summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2500usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2500usb.c')
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c443
1 files changed, 271 insertions, 172 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index d3bf7bba611a..30028e2422fc 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -36,6 +36,13 @@
#include "rt2500usb.h"
/*
+ * Allow hardware encryption to be disabled.
+ */
+static int modparam_nohwcrypt = 1;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+/*
* Register access.
* All access to the CSR registers will go through the methods
* rt2500usb_register_read and rt2500usb_register_write.
@@ -47,7 +54,7 @@
* between each attampt. When the busy bit is still set at that time,
* the access attempt is considered to have failed,
* and we will print an error.
- * If the usb_cache_mutex is already held then the _lock variants must
+ * If the csr_mutex is already held then the _lock variants must
* be used instead.
*/
static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
@@ -57,7 +64,7 @@ static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
__le16 reg;
rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
USB_VENDOR_REQUEST_IN, offset,
- &reg, sizeof(u16), REGISTER_TIMEOUT);
+ &reg, sizeof(reg), REGISTER_TIMEOUT);
*value = le16_to_cpu(reg);
}
@@ -68,7 +75,7 @@ static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
__le16 reg;
rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
USB_VENDOR_REQUEST_IN, offset,
- &reg, sizeof(u16), REGISTER_TIMEOUT);
+ &reg, sizeof(reg), REGISTER_TIMEOUT);
*value = le16_to_cpu(reg);
}
@@ -89,7 +96,7 @@ static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
__le16 reg = cpu_to_le16(value);
rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
USB_VENDOR_REQUEST_OUT, offset,
- &reg, sizeof(u16), REGISTER_TIMEOUT);
+ &reg, sizeof(reg), REGISTER_TIMEOUT);
}
static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
@@ -99,7 +106,7 @@ static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
__le16 reg = cpu_to_le16(value);
rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
USB_VENDOR_REQUEST_OUT, offset,
- &reg, sizeof(u16), REGISTER_TIMEOUT);
+ &reg, sizeof(reg), REGISTER_TIMEOUT);
}
static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
@@ -112,53 +119,53 @@ static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
REGISTER_TIMEOUT16(length));
}
-static u16 rt2500usb_bbp_check(struct rt2x00_dev *rt2x00dev)
+static int rt2500usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ struct rt2x00_field16 field,
+ u16 *reg)
{
- u16 reg;
unsigned int i;
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- rt2500usb_register_read_lock(rt2x00dev, PHY_CSR8, &reg);
- if (!rt2x00_get_field16(reg, PHY_CSR8_BUSY))
- break;
+ rt2500usb_register_read_lock(rt2x00dev, offset, reg);
+ if (!rt2x00_get_field16(*reg, field))
+ return 1;
udelay(REGISTER_BUSY_DELAY);
}
- return reg;
+ ERROR(rt2x00dev, "Indirect register access failed: "
+ "offset=0x%.08x, value=0x%.08x\n", offset, *reg);
+ *reg = ~0;
+
+ return 0;
}
+#define WAIT_FOR_BBP(__dev, __reg) \
+ rt2500usb_regbusy_read((__dev), PHY_CSR8, PHY_CSR8_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \
+ rt2500usb_regbusy_read((__dev), PHY_CSR10, PHY_CSR10_RF_BUSY, (__reg))
+
static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev,
const unsigned int word, const u8 value)
{
u16 reg;
- mutex_lock(&rt2x00dev->usb_cache_mutex);
+ mutex_lock(&rt2x00dev->csr_mutex);
/*
- * Wait until the BBP becomes ready.
+ * Wait until the BBP becomes available, afterwards we
+ * can safely write the new data into the register.
*/
- reg = rt2500usb_bbp_check(rt2x00dev);
- if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
- goto exit_fail;
-
- /*
- * Write the data into the BBP.
