summaryrefslogtreecommitdiff
path: root/drivers/pci/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/pci.c')
-rw-r--r--drivers/pci/pci.c29
1 files changed, 10 insertions, 19 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 29ed5ec1ac27..1b27b5af3d55 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1025,10 +1025,15 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
if (state == PCI_D0) {
pci_platform_power_transition(dev, PCI_D0);
/*
- * Mandatory power management transition delays are
- * handled in the PCIe portdrv resume hooks.
+ * Mandatory power management transition delays, see
+ * PCI Express Base Specification Revision 2.0 Section
+ * 6.6.1: Conventional Reset. Do not delay for
+ * devices powered on/off by corresponding bridge,
+ * because have already delayed for the bridge.
*/
if (dev->runtime_d3cold) {
+ if (dev->d3cold_delay && !dev->imm_ready)
+ msleep(dev->d3cold_delay);
/*
* When powering on a bridge from D3cold, the
* whole hierarchy may be powered on into
@@ -4602,16 +4607,14 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
return pci_dev_wait(dev, "PM D3->D0", PCIE_RESET_READY_POLL_MS);
}
-
/**
- * pcie_wait_for_link_delay - Wait until link is active or inactive
+ * pcie_wait_for_link - Wait until link is active or inactive
* @pdev: Bridge device
* @active: waiting for active or inactive?
- * @delay: Delay to wait after link has become active (in ms)
*
* Use this to wait till link becomes active or inactive.
*/
-bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay)
+bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
{
int timeout = 1000;
bool ret;
@@ -4648,25 +4651,13 @@ bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay)
timeout -= 10;
}
if (active && ret)
- msleep(delay);
+ msleep(100);
else if (ret != active)
pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
active ? "set" : "cleared");
return ret == active;
}
-/**
- * pcie_wait_for_link - Wait until link is active or inactive
- * @pdev: Bridge device
- * @active: waiting for active or inactive?
- *
- * Use this to wait till link becomes active or inactive.
- */
-bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
-{
- return pcie_wait_for_link_delay(pdev, active, 100);
-}
-
void pci_reset_secondary_bus(struct pci_dev *dev)
{
u16 ctrl;