELAY us delay
+ * between each attampt. When the busy bit is still set at that time,
+ * the access attempt is considered to have failed,
+ * and we will print an error.
+ * If the csr_mutex is already held then the _lock variants must
+ * be used instead.
+ */
+static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u16 *value)
+{
+ __le16 reg;
+ rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
+ USB_VENDOR_REQUEST_IN, offset,
+ &reg, sizeof(reg));
+ *value = le16_to_cpu(reg);
+}
+
+static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u16 *value)
+{
+ __le16 reg;
+ rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
+ USB_VENDOR_REQUEST_IN, offset,
+ &reg, sizeof(reg), REGISTER_TIMEOUT);
+ *value = le16_to_cpu(reg);
+}
+
+static inline void rt2500usb_register_multiread(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ void *value, const u16 length)
+{
+ rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
+ USB_VENDOR_REQUEST_IN, offset,
+ value, length);
+}
+
+static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u16 value)
+{
+ __le16 reg = cpu_to_le16(value);
+ rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT, offset,
+ &reg, sizeof(reg));
+}
+
+static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u16 value)
+{
+ __le16 reg = cpu_to_le16(value);
+ rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT, offset,
+ &reg, sizeof(reg), REGISTER_TIMEOUT);
+}
+
+static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ void *value, const u16 length)
+{
+ rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT, offset,
+ value, length);
+}
+
+static int rt2500usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ struct rt2x00_field16 field,
+ u16 *reg)
+{
+ unsigned int i;
+
+ for (i = 0; i < REGISTER_USB_BUSY_COUNT; i++) {
+ rt2500usb_register_read_lock(rt2x00dev, offset, reg);
+ if (!rt2x00_get_field16(*reg, field))
+ return 1;
+ udelay(REGISTER_BUSY_DELAY);
+ }
+
+ rt2x00_err(rt2x00dev, "Indirect register access failed: offset=0x%.08x, value=0x%.08x\n",
+ offset, *reg);
+ *reg = ~0;
+
+ return 0;
+}
+
+#define WAIT_FOR_BBP(__dev, __reg) \
+ rt2500usb_regbusy_read((__dev), PHY_CSR8, PHY_CSR8_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \
+ rt2500usb_regbusy_read((__dev), PHY_CSR10, PHY_CSR10_RF_BUSY, (__reg))
+
+static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u8 value)
+{
+ u16 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the BBP becomes available, afterwards we
+ * can safely write the new data into the register.
+ */
+ if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+ reg = 0;
+ rt2x00_set_field16(&reg, PHY_CSR7_DATA, value);
+ rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
+ rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 0);
+
+ rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
+ }
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u8 *value)
+{
+ u16 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the BBP becomes available, afterwards we
+ * can safely write the read request into the register.
+ * After the data has been written, we wait until hardware
+ * returns the correct value, if at any time the register
+ * doesn't become available in time, reg will be 0xffffffff
+ * which means we return 0xff to the caller.
+ */
+ if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+ reg = 0;
+ rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
+ rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 1);
+
+ rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
+
+ if (WAIT_FOR_BBP(rt2x00dev, &reg))
+ rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, &reg);
+ }
+
+ *value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u32 value)
+{
+ u16 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the RF becomes available, afterwards we
+ * can safely write the new data into the register.
+ */
+ if (WAIT_FOR_RF(rt2x00dev, &reg)) {
+ reg = 0;
+ rt2x00_set_field16(&reg, PHY_CSR9_RF_VALUE, value);
+ rt2500usb_register_write_lock(rt2x00dev, PHY_CSR9, reg);
+
+ reg = 0;
+ rt2x00_set_field16(&reg, PHY_CSR10_RF_VALUE, value >> 16);
+ rt2x00_set_field16(&reg, PHY_CSR10_RF_NUMBER_OF_BITS, 20);
+ rt2x00_set_field16(&reg, PHY_CSR10_RF_IF_SELECT, 0);
+ rt2x00_set_field16(&reg, PHY_CSR10_RF_BUSY, 1);
+
+ rt2500usb_register_write_lock(rt2x00dev, PHY_CSR10, reg);
+ rt2x00_rf_write(rt2x00dev, word, value);
+ }
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+static void _rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u32 *value)
+{
+ rt2500usb_register_read(rt2x00dev, offset, (u16 *)value);
+}
+
+static void _rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u32 value)
+{
+ rt2500usb_register_write(rt2x00dev, offset, value);
+}
+
+static const struct rt2x00debug rt2500usb_rt2x00debug = {
+ .owner = THIS_MODULE,
+ .csr = {
+ .read = _rt2500usb_register_read,
+ .write = _rt2500usb_register_write,
+ .flags = RT2X00DEBUGFS_OFFSET,
+ .word_base = CSR_REG_BASE,
+ .word_size = sizeof(u16),
+ .word_count = CSR_REG_SIZE / sizeof(u16),
+ },
+ .eeprom = {
+ .read = rt2x00_eeprom_read,
+ .write = rt2x00_eeprom_write,
+ .word_base = EEPROM_BASE,
+ .word_size = sizeof(u16),
+ .word_count = EEPROM_SIZE / sizeof(u16),
+ },
+ .bbp = {
+ .read = rt2500usb_bbp_read,
+ .write = rt2500usb_bbp_write,
+ .word_base = BBP_BASE,
+ .word_size = sizeof(u8),
+ .word_count = BBP_SIZE / sizeof(u8),
+ },
+ .rf = {
+ .read = rt2x00_rf_read,
+ .write = rt2500usb_rf_write,
+ .word_base = RF_BASE,
+ .word_size = sizeof(u32),
+ .word_count = RF_SIZE / sizeof(u32),
+ },
+};
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+
+static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
+{
+ u16 reg;
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR19, &reg);
+ return rt2x00_get_field16(reg, MAC_CSR19_VAL7);
+}
+
+#ifdef CONFIG_RT2X00_LIB_LEDS
+static void rt2500usb_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct rt2x00_led *led =
+ container_of(led_cdev, struct rt2x00_led, led_dev);
+ unsigned int enabled = brightness != LED_OFF;
+ u16 reg;
+
+ rt2500usb_register_read(led->rt2x00dev, MAC_CSR20, &reg);
+
+ if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC)
+ rt2x00_set_field16(&reg, MAC_CSR20_LINK, enabled);
+ else if (led->type == LED_TYPE_ACTIVITY)
+ rt2x00_set_field16(&reg, MAC_CSR20_ACTIVITY, enabled);
+
+ rt2500usb_register_write(led->rt2x00dev, MAC_CSR20, reg);
+}
+
+static int rt2500usb_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct rt2x00_led *led =
+ container_of(led_cdev, struct rt2x00_led, led_dev);
+ u16 reg;
+
+ rt2500usb_register_read(led->rt2x00dev, MAC_CSR21, &reg);
+ rt2x00_set_field16(&reg, MAC_CSR21_ON_PERIOD, *delay_on);
+ rt2x00_set_field16(&reg, MAC_CSR21_OFF_PERIOD, *delay_off);
+ rt2500usb_register_write(led->rt2x00dev, MAC_CSR21, reg);
+
+ return 0;
+}
+
+static void rt2500usb_init_led(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_led *led,
+ enum led_type type)
+{
+ led->rt2x00dev = rt2x00dev;
+ led->type = type;
+ led->led_dev.brightness_set = rt2500usb_brightness_set;
+ led->led_dev.blink_set = rt2500usb_blink_set;
+ led->flags = LED_INITIALIZED;
+}
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
+/*
+ * Configuration handlers.