- */
- reg = 0;
- rt2x00_set_field16(&reg, PHY_CSR7_DATA, value);
- rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
- rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 0);
-
- rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
-
- mutex_unlock(&rt2x00dev->usb_cache_mutex);
-
- return;
+ if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+ reg = 0;
+ rt2x00_set_field16(&reg, PHY_CSR7_DATA, value);
+ rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
+ rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 0);
-exit_fail:
- mutex_unlock(&rt2x00dev->usb_cache_mutex);
+ rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
+ }
- ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
+ mutex_unlock(&rt2x00dev->csr_mutex);
}
static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -166,122 +173,107 @@ static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
{
u16 reg;
- mutex_lock(&rt2x00dev->usb_cache_mutex);
+ mutex_lock(&rt2x00dev->csr_mutex);
/*
- * Wait until the BBP becomes ready.
+ * Wait until the BBP becomes available, afterwards we
+ * can safely write the read request into the register.
+ * After the data has been written, we wait until hardware
+ * returns the correct value, if at any time the register
+ * doesn't become available in time, reg will be 0xffffffff
+ * which means we return 0xff to the caller.
*/
- reg = rt2500usb_bbp_check(rt2x00dev);
- if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
- goto exit_fail;
-
- /*
- * Write the request into the BBP.
- */
- reg = 0;
- rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
- rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 1);
+ if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+ reg = 0;
+ rt2x00_set_field16(&reg, PHY_CSR7_REG_ID, word);
+ rt2x00_set_field16(&reg, PHY_CSR7_READ_CONTROL, 1);
- rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
+ rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
- /*
- * Wait until the BBP becomes ready.
- */
- reg = rt2500usb_bbp_check(rt2x00dev);
- if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
- goto exit_fail;
+ if (WAIT_FOR_BBP(rt2x00dev, &reg))
+ rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, &reg);
+ }
- rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, &reg);
*value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
- mutex_unlock(&rt2x00dev->usb_cache_mutex);
-
- return;
-
-exit_fail:
- mutex_unlock(&rt2x00dev->usb_cache_mutex);
-
- ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
- *value = 0xff;
+ mutex_unlock(&rt2x00dev->csr_mutex);
}
static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev,
const unsigned int word, const u32 value)
{
u16 reg;
- unsigned int i;
if (!word)
return;
- mutex_lock(&rt2x00dev->usb_cache_mutex);
-
- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- rt2500usb_register_read_lock(rt2x00dev, PHY_CSR10, &reg);
- if (!rt2x00_get_field16(reg, PHY_CSR10_RF_BUSY))
- goto rf_write;
- udelay(REGISTER_BUSY_DELAY);
- }
+ mutex_lock(&rt2x00dev->csr_mutex);
- mutex_unlock(&rt2x00dev->usb_cache_mutex);
- ERROR(rt2x00dev, "PHY_CSR10 register busy. Write failed.\n");
- return;
-
-rf_write:
- reg = 0;
- rt2x00_set_field16(&reg, PHY_CSR9_RF_VALUE, value);
- rt2500usb_register_write_lock(rt2x00dev, PHY_CSR9, reg);
+ /*
+ * Wait until the RF becomes available, afterwards we
+ * can safely write the new data into the register.
