diff options
Diffstat (limited to 'drivers/net')
21 files changed, 76 insertions, 393 deletions
diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index d42ec7d1bc14..9a4ebda30510 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -664,10 +664,9 @@ static void slcan_close(struct tty_struct *tty) /* This will complete via sl_free_netdev */ } -static int slcan_hangup(struct tty_struct *tty) +static void slcan_hangup(struct tty_struct *tty) { slcan_close(tty); - return 0; } /* Perform I/O control on an active SLCAN channel. */ @@ -692,7 +691,7 @@ static int slcan_ioctl(struct tty_struct *tty, struct file *file, return -EINVAL; default: - return tty_mode_ioctl(tty, file, cmd, arg); + return tty_mode_ioctl(tty, cmd, arg); } } diff --git a/drivers/net/ethernet/chelsio/cxgb3/common.h b/drivers/net/ethernet/chelsio/cxgb3/common.h index a309016f7f8c..ecd025dda8d6 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/common.h +++ b/drivers/net/ethernet/chelsio/cxgb3/common.h @@ -676,8 +676,6 @@ void t3_link_changed(struct adapter *adapter, int port_id); void t3_link_fault(struct adapter *adapter, int port_id); int t3_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc); const struct adapter_info *t3_get_adapter_info(unsigned int board_id); -int t3_seeprom_read(struct adapter *adapter, u32 addr, __le32 *data); -int t3_seeprom_write(struct adapter *adapter, u32 addr, __le32 data); int t3_seeprom_wp(struct adapter *adapter, int enable); int t3_get_tp_version(struct adapter *adapter, u32 *vers); int t3_check_tpsram_version(struct adapter *adapter); diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c index 9cf9e33664e4..bfffcaeee624 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c @@ -2036,20 +2036,16 @@ static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e, { struct port_info *pi = netdev_priv(dev); struct adapter *adapter = pi->adapter; - int i, err = 0; - - u8 *buf = kmalloc(EEPROMSIZE, GFP_KERNEL); - if (!buf) - return -ENOMEM; + int cnt; e->magic = EEPROM_MAGIC; - for (i = e->offset & ~3; !err && i < e->offset + e->len; i += 4) - err = t3_seeprom_read(adapter, i, (__le32 *) & buf[i]); + cnt = pci_read_vpd(adapter->pdev, e->offset, e->len, data); + if (cnt < 0) + return cnt; - if (!err) - memcpy(data, buf + e->offset, e->len); - kfree(buf); - return err; + e->len = cnt; + + return 0; } static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, @@ -2058,7 +2054,6 @@ static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, struct port_info *pi = netdev_priv(dev); struct adapter *adapter = pi->adapter; u32 aligned_offset, aligned_len; - __le32 *p; u8 *buf; int err; @@ -2072,12 +2067,9 @@ static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, buf = kmalloc(aligned_len, GFP_KERNEL); if (!buf) return -ENOMEM; - err = t3_seeprom_read(adapter, aligned_offset, (__le32 *) buf); - if (!err && aligned_len > 4) - err = t3_seeprom_read(adapter, - aligned_offset + aligned_len - 4, - (__le32 *) & buf[aligned_len - 4]); - if (err) + err = pci_read_vpd(adapter->pdev, aligned_offset, aligned_len, + buf); + if (err < 0) goto out; memcpy(buf + (eeprom->offset & 3), data, eeprom->len); } else @@ -2087,17 +2079,13 @@ static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, if (err) goto out; - for (p = (__le32 *) buf; !err && aligned_len; aligned_len -= 4, p++) { - err = t3_seeprom_write(adapter, aligned_offset, *p); - aligned_offset += 4; - } - - if (!err) + err = pci_write_vpd(adapter->pdev, aligned_offset, aligned_len, buf); + if (err >= 0) err = t3_seeprom_wp(adapter, 1); out: if (buf != data) kfree(buf); - return err; + return