+ */
+
+/*
+ * rt2500usb does not differentiate between shared and pairwise
+ * keys, so we should use the same function for both key types.
+ */
+static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
+{
+ u32 mask;
+ u16 reg;
+ enum cipher curr_cipher;
+
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * Disallow to set WEP key other than with index 0,
+ * it is known that not work at least on some hardware.
+ * SW crypto will be used in that case.
+ */
+ if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+ key->cipher == WLAN_CIPHER_SUITE_WEP104) &&
+ key->keyidx != 0)
+ return -EOPNOTSUPP;
+
+ /*
+ * Pairwise key will always be entry 0, but this
+ * could collide with a shared key on the same
+ * position...
+ */
+ mask = TXRX_CSR0_KEY_ID.bit_mask;
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
+ curr_cipher = rt2x00_get_field16(reg, TXRX_CSR0_ALGORITHM);
+ reg &= mask;
+
+ if (reg && reg == mask)
+ return -ENOSPC;
+
+ reg = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID);
+
+ key->hw_key_idx += reg ? ffz(reg) : 0;
+ /*
+ * Hardware requires that all keys use the same cipher
+ * (e.g. TKIP-only, AES-only, but not TKIP+AES).
+ * If this is not the first key, compare the cipher with the
+ * first one and fall back to SW crypto if not the same.
+ */
+ if (key->hw_key_idx > 0 && crypto->cipher != curr_cipher)
+ return -EOPNOTSUPP;
+
+ rt2500usb_register_multiwrite(rt2x00dev, KEY_ENTRY(key->hw_key_idx),
+ crypto->key, sizeof(crypto->key));
+
+ /*
+ * The driver does not support the IV/EIV generation
+ * in hardware. However it demands the data to be provided
+ * both separately as well as inside the frame.
+ * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib
+ * to ensure rt2x00lib will not strip the data from the
+ * frame after the copy, now we must tell mac80211
+ * to generate the IV/EIV data.
+ */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+ }
+
+ /*
+ * TXRX_CSR0_KEY_ID contains only single-bit fields to indicate
+ * a particular key is valid.
+ */
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR0_ALGORITHM, crypto->cipher);
+ rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
+
+ mask = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID);
+ if (crypto->cmd == SET_KEY)
+ mask |= 1 << key->hw_key_idx;
+ else if (crypto->cmd == DISABLE_KEY)
+ mask &= ~(1 << key->hw_key_idx);
+ rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, mask);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
+
+ return 0;
+}
+
+static void rt2500usb_config_filter(struct rt2x00_dev *rt2x00dev,
+ const unsigned int filter_flags)
+{
+ u16 reg;
+
+ /*
+ * Start configuration steps.
+ * Note that the version error will always be dropped
+ * and broadcast frames will always be accepted since
+ * there is no filter for it at this time.
+ */
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CRC,
+ !(filter_flags & FIF_FCSFAIL));
+ rt2x00_set_field16(&reg, TXRX_CSR2_DROP_PHYSICAL,
+ !(filter_flags & FIF_PLCPFAIL));
+ rt2x00_set_field16(&reg, TXRX_CSR2_DROP_CONTROL,
+ !(filter_flags & FIF_CONTROL));
+ rt2x00_set_field16(&reg, TXRX_CSR2_DROP_NOT_TO_ME, 1);
+ rt2x00_set_field16(&reg, TXRX_CSR2_DROP_TODS,
+ !rt2x00dev->intf_ap_count);
+ rt2x00_set_field16(&reg, TXRX_CSR2_DROP_VERSION_ERROR, 1);
+ rt2x00_set_field16(&reg, TXRX_CSR2_DROP_MULTICAST,
+ !(filter_flags & FIF_ALLMULTI));
+ rt2x00_set_field16(&reg, TXRX_CSR2_DROP_BROADCAST, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
+}
+
+static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_intf *intf,
+ struct rt2x00intf_conf *conf,
+ const unsigned int flags)
+{
+ unsigned int bcn_preload;
+ u16 reg;
+
+ if (flags & CONFIG_UPDATE_TYPE) {
+ /*
+ * Enable beacon config
+ */
+ bcn_preload = PREAMBLE + GET_DURATION(IEEE80211_HEADER, 20);
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR20, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR20_OFFSET, bcn_preload >> 6);
+ rt2x00_set_field16(&reg, TXRX_CSR20_BCN_EXPECT_WINDOW,
+ 2 * (conf->type != NL80211_IFTYPE_STATION));
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg);
+
+ /*
+ * Enable synchronisation.
+ */
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR18_OFFSET, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, conf->sync);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+ }
+
+ if (flags & CONFIG_UPDATE_MAC)
+ rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, conf->mac,
+ (3 * sizeof(__le16)));
+
+ if (flags & CONFIG_UPDATE_BSSID)
+ rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, conf->bssid,
+ (3 * sizeof(__le16)));
+}
+
+static void rt2500usb_config_erp(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_erp *erp,
+ u32 changed)
+{
+ u16 reg;
+
+ if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR10, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR10_AUTORESPOND_PREAMBLE,
+ !!erp->short_preamble);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg);
+ }
+
+ if (changed & BSS_CHANGED_BASIC_RATES)
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR11,
+ erp->basic_rates);
+
+ if (changed & BSS_CHANGED_BEACON_INT) {
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR18_INTERVAL,
+ erp->beacon_int * 4);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
+ }
+
+ if (changed & BSS_CHANGED_ERP_SLOT) {
+ rt2500usb_register_write(rt2x00dev, MAC_CSR10, erp->slot_time);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR11, erp->sifs);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR12, erp->eifs);
+ }
+}
+
+static void rt2500usb_config_ant(struct rt2x00_dev *rt2x00dev,
+ struct antenna_setup *ant)
+{
+ u8 r2;
+ u8 r14;
+ u16 csr5;
+ u16 csr6;
+
+ /*
+ * We should never come here because rt2x00lib is supposed
+ * to catch this and send us the correct antenna explicitely.
+ */
+ BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
+ ant->tx == ANTENNA_SW_DIVERSITY);
+
+ rt2500usb_bbp_read(rt2x00dev, 2, &r2);
+ rt2500usb_bbp_read(rt2x00dev, 14, &r14);
+ rt2500usb_register_read(rt2x00dev, PHY_CSR5, &csr5);
+ rt2500usb_register_read(rt2x00dev, PHY_CSR6, &csr6);
+
+ /*
+ * Configure the TX antenna.
+ */
+ switch (ant->tx) {
+ case ANTENNA_HW_DIVERSITY:
+ rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 1);
+ rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 1);
+ rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 1);
+ break;
+ case ANTENNA_A:
+ rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
+ rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0);
+ rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0);
+ break;
+ case ANTENNA_B:
+ default:
+ rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
+ rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2);
+ rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 2);
+ break;
+ }
+
+ /*
+ * Configure the RX antenna.