+ */
+ if (WAIT_FOR_RF(rt2x00dev, &reg)) {
+ reg = 0;
+ rt2x00_set_field16(&reg, PHY_CSR9_RF_VALUE, value);
+ rt2500usb_register_write_lock(rt2x00dev, PHY_CSR9, reg);
- reg = 0;
- rt2x00_set_field16(&reg, PHY_CSR10_RF_VALUE, value >> 16);
- rt2x00_set_field16(&reg, PHY_CSR10_RF_NUMBER_OF_BITS, 20);
- rt2x00_set_field16(&reg, PHY_CSR10_RF_IF_SELECT, 0);
- rt2x00_set_field16(&reg, PHY_CSR10_RF_BUSY, 1);
+ reg = 0;
+ rt2x00_set_field16(&reg, PHY_CSR10_RF_VALUE, value >> 16);
+ rt2x00_set_field16(&reg, PHY_CSR10_RF_NUMBER_OF_BITS, 20);
+ rt2x00_set_field16(&reg, PHY_CSR10_RF_IF_SELECT, 0);
+ rt2x00_set_field16(&reg, PHY_CSR10_RF_BUSY, 1);
- rt2500usb_register_write_lock(rt2x00dev, PHY_CSR10, reg);
- rt2x00_rf_write(rt2x00dev, word, value);
+ rt2500usb_register_write_lock(rt2x00dev, PHY_CSR10, reg);
+ rt2x00_rf_write(rt2x00dev, word, value);
+ }
- mutex_unlock(&rt2x00dev->usb_cache_mutex);
+ mutex_unlock(&rt2x00dev->csr_mutex);
}
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
-#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u16)) )
-
-static void rt2500usb_read_csr(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, u32 *data)
+static void _rt2500usb_register_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u32 *value)
{
- rt2500usb_register_read(rt2x00dev, CSR_OFFSET(word), (u16 *) data);
+ rt2500usb_register_read(rt2x00dev, offset, (u16 *)value);
}
-static void rt2500usb_write_csr(struct rt2x00_dev *rt2x00dev,
- const unsigned int word, u32 data)
+static void _rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u32 value)
{
- rt2500usb_register_write(rt2x00dev, CSR_OFFSET(word), data);
+ rt2500usb_register_write(rt2x00dev, offset, value);
}
static const struct rt2x00debug rt2500usb_rt2x00debug = {
.owner = THIS_MODULE,
.csr = {
- .read = rt2500usb_read_csr,
- .write = rt2500usb_write_csr,
+ .read = _rt2500usb_register_read,
+ .write = _rt2500usb_register_write,
+ .flags = RT2X00DEBUGFS_OFFSET,
+ .word_base = CSR_REG_BASE,
.word_size = sizeof(u16),
.word_count = CSR_REG_SIZE / sizeof(u16),
},
.eeprom = {
.read = rt2x00_eeprom_read,
.write = rt2x00_eeprom_write,
+ .word_base = EEPROM_BASE,
.word_size = sizeof(u16),
.word_count = EEPROM_SIZE / sizeof(u16),
},
.bbp = {
.read = rt2500usb_bbp_read,
.write = rt2500usb_bbp_write,
+ .word_base = BBP_BASE,
.word_size = sizeof(u8),
.word_count = BBP_SIZE / sizeof(u8),
},
.rf = {
.read = rt2x00_rf_read,
.write = rt2500usb_rf_write,
+ .word_base = RF_BASE,
.word_size = sizeof(u32),
.word_count = RF_SIZE / sizeof(u32),
},
@@ -338,6 +330,82 @@ static void rt2500usb_init_led(struct rt2x00_dev *rt2x00dev,
/*
* Configuration handlers.
*/
+
+/*
+ * rt2500usb does not differentiate between shared and pairwise
+ * keys, so we should use the same function for both key types.
+ */
+static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00lib_crypto *crypto,
+ struct ieee80211_key_conf *key)
+{
+ int timeout;
+ u32 mask;
+ u16 reg;
+
+ if (crypto->cmd == SET_KEY) {
+ /*
+ * Pairwise key will always be entry 0, but this
+ * could collide with a shared key on the same
+ * position...
+ */
+ mask = TXRX_CSR0_KEY_ID.bit_mask;
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
+ reg &= mask;
+
+ if (reg && reg == mask)
+ return -ENOSPC;
+
+ reg = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID);
+
+ key->hw_key_idx += reg ? ffz(reg) : 0;
+
+ /*
+ * The encryption key doesn't fit within the CSR cache,
+ * this means we should allocate it seperately and use
+ * rt2x00usb_vendor_request() to send the key to the hardware.
+ */
+ reg = KEY_ENTRY(key->hw_key_idx);
+ timeout = REGISTER_TIMEOUT32(sizeof(crypto->key));
+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT, reg,
+ crypto->key,
+ sizeof(crypto->key),
+ timeout);
+
+ /*
+ * The driver does not support the IV/EIV generation
+ * in hardware. However it doesn't support the IV/EIV
+ * inside the ieee80211 frame either, but requires it
+ * to be provided seperately for the descriptor.
