diff options
Diffstat (limited to 'drivers/regulator')
24 files changed, 732 insertions, 142 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 144cbf5b3e5a..c09c2b654536 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -498,6 +498,15 @@ config REGULATOR_MT6311 This driver supports the control of different power rails of device through regulator interface. +config REGULATOR_MT6323 + tristate "MediaTek MT6323 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6323 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_MT6397 tristate "MediaTek MT6397 PMIC" depends on MFD_MT6397 @@ -543,12 +552,12 @@ config REGULATOR_PCF50633 on PCF50633 config REGULATOR_PFUZE100 - tristate "Freescale PFUZE100/PFUZE200 regulator driver" + tristate "Freescale PFUZE100/200/3000 regulator driver" depends on I2C select REGMAP_I2C help Say y here to support the regulators found on the Freescale - PFUZE100/PFUZE200 PMIC. + PFUZE100/200/3000 PMIC. config REGULATOR_PV88060 tristate "Powerventure Semiconductor PV88060 regulator" diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 85a1d44a3939..f3da9eea9ab6 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -65,6 +65,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o +obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c index a1cd0d4f8257..7652477e6a9d 100644 --- a/drivers/regulator/act8865-regulator.c +++ b/drivers/regulator/act8865-regulator.c @@ -395,12 +395,6 @@ static int act8865_pdata_from_dt(struct device *dev, struct act8865_regulator_data *regulator; struct of_regulator_match *matches; - np = of_get_child_by_name(dev->of_node, "regulators"); - if (!np) { - dev_err(dev, "missing 'regulators' subnode in DT\n"); - return -EINVAL; - } - switch (type) { case ACT8600: matches = act8600_matches; @@ -419,6 +413,12 @@ static int act8865_pdata_from_dt(struct device *dev, return -EINVAL; } + np = of_get_child_by_name(dev->of_node, "regulators"); + if (!np) { + dev_err(dev, "missing 'regulators' subnode in DT\n"); + return -EINVAL; + } + matched = of_regulator_match(dev, np, matches, num_matches); of_node_put(np); if (matched <= 0) diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 63cd5e68c864..3a6d0290c54c 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -296,7 +296,7 @@ static int anatop_regulator_probe(struct platform_device *pdev) if (!sreg->sel && !strcmp(sreg->name, "vddpu")) sreg->sel = 22; - if (!sreg->sel) { + if (!sreg->bypass && !sreg->sel) { dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n"); return -EINVAL; } diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 514a5e8fdbab..6d9ac76a772f 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -36,6 +36,8 @@ #define AXP20X_FREQ_DCDC_MASK 0x0f +#define AXP22X_MISC_N_VBUSEN_FUNC BIT(4) + #define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg, \ _vmask, _ereg, _emask, _enable_val, _disable_val) \ [_family##_##_id] = { \ @@ -230,6 +232,73 @@ static const struct regulator_desc axp22x_regulators[] = { AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000), }; +static const struct regulator_desc axp22x_drivevbus_regulator = { + .name = "drivevbus", + .supply_name = "drivevbus", + .of_match = of_match_ptr("drivevbus"), + .regulators_node = of_match_ptr("regulators"), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .enable_reg = AXP20X_VBUS_IPSOUT_MGMT, + .enable_mask = BIT(2), + .ops = &axp20x_ops_sw, +}; + +static const struct regulator_linear_range axp809_dcdc4_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0x0, 0x2f, 20000), + REGULATOR_LINEAR_RANGE(1800000, 0x30, 0x38, 100000), +}; + +static const struct regulator_linear_range axp809_dldo1_ranges[] = { + REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000), + REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000), +}; + +static const struct regulator_desc