+ */
+ switch (ant->rx) {
+ case ANTENNA_HW_DIVERSITY:
+ rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 1);
+ break;
+ case ANTENNA_A:
+ rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
+ break;
+ case ANTENNA_B:
+ default:
+ rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
+ break;
+ }
+
+ /*
+ * RT2525E and RT5222 need to flip TX I/Q
+ */
+ if (rt2x00_rf(rt2x00dev, RF2525E) || rt2x00_rf(rt2x00dev, RF5222)) {
+ rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
+ rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1);
+ rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1);
+
+ /*
+ * RT2525E does not need RX I/Q Flip.
+ */
+ if (rt2x00_rf(rt2x00dev, RF2525E))
+ rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
+ } else {
+ rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0);
+ rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 0);
+ }
+
+ rt2500usb_bbp_write(rt2x00dev, 2, r2);
+ rt2500usb_bbp_write(rt2x00dev, 14, r14);
+ rt2500usb_register_write(rt2x00dev, PHY_CSR5, csr5);
+ rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6);
+}
+
+static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev,
+ struct rf_channel *rf, const int txpower)
+{
+ /*
+ * Set TXpower.
+ */
+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
+
+ /*
+ * For RT2525E we should first set the channel to half band higher.
+ */
+ if (rt2x00_rf(rt2x00dev, RF2525E)) {
+ static const u32 vals[] = {
+ 0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
+ 0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba,
+ 0x000008ba, 0x000008be, 0x000008b7, 0x00000902,
+ 0x00000902, 0x00000906
+ };
+
+ rt2500usb_rf_write(rt2x00dev, 2, vals[rf->channel - 1]);
+ if (rf->rf4)
+ rt2500usb_rf_write(rt2x00dev, 4, rf->rf4);
+ }
+
+ rt2500usb_rf_write(rt2x00dev, 1, rf->rf1);
+ rt2500usb_rf_write(rt2x00dev, 2, rf->rf2);
+ rt2500usb_rf_write(rt2x00dev, 3, rf->rf3);
+ if (rf->rf4)
+ rt2500usb_rf_write(rt2x00dev, 4, rf->rf4);
+}
+
+static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev,
+ const int txpower)
+{
+ u32 rf3;
+
+ rt2x00_rf_read(rt2x00dev, 3, &rf3);
+ rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
+ rt2500usb_rf_write(rt2x00dev, 3, rf3);
+}
+
+static void rt2500usb_config_ps(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_conf *libconf)
+{
+ enum dev_state state =
+ (libconf->conf->flags & IEEE80211_CONF_PS) ?
+ STATE_SLEEP : STATE_AWAKE;
+ u16 reg;
+
+ if (state == STATE_SLEEP) {
+ rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
+ rt2x00_set_field16(&reg, MAC_CSR18_DELAY_AFTER_BEACON,
+ rt2x00dev->beacon_int - 20);
+ rt2x00_set_field16(&reg, MAC_CSR18_BEACONS_BEFORE_WAKEUP,
+ libconf->conf->listen_interval - 1);
+
+ /* We must first disable autowake before it can be enabled */
+ rt2x00_set_field16(&reg, MAC_CSR18_AUTO_WAKE, 0);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
+
+ rt2x00_set_field16(&reg, MAC_CSR18_AUTO_WAKE, 1);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
+ } else {
+ rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
+ rt2x00_set_field16(&reg, MAC_CSR18_AUTO_WAKE, 0);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
+ }
+
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+}
+
+static void rt2500usb_config(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_conf *libconf,
+ const unsigned int flags)
+{
+ if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
+ rt2500usb_config_channel(rt2x00dev, &libconf->rf,
+ libconf->conf->power_level);
+ if ((flags & IEEE80211_CONF_CHANGE_POWER) &&
+ !(flags & IEEE80211_CONF_CHANGE_CHANNEL))
+ rt2500usb_config_txpower(rt2x00dev,
+ libconf->conf->power_level);
+ if (flags & IEEE80211_CONF_CHANGE_PS)
+ rt2500usb_config_ps(rt2x00dev, libconf);
+}
+
+/*
+ * Link tuning
+ */
+static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev,
+ struct link_qual *qual)
+{
+ u16 reg;
+
+ /*
+ * Update FCS error count from register.
+ */
+ rt2500usb_register_read(rt2x00dev, STA_CSR0, &reg);
+ qual->rx_failed = rt2x00_get_field16(reg, STA_CSR0_FCS_ERROR);
+
+ /*
+ * Update False CCA count from register.
+ */
+ rt2500usb_register_read(rt2x00dev, STA_CSR3, &reg);
+ qual->false_cca = rt2x00_get_field16(reg, STA_CSR3_FALSE_CCA_ERROR);
+}
+
+static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev,
+ struct link_qual *qual)
+{
+ u16 eeprom;
+ u16 value;
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &eeprom);
+ value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R24_LOW);
+ rt2500usb_bbp_write(rt2x00dev, 24, value);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &eeprom);
+ value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R25_LOW);
+ rt2500usb_bbp_write(rt2x00dev, 25, value);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &eeprom);
+ value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R61_LOW);
+ rt2500usb_bbp_write(rt2x00dev, 61, value);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &eeprom);
+ value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_VGCUPPER);
+ rt2500usb_bbp_write(rt2x00dev, 17, value);
+
+ qual->vgc_level = value;
+}
+
+/*
+ * Queue handlers.
+ */
+static void rt2500usb_start_queue(struct data_queue *queue)
+{
+ struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+ u16 reg;
+
+ switch (queue->qid) {
+ case QID_RX:
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
+ break;
+ case QID_BEACON:
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
+ rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
+ rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 1);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+ break;
+ default:
+ break;
+ }
+}
+
+static void rt2500usb_stop_queue(struct data_queue *queue)
+{
+ struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+ u16 reg;
+
+ switch (queue->qid) {
+ case QID_RX:
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX, 1);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
+ break;
+ case QID_BEACON:
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 0);
+ rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 0);
+ rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+ break;
+ default:
+ break;
+ }
+}
+
+/*
+ * Initialization functions.
