summaryrefslogtreecommitdiff
path: root/drivers/pci/controller
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/controller')
-rw-r--r--drivers/pci/controller/dwc/pcie-tegra194.c18
-rw-r--r--drivers/pci/controller/pci-aardvark.c64
-rw-r--r--drivers/pci/controller/pci-xgene.c6
-rw-r--r--drivers/pci/controller/pcie-iproc.c18
4 files changed, 53 insertions, 53 deletions
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 4bf7b433417a..886354342ef1 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -183,11 +183,11 @@
#define GEN3_EQ_CONTROL_OFF_FB_MODE_MASK GENMASK(3, 0)
#define PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT 0x8D0
-#define AMBA_ERROR_RESPONSE_CRS_SHIFT 3
-#define AMBA_ERROR_RESPONSE_CRS_MASK GENMASK(1, 0)
-#define AMBA_ERROR_RESPONSE_CRS_OKAY 0
-#define AMBA_ERROR_RESPONSE_CRS_OKAY_FFFFFFFF 1
-#define AMBA_ERROR_RESPONSE_CRS_OKAY_FFFF0001 2
+#define AMBA_ERROR_RESPONSE_RRS_SHIFT 3
+#define AMBA_ERROR_RESPONSE_RRS_MASK GENMASK(1, 0)
+#define AMBA_ERROR_RESPONSE_RRS_OKAY 0
+#define AMBA_ERROR_RESPONSE_RRS_OKAY_FFFFFFFF 1
+#define AMBA_ERROR_RESPONSE_RRS_OKAY_FFFF0001 2
#define MSIX_ADDR_MATCH_LOW_OFF 0x940
#define MSIX_ADDR_MATCH_LOW_OFF_EN BIT(0)
@@ -907,11 +907,11 @@ static int tegra_pcie_dw_host_init(struct dw_pcie_rp *pp)
dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0);
- /* Enable as 0xFFFF0001 response for CRS */
+ /* Enable as 0xFFFF0001 response for RRS */
val = dw_pcie_readl_dbi(pci, PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT);
- val &= ~(AMBA_ERROR_RESPONSE_CRS_MASK << AMBA_ERROR_RESPONSE_CRS_SHIFT);
- val |= (AMBA_ERROR_RESPONSE_CRS_OKAY_FFFF0001 <<
- AMBA_ERROR_RESPONSE_CRS_SHIFT);
+ val &= ~(AMBA_ERROR_RESPONSE_RRS_MASK << AMBA_ERROR_RESPONSE_RRS_SHIFT);
+ val |= (AMBA_ERROR_RESPONSE_RRS_OKAY_FFFF0001 <<
+ AMBA_ERROR_RESPONSE_RRS_SHIFT);
dw_pcie_writel_dbi(pci, PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT, val);
/* Clear Slot Clock Configuration bit if SRNS configuration */
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index e66594558ce2..afccae3bfbc6 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -50,7 +50,7 @@
#define PIO_COMPLETION_STATUS_MASK GENMASK(9, 7)
#define PIO_COMPLETION_STATUS_OK 0
#define PIO_COMPLETION_STATUS_UR 1
-#define PIO_COMPLETION_STATUS_CRS 2
+#define PIO_COMPLETION_STATUS_RRS 2
#define PIO_COMPLETION_STATUS_CA 4
#define PIO_NON_POSTED_REQ BIT(10)
#define PIO_ERR_STATUS BIT(11)
@@ -262,7 +262,7 @@ enum {
#define MSI_IRQ_NUM 32
-#define CFG_RD_CRS_VAL 0xffff0001
+#define CFG_RD_RRS_VAL 0xffff0001
struct advk_pcie {
struct platform_device *pdev;
@@ -649,7 +649,7 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
advk_pcie_train_link(pcie);
}
-static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u32 *val)
+static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_rrs, u32 *val)
{
struct device *dev = &pcie->pdev->dev;
u32 reg;
@@ -669,7 +669,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
* 2) value Unsupported Request(1) of COMPLETION_STATUS(bit9:7) only
* means a PIO write error, and for PIO read it is successful with
* a read value of 0xFFFFFFFF.
- * 3) value Completion Retry Status(CRS) of COMPLETION_STATUS(bit9:7)
+ * 3) value Config Request Retry Status(RRS) of COMPLETION_STATUS(bit9:7)
* only means a PIO write error, and for PIO read it is successful
* with a read value of 0xFFFF0001.