axp809_regulators[] = { + AXP_DESC(AXP809, DCDC1, "dcdc1", "vin1", 1600, 3400, 100, + AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(1)), + AXP_DESC(AXP809, DCDC2, "dcdc2", "vin2", 600, 1540, 20, + AXP22X_DCDC2_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(2)), + AXP_DESC(AXP809, DCDC3, "dcdc3", "vin3", 600, 1860, 20, + AXP22X_DCDC3_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)), + AXP_DESC_RANGES(AXP809, DCDC4, "dcdc4", "vin4", axp809_dcdc4_ranges, + 57, AXP22X_DCDC4_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, + BIT(4)), + AXP_DESC(AXP809, DCDC5, "dcdc5", "vin5", 1000, 2550, 50, + AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)), + /* secondary switchable output of DCDC1 */ + AXP_DESC_SW(AXP809, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2, + BIT(7)), + /* LDO regulator internally chained to DCDC5 */ + AXP_DESC(AXP809, DC5LDO, "dc5ldo", NULL, 700, 1400, 100, + AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)), + AXP_DESC(AXP809, ALDO1, "aldo1", "aldoin", 700, 3300, 100, + AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)), + AXP_DESC(AXP809, ALDO2, "aldo2", "aldoin", 700, 3300, 100, + AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)), + AXP_DESC(AXP809, ALDO3, "aldo3", "aldoin", 700, 3300, 100, + AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)), + AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp809_dldo1_ranges, + 32, AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, + BIT(3)), + AXP_DESC(AXP809, DLDO2, "dldo2", "dldoin", 700, 3300, 100, + AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(4)), + AXP_DESC(AXP809, ELDO1, "eldo1", "eldoin", 700, 3300, 100, + AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)), + AXP_DESC(AXP809, ELDO2, "eldo2", "eldoin", 700, 3300, 100, + AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)), + AXP_DESC(AXP809, ELDO3, "eldo3", "eldoin", 700, 3300, 100, + AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)), + AXP_DESC_IO(AXP809, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100, + AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07, + AXP22X_IO_ENABLED, AXP22X_IO_DISABLED), + AXP_DESC_IO(AXP809, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100, + AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07, + AXP22X_IO_ENABLED, AXP22X_IO_DISABLED), + AXP_DESC_FIXED(AXP809, RTC_LDO, "rtc_ldo", "ips", 1800), + AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)), +}; + static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) { struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); @@ -245,6 +314,7 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) break; case AXP221_ID: case AXP223_ID: + case AXP809_ID: min = 1800; max = 4050; def = 3000; @@ -324,6 +394,7 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work case AXP221_ID: case AXP223_ID: + case AXP809_ID: if (id < AXP22X_DCDC1 || id > AXP22X_DCDC5) return -EINVAL; @@ -352,8 +423,9 @@ static int axp20x_regulator_probe(struct platform_device *pdev) }; int ret, i, nregulators; u32 workmode; - const char *axp22x_dc1_name = axp22x_regulators[AXP22X_DCDC1].name; - const char *axp22x_dc5_name = axp22x_regulators[AXP22X_DCDC5].name; + const char *dcdc1_name = axp22x_regulators[AXP22X_DCDC1].name; + const char *dcdc5_name = axp22x_regulators[AXP22X_DCDC5].name; + bool drivevbus = false; switch (axp20x->variant) { case AXP202_ID: @@ -365,6 +437,12 @@ static int axp20x_regulator_probe(struct platform_device *pdev) case AXP223_ID: regulators = axp22x_regulators; nregulators = AXP22X_REG_ID_MAX; + drivevbus = of_property_read_bool(pdev->dev.parent->of_node, + "x-powers,drive-vbus-en"); + break; + case AXP809_ID: + regulators = axp809_regulators; + nregulators = AXP809_REG_ID_MAX; break; default: dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n", @@ -388,22 +466,22 @@ static int axp20x_regulator_probe(struct platform_device *pdev) * part of this loop to see where we save the DT defined * name. */ - if (regulators == axp22x_regulators) { - if (i == AXP22X_DC1SW) { - new_desc = devm_kzalloc(&pdev->dev, - sizeof(*desc), - GFP_KERNEL); - *new_desc = regulators[i]; - new_desc->supply_name = axp22x_dc1_name; - desc = new_desc; - } else if (i == AXP22X_DC5LDO) { - new_desc = devm_kzalloc(&pdev->dev, - sizeof(*desc), - GFP_KERNEL); - *new_desc = regulators[i]; - new_desc->supply_name = axp22x_dc5_name; - desc = new_desc; - } + if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) || + (regulators == axp809_regulators && i == AXP809_DC1SW)) { + new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc), + GFP_KERNEL); + *new_desc = regulators[i]; + new_desc->supply_name = dcdc1_name; + desc = new_desc; + } + + if ((regulators == axp22x_regulators && i == AXP22X_DC5LDO) || + (regulators == axp809_regulators && i == AXP809_DC5LDO)) { + new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc), + GFP_KERNEL); + *new_desc = regulators[i]; + new_desc->supply_name = dcdc5_name; + desc = new_desc; } rdev = devm_regulator_register(&pdev->dev, desc, &config); @@ -426,16 +504,29 @@ static int axp20x_regulator_probe(struct platform_device *pdev) /* * Save AXP22X DCDC1 / DCDC5 regulator names for later. */ - if (regulators == axp22x_regulators) { - /* Can we use rdev->constraints->name instead? */ - if (i == AXP22X_DCDC1) - of_property_read_string(rdev->dev.of_node, - "regulator-name", - &axp22x_dc1_name); - else if (i == AXP22X_DCDC5) - of_property_read_string(rdev->dev.of_node, - "regulator-name", - &axp22x_dc5_name); + if ((regulators == axp22x_regulators && i == AXP22X_DCDC1) || + (regulators == axp809_regulators && i == AXP809_DCDC1)) + of_property_read_string(rdev->dev.of_node, + "regulator-name", + &dcdc1_name); + + if ((regulators == axp22x_regulators && i == AXP22X_DCDC5) || + (regulators == axp809_regulators && i == AXP809_DCDC5)) + of_property_read_string(rdev->dev.of_node, + "regulator-name", + &dcdc5_name); + } + + if (drivevbus) { + /* Change N_VBUSEN sense pin to DRIVEVBUS output pin */ + regmap_update_bits(axp20x->regmap, AXP20X_OVER_TMP, + AXP22X_MISC_N_VBUSEN_FUNC, 0); + rdev = devm_regulator_register(&pdev->dev, + &axp22x_drivevbus_regulator, + &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "Failed to register drivevbus\n"); + return PTR_ERR(rdev); } } diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index ec8184d53f13..db320e8fa865 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2509,33 +2509,6 @@ int regulator_is_enabled(struct regulator *regulator) EXPORT_SYMBOL_GPL(regulator_is_enabled); /** - * regulator_can_change_voltage - check if regulator can change voltage - * @regulator: regulator source - * - * Returns positive if the regulator driver backing the source/client - * can change its voltage, false otherwise. Useful for detecting fixed - * or dummy regulators and disabling voltage change logic in the client - * driver. - */ -int regulator_can_change_voltage(struct regulator *regulator) -{ - struct regulator_dev *rdev = regulator->rdev; - - if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) { - if (rdev->desc->n_voltages - rdev->desc->linear_min_sel > 1) - return 1; - - if (rdev->desc->continuous_voltage_range && - rdev->constraints->min_uV && rdev->constraints->max_uV && - rdev->constraints->min_uV != rdev->constraints->max_uV) - return 1; - } - - return 0; -} -EXPORT_SYMBOL_GPL(regulator_can_change_voltage); - -/** * regulator_count_voltages - count regulator_list_voltage() selectors * @regulator: regulator source * diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index 1050cb77561a..9ececfef42d6 100644 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -333,7 +333,7 @@ static const struct regulator_ops da9052_ldo_ops = { static struct da9052_regulator_info da9052_regulator_info[] = { DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO), DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO), - DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO), + DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO), DA9052_DCDC(BUCK4, 50, 1800, 3600, 5, 6, 0), DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0), DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), @@ -350,8 +350,8 @@ static struct da9052_regulator_info da9052_regulator_info[] = { static struct da9052_regulator_info da9053_regulator_info[] = { DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO), DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO), - DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO), - DA9052_DCDC(BUCK4, 25, 925, 2500, 6, 6, 0), + DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO), + DA9052_DCDC(BUCK4, 25, 950, 2525, 6, 6, 0), DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0), DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO), diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c index 01c0e3709b66..d0496d6b0934 100644 --- a/drivers/regulator/da9210-regulator.c +++ b/drivers/regulator/da9210-regulator.c @@ -21,12 +21,11 @@ #include <linux/err.h> #include <linux/i2c.h> #include <linux/module.h> -#include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/slab.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> +#include <linux/of_device.h> #include <linux/regulator/of_regulator.h> #include <linux/regmap.h> @@ -179,6 +178,13 @@ error_i2c: /* * I2C driver interface functions */ + +static const struct of_device_id da9210_dt_ids[] = { + { .compatible = "dlg,da9210", }, + { } +}; +MODULE_DEVICE_TABLE(of, da9210_dt_ids); + static int da9210_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -188,6 +194,16 @@ static int da9210_i2c_probe(struct i2c_client *i2c, struct regulator_dev *rdev = NULL; struct regulator_config config = { }; int error; + const struct of_device_id *match; + + if (i2c->dev.of_node && !pdata) { + match = of_match_device(of_match_ptr(da9210_dt_ids), + &i2c->dev); + if (!match) { + dev_err(&i2c->dev, "Error: No device match found\n"); + return -ENODEV; + } + } chip = devm_kzalloc(&i2c->dev, sizeof(struct da9210), GFP_KERNEL); if (!chip) @@ -264,6 +280,7 @@ MODULE_DEVICE_TABLE(i2c, da9210_i2c_id); static struct i2c_driver da9210_regulator_driver = { .driver = { .name = "da9210", + .of_match_table = of_match_ptr(da9210_dt_ids), }, .probe = da9210_i2c_probe, .id_table = da9210_i2c_id, diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c index 236abf473db5..aa47280efd32 100644 --- a/drivers/regulator/da9211-regulator.c +++ b/drivers/regulator/da9211-regulator.c @@ -1,5 +1,6 @@ /* - * da9211-regulator.c - Regulator device driver for DA9211/DA9213/DA9215 + * da9211-regulator.c - Regulator device driver for DA9211/DA9212 + * /DA9213/DA9214/DA9215 * Copyright (C) 2015 Dialog Semiconductor Ltd. * * This library is free software; you can redistribute it and/or @@ -493,7 +494,9 @@ static int da9211_i2c_probe(struct i2c_client *i2c, static const struct i2c_device_id da9211_i2c_id[] = { {"da9211", DA9211}, + {"da9212", DA9212}, {"da9213", DA9213}, + {"da9214", DA9214}, {"da9215", DA9215}, {}, }; @@ -502,8 +505,10 @@ MODULE_DEVICE_TABLE(i2c, da9211_i2c_id); #ifdef CONFIG_OF static const struct of_device_id da9211_dt_ids[] = { { .compatible = "dlg,da9211", .data = &da9211_i2c_id[0] }, - { .compatible = "dlg,da9213", .data = &da9211_i2c_id[1] }, - { .compatible = "dlg,da9215", .data = &da9211_i2c_id[2] }, + { .compatible = "dlg,da9212", .data = &da9211_i2c_id[1] }, + { .compatible = "dlg,da9213", .data = &da9211_i2c_id[2] }, + { .compatible = "dlg,da9214", .data = &da9211_i2c_id[3] }, + { .compatible = "dlg,da9215", .data = &da9211_i2c_id[4] }, {}, }; MODULE_DEVICE_TABLE(of, da9211_dt_ids); @@ -521,5 +526,5 @@ static struct i2c_driver da9211_regulator_driver = { module_i2c_driver(da9211_regulator_driver); MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>"); -MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211/DA9213/DA9215"); +MODULE_DESCRIPTION("DA9211/DA9212/DA9213/DA9214/DA9215 regulator driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/da9211-regulator.h b/drivers/regulator/da9211-regulator.h index d6ad96fc64d3..b841bbf330cc 100644 --- a/drivers/regulator/da9211-regulator.h +++ b/drivers/regulator/da9211-regulator.h @@ -1,5 +1,6 @@ /* - * da9211-regulator.h - Regulator definitions for DA9211/DA9213/DA9215 + * da9211-regulator.h - Regulator definitions for DA9211/DA9212 + * /DA9213/DA9214/DA9215 * Copyright (C) 2015 Dialog Semiconductor Ltd. * * This program is free software; you can redistribute it and/or diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index ff62d69ba0be..988a7472c2ab 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -79,18 +79,8 @@ of_get_fixed_voltage_config(struct device *dev, config->enabled_at_boot = true; config->gpio = of_get_named_gpio(np, "gpio", 0); - /* - * of_get_named_gpio() currently returns ENODEV rather than - * EPROBE_DEFER. This code attempts to be compatible with both - * for now; the ENODEV check can be removed once the API is fixed. - * of_get_named_gpio() doesn't differentiate between a missing - * property (which would be fine here, since the GPIO is optional) - * and some other error. Patches have been posted for both issues. - * Once they are check in, we should replace this with: - * if (config->gpio < 0 && config->gpio != -ENOENT) - */ - if ((config->gpio == -ENODEV) || (config->gpio == -EPROBE_DEFER)) - return ERR_PTR(-EPROBE_DEFER); + if ((config->gpio < 0) && (config->gpio != -ENOENT)) + return ERR_PTR(config->gpio); of_property_read_u32(np, "startup-delay-us", &config->startup_delay); diff --git a/drivers/regulator/lp873x-regulator.c b/drivers/regulator/lp873x-regulator.c index b4ffd113ba21..e504b9148226 100644 --- a/drivers/regulator/lp873x-regulator.c +++ b/drivers/regulator/lp873x-regulator.c @@ -20,7 +20,7 @@ #include <linux/mfd/lp873x.h> #define LP873X_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \ - _delay, _lr, _nlr, _cr) \ + _delay, _lr, _cr) \ [_id] = { \ .desc = { \ .name = _name, \ @@ -37,7 +37,7 @@ .enable_mask = _em, \ .ramp_delay = _delay, \ .linear_ranges = _lr, \ - .n_linear_ranges = _nlr, \ + .n_linear_ranges = ARRAY_SIZE(_lr), \ }, \ .ctrl2_reg = _cr, \ } @@ -175,22 +175,20 @@ static const struct lp873x_regulator regulators[] = { 256, LP873X_REG_BUCK0_VOUT, LP873X_BUCK0_VOUT_BUCK0_VSET, LP873X_REG_BUCK0_CTRL_1, LP873X_BUCK0_CTRL_1_BUCK0_EN, 10000, - buck0_buck1_ranges, 4, LP873X_REG_BUCK0_CTRL_2), + buck0_buck1_ranges, LP873X_REG_BUCK0_CTRL_2), LP873X_REGULATOR("BUCK1", LP873X_BUCK_1, "buck1", lp873x_buck01_ops, 256, LP873X_REG_BUCK1_VOUT, LP873X_BUCK1_VOUT_BUCK1_VSET, LP873X_REG_BUCK1_CTRL_1, LP873X_BUCK1_CTRL_1_BUCK1_EN, 10000, - buck0_buck1_ranges, 4, LP873X_REG_BUCK1_CTRL_2), + buck0_buck1_ranges, LP873X_REG_BUCK1_CTRL_2), LP873X_REGULATOR("LDO0", LP873X_LDO_0, "ldo0", lp873x_ldo01_ops, 26, LP873X_REG_LDO0_VOUT, LP873X_LDO0_VOUT_LDO0_VSET, LP873X_REG_LDO0_CTRL, - LP873X_LDO0_CTRL_LDO0_EN, 0, ldo0_ldo1_ranges, 1, - 0xFF), + LP873X_LDO0_CTRL_LDO0_EN, 0, ldo0_ldo1_ranges, 0xFF), LP873X_REGULATOR("LDO1", LP873X_LDO_1, "ldo1", lp873x_ldo01_ops, 26, LP873X_REG_LDO1_VOUT, LP873X_LDO1_VOUT_LDO1_VSET, LP873X_REG_LDO1_CTRL, - LP873X_LDO1_CTRL_LDO1_EN, 0, ldo0_ldo1_ranges, 1, - 0xFF), + LP873X_LDO1_CTRL_LDO1_EN, 0, ldo0_ldo1_ranges, 0xFF), }; static int lp873x_regulator_probe(struct