err < 0 ? err : 0; } static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) diff --git a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c index 53feac8da503..da41eee2f25c 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c @@ -596,81 +596,10 @@ struct t3_vpd { u32 pad; /* for multiple-of-4 sizing and alignment */ }; -#define EEPROM_MAX_POLL 40 #define EEPROM_STAT_ADDR 0x4000 #define VPD_BASE 0xc00 /** - * t3_seeprom_read - read a VPD EEPROM location - * @adapter: adapter to read - * @addr: EEPROM address - * @data: where to store the read data - * - * Read a 32-bit word from a location in VPD EEPROM using the card's PCI - * VPD ROM capability. A zero is written to the flag bit when the - * address is written to the control register. The hardware device will - * set the flag to 1 when 4 bytes have been read into the data register. - */ -int t3_seeprom_read(struct adapter *adapter, u32 addr, __le32 *data) -{ - u16 val; - int attempts = EEPROM_MAX_POLL; - u32 v; - unsigned int base = adapter->params.pci.vpd_cap_addr; - - if ((addr >= EEPROMSIZE && addr != EEPROM_STAT_ADDR) || (addr & 3)) - return -EINVAL; - - pci_write_config_word(adapter->pdev, base + PCI_VPD_ADDR, addr); - do { - udelay(10); - pci_read_config_word(adapter->pdev, base + PCI_VPD_ADDR, &val); - } while (!(val & PCI_VPD_ADDR_F) && --attempts); - - if (!(val & PCI_VPD_ADDR_F)) { - CH_ERR(adapter, "reading EEPROM address 0x%x failed\n", addr); - return -EIO; - } - pci_read_config_dword(adapter->pdev, base + PCI_VPD_DATA, &v); - *data = cpu_to_le32(v); - return 0; -} - -/** - * t3_seeprom_write - write a VPD EEPROM location - * @adapter: adapter to write - * @addr: EEPROM address - * @data: value to write - * - * Write a 32-bit word to a location in VPD EEPROM using the card's PCI - * VPD ROM capability. - */ -int t3_seeprom_write(struct adapter *adapter, u32 addr, __le32 data) -{ - u16 val; - int attempts = EEPROM_MAX_POLL; - unsigned int base = adapter->params.pci.vpd_cap_addr; - - if ((addr >= EEPROMSIZE && addr != EEPROM_STAT_ADDR) || (addr & 3)) - return -EINVAL; - - pci_write_config_dword(adapter->pdev, base + PCI_VPD_DATA, - le32_to_cpu(data)); - pci_write_config_word(adapter->pdev,base + PCI_VPD_ADDR, - addr | PCI_VPD_ADDR_F); - do { - msleep(1); - pci_read_config_word(adapter->pdev, base + PCI_VPD_ADDR, &val); - } while ((val & PCI_VPD_ADDR_F) && --attempts); - - if (val & PCI_VPD_ADDR_F) { - CH_ERR(adapter, "write to EEPROM address 0x%x failed\n", addr); - return -EIO; - } - return 0; -} - -/** * t3_seeprom_wp - enable/disable EEPROM write protection * @adapter: the adapter * @enable: 1 to enable write protection, 0 to disable it @@ -679,7 +608,14 @@ int t3_seeprom_write(struct adapter *adapter, u32 addr, __le32 data) */ int t3_seeprom_wp(struct adapter *adapter, int enable) { - return t3_seeprom_write(adapter, EEPROM_STAT_ADDR, enable ? 0xc : 0); + u32 data = enable ? 0xc : 0; + int ret; + + /* EEPROM_STAT_ADDR is outside VPD area, use pci_write_vpd_any() */ + ret = pci_write_vpd_any(adapter->pdev, EEPROM_STAT_ADDR, sizeof(u32), + &data); + + return ret < 0 ? ret : 0; } static int vpdstrtouint(char *s, u8 len, unsigned int base, unsigned int *val) @@ -709,24 +645,22 @@ static int vpdstrtou16(char *s, u8 len, unsigned int base, u16 *val) */ static int get_vpd_params(struct adapter *adapter, struct vpd_params *p) { - int i, addr, ret; struct t3_vpd vpd; + u8 base_val = 0; + int addr, ret; /* * Card information is normally at VPD_BASE but some early cards had * it at 0. */ - ret = t3_seeprom_read(adapter, VPD_BASE, (__le32 *)&vpd); - if (ret) + ret = pci_read_vpd(adapter->pdev, VPD_BASE, 1, &base_val); + if (ret < 0) return ret; - addr = vpd.id_tag == 0x82 ? VPD_BASE : 0; + addr = base_val == PCI_VPD_LRDT_ID_STRING ? VPD_BASE : 0; - for (i = 0; i < sizeof(vpd); i += 4) { - ret = t3_seeprom_read(adapter, addr + i, - (__le32 *)((u8 *)&vpd + i)); - if (ret) - return ret; - } + ret = pci_read_vpd(adapter->pdev, addr, sizeof(vpd), &vpd); + if (ret < 0) + return ret; ret = vpdstrtouint(vpd.cclk_data, vpd.cclk_len, 10, &p->cclk); if (ret) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c index 057024278cf4..c8442b86df94 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c @@ -610,7 +610,7 @@ static void hns3_get_drvinfo(struct net_device *netdev, return; } - strncpy(drvinfo->driver, h->pdev->driver->name, + strncpy(drvinfo->driver, dev_driver_string(&h->pdev->dev), sizeof(drvinfo->driver)); drvinfo->driver[sizeof(drvinfo->driver) - 1] = '\0'; diff --git a/drivers/net/ethernet/marvell/prestera/prestera_pci.c b/drivers/net/ethernet/marvell/prestera/prestera_pci.c index 461259b3655a..f538a749ebd4 100644 --- a/drivers/net/ethernet/marvell/prestera/prestera_pci.c +++ b/drivers/net/ethernet/marvell/prestera/prestera_pci.c @@ -777,7 +777,7 @@ out_release: static int prestera_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { - const char *driver_name = pdev->driver->name; + const char *driver_name = dev_driver_string(&pdev->dev); struct prestera_fw *fw; int err; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c index 84297cc1b509..ea1efdecc88c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c @@ -474,11 +474,13 @@ int mlx5i_dev_init(struct net_device *dev) { struct mlx5e_priv *priv = mlx5i_epriv(dev); struct mlx5i_priv *ipriv = priv->ppriv; + u8 addr_mod[3]; /* Set dev address using underlay QP */ - dev->dev_addr[1] = (ipriv->qpn >> 16) & 0xff; - dev->dev_addr[2] = (ipriv->qpn >> 8) & 0xff; - dev->dev_addr[3] = (ipriv->qpn) & 0xff; + addr_mod[0] = (ipriv->qpn >> 16) & 0xff; + addr_mod[1] = (ipriv->qpn >> 8) & 0xff; + addr_mod[2] = (ipriv->qpn) & 0xff; + dev_addr_mod(dev, 1, addr_mod, sizeof(addr_mod)); /* Add QPN to net-device mapping to HT */ mlx5i_pkey_add_qpn(dev, ipriv->qpn); diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/Makefile b/drivers/net/ethernet/mellanox/mlxbf_gige/Makefile index e57c1375f236..a97c2bef846b 100644 --- a/drivers/net/ethernet/mellanox/mlxbf_gige/Makefile +++ b/drivers/net/ethernet/mellanox/mlxbf_gige/Makefile @@ -3,7 +3,6 @@ obj-$(CONFIG_MLXBF_GIGE) += mlxbf_gige.o mlxbf_gige-y := mlxbf_gige_ethtool.o \ - mlxbf_gige_gpio.o \ mlxbf_gige_intr.o \ mlxbf_gige_main.o \ mlxbf_gige_mdio.o \ diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h index e3509e69ed1c..86826a70f9dd 100644 --- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h +++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h @@ -51,11 +51,6 @@ #define MLXBF_GIGE_ERROR_INTR_IDX 0 #define MLXBF_GIGE_RECEIVE_PKT_INTR_IDX 1 #define MLXBF_GIGE_LLU_PLU_INTR_IDX 2 -#define MLXBF_GIGE_PHY_INT_N 3 - -#define MLXBF_GIGE_MDIO_DEFAULT_PHY_ADDR 0x3 - -#define MLXBF_GIGE_DEFAULT_PHY_INT_GPIO 12 struct mlxbf_gige_stats { u64 hw_access_errors; @@ -81,11 +76,7 @@ struct mlxbf_gige { struct platform_device *pdev; void __iomem *mdio_io; struct mii_bus *mdiobus; - void __iomem *gpio_io; - struct irq_domain *irqdomain; - u32 phy_int_gpio_mask; spinlock_t lock; /* for packet processing indices */ - spinlock_t gpio_lock; /* for GPIO bus access */ u16 rx_q_entries; u16 tx_q_entries; u64 *tx_wqe_base; @@ -184,7 +175,4 @@ int mlxbf_gige_poll(struct napi_struct *napi, int budget); extern const struct ethtool_ops