+ */
+static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
+{
+ u16 reg;
+
+ rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0x0001,
+ USB_MODE_TEST, REGISTER_TIMEOUT);
+ rt2x00usb_vendor_request_sw(rt2x00dev, USB_SINGLE_WRITE, 0x0308,
+ 0x00f0, REGISTER_TIMEOUT);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX, 1);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
+
+ rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x1111);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x1e11);
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
+ rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 1);
+ rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 1);
+ rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
+ rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
+ rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
+ rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 0);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR5, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0, 13);
+ rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID0_VALID, 1);
+ rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1, 12);
+ rt2x00_set_field16(&reg, TXRX_CSR5_BBP_ID1_VALID, 1);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR5, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR6, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0, 10);
+ rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID0_VALID, 1);
+ rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1, 11);
+ rt2x00_set_field16(&reg, TXRX_CSR6_BBP_ID1_VALID, 1);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR6, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR7, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0, 7);
+ rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID0_VALID, 1);
+ rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1, 6);
+ rt2x00_set_field16(&reg, TXRX_CSR7_BBP_ID1_VALID, 1);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR7, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR8, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0, 5);
+ rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID0_VALID, 1);
+ rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1, 0);
+ rt2x00_set_field16(&reg, TXRX_CSR8_BBP_ID1_VALID, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 0);
+ rt2x00_set_field16(&reg, TXRX_CSR19_TSF_SYNC, 0);
+ rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 0);
+ rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d);
+
+ if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
+ return -EBUSY;
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR1, &reg);
+ rt2x00_set_field16(&reg, MAC_CSR1_SOFT_RESET, 0);
+ rt2x00_set_field16(&reg, MAC_CSR1_BBP_RESET, 0);
+ rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 1);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
+
+ if (rt2x00_rev(rt2x00dev) >= RT2570_VERSION_C) {
+ rt2500usb_register_read(rt2x00dev, PHY_CSR2, &reg);
+ rt2x00_set_field16(&reg, PHY_CSR2_LNA, 0);
+ } else {
+ reg = 0;
+ rt2x00_set_field16(&reg, PHY_CSR2_LNA, 1);
+ rt2x00_set_field16(&reg, PHY_CSR2_LNA_MODE, 3);
+ }
+ rt2500usb_register_write(rt2x00dev, PHY_CSR2, reg);
+
+ rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0002);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR22, 0x0053);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR15, 0x01ee);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR16, 0x0000);
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR8, &reg);
+ rt2x00_set_field16(&reg, MAC_CSR8_MAX_FRAME_UNIT,
+ rt2x00dev->rx->data_size);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR8, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR0_ALGORITHM, CIPHER_NONE);
+ rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
+ rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
+ rt2x00_set_field16(&reg, MAC_CSR18_DELAY_AFTER_BEACON, 90);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
+
+ rt2500usb_register_read(rt2x00dev, PHY_CSR4, &reg);
+ rt2x00_set_field16(&reg, PHY_CSR4_LOW_RF_LE, 1);
+ rt2500usb_register_write(rt2x00dev, PHY_CSR4, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR1_AUTO_SEQUENCE, 1);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
+
+ return 0;
+}
+
+static int rt2500usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
+{
+ unsigned int i;
+ u8 value;
+
+ for (i = 0; i < REGISTER_USB_BUSY_COUNT; i++) {
+ rt2500usb_bbp_read(rt2x00dev, 0, &value);
+ if ((value != 0xff) && (value != 0x00))
+ return 0;
+ udelay(REGISTER_BUSY_DELAY);
+ }
+
+ rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n");
+ return -EACCES;
+}
+
+static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev)
+{
+ unsigned int i;
+ u16 eeprom;
+ u8 value;
+ u8 reg_id;
+
+ if (unlikely(rt2500usb_wait_bbp_ready(rt2x00dev)))
+ return -EACCES;
+
+ rt2500usb_bbp_write(rt2x00dev, 3, 0x02);
+ rt2500usb_bbp_write(rt2x00dev, 4, 0x19);
+ rt2500usb_bbp_write(rt2x00dev, 14, 0x1c);
+ rt2500usb_bbp_write(rt2x00dev, 15, 0x30);
+ rt2500usb_bbp_write(rt2x00dev, 16, 0xac);
+ rt2500usb_bbp_write(rt2x00dev, 18, 0x18);
+ rt2500usb_bbp_write(rt2x00dev, 19, 0xff);
+ rt2500usb_bbp_write(rt2x00dev, 20, 0x1e);
+ rt2500usb_bbp_write(rt2x00dev, 21, 0x08);
+ rt2500usb_bbp_write(rt2x00dev, 22, 0x08);
+ rt2500usb_bbp_write(rt2x00dev, 23, 0x08);
+ rt2500usb_bbp_write(rt2x00dev, 24, 0x80);
+ rt2500usb_bbp_write(rt2x00dev, 25, 0x50);
+ rt2500usb_bbp_write(rt2x00dev, 26, 0x08);
+ rt2500usb_bbp_write(rt2x00dev, 27, 0x23);
+ rt2500usb_bbp_write(rt2x00dev, 30, 0x10);
+ rt2500usb_bbp_write(rt2x00dev, 31, 0x2b);
+ rt2500usb_bbp_write(rt2x00dev, 32, 0xb9);
+ rt2500usb_bbp_write(rt2x00dev, 34, 0x12);
+ rt2500usb_bbp_write(rt2x00dev, 35, 0x50);
+ rt2500usb_bbp_write(rt2x00dev, 39, 0xc4);
+ rt2500usb_bbp_write(rt2x00dev, 40, 0x02);
+ rt2500usb_bbp_write(rt2x00dev, 41, 0x60);
+ rt2500usb_bbp_write(rt2x00dev, 53, 0x10);
+ rt2500usb_bbp_write(rt2x00dev, 54, 0x18);
+ rt2500usb_bbp_write(rt2x00dev, 56, 0x08);
+ rt2500usb_bbp_write(rt2x00dev, 57, 0x10);
+ rt2500usb_bbp_write(rt2x00dev, 58, 0x08);
+ rt2500usb_bbp_write(rt2x00dev, 61, 0x60);
+ rt2500usb_bbp_write(rt2x00dev, 62, 0x10);
+ rt2500usb_bbp_write(rt2x00dev, 75, 0xff);
+
+ for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
+
+ if (eeprom != 0xffff && eeprom != 0x0000) {
+ reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
+ value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
+ rt2500usb_bbp_write(rt2x00dev, reg_id, value);
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Device state switch handlers.
+ */
+static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev)
+{
+ /*
+ * Initialize all registers.
+ */
+ if (unlikely(rt2500usb_init_registers(rt2x00dev) ||
+ rt2500usb_init_bbp(rt2x00dev)))
+ return -EIO;
+
+ return 0;
+}
+
+static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev)
+{
+ rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121);
+
+ /*
+ * Disable synchronisation.
+ */
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
+
+ rt2x00usb_disable_radio(rt2x00dev);
+}
+
+static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev,
+ enum dev_state state)
+{
+ u16 reg;
+ u16 reg2;
+ unsigned int i;
+ char put_to_sleep;
+ char bbp_state;
+ char rf_state;
+
+ put_to_sleep = (state != STATE_AWAKE);
+
+ reg = 0;
+ rt2x00_set_field16(&reg, MAC_CSR17_BBP_DESIRE_STATE, state);
+ rt2x00_set_field16(&reg, MAC_CSR17_RF_DESIRE_STATE, state);
+ rt2x00_set_field16(&reg, MAC_CSR17_PUT_TO_SLEEP, put_to_sleep);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
+ rt2x00_set_field16(&reg, MAC_CSR17_SET_STATE, 1);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
+
+ /*
+ * Device is not guaranteed to be in the requested state yet.
+ * We must wait until the register indicates that the
+ * device has entered the correct state.
