diff options
Diffstat (limited to 'drivers/platform/x86/intel_cht_int33fe.c')
| -rw-r--r-- | drivers/platform/x86/intel_cht_int33fe.c | 114 |
1 files changed, 104 insertions, 10 deletions
diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c index da706e2c4232..380ef7ec094f 100644 --- a/drivers/platform/x86/intel_cht_int33fe.c +++ b/drivers/platform/x86/intel_cht_int33fe.c @@ -24,6 +24,7 @@ #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/module.h> +#include <linux/regulator/consumer.h> #include <linux/slab.h> #define EXPECTED_PTYPE 4 @@ -34,6 +35,42 @@ struct cht_int33fe_data { struct i2c_client *pi3usb30532; }; +/* + * Grrr I severly dislike buggy BIOS-es. At least one BIOS enumerates + * the max17047 both through the INT33FE ACPI device (it is right there + * in the resources table) as well as through a separate MAX17047 device. + * + * These helpers are used to work around this by checking if an i2c-client + * for the max17047 has already been registered. + */ +static int cht_int33fe_check_for_max17047(struct device *dev, void *data) +{ + struct i2c_client **max17047 = data; + struct acpi_device *adev; + const char *hid; + + adev = ACPI_COMPANION(dev); + if (!adev) + return 0; + + hid = acpi_device_hid(adev); + + /* The MAX17047 ACPI node doesn't have an UID, so we don't check that */ + if (strcmp(hid, "MAX17047")) + return 0; + + *max17047 = to_i2c_client(dev); + return 1; +} + +static struct i2c_client *cht_int33fe_find_max17047(void) +{ + struct i2c_client *max17047 = NULL; + + i2c_for_each_dev(&max17047, cht_int33fe_check_for_max17047); + return max17047; +} + static const char * const max17047_suppliers[] = { "bq24190-charger" }; static const struct property_entry max17047_props[] = { @@ -41,14 +78,25 @@ static const struct property_entry max17047_props[] = { { } }; +static const struct property_entry fusb302_props[] = { + PROPERTY_ENTRY_STRING("fcs,extcon-name", "cht_wcove_pwrsrc"), + PROPERTY_ENTRY_U32("fcs,max-sink-microvolt", 12000000), + PROPERTY_ENTRY_U32("fcs,max-sink-microamp", 3000000), + PROPERTY_ENTRY_U32("fcs,max-sink-microwatt", 36000000), + { } +}; + static int cht_int33fe_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct i2c_board_info board_info; struct cht_int33fe_data *data; + struct i2c_client *max17047; + struct regulator *regulator; unsigned long long ptyp; acpi_status status; int fusb302_irq; + int ret; status = acpi_evaluate_integer(ACPI_HANDLE(dev), "PTYP", NULL, &ptyp); if (ACPI_FAILURE(status)) { @@ -63,6 +111,34 @@ static int cht_int33fe_probe(struct i2c_client *client) if (ptyp != EXPECTED_PTYPE) return -ENODEV; + /* Check presence of INT34D3 (hardware-rev 3) expected for ptype == 4 */ + if (!acpi_dev_present("INT34D3", "1", 3)) { + dev_err(dev, "Error PTYPE == %d, but no INT34D3 device\n", + EXPECTED_PTYPE); + return -ENODEV; + } + + /* + * We expect the WC PMIC to be paired with a TI bq24292i charger-IC. + * We check for the bq24292i vbus regulator here, this has 2 purposes: + * 1) The bq24292i allows charging with up to 12V, setting the fusb302's + * max-snk voltage to 12V with another charger-IC is not good. + * 2) For the fusb302 driver to get the bq24292i vbus regulator, the + * regulator-map, which is part of the bq24292i regulator_init_data, + * must be registered before the fusb302 is instantiated, otherwise + * it will end up with a dummy-regulator. + * Note "cht_wc_usb_typec_vbus" comes from the regulator_init_data + * which is defined in i2c-cht-wc.c from where the bq24292i i2c-client + * gets instantiated. We use regulator_get_optional here so that we + * don't end up getting a dummy-regulator ourselves. + */ + regulator = regulator_get_optional(dev, "cht_wc_usb_typec_vbus"); + if (IS_ERR(regulator)) { + ret = PTR_ERR(regulator); + return (ret == -ENODEV) ? -EPROBE_DEFER : ret; + } + regulator_put(regulator); + /* The FUSB302 uses the irq at index 1 and is the only irq user */ fusb302_irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 1); if (fusb302_irq < 0) { @@ -75,16 +151,31 @@ static int cht_int33fe_probe(struct i2c_client *client) if (!data) return -ENOMEM; - memset(&board_info, 0, sizeof(board_info)); - strlcpy(board_info.type, "max17047", I2C_NAME_SIZE); - board_info.properties = max17047_props; - - data->max17047 = i2c_acpi_new_device(dev, 1, &board_info); - if (!data->max17047) - return -EPROBE_DEFER; /* Wait for the i2c-adapter to load */ + /* Work around BIOS bug, see comment on cht_int33fe_find_max17047 */ + max17047 = cht_int33fe_find_max17047(); + if (max17047) { + /* Pre-existing i2c-client for the max17047, add device-props */ + ret = device_add_properties(&max17047->dev, max17047_props); + if (ret) + return ret; + /* And re-probe to get the new device-props applied. */ + ret = device_reprobe(&max17047->dev); + if (ret) + dev_warn(dev, "Reprobing max17047 error: %d\n", ret); + } else { + memset(&board_info, 0, sizeof(board_info)); + strlcpy(board_info.type, "max17047", I2C_NAME_SIZE); + board_info.dev_name = "max17047"; + board_info.properties = max17047_props; + data->max17047 = i2c_acpi_new_device(dev, 1, &board_info); + if (!data->max17047) + return -EPROBE_DEFER; /* Wait for i2c-adapter to load */ + } memset(&board_info, 0, sizeof(board_info)); - strlcpy(board_info.type, "fusb302", I2C_NAME_SIZE); + strlcpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE); + board_info.dev_name = "fusb302"; + board_info.properties = fusb302_props; board_info.irq = fusb302_irq; data->fusb302 = i2c_acpi_new_device(dev, 2, &board_info); @@ -92,6 +183,7 @@ static int cht_int33fe_probe(struct i2c_client *client) goto out_unregister_max17047; memset(&board_info, 0, sizeof(board_info)); + board_info.dev_name = "pi3usb30532"; strlcpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE); data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info); @@ -106,7 +198,8 @@ out_unregister_fusb302: i2c_unregister_device(data->fusb302); out_unregister_max17047: - i2c_unregister_device(data->max17047); + if (data->max17047) + i2c_unregister_device(data->max17047); return -EPROBE_DEFER; /* Wait for the i2c-adapter to load */ } @@ -117,7 +210,8 @@ static int cht_int33fe_remove(struct i2c_client *i2c) i2c_unregister_device(data->pi3usb30532); i2c_unregister_device(data->fusb302); - i2c_unregister_device(data->max17047); + if (data->max17047) + i2c_unregister_device(data->max17047); return 0; } |