+ * rt2x00lib will cut the IV/EIV data out of all frames
+ * given to us by mac80211, but we must tell mac80211
+ * to generate the IV/EIV data.
+ */
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+ }
+
+ /*
+ * TXRX_CSR0_KEY_ID contains only single-bit fields to indicate
+ * a particular key is valid.
+ */
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR0_ALGORITHM, crypto->cipher);
+ rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
+
+ mask = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID);
+ if (crypto->cmd == SET_KEY)
+ mask |= 1 << key->hw_key_idx;
+ else if (crypto->cmd == DISABLE_KEY)
+ mask &= ~(1 << key->hw_key_idx);
+ rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, mask);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
+
+ return 0;
+}
+
static void rt2500usb_config_filter(struct rt2x00_dev *rt2x00dev,
const unsigned int filter_flags)
{
@@ -380,7 +448,7 @@ static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev,
/*
* Enable beacon config
*/
- bcn_preload = PREAMBLE + get_duration(IEEE80211_HEADER, 20);
+ bcn_preload = PREAMBLE + GET_DURATION(IEEE80211_HEADER, 20);
rt2500usb_register_read(rt2x00dev, TXRX_CSR20, &reg);
rt2x00_set_field16(&reg, TXRX_CSR20_OFFSET, bcn_preload >> 6);
rt2x00_set_field16(&reg, TXRX_CSR20_BCN_EXPECT_WINDOW,
@@ -423,57 +491,16 @@ static void rt2500usb_config_erp(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field16(&reg, TXRX_CSR10_AUTORESPOND_PREAMBLE,
!!erp->short_preamble);
rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg);
-}
-
-static void rt2500usb_config_phymode(struct rt2x00_dev *rt2x00dev,
- const int basic_rate_mask)
-{
- rt2500usb_register_write(rt2x00dev, TXRX_CSR11, basic_rate_mask);
-}
-
-static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev,
- struct rf_channel *rf, const int txpower)
-{
- /*
- * Set TXpower.
- */
- rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
-
- /*
- * For RT2525E we should first set the channel to half band higher.
- */
- if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
- static const u32 vals[] = {
- 0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
- 0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba,
- 0x000008ba, 0x000008be, 0x000008b7, 0x00000902,
- 0x00000902, 0x00000906
- };
-
- rt2500usb_rf_write(rt2x00dev, 2, vals[rf->channel - 1]);
- if (rf->rf4)
- rt2500usb_rf_write(rt2x00dev, 4, rf->rf4);
- }
-
- rt2500usb_rf_write(rt2x00dev, 1, rf->rf1);
- rt2500usb_rf_write(rt2x00dev, 2, rf->rf2);
- rt2500usb_rf_write(rt2x00dev, 3, rf->rf3);
- if (rf->rf4)
- rt2500usb_rf_write(rt2x00dev, 4, rf->rf4);
-}
-static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev,
- const int txpower)
-{
- u32 rf3;
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR11, erp->basic_rates);
- rt2x00_rf_read(rt2x00dev, 3, &rf3);
- rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
- rt2500usb_rf_write(rt2x00dev, 3, rf3);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR10, erp->slot_time);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR11, erp->sifs);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR12, erp->eifs);
}
-static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev,
- struct antenna_setup *ant)
+static void rt2500usb_config_ant(struct rt2x00_dev *rt2x00dev,
+ struct antenna_setup *ant)
{
u8 r2;
u8 r14;
@@ -555,15 +582,52 @@ static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev,
rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6);
}
+static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev,
+ struct rf_channel *rf, const int txpower)
+{
+ /*
+ * Set TXpower.
+ */
+ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
+
+ /*
+ * For RT2525E we should first set the channel to half band higher.