+ */
+ for (i = 0; i < REGISTER_USB_BUSY_COUNT; i++) {
+ rt2500usb_register_read(rt2x00dev, MAC_CSR17, &reg2);
+ bbp_state = rt2x00_get_field16(reg2, MAC_CSR17_BBP_CURR_STATE);
+ rf_state = rt2x00_get_field16(reg2, MAC_CSR17_RF_CURR_STATE);
+ if (bbp_state == state && rf_state == state)
+ return 0;
+ rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
+ msleep(30);
+ }
+
+ return -EBUSY;
+}
+
+static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
+ enum dev_state state)
+{
+ int retval = 0;
+
+ switch (state) {
+ case STATE_RADIO_ON:
+ retval = rt2500usb_enable_radio(rt2x00dev);
+ break;
+ case STATE_RADIO_OFF:
+ rt2500usb_disable_radio(rt2x00dev);
+ break;
+ case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_OFF:
+ /* No support, but no error either */
+ break;
+ case STATE_DEEP_SLEEP:
+ case STATE_SLEEP:
+ case STATE_STANDBY:
+ case STATE_AWAKE:
+ retval = rt2500usb_set_state(rt2x00dev, state);
+ break;
+ default:
+ retval = -ENOTSUPP;
+ break;
+ }
+
+ if (unlikely(retval))
+ rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n",
+ state, retval);
+
+ return retval;
+}
+
+/*
+ * TX descriptor initialization
+ */
+static void rt2500usb_write_tx_desc(struct queue_entry *entry,
+ struct txentry_desc *txdesc)
+{
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ __le32 *txd = (__le32 *) entry->skb->data;
+ u32 word;
+
+ /*
+ * Start writing the descriptor words.
+ */
+ rt2x00_desc_read(txd, 0, &word);
+ rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, txdesc->retry_limit);
+ rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
+ test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_ACK,
+ test_bit(ENTRY_TXD_ACK, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
+ test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_OFDM,
+ (txdesc->rate_mode == RATE_MODE_OFDM));
+ rt2x00_set_field32(&word, TXD_W0_NEW_SEQ,
+ test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->u.plcp.ifs);
+ rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length);
+ rt2x00_set_field32(&word, TXD_W0_CIPHER, !!txdesc->cipher);
+ rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx);
+ rt2x00_desc_write(txd, 0, word);
+
+ rt2x00_desc_read(txd, 1, &word);
+ rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
+ rt2x00_set_field32(&word, TXD_W1_AIFS, entry->queue->aifs);
+ rt2x00_set_field32(&word, TXD_W1_CWMIN, entry->queue->cw_min);
+ rt2x00_set_field32(&word, TXD_W1_CWMAX, entry->queue->cw_max);
+ rt2x00_desc_write(txd, 1, word);
+
+ rt2x00_desc_read(txd, 2, &word);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->u.plcp.signal);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->u.plcp.service);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW,
+ txdesc->u.plcp.length_low);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH,
+ txdesc->u.plcp.length_high);
+ rt2x00_desc_write(txd, 2, word);
+
+ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
+ _rt2x00_desc_write(txd, 3, skbdesc->iv[0]);
+ _rt2x00_desc_write(txd, 4, skbdesc->iv[1]);
+ }
+
+ /*
+ * Register descriptor details in skb frame descriptor.
+ */
+ skbdesc->flags |= SKBDESC_DESC_IN_SKB;
+ skbdesc->desc = txd;
+ skbdesc->desc_len = TXD_DESC_SIZE;
+}
+
+/*
+ * TX data initialization
+ */
+static void rt2500usb_beacondone(struct urb *urb);
+
+static void rt2500usb_write_beacon(struct queue_entry *entry,
+ struct txentry_desc *txdesc)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
+ struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
+ int pipe = usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint);
+ int length;
+ u16 reg, reg0;
+
+ /*
+ * Disable beaconing while we are reloading the beacon data,
+ * otherwise we might be sending out invalid data.
+ */
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+
+ /*
+ * Add space for the descriptor in front of the skb.
+ */
+ skb_push(entry->skb, TXD_DESC_SIZE);
+ memset(entry->skb->data, 0, TXD_DESC_SIZE);
+
+ /*
+ * Write the TX descriptor for the beacon.
+ */
+ rt2500usb_write_tx_desc(entry, txdesc);
+
+ /*
+ * Dump beacon to userspace through debugfs.
+ */
+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
+
+ /*
+ * USB devices cannot blindly pass the skb->len as the
+ * length of the data to usb_fill_bulk_urb. Pass the skb
+ * to the driver to determine what the length should be.
+ */
+ length = rt2x00dev->ops->lib->get_tx_data_len(entry);
+
+ usb_fill_bulk_urb(bcn_priv->urb, usb_dev, pipe,
+ entry->skb->data, length, rt2500usb_beacondone,
+ entry);
+
+ /*
+ * Second we need to create the guardian byte.
+ * We only need a single byte, so lets recycle
+ * the 'flags' field we are not using for beacons.
+ */
+ bcn_priv->guardian_data = 0;
+ usb_fill_bulk_urb(bcn_priv->guardian_urb, usb_dev, pipe,
+ &bcn_priv->guardian_data, 1, rt2500usb_beacondone,
+ entry);
+
+ /*
+ * Send out the guardian byte.
+ */
+ usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC);
+
+ /*
+ * Enable beaconing again.
+ */
+ rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
+ rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
+ reg0 = reg;
+ rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 1);
+ /*
+ * Beacon generation will fail initially.
+ * To prevent this we need to change the TXRX_CSR19
+ * register several times (reg0 is the same as reg
+ * except for TXRX_CSR19_BEACON_GEN, which is 0 in reg0
+ * and 1 in reg).
+ */
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+}
+
+static int rt2500usb_get_tx_data_len(struct queue_entry *entry)
+{
+ int length;
+
+ /*
+ * The length _must_ be a multiple of 2,
+ * but it must _not_ be a multiple of the USB packet size.
+ */
+ length = roundup(entry->skb->len, 2);
+ length += (2 * !(length % entry->queue->usb_maxpacket));
+
+ return length;
+}
+
+/*
+ * RX control handlers
+ */
+static void rt2500usb_fill_rxdone(struct queue_entry *entry,
+ struct rxdone_entry_desc *rxdesc)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct queue_entry_priv_usb *entry_priv = entry->priv_data;
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ __le32 *rxd =
+ (__le32 *)(entry->skb->data +
+ (entry_priv->urb->actual_length -
+ entry->queue->desc_size));
+ u32 word0;
+ u32 word1;
+
+ /*
+ * Copy descriptor to the skbdesc->desc buffer, making it safe from moving of
+ * frame data in rt2x00usb.
+ */
+ memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
+ rxd = (__le32 *)skbdesc->desc;
+
+ /*
+ * It is now safe to read the descriptor on all architectures.
+ */
+ rt2x00_desc_read(rxd, 0, &word0);
+ rt2x00_desc_read(rxd, 1, &word1);
+
+ if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
+ rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
+ if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
+ rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
+
+ rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER);
+ if (rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
+ rxdesc->cipher_status = RX_CRYPTO_FAIL_KEY;
+
+ if (rxdesc->cipher != CIPHER_NONE) {
+ _rt2x00_desc_read(rxd, 2, &rxdesc->iv[0]);
+ _rt2x00_desc_read(rxd, 3, &rxdesc->iv[1]);
+ rxdesc->dev_flags |= RXDONE_CRYPTO_IV;
+
+ /* ICV is located at the end of frame */
+
+ rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+ rxdesc->flags |= RX_FLAG_DECRYPTED;
+ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+ rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+ }
+
+ /*
+ * Obtain the status about this packet.