mlxbf_gige_ethtool_ops; void mlxbf_gige_update_tx_wqe_next(struct mlxbf_gige *priv); -int mlxbf_gige_gpio_init(struct platform_device *pdev, struct mlxbf_gige *priv); -void mlxbf_gige_gpio_free(struct mlxbf_gige *priv); - #endif /* !defined(__MLXBF_GIGE_H__) */ diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_gpio.c b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_gpio.c deleted file mode 100644 index a8d966db5715..000000000000 --- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_gpio.c +++ /dev/null @@ -1,212 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause - -/* Initialize and handle GPIO interrupt triggered by INT_N PHY signal. - * This GPIO interrupt triggers the PHY state machine to bring the link - * up/down. - * - * Copyright (C) 2021 NVIDIA CORPORATION & AFFILIATES - */ - -#include <linux/acpi.h> -#include <linux/bitfield.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/gpio/driver.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/irqdomain.h> -#include <linux/irqreturn.h> -#include <linux/platform_device.h> -#include <linux/property.h> - -#include "mlxbf_gige.h" -#include "mlxbf_gige_regs.h" - -#define MLXBF_GIGE_GPIO_CAUSE_FALL_EN 0x48 -#define MLXBF_GIGE_GPIO_CAUSE_OR_CAUSE_EVTEN0 0x80 -#define MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0 0x94 -#define MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE 0x98 - -static void mlxbf_gige_gpio_enable(struct mlxbf_gige *priv) -{ - unsigned long flags; - u32 val; - - spin_lock_irqsave(&priv->gpio_lock, flags); - val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE); - val |= priv->phy_int_gpio_mask; - writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE); - - /* The INT_N interrupt level is active low. - * So enable cause fall bit to detect when GPIO - * state goes low. - */ - val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_FALL_EN); - val |= priv->phy_int_gpio_mask; - writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_FALL_EN); - - /* Enable PHY interrupt by setting the priority level */ - val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0); - val |= priv->phy_int_gpio_mask; - writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0); - spin_unlock_irqrestore(&priv->gpio_lock, flags); -} - -static void mlxbf_gige_gpio_disable(struct mlxbf_gige *priv) -{ - unsigned long flags; - u32 val; - - spin_lock_irqsave(&priv->gpio_lock, flags); - val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0); - val &= ~priv->phy_int_gpio_mask; - writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_EVTEN0); - spin_unlock_irqrestore(&priv->gpio_lock, flags); -} - -static irqreturn_t mlxbf_gige_gpio_handler(int irq, void *ptr) -{ - struct mlxbf_gige *priv; - u32 val; - - priv = ptr; - - /* Check if this interrupt is from PHY device. - * Return if it is not. - */ - val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CAUSE_EVTEN0); - if (!(val & priv->phy_int_gpio_mask)) - return IRQ_NONE; - - /* Clear interrupt when done, otherwise, no further interrupt - * will be triggered. - */ - val = readl(priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE); - val |= priv->phy_int_gpio_mask; - writel(val, priv->gpio_io + MLXBF_GIGE_GPIO_CAUSE_OR_CLRCAUSE); - - generic_handle_irq(priv->phy_irq); - - return IRQ_HANDLED; -} - -static void mlxbf_gige_gpio_mask(struct irq_data *irqd) -{ - struct mlxbf_gige *priv = irq_data_get_irq_chip_data(irqd); - - mlxbf_gige_gpio_disable(priv); -} - -static void mlxbf_gige_gpio_unmask(struct irq_data *irqd) -{ - struct mlxbf_gige *priv = irq_data_get_irq_chip_data(irqd); - - mlxbf_gige_gpio_enable(priv); -} - -static