* 4) value Completer Abort (CA) of COMPLETION_STATUS(bit9:7) means
@@ -694,10 +694,10 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
strcomp_status = "UR";
ret = -EOPNOTSUPP;
break;
- case PIO_COMPLETION_STATUS_CRS:
- if (allow_crs && val) {
- /* PCIe r4.0, sec 2.3.2, says:
- * If CRS Software Visibility is enabled:
+ case PIO_COMPLETION_STATUS_RRS:
+ if (allow_rrs && val) {
+ /* PCIe r6.0, sec 2.3.2, says:
+ * If Configuration RRS Software Visibility is enabled:
* For a Configuration Read Request that includes both
* bytes of the Vendor ID field of a device Function's
* Configuration Space Header, the Root Complex must
@@ -706,22 +706,22 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
* all '1's for any additional bytes included in the
* request.
*
- * So CRS in this case is not an error status.
+ * So RRS in this case is not an error status.
*/
- *val = CFG_RD_CRS_VAL;
+ *val = CFG_RD_RRS_VAL;
strcomp_status = NULL;
ret = 0;
break;
}
- /* PCIe r4.0, sec 2.3.2, says:
- * If CRS Software Visibility is not enabled, the Root Complex
+ /* PCIe r6.0, sec 2.3.2, says:
+ * If RRS Software Visibility is not enabled, the Root Complex
* must re-issue the Configuration Request as a new Request.
- * If CRS Software Visibility is enabled: For a Configuration
+ * If RRS Software Visibility is enabled: For a Configuration
* Write Request or for any other Configuration Read Request,
* the Root Complex must re-issue the Configuration Request as
* a new Request.
* A Root Complex implementation may choose to limit the number
- * of Configuration Request/CRS Completion Status loops before
+ * of Configuration Request/RRS Completion Status loops before
* determining that something is wrong with the target of the
* Request and taking appropriate action, e.g., complete the
* Request to the host as a failed transaction.
@@ -729,7 +729,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
* So return -EAGAIN and caller (pci-aardvark.c driver) will
* re-issue request again up to the PIO_RETRY_CNT retries.
*/
- strcomp_status = "CRS";
+ strcomp_status = "RRS";
ret = -EAGAIN;
break;
case PIO_COMPLETION_STATUS_CA:
@@ -920,8 +920,8 @@ advk_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
case PCI_EXP_RTCTL: {
u16 rootctl = le16_to_cpu(bridge->pcie_conf.rootctl);
- /* Only emulation of PMEIE and CRSSVE bits is provided */
- rootctl &= PCI_EXP_RTCTL_PMEIE | PCI_EXP_RTCTL_CRSSVE;
+ /* Only emulation of PMEIE and RRS_SVE bits is provided */
+ rootctl &= PCI_EXP_RTCTL_PMEIE | PCI_EXP_RTCTL_RRS_SVE;
bridge->pcie_conf.rootctl = cpu_to_le16(rootctl);
break;
}
@@ -1075,7 +1075,7 @@ static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
bridge->pcie_conf.slotsta = cpu_to_le16(PCI_EXP_SLTSTA_PDS);
/* Indicates supports for Completion Retry Status */
- bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
+ bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_RRS_SV);
bridge->subsystem_vendor_id = advk_readl(pcie, PCIE_CORE_SSDEV_ID_REG) & 0xffff;
bridge->subsystem_id = advk_readl(pcie, PCIE_CORE_SSDEV_ID_REG) >> 16;
@@ -1141,7 +1141,7 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
{
struct advk_pcie *pcie = bus->sysdata;
int retry_count;
- bool allow_crs;
+ bool allow_rrs;
u32 reg;
int ret;
@@ -1153,16 +1153,16 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
size, val);
/*
- * Completion Retry Status is possible to return only when reading
- * both bytes from PCI_VENDOR_ID at once and CRSSVE flag on Root
- * Port is enabled.
+ * Configuration Request Retry Status (RRS) is possible to return
+ * only when reading both bytes from PCI_VENDOR_ID at once and
+ * RRS_SVE flag on Root Port is enabled.
*/
- allow_crs = (where == PCI_VENDOR_ID) && (size >= 2) &&
+ allow_rrs = (where == PCI_VENDOR_ID) && (size >= 2) &&
(le16_to_cpu(pcie->bridge.pcie_conf.rootctl) &
- PCI_EXP_RTCTL_CRSSVE);
+ PCI_EXP_RTCTL_RRS_SVE);
if (advk_pcie_pio_is_running(pcie))
- goto try_crs;
+ goto try_rrs;
/* Program the control register */
reg = advk_readl(pcie, PIO_CTRL);
@@ -1189,12 +1189,12 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
ret = advk_pcie_wait_pio(pcie);
if (ret < 0)
- goto try_crs;
+ goto try_rrs;
retry_count += ret;
/* Check PIO status and get the read result */
- ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
+ ret = advk_pcie_check_pio_status(pcie, allow_rrs, val);
} while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT);
if (ret < 0)
@@ -1207,13 +1207,13 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
return PCIBIOS_SUCCESSFUL;
-try_crs:
+try_rrs:
/*
- * If it is possible, return Completion Retry Status so that caller
- * tries to issue the request again instead of failing.