+ * When frame was received with an OFDM bitrate,
+ * the signal is the PLCP value. If it was received with
+ * a CCK bitrate the signal is the rate in 100kbit/s.
+ */
+ rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
+ rxdesc->rssi =
+ rt2x00_get_field32(word1, RXD_W1_RSSI) - rt2x00dev->rssi_offset;
+ rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
+
+ if (rt2x00_get_field32(word0, RXD_W0_OFDM))
+ rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
+ else
+ rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
+ if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
+ rxdesc->dev_flags |= RXDONE_MY_BSS;
+
+ /*
+ * Adjust the skb memory window to the frame boundaries.
+ */
+ skb_trim(entry->skb, rxdesc->size);
+}
+
+/*
+ * Interrupt functions.
+ */
+static void rt2500usb_beacondone(struct urb *urb)
+{
+ struct queue_entry *entry = (struct queue_entry *)urb->context;
+ struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
+
+ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags))
+ return;
+
+ /*
+ * Check if this was the guardian beacon,
+ * if that was the case we need to send the real beacon now.
+ * Otherwise we should free the sk_buffer, the device
+ * should be doing the rest of the work now.
+ */
+ if (bcn_priv->guardian_urb == urb) {
+ usb_submit_urb(bcn_priv->urb, GFP_ATOMIC);
+ } else if (bcn_priv->urb == urb) {
+ dev_kfree_skb(entry->skb);
+ entry->skb = NULL;
+ }
+}
+
+/*
+ * Device probe functions.
+ */
+static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+ u16 word;
+ u8 *mac;
+ u8 bbp;
+
+ rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
+
+ /*
+ * Start validation of the data that has been read.
+ */
+ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
+ if (!is_valid_ether_addr(mac)) {
+ eth_random_addr(mac);
+ rt2x00_eeprom_dbg(rt2x00dev, "MAC: %pM\n", mac);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
+ ANTENNA_SW_DIVERSITY);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
+ ANTENNA_SW_DIVERSITY);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE,
+ LED_MODE_DEFAULT);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
+ rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
+ rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
+ rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
+ rt2x00_eeprom_dbg(rt2x00dev, "NIC: 0x%04x\n", word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
+ DEFAULT_RSSI_OFFSET);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
+ rt2x00_eeprom_dbg(rt2x00dev, "Calibrate offset: 0x%04x\n",
+ word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_THRESHOLD, 45);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE, word);
+ rt2x00_eeprom_dbg(rt2x00dev, "BBPtune: 0x%04x\n", word);
+ }
+
+ /*
+ * Switch lower vgc bound to current BBP R17 value,
+ * lower the value a bit for better quality.
+ */
+ rt2500usb_bbp_read(rt2x00dev, 17, &bbp);
+ bbp -= 6;
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCUPPER, 0x40);
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
+ rt2x00_eeprom_dbg(rt2x00dev, "BBPtune vgc: 0x%04x\n", word);
+ } else {
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_LOW, 0x48);
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word);
+ rt2x00_eeprom_dbg(rt2x00dev, "BBPtune r17: 0x%04x\n", word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_LOW, 0x40);
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_HIGH, 0x80);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R24, word);
+ rt2x00_eeprom_dbg(rt2x00dev, "BBPtune r24: 0x%04x\n", word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_LOW, 0x40);
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_HIGH, 0x50);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R25, word);
+ rt2x00_eeprom_dbg(rt2x00dev, "BBPtune r25: 0x%04x\n", word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_LOW, 0x60);
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_HIGH, 0x6d);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R61, word);
+ rt2x00_eeprom_dbg(rt2x00dev, "BBPtune r61: 0x%04x\n", word);
+ }
+
+ return 0;
+}
+
+static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+ u16 reg;
+ u16 value;
+ u16 eeprom;
+
+ /*
+ * Read EEPROM word for configuration.
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+ /*
+ * Identify RF chipset.
+ */
+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+ rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+ rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
+
+ if (((reg & 0xfff0) != 0) || ((reg & 0x0000000f) == 0)) {
+ rt2x00_err(rt2x00dev, "Invalid RT chipset detected\n");
+ return -ENODEV;
+ }
+
+ if (!rt2x00_rf(rt2x00dev, RF2522) &&
+ !rt2x00_rf(rt2x00dev, RF2523) &&
+ !rt2x00_rf(rt2x00dev, RF2524) &&
+ !rt2x00_rf(rt2x00dev, RF2525) &&
+ !rt2x00_rf(rt2x00dev, RF2525E) &&
+ !rt2x00_rf(rt2x00dev, RF5222)) {
+ rt2x00_err(rt2x00dev, "Invalid RF chipset detected\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Identify default antenna configuration.
+ */
+ rt2x00dev->default_ant.tx =
+ rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
+ rt2x00dev->default_ant.rx =
+ rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
+
+ /*
+ * When the eeprom indicates SW_DIVERSITY use HW_DIVERSITY instead.
+ * I am not 100% sure about this, but the legacy drivers do not
+ * indicate antenna swapping in software is required when
+ * diversity is enabled.
+ */
+ if (rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
+ rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY;
+ if (rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
+ rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY;
+
+ /*
+ * Store led mode, for correct led behaviour.
+ */
+#ifdef CONFIG_RT2X00_LIB_LEDS
+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
+
+ rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
+ if (value == LED_MODE_TXRX_ACTIVITY ||
+ value == LED_MODE_DEFAULT ||
+ value == LED_MODE_ASUS)
+ rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_qual,
+ LED_TYPE_ACTIVITY);
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
+ /*
+ * Detect if this device has an hardware controlled radio.
+ */
+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
+ __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
+
+ /*
+ * Read the RSSI <-> dBm offset information.
