diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ethernet/mediatek/mtk_eth_soc.c | 59 | ||||
| -rw-r--r-- | drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 |
2 files changed, 17 insertions, 43 deletions
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 18a8aca7944d..fe8b7e38decc 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -385,10 +385,8 @@ static int mt7621_gmac0_rgmii_adjust(struct mtk_eth *eth, } static void mtk_gmac0_rgmii_adjust(struct mtk_eth *eth, - phy_interface_t interface, int speed) + phy_interface_t interface) { - unsigned long rate; - u32 tck, rck, intf; int ret; if (interface == PHY_INTERFACE_MODE_TRGMII) { @@ -399,30 +397,7 @@ static void mtk_gmac0_rgmii_adjust(struct mtk_eth *eth, return; } - if (speed == SPEED_1000) { - intf = INTF_MODE_RGMII_1000; - rate = 250000000; - rck = RCK_CTRL_RGMII_1000; - tck = TCK_CTRL_RGMII_1000; - } else { - intf = INTF_MODE_RGMII_10_100; - rate = 500000000; - rck = RCK_CTRL_RGMII_10_100; - tck = TCK_CTRL_RGMII_10_100; - } - - mtk_w32(eth, intf, INTF_MODE); - - regmap_update_bits(eth->ethsys, ETHSYS_CLKCFG0, - ETHSYS_TRGMII_CLK_SEL362_5, - ETHSYS_TRGMII_CLK_SEL362_5); - - ret = clk_set_rate(eth->clks[MTK_CLK_TRGPLL], rate); - if (ret) - dev_err(eth->dev, "Failed to set trgmii pll: %d\n", ret); - - mtk_w32(eth, rck, TRGMII_RCK_CTRL); - mtk_w32(eth, tck, TRGMII_TCK_CTRL); + dev_err(eth->dev, "Missing PLL configuration, ethernet may not work\n"); } static struct phylink_pcs *mtk_mac_select_pcs(struct phylink_config *config, @@ -498,17 +473,8 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode, state->interface)) goto err_phy; } else { - /* FIXME: this is incorrect. Not only does it - * use state->speed (which is not guaranteed - * to be correct) but it also makes use of it - * in a code path that will only be reachable - * when the PHY interface mode changes, not - * when the speed changes. Consequently, RGMII - * is probably broken. - */ mtk_gmac0_rgmii_adjust(mac->hw, - state->interface, - state->speed); + state->interface); /* mt7623_pad_clk_setup */ for (i = 0 ; i < NUM_TRGMII_CTRL; i++) @@ -4366,13 +4332,19 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np) mac->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD; - __set_bit(PHY_INTERFACE_MODE_MII, - mac->phylink_config.supported_interfaces); - __set_bit(PHY_INTERFACE_MODE_GMII, - mac->phylink_config.supported_interfaces); + /* MT7623 gmac0 is now missing its speed-specific PLL configuration + * in its .mac_config method (since state->speed is not valid there. + * Disable support for MII, GMII and RGMII. + */ + if (!mac->hw->soc->disable_pll_modes || mac->id != 0) { + __set_bit(PHY_INTERFACE_MODE_MII, + mac->phylink_config.supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_GMII, + mac->phylink_config.supported_interfaces); - if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_RGMII)) - phy_interface_set_rgmii(mac->phylink_config.supported_interfaces); + if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_RGMII)) + phy_interface_set_rgmii(mac->phylink_config.supported_interfaces); + } if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_TRGMII) && !mac->id) __set_bit(PHY_INTERFACE_MODE_TRGMII, @@ -4845,6 +4817,7 @@ static const struct mtk_soc_data mt7623_data = { .offload_version = 1, .hash_offset = 2, .foe_entry_size = MTK_FOE_ENTRY_V1_SIZE, + .disable_pll_modes = true, .txrx = { .txd_size = sizeof(struct mtk_tx_dma), .rxd_size = sizeof(struct mtk_rx_dma), diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h index 707445f6bcb1..28adda0c90c0 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h @@ -1030,6 +1030,7 @@ struct mtk_soc_data { u16 foe_entry_size; netdev_features_t hw_features; bool has_accounting; + bool disable_pll_modes; struct { u32 txd_size; u32 rxd_size; |