+ * If it is possible, return Configuration Request Retry Status so
+ * that caller tries to issue the request again instead of failing.
*/
- if (allow_crs) {
- *val = CFG_RD_CRS_VAL;
+ if (allow_rrs) {
+ *val = CFG_RD_RRS_VAL;
return PCIBIOS_SUCCESSFUL;
}
diff --git a/drivers/pci/controller/pci-xgene.c b/drivers/pci/controller/pci-xgene.c
index 8e457fa450a2..1e2ebbfa36d1 100644
--- a/drivers/pci/controller/pci-xgene.c
+++ b/drivers/pci/controller/pci-xgene.c
@@ -171,17 +171,17 @@ static int xgene_pcie_config_read32(struct pci_bus *bus, unsigned int devfn,
/*
* The v1 controller has a bug in its Configuration Request Retry
- * Status (CRS) logic: when CRS Software Visibility is enabled and
+ * Status (RRS) logic: when RRS Software Visibility is enabled and
* we read the Vendor and Device ID of a non-existent device, the
* controller fabricates return data of 0xFFFF0001 ("device exists
* but is not ready") instead of 0xFFFFFFFF (PCI_ERROR_RESPONSE)
* ("device does not exist"). This causes the PCI core to retry
* the read until it times out. Avoid this by not claiming to
- * support CRS SV.
+ * support RRS SV.
*/
if (pci_is_root_bus(bus) && (port->version == XGENE_PCIE_IP_VER_1) &&
((where & ~0x3) == XGENE_V1_PCI_EXP_CAP + PCI_EXP_RTCTL))
- *val &= ~(PCI_EXP_RTCAP_CRSVIS << 16);
+ *val &= ~(PCI_EXP_RTCAP_RRS_SV << 16);
if (size <= 2)
*val = (*val >> (8 * (where & 3))) & ((1 << (size * 8)) - 1);
diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
index 97f739a2c9f8..22134e95574b 100644
--- a/drivers/pci/controller/pcie-iproc.c
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -54,7 +54,7 @@
#define CFG_RD_SUCCESS 0
#define CFG_RD_UR 1
-#define CFG_RD_CRS 2
+#define CFG_RD_RRS 2
#define CFG_RD_CA 3
#define CFG_RETRY_STATUS 0xffff0001
#define CFG_RETRY_STATUS_TIMEOUT_US 500000 /* 500 milliseconds */
@@ -485,31 +485,31 @@ static unsigned int iproc_pcie_cfg_retry(struct iproc_pcie *pcie,
u32 status;
/*
- * As per PCIe spec r3.1, sec 2.3.2, CRS Software Visibility only
+ * As per PCIe r6.0, sec 2.3.2, Config RRS Software Visibility only
* affects config reads of the Vendor ID. For config writes or any
* other config reads, the Root may automatically reissue the
* configuration request again as a new request.
*
* For config reads, this hardware returns CFG_RETRY_STATUS data
- * when it receives a CRS completion, regardless of the address of
- * the read or the CRS Software Visibility Enable bit. As a
+ * when it receives a RRS completion, regardless of the address of
+ * the read or the RRS Software Visibility Enable bit. As a
* partial workaround for this, we retry in software any read that
* returns CFG_RETRY_STATUS.
*
* Note that a non-Vendor ID config register may have a value of
* CFG_RETRY_STATUS. If we read that, we can't distinguish it from
- * a CRS completion, so we will incorrectly retry the read and
+ * a RRS completion, so we will incorrectly retry the read and
* eventually return the wrong data (0xffffffff).
*/
data = readl(cfg_data_p);
while (data == CFG_RETRY_STATUS && timeout--) {
/*
- * CRS state is set in CFG_RD status register
+ * RRS state is set in CFG_RD status register
* This will handle the case where CFG_RETRY_STATUS is
* valid config data.
*/
status = iproc_pcie_read_reg(pcie, IPROC_PCIE_CFG_RD_STATUS);
- if (status != CFG_RD_CRS)
+ if (status != CFG_RD_RRS)
return data;
udelay(1);
@@ -556,8 +556,8 @@ static void iproc_pcie_fix_cap(struct iproc_pcie *pcie, int where, u32 *val)
break;
case IPROC_PCI_EXP_CAP + PCI_EXP_RTCTL:
- /* Don't advertise CRS SV support */
- *val &= ~(PCI_EXP_RTCAP_CRSVIS << 16);
+ /* Don't advertise RRS SV support */
+ *val &= ~(PCI_EXP_RTCAP_RRS_SV << 16);
break;
default:
generated by cgit (git 2.34.1) at 2025-04-04 06:02:03 +0000