3 files changed, 41 insertions, 3 deletions
diff --git a/drivers/regulator/atc260x-regulator.c b/drivers/regulator/atc260x-regulator.c
index 05147d2c3842..485e58b264c0 100644
--- a/drivers/regulator/atc260x-regulator.c
+++ b/drivers/regulator/atc260x-regulator.c
@@ -292,6 +292,7 @@ enum atc2603c_reg_ids {
 	.bypass_mask = BIT(5), \
 	.active_discharge_reg = ATC2603C_PMU_SWITCH_CTL, \
 	.active_discharge_mask = BIT(1), \
+	.active_discharge_on = BIT(1), \
 	.owner = THIS_MODULE, \
 }
 
diff --git a/drivers/regulator/rtq2134-regulator.c b/drivers/regulator/rtq2134-regulator.c
index f21e3f8b21f2..8e13dea354a2 100644
--- a/drivers/regulator/rtq2134-regulator.c
+++ b/drivers/regulator/rtq2134-regulator.c
@@ -285,6 +285,7 @@ static const unsigned int rtq2134_buck_ramp_delay_table[] = {
 		.enable_mask = RTQ2134_VOUTEN_MASK, \
 		.active_discharge_reg = RTQ2134_REG_BUCK##_id##_CFG0, \
 		.active_discharge_mask = RTQ2134_ACTDISCHG_MASK, \
+		.active_discharge_on = RTQ2134_ACTDISCHG_MASK, \
 		.ramp_reg = RTQ2134_REG_BUCK##_id##_RSPCFG, \
 		.ramp_mask = RTQ2134_RSPUP_MASK, \
 		.ramp_delay_table = rtq2134_buck_ramp_delay_table, \
diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c
index cadea0344486..40befdd9dfa9 100644
--- a/drivers/regulator/wm8994-regulator.c
+++ b/drivers/regulator/wm8994-regulator.c
@@ -82,6 +82,35 @@ static const struct regulator_desc wm8994_ldo_desc[] = {
 		.min_uV = 2400000,
 		.uV_step = 100000,
 		.enable_time = 3000,
+		.off_on_delay = 36000,
+		.owner = THIS_MODULE,
+	},
+	{
+		.name = "LDO2",
+		.id = 2,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = WM8994_LDO2_MAX_SELECTOR + 1,
+		.vsel_reg = WM8994_LDO_2,
+		.vsel_mask = WM8994_LDO2_VSEL_MASK,
+		.ops = &wm8994_ldo2_ops,
+		.enable_time = 3000,
+		.off_on_delay = 36000,
+		.owner = THIS_MODULE,
+	},
+};
+
+static const struct regulator_desc wm8958_ldo_desc[] = {
+	{
+		.name = "LDO1",
+		.id = 1,
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = WM8994_LDO1_MAX_SELECTOR + 1,
+		.vsel_reg = WM8994_LDO_1,
+		.vsel_mask = WM8994_LDO1_VSEL_MASK,
+		.ops = &wm8994_ldo1_ops,
+		.min_uV = 2400000,
+		.uV_step = 100000,
+		.enable_time = 3000,
 		.owner = THIS_MODULE,
 	},
 	{
@@ -172,9 +201,16 @@ static int wm8994_ldo_probe(struct platform_device *pdev)
 	 * regulator core and we need not worry about it on the
 	 * error path.
 	 */
-	ldo->regulator = devm_regulator_register(&pdev->dev,
-						 &wm8994_ldo_desc[id],
-						 &config);
+	if (ldo->wm8994->type == WM8994) {
+		ldo->regulator = devm_regulator_register(&pdev->dev,
+							 &wm8994_ldo_desc[id],
+							 &config);
+	} else {
+		ldo->regulator = devm_regulator_register(&pdev->dev,
+							 &wm8958_ldo_desc[id],
+							 &config);
+	}
+
 	if (IS_ERR(ldo->regulator)) {
 		ret = PTR_ERR(ldo->regulator);
 		dev_err(wm8994->dev, "Failed to register LDO%d: %d\n",