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
+ rt2x00dev->rssi_offset =
+ rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
+
+ return 0;
+}
+
+/*
+ * RF value list for RF2522
+ * Supports: 2.4 GHz
+ */
+static const struct rf_channel rf_vals_bg_2522[] = {
+ { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 },
+ { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 },
+ { 3, 0x00002050, 0x000c2002, 0x00000101, 0 },
+ { 4, 0x00002050, 0x000c2016, 0x00000101, 0 },
+ { 5, 0x00002050, 0x000c202a, 0x00000101, 0 },
+ { 6, 0x00002050, 0x000c203e, 0x00000101, 0 },
+ { 7, 0x00002050, 0x000c2052, 0x00000101, 0 },
+ { 8, 0x00002050, 0x000c2066, 0x00000101, 0 },
+ { 9, 0x00002050, 0x000c207a, 0x00000101, 0 },
+ { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
+ { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
+ { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
+ { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
+ { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
+};
+
+/*
+ * RF value list for RF2523
+ * Supports: 2.4 GHz
+ */
+static const struct rf_channel rf_vals_bg_2523[] = {
+ { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
+ { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
+ { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
+ { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
+ { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
+ { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
+ { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
+ { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
+ { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
+ { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
+ { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
+ { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
+ { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
+ { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
+};
+
+/*
+ * RF value list for RF2524
+ * Supports: 2.4 GHz
+ */
+static const struct rf_channel rf_vals_bg_2524[] = {
+ { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
+ { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
+ { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
+ { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
+ { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
+ { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
+ { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
+ { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
+ { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
+ { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
+ { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
+ { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
+ { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
+ { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
+};
+
+/*
+ * RF value list for RF2525
+ * Supports: 2.4 GHz
+ */
+static const struct rf_channel rf_vals_bg_2525[] = {
+ { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
+ { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
+ { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
+ { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
+ { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
+ { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
+ { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
+ { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
+ { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
+ { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
+ { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
+ { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
+ { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
+ { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
+};
+
+/*
+ * RF value list for RF2525e
+ * Supports: 2.4 GHz
+ */
+static const struct rf_channel rf_vals_bg_2525e[] = {
+ { 1, 0x00022010, 0x0000089a, 0x00060111, 0x00000e1b },
+ { 2, 0x00022010, 0x0000089e, 0x00060111, 0x00000e07 },
+ { 3, 0x00022010, 0x0000089e, 0x00060111, 0x00000e1b },
+ { 4, 0x00022010, 0x000008a2, 0x00060111, 0x00000e07 },
+ { 5, 0x00022010, 0x000008a2, 0x00060111, 0x00000e1b },
+ { 6, 0x00022010, 0x000008a6, 0x00060111, 0x00000e07 },
+ { 7, 0x00022010, 0x000008a6, 0x00060111, 0x00000e1b },
+ { 8, 0x00022010, 0x000008aa, 0x00060111, 0x00000e07 },
+ { 9, 0x00022010, 0x000008aa, 0x00060111, 0x00000e1b },
+ { 10, 0x00022010, 0x000008ae, 0x00060111, 0x00000e07 },
+ { 11, 0x00022010, 0x000008ae, 0x00060111, 0x00000e1b },
+ { 12, 0x00022010, 0x000008b2, 0x00060111, 0x00000e07 },
+ { 13, 0x00022010, 0x000008b2, 0x00060111, 0x00000e1b },
+ { 14, 0x00022010, 0x000008b6, 0x00060111, 0x00000e23 },
+};
+
+/*
+ * RF value list for RF5222
+ * Supports: 2.4 GHz & 5.2 GHz
+ */
+static const struct rf_channel rf_vals_5222[] = {
+ { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
+ { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
+ { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
+ { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
+ { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
+ { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
+ { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
+ { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
+ { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
+ { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
+ { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
+ { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
+ { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
+ { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
+
+ /* 802.11 UNI / HyperLan 2 */
+ { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
+ { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
+ { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
+ { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
+ { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
+ { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
+ { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
+ { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
+
+ /* 802.11 HyperLan 2 */
+ { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
+ { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
+ { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
+ { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
+ { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
+ { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
+ { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
+ { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
+ { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
+ { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
+
+ /* 802.11 UNII */
+ { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
+ { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
+ { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
+ { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
+ { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
+};
+
+static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+{
+ struct hw_mode_spec *spec = &rt2x00dev->spec;
+ struct channel_info *info;
+ char *tx_power;
+ unsigned int i;
+
+ /*
+ * Initialize all hw fields.
+ *
+ * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING unless we are
+ * capable of sending the buffered frames out after the DTIM
+ * transmission using rt2x00lib_beacondone. This will send out
+ * multicast and broadcast traffic immediately instead of buffering it
+ * infinitly and thus dropping it after some time.
+ */
+ ieee80211_hw_set(rt2x00dev->hw, PS_NULLFUNC_STACK);
+ ieee80211_hw_set(rt2x00dev->hw, SUPPORTS_PS);
+ ieee80211_hw_set(rt2x00dev->hw, RX_INCLUDES_FCS);
+ ieee80211_hw_set(rt2x00dev->hw, SIGNAL_DBM);
+
+ /*
+ * Disable powersaving as default.
+ */
+ rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
+ SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
+ SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
+ rt2x00_eeprom_addr(rt2x00dev,
+ EEPROM_MAC_ADDR_0));
+
+ /*
+ * Initialize hw_mode information.
+ */
+ spec->supported_bands = SUPPORT_BAND_2GHZ;
+ spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
+
+ if (rt2x00_rf(rt2x00dev, RF2522)) {
+ spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
+ spec->channels = rf_vals_bg_2522;
+ } else if (rt2x00_rf(rt2x00dev, RF2523)) {
+ spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
+ spec->channels = rf_vals_bg_2523;
+ } else if (rt2x00_rf(rt2x00dev, RF2524)) {
+ spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
+ spec->channels = rf_vals_bg_2524;
+ } else if (rt2x00_rf(rt2x00dev, RF2525)) {
+ spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
+ spec->channels = rf_vals_bg_2525;
+ } else if (rt2x00_rf(rt2x00dev, RF2525E)) {
+ spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
+ spec->channels = rf_vals_bg_2525e;
+ } else if (rt2x00_rf(rt2x00dev, RF5222)) {
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
+ spec->num_channels = ARRAY_SIZE(rf_vals_5222);
+ spec->channels = rf_vals_5222;
+ }
+
+ /*
+ * Create channel information array
+ */
+ info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ spec->channels_info = info;
+
+ tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+ for (i = 0; i < 14; i++) {
+ info[i].max_power = MAX_TXPOWER;
+ info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+ }
+
+ if (spec->num_channels > 14) {
+ for (i = 14; i < spec->num_channels; i++) {
+ info[i].max_power = MAX_TXPOWER;
+ info[i].default_power1 = DEFAULT_TXPOWER;
+ }
+ }
+
+ return 0;
+}
+
+static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
+{
+ int retval;
+ u16 reg;
+
+ /*
+ * Allocate eeprom data.
+ */
+ retval = rt2500usb_validate_eeprom(rt2x00dev);
+ if (retval)
+ return retval;
+
+ retval = rt2500usb_init_eeprom(rt2x00dev);
+ if (retval)
+ return retval;
+
+ /*
+ * Enable rfkill polling by setting GPIO direction of the
+ * rfkill switch GPIO pin correctly.
+ */
+ rt2500usb_register_read(rt2x00dev, MAC_CSR19, &reg);
+ rt2x00_set_field16(&reg, MAC_CSR19_DIR0, 0);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR19, reg);
+
+ /*
+ * Initialize hw specifications.
+ */
+ retval = rt2500usb_probe_hw_mode(rt2x00dev);
+ if (retval)
+ return retval;
+
+ /*
+ * This device requires the atim queue
+ */
+ __set_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_BEACON_GUARD, &rt2x00dev->cap_flags);
+ if (!modparam_nohwcrypt) {
+ __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_COPY_IV, &rt2x00dev->cap_flags);
+ }
+ __set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags);
+ __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
+
+ /*
+ * Set the rssi offset.