+ */
+ if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
+ static const u32 vals[] = {
+ 0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
+ 0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba,
+ 0x000008ba, 0x000008be, 0x000008b7, 0x00000902,
+ 0x00000902, 0x00000906
+ };
+
+ rt2500usb_rf_write(rt2x00dev, 2, vals[rf->channel - 1]);
+ if (rf->rf4)
+ rt2500usb_rf_write(rt2x00dev, 4, rf->rf4);
+ }
+
+ rt2500usb_rf_write(rt2x00dev, 1, rf->rf1);
+ rt2500usb_rf_write(rt2x00dev, 2, rf->rf2);
+ rt2500usb_rf_write(rt2x00dev, 3, rf->rf3);
+ if (rf->rf4)
+ rt2500usb_rf_write(rt2x00dev, 4, rf->rf4);
+}
+
+static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev,
+ const int txpower)
+{
+ u32 rf3;
+
+ rt2x00_rf_read(rt2x00dev, 3, &rf3);
+ rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
+ rt2500usb_rf_write(rt2x00dev, 3, rf3);
+}
+
static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf)
{
u16 reg;
- rt2500usb_register_write(rt2x00dev, MAC_CSR10, libconf->slot_time);
- rt2500usb_register_write(rt2x00dev, MAC_CSR11, libconf->sifs);
- rt2500usb_register_write(rt2x00dev, MAC_CSR12, libconf->eifs);
-
rt2500usb_register_read(rt2x00dev, TXRX_CSR18, &reg);
rt2x00_set_field16(&reg, TXRX_CSR18_INTERVAL,
libconf->conf->beacon_int * 4);
@@ -574,17 +638,14 @@ static void rt2500usb_config(struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf,
const unsigned int flags)
{
- if (flags & CONFIG_UPDATE_PHYMODE)
- rt2500usb_config_phymode(rt2x00dev, libconf->basic_rates);
- if (flags & CONFIG_UPDATE_CHANNEL)
+ if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
rt2500usb_config_channel(rt2x00dev, &libconf->rf,
libconf->conf->power_level);
- if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
+ if ((flags & IEEE80211_CONF_CHANGE_POWER) &&
+ !(flags & IEEE80211_CONF_CHANGE_CHANNEL))
rt2500usb_config_txpower(rt2x00dev,
libconf->conf->power_level);
- if (flags & CONFIG_UPDATE_ANTENNA)
- rt2500usb_config_antenna(rt2x00dev, &libconf->ant);
- if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
+ if (flags & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
rt2500usb_config_duration(rt2x00dev, libconf);
}
@@ -866,7 +927,7 @@ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
- rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, 0xff);
+ rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, 0);
rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
@@ -1088,7 +1149,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
* Start writing the descriptor words.
*/
rt2x00_desc_read(txd, 1, &word);
- rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
+ rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
rt2x00_set_field32(&word, TXD_W1_AIFS, txdesc->aifs);
rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
@@ -1101,6 +1162,11 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
rt2x00_desc_write(txd, 2, word);
+ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
+ _rt2x00_desc_write(txd, 3, skbdesc->iv[0]);
+ _rt2x00_desc_write(txd, 4, skbdesc->iv[1]);
+ }
+
rt2x00_desc_read(txd, 0, &word);
rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, txdesc->retry_limit);
rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
@@ -1115,7 +1181,8 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
- rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE);
+ rt2x00_set_field32(&word, TXD_W0_CIPHER, txdesc->cipher);
+ rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx);
rt2x00_desc_write(txd, 0, word);
}
@@ -1130,7 +1197,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
- int pipe = usb_sndbulkpipe(usb_dev, 1);
+ int pipe = usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint);
int length;
u16 reg;
@@ -1156,7 +1223,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
* length of the data to usb_fill_bulk_urb. Pass the skb
* to the driver to determine what the length should be.
*/
- length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, entry->skb);
+ length = rt2x00dev->ops->lib->get_tx_data_len(entry);
usb_fill_bulk_urb(bcn_priv->urb, usb_dev, pipe,
entry->skb->data, length, rt2500usb_beacondone,
@@ -1178,8 +1245,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC);
}
-static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
- struct sk_buff *skb)
+static int rt2500usb_get_tx_data_len(struct queue_entry *entry)
{
int length;
@@ -1187,8 +1253,8 @@ static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
* The length _must_ be a multiple of 2,
* but it must _not_ be a multiple of the USB packet size.
