summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rsi/rsi_mgmt.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rsi/rsi_mgmt.h')
-rw-r--r--drivers/net/wireless/rsi/rsi_mgmt.h76
1 files changed, 76 insertions, 0 deletions
diff --git a/drivers/net/wireless/rsi/rsi_mgmt.h b/drivers/net/wireless/rsi/rsi_mgmt.h
index dfbf7a50269b..dcb6db728cbd 100644
--- a/drivers/net/wireless/rsi/rsi_mgmt.h
+++ b/drivers/net/wireless/rsi/rsi_mgmt.h
@@ -205,6 +205,7 @@ enum cmd_frame_type {
CW_MODE_REQ,
PER_CMD_PKT,
ANT_SEL_FRAME = 0x20,
+ COMMON_DEV_CONFIG = 0x28,
RADIO_PARAMS_UPDATE = 0x29
};
@@ -282,6 +283,76 @@ struct rsi_radio_caps {
__le16 preamble_type;
} __packed;
+/* ULP GPIO flags */
+#define RSI_GPIO_MOTION_SENSOR_ULP_WAKEUP BIT(0)
+#define RSI_GPIO_SLEEP_IND_FROM_DEVICE BIT(1)
+#define RSI_GPIO_2_ULP BIT(2)
+#define RSI_GPIO_PUSH_BUTTON_ULP_WAKEUP BIT(3)
+
+/* SOC GPIO flags */
+#define RSI_GPIO_0_PSPI_CSN_0 BIT(0)
+#define RSI_GPIO_1_PSPI_CSN_1 BIT(1)
+#define RSI_GPIO_2_HOST_WAKEUP_INTR BIT(2)
+#define RSI_GPIO_3_PSPI_DATA_0 BIT(3)
+#define RSI_GPIO_4_PSPI_DATA_1 BIT(4)
+#define RSI_GPIO_5_PSPI_DATA_2 BIT(5)
+#define RSI_GPIO_6_PSPI_DATA_3 BIT(6)
+#define RSI_GPIO_7_I2C_SCL BIT(7)
+#define RSI_GPIO_8_I2C_SDA BIT(8)
+#define RSI_GPIO_9_UART1_RX BIT(9)
+#define RSI_GPIO_10_UART1_TX BIT(10)
+#define RSI_GPIO_11_UART1_RTS_I2S_CLK BIT(11)
+#define RSI_GPIO_12_UART1_CTS_I2S_WS BIT(12)
+#define RSI_GPIO_13_DBG_UART_RX_I2S_DIN BIT(13)
+#define RSI_GPIO_14_DBG_UART_RX_I2S_DOUT BIT(14)
+#define RSI_GPIO_15_LP_WAKEUP_BOOT_BYPASS BIT(15)
+#define RSI_GPIO_16_LED_0 BIT(16)
+#define RSI_GPIO_17_BTCOEX_WLAN_ACT_EXT_ANT_SEL BIT(17)
+#define RSI_GPIO_18_BTCOEX_BT_PRIO_EXT_ANT_SEL BIT(18)
+#define RSI_GPIO_19_BTCOEX_BT_ACT_EXT_ON_OFF BIT(19)
+#define RSI_GPIO_20_RF_RESET BIT(20)
+#define RSI_GPIO_21_SLEEP_IND_FROM_DEVICE BIT(21)
+
+#define RSI_UNUSED_SOC_GPIO_BITMAP (RSI_GPIO_9_UART1_RX | \
+ RSI_GPIO_10_UART1_TX | \
+ RSI_GPIO_11_UART1_RTS_I2S_CLK | \
+ RSI_GPIO_12_UART1_CTS_I2S_WS | \
+ RSI_GPIO_13_DBG_UART_RX_I2S_DIN | \
+ RSI_GPIO_14_DBG_UART_RX_I2S_DOUT | \
+ RSI_GPIO_15_LP_WAKEUP_BOOT_BYPASS | \
+ RSI_GPIO_17_BTCOEX_WLAN_ACT_EXT_ANT_SEL | \
+ RSI_GPIO_18_BTCOEX_BT_PRIO_EXT_ANT_SEL | \
+ RSI_GPIO_19_BTCOEX_BT_ACT_EXT_ON_OFF | \
+ RSI_GPIO_21_SLEEP_IND_FROM_DEVICE)
+
+#define RSI_UNUSED_ULP_GPIO_BITMAP (RSI_GPIO_MOTION_SENSOR_ULP_WAKEUP | \
+ RSI_GPIO_SLEEP_IND_FROM_DEVICE | \
+ RSI_GPIO_2_ULP | \
+ RSI_GPIO_PUSH_BUTTON_ULP_WAKEUP);
+struct rsi_config_vals {
+ __le16 len_qno;
+ u8 pkt_type;
+ u8 misc_flags;
+ __le16 reserved1[6];
+ u8 lp_ps_handshake;
+ u8 ulp_ps_handshake;
+ u8 sleep_config_params; /* 0 for no handshake,
+ * 1 for GPIO based handshake,
+ * 2 packet handshake
+ */
+ u8 unused_ulp_gpio;
+ __le32 unused_soc_gpio_bitmap;
+ u8 ext_pa_or_bt_coex_en;
+ u8 opermode;
+ u8 wlan_rf_pwr_mode;
+ u8 bt_rf_pwr_mode;
+ u8 zigbee_rf_pwr_mode;
+ u8 driver_mode;
+ u8 region_code;
+ u8 antenna_sel_val;
+ u8 reserved2[16];
+} __packed;
+
static inline u32 rsi_get_queueno(u8 *addr, u16 offset)
{
return (le16_to_cpu(*(__le16 *)&addr[offset]) & 0x7000) >> 12;
@@ -307,6 +378,11 @@ static inline u8 rsi_get_channel(u8 *addr)
return *(char *)(addr + 15);
}
+static inline void rsi_set_len_qno(__le16 *addr, u16 len, u8 qno)
+{
+ *addr = cpu_to_le16(len | ((qno & 7) << 12));
+}
+
int rsi_mgmt_pkt_recv(struct rsi_common *common, u8 *msg);
int rsi_set_vap_capabilities(struct rsi_common *common, enum opmode mode,
u8 vap_status);