diff options
Diffstat (limited to 'drivers/regulator/axp20x-regulator.c')
| -rw-r--r-- | drivers/regulator/axp20x-regulator.c | 57 |
1 files changed, 56 insertions, 1 deletions
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 1d9fa6238aec..e8a895b81c90 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -14,6 +14,7 @@ */ #include <linux/bitops.h> +#include <linux/delay.h> #include <linux/err.h> #include <linux/init.h> #include <linux/mfd/axp20x.h> @@ -23,6 +24,7 @@ #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> #include <linux/regulator/of_regulator.h> #define AXP20X_GPIO0_FUNC_MASK GENMASK(3, 0) @@ -430,6 +432,59 @@ static int axp20x_set_ramp_delay(struct regulator_dev *rdev, int ramp) return regmap_update_bits(axp20x->regmap, reg, mask, cfg); } +static int axp20x_regulator_enable_regmap(struct regulator_dev *rdev) +{ + struct axp20x_dev *axp20x = rdev_get_drvdata(rdev); + const struct regulator_desc *desc = rdev->desc; + + if (!rdev) + return -EINVAL; + + switch (axp20x->variant) { + case AXP209_ID: + if ((desc->id == AXP20X_LDO3) && + rdev->constraints && rdev->constraints->soft_start) { + int v_out; + int ret; + + /* + * On some boards, the LDO3 can be overloaded when + * turning on, causing the entire PMIC to shutdown + * without warning. Turning it on at the minimal voltage + * and then setting the voltage to the requested value + * works reliably. + */ + if (regulator_is_enabled_regmap(rdev)) + break; + + v_out = regulator_get_voltage_sel_regmap(rdev); + if (v_out < 0) + return v_out; + + if (v_out == 0) + break; + + ret = regulator_set_voltage_sel_regmap(rdev, 0x00); + /* + * A small pause is needed between + * setting the voltage and enabling the LDO to give the + * internal state machine time to process the request. + */ + usleep_range(1000, 5000); + ret |= regulator_enable_regmap(rdev); + ret |= regulator_set_voltage_sel_regmap(rdev, v_out); + + return ret; + } + break; + default: + /* No quirks */ + break; + } + + return regulator_enable_regmap(rdev); +}; + static const struct regulator_ops axp20x_ops_fixed = { .list_voltage = regulator_list_voltage_linear, }; @@ -447,7 +502,7 @@ static const struct regulator_ops axp20x_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .list_voltage = regulator_list_voltage_linear, - .enable = regulator_enable_regmap, + .enable = axp20x_regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .set_ramp_delay = axp20x_set_ramp_delay, |