*/
- length = roundup(skb->len, 2);
- length += (2 * !(length % rt2x00dev->usb_maxpacket));
+ length = roundup(entry->skb->len, 2);
+ length += (2 * !(length % entry->queue->usb_maxpacket));
return length;
}
@@ -1227,6 +1293,7 @@ static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
static void rt2500usb_fill_rxdone(struct queue_entry *entry,
struct rxdone_entry_desc *rxdesc)
{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct queue_entry_priv_usb *entry_priv = entry->priv_data;
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
__le32 *rxd =
@@ -1254,6 +1321,33 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry,
if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+ rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER);
+ if (rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
+ rxdesc->cipher_status = RX_CRYPTO_FAIL_KEY;
+ }
+
+ if (rxdesc->cipher != CIPHER_NONE) {
+ _rt2x00_desc_read(rxd, 2, &rxdesc->iv[0]);
+ _rt2x00_desc_read(rxd, 3, &rxdesc->iv[1]);
+ rxdesc->dev_flags |= RXDONE_CRYPTO_IV;
+
+ /* ICV is located at the end of frame */
+
+ /*
+ * Hardware has stripped IV/EIV data from 802.11 frame during
+ * decryption. It has provided the data seperately but rt2x00lib
+ * should decide if it should be reinserted.
+ */
+ rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+ if (rxdesc->cipher != CIPHER_TKIP)
+ rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+ rxdesc->flags |= RX_FLAG_DECRYPTED;
+ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+ rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+ }
+
/*
* Obtain the status about this packet.
* When frame was received with an OFDM bitrate,
@@ -1261,8 +1355,8 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry,
* a CCK bitrate the signal is the rate in 100kbit/s.
*/
rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
- rxdesc->rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) -
- entry->queue->rt2x00dev->rssi_offset;
+ rxdesc->rssi =
+ rt2x00_get_field32(word1, RXD_W1_RSSI) - rt2x00dev->rssi_offset;
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
if (rt2x00_get_field32(word0, RXD_W0_OFDM))
@@ -1319,10 +1413,8 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
*/
mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
if (!is_valid_ether_addr(mac)) {
- DECLARE_MAC_BUF(macbuf);
-
random_ether_addr(mac);
- EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
+ EEPROM(rt2x00dev, "MAC: %pM\n", mac);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
@@ -1752,6 +1844,10 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
__set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
__set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
+ if (!modparam_nohwcrypt) {
+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+ __set_bit(CONFIG_CRYPTO_COPY_IV, &rt2x00dev->flags);
+ }
__set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
/*
@@ -1771,6 +1867,7 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = {
.config = rt2x00mac_config,
.config_interface = rt2x00mac_config_interface,
.configure_filter = rt2x00mac_configure_filter,
+ .set_key = rt2x00mac_set_key,
.get_stats = rt2x00mac_get_stats,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt2x00mac_conf_tx,
@@ -1781,8 +1878,7 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
.probe_hw = rt2500usb_probe_hw,
.initialize = rt2x00usb_initialize,
.uninitialize = rt2x00usb_uninitialize,
- .init_rxentry = rt2x00usb_init_rxentry,
- .init_txentry = rt2x00usb_init_txentry,
+ .clear_entry = rt2x00usb_clear_entry,
.set_device_state = rt2500usb_set_device_state,
.link_stats = rt2500usb_link_stats,
.reset_tuner = rt2500usb_reset_tuner,
@@ -1793,9 +1889,12 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
.get_tx_data_len = rt2500usb_get_tx_data_len,
.kick_tx_queue = rt2500usb_kick_tx_queue,
.fill_rxdone = rt2500usb_fill_rxdone,
+ .config_shared_key = rt2500usb_config_key,
+ .config_pairwise_key = rt2500usb_config_key,
.config_filter = rt2500usb_config_filter,
.config_intf = rt2500usb_config_intf,
.config_erp = rt2500usb_config_erp,
+ .config_ant = rt2500usb_config_ant,
.config = rt2500usb_config,
};