struct irq_chip mlxbf_gige_gpio_chip = { - .name = "mlxbf_gige_phy", - .irq_mask = mlxbf_gige_gpio_mask, - .irq_unmask = mlxbf_gige_gpio_unmask, -}; - -static int mlxbf_gige_gpio_domain_map(struct irq_domain *d, - unsigned int irq, - irq_hw_number_t hwirq) -{ - irq_set_chip_data(irq, d->host_data); - irq_set_chip_and_handler(irq, &mlxbf_gige_gpio_chip, handle_simple_irq); - irq_set_noprobe(irq); - - return 0; -} - -static const struct irq_domain_ops mlxbf_gige_gpio_domain_ops = { - .map = mlxbf_gige_gpio_domain_map, - .xlate = irq_domain_xlate_twocell, -}; - -#ifdef CONFIG_ACPI -static int mlxbf_gige_gpio_resources(struct acpi_resource *ares, - void *data) -{ - struct acpi_resource_gpio *gpio; - u32 *phy_int_gpio = data; - - if (ares->type == ACPI_RESOURCE_TYPE_GPIO) { - gpio = &ares->data.gpio; - *phy_int_gpio = gpio->pin_table[0]; - } - - return 1; -} -#endif - -void mlxbf_gige_gpio_free(struct mlxbf_gige *priv) -{ - irq_dispose_mapping(priv->phy_irq); - irq_domain_remove(priv->irqdomain); -} - -int mlxbf_gige_gpio_init(struct platform_device *pdev, - struct mlxbf_gige *priv) -{ - struct device *dev = &pdev->dev; - struct resource *res; - u32 phy_int_gpio = 0; - int ret; - - LIST_HEAD(resources); - - res = platform_get_resource(pdev, IORESOURCE_MEM, MLXBF_GIGE_RES_GPIO0); - if (!res) - return -ENODEV; - - priv->gpio_io = devm_ioremap(dev, res->start, resource_size(res)); - if (!priv->gpio_io) - return -ENOMEM; - -#ifdef CONFIG_ACPI - ret = acpi_dev_get_resources(ACPI_COMPANION(dev), - &resources, mlxbf_gige_gpio_resources, - &phy_int_gpio); - acpi_dev_free_resource_list(&resources); - if (ret < 0 || !phy_int_gpio) { - dev_err(dev, "Error retrieving the gpio phy pin"); - return -EINVAL; - } -#endif - - priv->phy_int_gpio_mask = BIT(phy_int_gpio); - - mlxbf_gige_gpio_disable(priv); - - priv->hw_phy_irq = platform_get_irq(pdev, MLXBF_GIGE_PHY_INT_N); - - priv->irqdomain = irq_domain_add_simple(NULL, 1, 0, - &mlxbf_gige_gpio_domain_ops, - priv); - if (!priv->irqdomain) { - dev_err(dev, "Failed to add IRQ domain\n"); - return -ENOMEM; - } - - priv->phy_irq = irq_create_mapping(priv->irqdomain, 0); - if (!priv->phy_irq) { - irq_domain_remove(priv->irqdomain); - priv->irqdomain = NULL; - dev_err(dev, "Error mapping PHY IRQ\n"); - return -EINVAL; - } - - ret = devm_request_irq(dev, priv->hw_phy_irq, mlxbf_gige_gpio_handler, - IRQF_ONESHOT | IRQF_SHARED, "mlxbf_gige_phy", priv); - if (ret) { - dev_err(dev, "Failed to request PHY IRQ"); - mlxbf_gige_gpio_free(priv); - return ret; - } - - return ret; -} diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c index b990782c1eb1..66ef0090755e 100644 --- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c +++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c @@ -280,8 +280,8 @@ static int mlxbf_gige_probe(struct platform_device *pdev) void __iomem *llu_base; void __iomem *plu_base; void __iomem *base; + int addr, phy_irq; u64 control; - int addr; int err; base = devm_platform_ioremap_resource(pdev, MLXBF_GIGE_RES_MAC); @@ -316,20 +316,12 @@ static int mlxbf_gige_probe(struct platform_device *pdev) priv->pdev = pdev; spin_lock_init(&priv->lock); - spin_lock_init(&priv->gpio_lock); /* Attach MDIO device */ err = mlxbf_gige_mdio_probe(pdev, priv); if (err) return err; - err = mlxbf_gige_gpio_init(pdev, priv); - if (err) { - dev_err(&pdev->dev, "PHY IRQ initialization failed\n"); - mlxbf_gige_mdio_remove(priv); - return -ENODEV; - } - priv->base = base; priv->llu_base = llu_base; priv->plu_base = plu_base; @@ -350,6 +342,12 @@ static int mlxbf_gige_probe(struct platform_device *pdev) priv->rx_irq = platform_get_irq(pdev, MLXBF_GIGE_RECEIVE_PKT_INTR_IDX); priv->llu_plu_irq = platform_get_irq(pdev, MLXBF_GIGE_LLU_PLU_INTR_IDX); + phy_irq = acpi_dev_gpio_irq_get_by(ACPI_COMPANION(&pdev->dev), "phy-gpios", 0); + if (phy_irq < 0) { + dev_err(&pdev->dev, "Error getting PHY irq. Use polling instead"); + phy_irq = PHY_POLL; + } + phydev = phy_find_first(priv->mdiobus); if (!phydev) { err = -ENODEV; @@ -357,8 +355,8 @@ static int mlxbf_gige_probe(struct platform_device *pdev) } addr = phydev->mdio.addr; - priv->mdiobus->irq[addr] = priv->phy_irq; - phydev->irq = priv->phy_irq; + priv->mdiobus->irq[addr] = phy_irq; + phydev->irq = phy_irq; err = phy_connect_direct(netdev, phydev, mlxbf_gige_adjust_link, @@ -394,7 +392,6 @@ static int mlxbf_gige_probe(struct platform_device *pdev) return 0; out: - mlxbf_gige_gpio_free(priv); mlxbf_gige_mdio_remove(priv); return err; } @@ -405,7 +402,6 @@ static int mlxbf_gige_remove(struct platform_device *pdev) unregister_netdev(priv->netdev); phy_disconnect(priv->netdev->phydev); - mlxbf_gige_gpio_free(priv); mlxbf_gige_mdio_remove(priv); platform_set_drvdata(pdev, NULL); diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c index fcace73eae40..a15c95a10bae 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/pci.c +++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c @@ -1875,7 +1875,7 @@ static void mlxsw_pci_cmd_fini(struct mlxsw_pci *mlxsw_pci) static int mlxsw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { - const char *driver_name = pdev->driver->name; + const char *driver_name = dev_driver_string(&pdev->dev); struct mlxsw_pci *mlxsw_pci; int err; diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c index 0685ece1f155..1de076f55740 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c @@ -202,7 +202,8 @@ nfp_get_drvinfo(struct nfp_app *app, struct pci_dev *pdev, { char nsp_version[ETHTOOL_FWVERS_LEN] = {}; - strlcpy(drvinfo->driver, pdev->driver->name, sizeof(drvinfo->driver)); + strlcpy(drvinfo->driver, dev_driver_string(&pdev->dev), + sizeof(drvinfo->driver)); nfp_net_get_nspinfo(app, nsp_version); snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), "%s %s %s %s", vnic_version, nsp_version, diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c index 7f3e84b8622d..23b668de4640 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c +++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c @@ -19,6 +19,7 @@ #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/string.h> +#include <net/addrconf.h> #include "qed.h" #include "qed_cxt.h" #include "qed_hsi.h" @@ -410,18 +411,6 @@ static void qed_rdma_free(struct qed_hwfn *p_hwfn) qed_rdma_resc_free(p_hwfn); } -static void qed_rdma_get_guid(struct qed_hwfn *p_hwfn, u8 *guid) -{ - guid[0] = p_hwfn->hw_info.hw_mac_addr[0] ^ 2; - guid[1] = p_hwfn->hw_info.hw_mac_addr[1]; - guid[2] = p_hwfn->hw_info.hw_mac_addr[2]; - guid[3] = 0xff; - guid[4] = 0xfe; - guid[5] = p_hwfn->hw_info.hw_mac_addr[3]; - guid[6] = p_hwfn->hw_info.hw_mac_addr[4]; - guid[7] = p_hwfn->hw_info.hw_mac_addr[5]; -} - static void qed_rdma_init_events(struct qed_hwfn *p_hwfn, struct qed_rdma_start_in_params *params) { @@ -449,7 +438,9 @@ static void qed_rdma_init_devinfo(struct qed_hwfn *p_hwfn, dev->fw_ver = (FW_MAJOR_VERSION << 24) | (FW_MINOR_VERSION << 16) | (FW_REVISION_VERSION << 8) | (FW_ENGINEERING_VERSION); - qed_rdma_get_guid(p_hwfn, (u8 *)&dev->sys_image_guid); + addrconf_addr_eui48((u8 *)&dev->sys_image_guid, + p_hwfn->hw_info.hw_mac_addr); + dev->node_guid = dev->sys_image_guid; dev->max_sge = min_t(u32, RDMA_MAX_SGE_PER_SQ_WQE, diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index fb0a3825edd0..bfdf89e54752 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -734,7 +734,7 @@ static int sixpack_ioctl(struct tty_struct *tty, struct file *file, break; } default: - err = tty_mode_ioctl(tty, file, cmd, arg); + err = tty_mode_ioctl(tty, cmd, arg); } sp_put(sp); diff --git a/drivers/net/hyperv/hyperv_net.h b/drivers/net/hyperv/hyperv_net.h index bc48855dff10..315278a7cf88 100644 --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -1075,14 +1075,15 @@ struct netvsc_device { /* Receive buffer allocated by us but manages by NetVSP */ void *recv_buf; u32 recv_buf_size; /* allocated bytes */ - u32 recv_buf_gpadl_handle; + struct vmbus_gpadl recv_buf_gpadl_handle; u32 recv_section_cnt; u32 recv_section_size; u32 recv_completion_cnt; /* Send buffer allocated by us */ void *send_buf; - u32 send_buf_gpadl_handle; + u32 send_buf_size; + struct vmbus_gpadl send_buf_gpadl_handle; u32 send_section_cnt; u32 send_section_size; unsigned long *send_section_map; diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 7bd935412853..396bc1c204e6 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -278,9 +278,9 @@ static void netvsc_teardown_recv_gpadl(struct hv_device *device, { int ret; - if (net_device->recv_buf_gpadl_handle) { + if (net_device->recv_buf_gpadl_handle.gpadl_handle) { ret = vmbus_teardown_gpadl(device->channel, - net_device->recv_buf_gpadl_handle); + &net_device->recv_buf_gpadl_handle); /* If we failed here, we might as well return and have a leak * rather than continue and a bugchk @@ -290,7 +290,6 @@ static void netvsc_teardown_recv_gpadl(struct hv_device *device, "unable to teardown receive buffer's gpadl\n"); return; } - net_device->recv_buf_gpadl_handle = 0; } } @@ -300,9 +299,9 @@ static void netvsc_teardown_send_gpadl(struct hv_device *device, { int ret; - if (net_device->send_buf_gpadl_handle) { + if (net_device->send_buf_gpadl_handle.gpadl_handle) { ret = vmbus_teardown_gpadl(device->channel, - net_device->send_buf_gpadl_handle); + &net_device->send_buf_gpadl_handle); /* If we failed here, we might as well return and have a leak * rather than continue and a bugchk @@ -312,7 +311,6 @@ static void netvsc_teardown_send_gpadl(struct hv_device *device, "unable to teardown send buffer's gpadl\n"); return; } - net_device->send_buf_gpadl_handle = 0; } } @@ -380,7 +378,7 @@ static int netvsc_init_buf(struct hv_device *device, memset(init_packet, 0, sizeof(struct nvsp_message)); init_packet->hdr.msg_type = NVSP_MSG1_TYPE_SEND_RECV_BUF; init_packet->msg.v1_msg.send_recv_buf. - gpadl_handle = net_device->recv_buf_gpadl_handle; + gpadl_handle = net_device->recv_buf_gpadl_handle.gpadl_handle; init_packet->msg.v1_msg. send_recv_buf.id = NETVSC_RECEIVE_BUFFER_ID; @@ -463,6 +461,7 @@ static int netvsc_init_buf(struct hv_device *device, ret = -ENOMEM; goto cleanup; } + net_device->send_buf_size = buf_size; /* Establish the gpadl handle for this buffer on this * channel. Note: This call uses the vmbus connection rather @@ -482,7 +481,7 @@ static int netvsc_init_buf(struct hv_device *device, memset(init_packet, 0, sizeof(struct nvsp_message)); init_packet->hdr.msg_type = NVSP_MSG1_TYPE_SEND_SEND_BUF; init_packet->msg.v1_msg.send_send_buf.gpadl_handle = - net_device->send_buf_gpadl_handle; + net_device->send_buf_gpadl_handle.gpadl_handle; init_packet->msg.v1_msg.send_send_buf.id = NETVSC_SEND_BUFFER_ID; trace_nvsp_send(ndev, init_packet); diff --git a/drivers/net/ppp/ppp_async.c b/drivers/net/ppp/ppp_async.c index 29a93d6bfe37..f4429b93a9c8 100644 --- a/drivers/net/ppp/ppp_async.c +++ b/drivers/net/ppp/ppp_async.c @@ -247,10 +247,9 @@ ppp_asynctty_close(struct tty_struct *tty) * Wait for I/O to driver to complete and unregister PPP channel. * This is already done by the close routine, so just call that. */ -static int ppp_asynctty_hangup(struct tty_struct *tty) +static void ppp_asynctty_hangup(struct tty_struct *tty) { ppp_asynctty_close(tty); - return 0; } /* @@ -311,7 +310,7 @@ ppp_asynctty_ioctl(struct tty_struct *tty, struct file *file, /* flush our buffers and the serial port's buffer */ if (arg == TCIOFLUSH || arg == TCOFLUSH) ppp_async_flush_output(ap); - err = n_tty_ioctl_helper(tty, file, cmd, arg); + err = n_tty_ioctl_helper(tty, cmd, arg); break; case FIONREAD: @@ -323,7 +322,7 @@ ppp_asynctty_ioctl(struct tty_struct *tty, struct file *file, default: /* Try the various mode ioctls */ - err = tty_mode_ioctl(tty, file, cmd, arg); + err = tty_mode_ioctl(tty, cmd, arg); } ap_put(ap); diff --git a/drivers/net/ppp/ppp_synctty.c b/drivers/net/ppp/ppp_synctty.c index af3e048695b6..b3a71b409a80 100644 --- a/drivers/net/ppp/ppp_synctty.c +++ b/drivers/net/ppp/ppp_synctty.c @@ -245,10 +245,9 @@ ppp_sync_close(struct tty_struct *tty) * Wait for I/O to driver to complete and unregister PPP channel. * This is already done by the close routine, so just call that. */ -static int ppp_sync_hangup(struct tty_struct *tty) +static void ppp_sync_hangup(struct tty_struct *tty) { ppp_sync_close(tty); - return 0; } /* @@ -304,7 +303,7 @@ ppp_synctty_ioctl(struct tty_struct *tty, struct file *file, /* flush our buffers and the serial port's buffer */ if (arg == TCIOFLUSH || arg == TCOFLUSH) ppp_sync_flush_output(ap); - err = n_tty_ioctl_helper(tty, file, cmd, arg); + err = n_tty_ioctl_helper(tty, cmd, arg); break; case FIONREAD: @@ -315,7 +314,7 @@ ppp_synctty_ioctl(struct tty_struct *tty, struct file *file, break; default: - err = tty_mode_ioctl(tty, file, cmd, arg); + err = tty_mode_ioctl(tty, cmd, arg); break; } diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index 5435b5689ce6..9f3b4c1aa5ce 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -907,10 +907,9 @@ static void slip_close(struct tty_struct *tty) /* This will complete via sl_free_netdev */ } -static int slip_hangup(struct tty_struct *tty) +static void slip_hangup(struct tty_struct *tty) { slip_close(tty); - return 0; } /************************************************************************ * STANDARD SLIP ENCAPSULATION * @@ -1174,7 +1173,7 @@ static int slip_ioctl(struct tty_struct *tty, struct file *file, /* VSV changes end */ #endif default: - return tty_mode_ioctl(tty, file, cmd, arg); + return tty_mode_ioctl(tty, cmd, arg); } } diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index cc79343cd220..1771d6e5224f 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -408,12 +408,13 @@ static struct sk_buff *page_to_skb(struct virtnet_info *vi, * add_recvbuf_mergeable() + get_mergeable_buf_len() */ truesize = headroom ? PAGE_SIZE : truesize; - tailroom = truesize - len - headroom - (hdr_padded_len - hdr_len); + tailroom = truesize - headroom; buf = p - headroom; len -= hdr_len; offset += hdr_padded_len; p += hdr_padded_len; + tailroom -= hdr_padded_len + len; shinfo_size = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); @@ -3422,6 +3423,7 @@ static struct virtio_driver virtio_net_driver = { .feature_table_size = ARRAY_SIZE(features), .feature_table_legacy = features_legacy, .feature_table_size_legacy = ARRAY_SIZE(features_legacy), + .suppress_used_validation = true, .driver.name = KBUILD_MODNAME, .driver.owner = THIS_MODULE, .id_table = id_table, |