+ */
+ rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+
+ return 0;
+}
+
+static const struct ieee80211_ops rt2500usb_mac80211_ops = {
+ .tx = rt2x00mac_tx,
+ .start = rt2x00mac_start,
+ .stop = rt2x00mac_stop,
+ .add_interface = rt2x00mac_add_interface,
+ .remove_interface = rt2x00mac_remove_interface,
+ .config = rt2x00mac_config,
+ .configure_filter = rt2x00mac_configure_filter,
+ .set_tim = rt2x00mac_set_tim,
+ .set_key = rt2x00mac_set_key,
+ .sw_scan_start = rt2x00mac_sw_scan_start,
+ .sw_scan_complete = rt2x00mac_sw_scan_complete,
+ .get_stats = rt2x00mac_get_stats,
+ .bss_info_changed = rt2x00mac_bss_info_changed,
+ .conf_tx = rt2x00mac_conf_tx,
+ .rfkill_poll = rt2x00mac_rfkill_poll,
+ .flush = rt2x00mac_flush,
+ .set_antenna = rt2x00mac_set_antenna,
+ .get_antenna = rt2x00mac_get_antenna,
+ .get_ringparam = rt2x00mac_get_ringparam,
+ .tx_frames_pending = rt2x00mac_tx_frames_pending,
+};
+
+static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
+ .probe_hw = rt2500usb_probe_hw,
+ .initialize = rt2x00usb_initialize,
+ .uninitialize = rt2x00usb_uninitialize,
+ .clear_entry = rt2x00usb_clear_entry,
+ .set_device_state = rt2500usb_set_device_state,
+ .rfkill_poll = rt2500usb_rfkill_poll,
+ .link_stats = rt2500usb_link_stats,
+ .reset_tuner = rt2500usb_reset_tuner,
+ .watchdog = rt2x00usb_watchdog,
+ .start_queue = rt2500usb_start_queue,
+ .kick_queue = rt2x00usb_kick_queue,
+ .stop_queue = rt2500usb_stop_queue,
+ .flush_queue = rt2x00usb_flush_queue,
+ .write_tx_desc = rt2500usb_write_tx_desc,
+ .write_beacon = rt2500usb_write_beacon,
+ .get_tx_data_len = rt2500usb_get_tx_data_len,
+ .fill_rxdone = rt2500usb_fill_rxdone,
+ .config_shared_key = rt2500usb_config_key,
+ .config_pairwise_key = rt2500usb_config_key,
+ .config_filter = rt2500usb_config_filter,
+ .config_intf = rt2500usb_config_intf,
+ .config_erp = rt2500usb_config_erp,
+ .config_ant = rt2500usb_config_ant,
+ .config = rt2500usb_config,
+};
+
+static void rt2500usb_queue_init(struct data_queue *queue)
+{
+ switch (queue->qid) {
+ case QID_RX:
+ queue->limit = 32;
+ queue->data_size = DATA_FRAME_SIZE;
+ queue->desc_size = RXD_DESC_SIZE;
+ queue->priv_size = sizeof(struct queue_entry_priv_usb);
+ break;
+
+ case QID_AC_VO:
+ case QID_AC_VI:
+ case QID_AC_BE:
+ case QID_AC_BK:
+ queue->limit = 32;
+ queue->data_size = DATA_FRAME_SIZE;
+ queue->desc_size = TXD_DESC_SIZE;
+ queue->priv_size = sizeof(struct queue_entry_priv_usb);
+ break;
+
+ case QID_BEACON:
+ queue->limit = 1;
+ queue->data_size = MGMT_FRAME_SIZE;
+ queue->desc_size = TXD_DESC_SIZE;
+ queue->priv_size = sizeof(struct queue_entry_priv_usb_bcn);
+ break;
+
+ case QID_ATIM:
+ queue->limit = 8;
+ queue->data_size = DATA_FRAME_SIZE;
+ queue->desc_size = TXD_DESC_SIZE;
+ queue->priv_size = sizeof(struct queue_entry_priv_usb);
+ break;
+
+ default:
+ BUG();
+ break;
+ }
+}
+
+static const struct rt2x00_ops rt2500usb_ops = {
+ .name = KBUILD_MODNAME,
+ .max_ap_intf = 1,
+ .eeprom_size = EEPROM_SIZE,
+ .rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
+ .queue_init = rt2500usb_queue_init,
+ .lib = &rt2500usb_rt2x00_ops,
+ .hw = &rt2500usb_mac80211_ops,
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+ .debugfs = &rt2500usb_rt2x00debug,
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+};
+
+/*
+ * rt2500usb module information.
+ */
+static struct usb_device_id rt2500usb_device_table[] = {
+ /* ASUS */
+ { USB_DEVICE(0x0b05, 0x1706) },
+ { USB_DEVICE(0x0b05, 0x1707) },
+ /* Belkin */
+ { USB_DEVICE(0x050d, 0x7050) }, /* FCC ID: K7SF5D7050A ver. 2.x */
+ { USB_DEVICE(0x050d, 0x7051) },
+ /* Cisco Systems */
+ { USB_DEVICE(0x13b1, 0x000d) },
+ { USB_DEVICE(0x13b1, 0x0011) },
+ { USB_DEVICE(0x13b1, 0x001a) },
+ /* Conceptronic */
+ { USB_DEVICE(0x14b2, 0x3c02) },
+ /* D-LINK */
+ { USB_DEVICE(0x2001, 0x3c00) },
+ /* Gigabyte */
+ { USB_DEVICE(0x1044, 0x8001) },
+ { USB_DEVICE(0x1044, 0x8007) },
+ /* Hercules */
+ { USB_DEVICE(0x06f8, 0xe000) },
+ /* Melco */
+ { USB_DEVICE(0x0411, 0x005e) },
+ { USB_DEVICE(0x0411, 0x0066) },
+ { USB_DEVICE(0x0411, 0x0067) },
+ { USB_DEVICE(0x0411, 0x008b) },
+ { USB_DEVICE(0x0411, 0x0097) },
+ /* MSI */
+ { USB_DEVICE(0x0db0, 0x6861) },
+ { USB_DEVICE(0x0db0, 0x6865) },
+ { USB_DEVICE(0x0db0, 0x6869) },
+ /* Ralink */
+ { USB_DEVICE(0x148f, 0x1706) },
+ { USB_DEVICE(0x148f, 0x2570) },
+ { USB_DEVICE(0x148f, 0x9020) },
+ /* Sagem */
+ { USB_DEVICE(0x079b, 0x004b) },
+ /* Siemens */
+ { USB_DEVICE(0x0681, 0x3c06) },
+ /* SMC */
+ { USB_DEVICE(0x0707, 0xee13) },
+ /* Spairon */
+ { USB_DEVICE(0x114b, 0x0110) },
+ /* SURECOM */
+ { USB_DEVICE(0x0769, 0x11f3) },
+ /* Trust */
+ { USB_DEVICE(0x0eb0, 0x9020) },
+ /* VTech */
+ { USB_DEVICE(0x0f88, 0x3012) },
+ /* Zinwell */
+ { USB_DEVICE(0x5a57, 0x0260) },
+ { 0, }
+};
+
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Ralink RT2500 USB Wireless LAN driver.");
+MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards");
+MODULE_DEVICE_TABLE(usb, rt2500usb_device_table);
+MODULE_LICENSE("GPL");
+
+static int rt2500usb_probe(struct usb_interface *usb_intf,
+ const struct usb_device_id *id)
+{
+ return rt2x00usb_probe(usb_intf, &rt2500usb_ops);
+}
+
+static struct usb_driver rt2500usb_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = rt2500usb_device_table,
+ .probe = rt2500usb_probe,
+ .disconnect = rt2x00usb_disconnect,
+ .suspend = rt2x00usb_suspend,
+ .resume = rt2x00usb_resume,
+ .reset_resume = rt2x00usb_resume,
+ .disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(rt2500usb_driver);