diff options
Diffstat (limited to 'drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c')
| -rw-r--r-- | drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c | 163 |
1 files changed, 157 insertions, 6 deletions
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c index 0bd9ccc43323..ee49cbdb55bb 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c @@ -12,10 +12,33 @@ #include <linux/soc/brcmstb/brcmstb.h> #include "phy-brcm-usb-init.h" +#define PHY_LOCK_TIMEOUT_MS 200 + +/* Register definitions for syscon piarbctl registers */ +#define PIARBCTL_CAM 0x00 +#define PIARBCTL_SPLITTER 0x04 +#define PIARBCTL_MISC 0x08 +#define PIARBCTL_MISC_SECURE_MASK 0x80000000 +#define PIARBCTL_MISC_USB_SELECT_MASK 0x40000000 +#define PIARBCTL_MISC_USB_4G_SDRAM_MASK 0x20000000 +#define PIARBCTL_MISC_USB_PRIORITY_MASK 0x000f0000 +#define PIARBCTL_MISC_USB_MEM_PAGE_MASK 0x0000f000 +#define PIARBCTL_MISC_CAM1_MEM_PAGE_MASK 0x00000f00 +#define PIARBCTL_MISC_CAM0_MEM_PAGE_MASK 0x000000f0 +#define PIARBCTL_MISC_SATA_PRIORITY_MASK 0x0000000f +#define PIARBCTL_USB_M_ASB_CTRL 0x10 + +#define PIARBCTL_MISC_USB_ONLY_MASK \ + (PIARBCTL_MISC_USB_SELECT_MASK | \ + PIARBCTL_MISC_USB_4G_SDRAM_MASK | \ + PIARBCTL_MISC_USB_PRIORITY_MASK | \ + PIARBCTL_MISC_USB_MEM_PAGE_MASK) + /* Register definitions for the USB CTRL block */ #define USB_CTRL_SETUP 0x00 #define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK 0x02000000 #define USB_CTRL_SETUP_SCB2_EN_MASK 0x00008000 +#define USB_CTRL_SETUP_tca_drv_sel_MASK 0x01000000 #define USB_CTRL_SETUP_SCB1_EN_MASK 0x00004000 #define USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK 0x00000200 #define USB_CTRL_SETUP_IPP_MASK 0x00000020 @@ -29,11 +52,73 @@ #define USB_CTRL_USB_DEVICE_CTL1 0x10 #define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK 0x00000003 +/* Register definitions for the USB_PHY block in 7211b0 */ +#define USB_PHY_PLL_LDO_CTL 0x08 +#define USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK 0x00000004 +#define USB_PHY_UTMI_CTL_1 0x04 +#define USB_PHY_UTMI_CTL_1_PHY_MODE_MASK 0x0000000c +#define USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT 2 +#define USB_PHY_STATUS 0x20 +#define USB_PHY_STATUS_pll_lock_MASK 0x00000001 + +/* Register definitions for the MDIO registers in the DWC2 block of + * the 7211b0. + * NOTE: The PHY's MDIO registers are only accessible through the + * legacy DesignWare USB controller even though it's not being used. + */ +#define USB_GMDIOCSR 0 +#define USB_GMDIOGEN 4 + + +static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params, + uint8_t addr, uint16_t data) +{ + void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO]; + + addr &= 0x1f; /* 5-bit address */ + brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x59020000 | (addr << 18) | data, + usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; +} + +static uint16_t __maybe_unused usb_mdio_read_7211b0( + struct brcm_usb_init_params *params, uint8_t addr) +{ + void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO]; + + addr &= 0x1f; /* 5-bit address */ + brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x69020000 | (addr << 18), usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN); + while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31)) + ; + return brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & 0xffff; +} + +static void usb2_eye_fix_7211b0(struct brcm_usb_init_params *params) +{ + /* select bank */ + usb_mdio_write_7211b0(params, 0x1f, 0x80a0); + + /* Set the eye */ + usb_mdio_write_7211b0(params, 0x0a, 0xc6a0); +} static void xhci_soft_reset(struct brcm_usb_init_params *params, int on_off) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; /* Assert reset */ if (on_off) @@ -45,7 +130,7 @@ static void xhci_soft_reset(struct brcm_usb_init_params *params, static void usb_init_ipp(struct brcm_usb_init_params *params) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; u32 reg; u32 orig_reg; @@ -72,10 +157,18 @@ static void usb_init_ipp(struct brcm_usb_init_params *params) msleep(50); } +static void syscon_piarbctl_init(struct regmap *rmap) +{ + /* Switch from legacy USB OTG controller to new STB USB controller */ + regmap_update_bits(rmap, PIARBCTL_MISC, PIARBCTL_MISC_USB_ONLY_MASK, + PIARBCTL_MISC_USB_SELECT_MASK | + PIARBCTL_MISC_USB_4G_SDRAM_MASK); +} + static void usb_init_common(struct brcm_usb_init_params *params) { u32 reg; - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; pr_debug("%s\n", __func__); @@ -100,6 +193,45 @@ static void usb_init_common(struct brcm_usb_init_params *params) } } +static void usb_init_common_7211b0(struct brcm_usb_init_params *params) +{ + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; + void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY]; + int timeout_ms = PHY_LOCK_TIMEOUT_MS; + u32 reg; + + if (params->syscon_piarbctl) + syscon_piarbctl_init(params->syscon_piarbctl); + + /* Init the PHY */ + reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_LDO_CTL); + reg |= USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK; + brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL); + + /* wait for lock */ + while (timeout_ms-- > 0) { + reg = brcm_usb_readl(usb_phy + USB_PHY_STATUS); + if (reg & USB_PHY_STATUS_pll_lock_MASK) + break; + usleep_range(1000, 2000); + } + + /* Set the PHY_MODE */ + reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1); + reg &= ~USB_PHY_UTMI_CTL_1_PHY_MODE_MASK; + reg |= params->mode << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT; + brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1); + + /* Fix the incorrect default */ + reg = brcm_usb_readl(ctrl + USB_CTRL_SETUP); + reg &= ~USB_CTRL_SETUP_tca_drv_sel_MASK; + brcm_usb_writel(reg, ctrl + USB_CTRL_SETUP); + + usb_init_common(params); + + usb2_eye_fix_7211b0(params); +} + static void usb_init_xhci(struct brcm_usb_init_params *params) { pr_debug("%s\n", __func__); @@ -109,7 +241,7 @@ static void usb_init_xhci(struct brcm_usb_init_params *params) static void usb_uninit_common(struct brcm_usb_init_params *params) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; pr_debug("%s\n", __func__); @@ -127,7 +259,7 @@ static void usb_uninit_xhci(struct brcm_usb_init_params *params) static int usb_get_dual_select(struct brcm_usb_init_params *params) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; u32 reg = 0; pr_debug("%s\n", __func__); @@ -139,7 +271,7 @@ static int usb_get_dual_select(struct brcm_usb_init_params *params) static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode) { - void __iomem *ctrl = params->ctrl_regs; + void __iomem *ctrl = params->regs[BRCM_REGS_CTRL]; u32 reg; pr_debug("%s\n", __func__); @@ -161,6 +293,16 @@ static const struct brcm_usb_init_ops bcm7216_ops = { .set_dual_select = usb_set_dual_select, }; +static const struct brcm_usb_init_ops bcm7211b0_ops = { + .init_ipp = usb_init_ipp, + .init_common = usb_init_common_7211b0, + .init_xhci = usb_init_xhci, + .uninit_common = usb_uninit_common, + .uninit_xhci = usb_uninit_xhci, + .get_dual_select = usb_get_dual_select, + .set_dual_select = usb_set_dual_select, +}; + void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params) { @@ -169,3 +311,12 @@ void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params) params->family_name = "7216"; params->ops = &bcm7216_ops; } + +void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params) +{ + + pr_debug("%s\n", __func__); + + params->family_name = "7211"; + params->ops = &bcm7211b0_ops; +} |