platform_device *pdev) diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c index 321e804aeab0..a1b49a6d538f 100644 --- a/drivers/regulator/max77620-regulator.c +++ b/drivers/regulator/max77620-regulator.c @@ -123,6 +123,9 @@ static int max77620_regulator_set_fps_src(struct max77620_regulator *pmic, unsigned int val; int ret; + if (!rinfo) + return 0; + switch (fps_src) { case MAX77620_FPS_SRC_0: case MAX77620_FPS_SRC_1: @@ -171,6 +174,9 @@ static int max77620_regulator_set_fps_slots(struct max77620_regulator *pmic, int pd = rpdata->active_fps_pd_slot; int ret = 0; + if (!rinfo) + return 0; + if (is_suspend) { pu = rpdata->suspend_fps_pu_slot; pd = rpdata->suspend_fps_pd_slot; @@ -680,7 +686,6 @@ static struct max77620_regulator_info max77620_regs_info[MAX77620_NUM_REGS] = { RAIL_SD(SD1, sd1, "in-sd1", SD1, 600000, 1550000, 12500, 0x22, SD1), RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE), RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE), - RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE), RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000), RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000), diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c index 08d2f13eca00..3958f50c5975 100644 --- a/drivers/regulator/max8973-regulator.c +++ b/drivers/regulator/max8973-regulator.c @@ -271,22 +271,18 @@ static int max8973_set_ramp_delay(struct regulator_dev *rdev, struct max8973_chip *max = rdev_get_drvdata(rdev); unsigned int control; int ret; - int ret_val; /* Set ramp delay */ - if (ramp_delay < 25000) { + if (ramp_delay <= 12000) control = MAX8973_RAMP_12mV_PER_US; - ret_val = 12000; - } else if (ramp_delay < 50000) { + else if (ramp_delay <= 25000) control = MAX8973_RAMP_25mV_PER_US; - ret_val = 25000; - } else if (ramp_delay < 200000) { + else if (ramp_delay <= 50000) control = MAX8973_RAMP_50mV_PER_US; - ret_val = 50000; - } else { + else if (ramp_delay <= 200000) control = MAX8973_RAMP_200mV_PER_US; - ret_val = 200000; - } + else + return -EINVAL; ret = regmap_update_bits(max->regmap, MAX8973_CONTROL1, MAX8973_RAMP_MASK, control); diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c new file mode 100644 index 000000000000..b7b9670f0979 --- /dev/null +++ b/drivers/regulator/mt6323-regulator.c @@ -0,0 +1,425 @@ +/* + * Copyright (c) 2016 MediaTek Inc. + * Author: Chen Zhong <chen.zhong@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/mt6397/core.h> +#include <linux/mfd/mt6323/registers.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/mt6323-regulator.h> +#include <linux/regulator/of_regulator.h> + +#define MT6323_LDO_MODE_NORMAL 0 +#define MT6323_LDO_MODE_LP 1 + +/* + * MT6323 regulators' information + * + * @desc: standard fields of regulator description. + * @qi: Mask for query enable signal status of regulators + * @vselon_reg: Register sections for hardware control mode of bucks + * @vselctrl_reg: Register for controlling the buck control mode. + * @vselctrl_mask: Mask for query buck's voltage control mode. + */ +struct mt6323_regulator_info { + struct regulator_desc desc; + u32 qi; + u32 vselon_reg; + u32 vselctrl_reg; + u32 vselctrl_mask; + u32 modeset_reg; + u32 modeset_mask; +}; + +#define MT6323_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \ + vosel, vosel_mask, voselon, vosel_ctrl) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = (max - min)/step + 1, \ + .linear_ranges = volt_ranges, \ + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(0), \ + }, \ + .qi = BIT(13), \ + .vselon_reg = voselon, \ + .vselctrl_reg = vosel_ctrl, \ + .vselctrl_mask = BIT(1), \ +} + +#define MT6323_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \ + vosel_mask, _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_table_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(ldo_volt_table), \ + .volt_table = ldo_volt_table, \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +#define MT6323_REG_FIXED(match, vreg, enreg, enbit, volt, \ + _modeset_reg, _modeset_mask) \ +[MT6323_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6323_volt_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6323_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = 1, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + .min_uV = volt, \ + }, \ + .qi = BIT(15), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = _modeset_mask, \ +} + +static const struct regulator_linear_range buck_volt_range1[] = { + REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), +}; + +static const struct regulator_linear_range buck_volt_range2[] = { + REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500), +}; + +static const struct regulator_linear_range buck_volt_range3[] = { + REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000), +}; + +static const u32 ldo_volt_table1[] = { + 3300000, 3400000, 3500000, 3600000, +}; + +static const u32 ldo_volt_table2[] = { + 1500000, 1800000, 2500000, 2800000, +}; + +static const u32 ldo_volt_table3[] = { + 1800000, 3300000, +}; + +static const u32 ldo_volt_table4[] = { + 3000000, 3300000, +}; + +static const u32 ldo_volt_table5[] = { + 1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000, +}; + +static const u32 ldo_volt_table6[] = { + 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000, +}; + +static const u32 ldo_volt_table7[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table8[] = { + 1800000, 3000000, +}; + +static const u32 ldo_volt_table9[] = { + 1200000, 1350000, 1500000, 1800000, +}; + +static const u32 ldo_volt_table10[] = { + 1200000, 1300000, 1500000, 1800000, +}; + +static int mt6323_get_status(struct regulator_dev *rdev) +{ + int ret; + u32 regval; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + ret = regmap_read(rdev->regmap, info->desc.enable_reg, ®val); + if (ret != 0) { + dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret); + return ret; + } + + return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; +} + +static int mt6323_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + int ret, val = 0; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n", + info->desc.name); + return -EINVAL; + } + + switch (mode) { + case REGULATOR_MODE_STANDBY: + val = MT6323_LDO_MODE_LP; + break; + case REGULATOR_MODE_NORMAL: + val = MT6323_LDO_MODE_NORMAL; + break; + default: + return -EINVAL; + } + + val <<= ffs(info->modeset_mask) - 1; + + ret = regmap_update_bits(rdev->regmap, info->modeset_reg, + info->modeset_mask, val); + + return ret; +} + +static unsigned int mt6323_ldo_get_mode(struct regulator_dev *rdev) +{ + unsigned int val; + unsigned int mode; + int ret; + struct mt6323_regulator_info *info = rdev_get_drvdata(rdev); + + if (!info->modeset_mask) { + dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n", + info->desc.name); + return -EINVAL; + } + + ret = regmap_read(rdev->regmap, info->modeset_reg, &val); + if (ret < 0) + return ret; + + val &= info->modeset_mask; + val >>= ffs(info->modeset_mask) - 1; + + if (val & 0x1) + mode = REGULATOR_MODE_STANDBY; + else + mode = REGULATOR_MODE_NORMAL; + + return mode; +} + +static const struct regulator_ops mt6323_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, +}; + +static const struct regulator_ops mt6323_volt_table_ops = { + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +static const struct regulator_ops mt6323_volt_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6323_get_status, + .set_mode = mt6323_ldo_set_mode, + .get_mode = mt6323_ldo_get_mode, +}; + +/* The array is indexed by id(MT6323_ID_XXX) */ +static struct mt6323_regulator_info mt6323_regulators[] = { + MT6323_BUCK("buck_vproc", VPROC, 700000, 1493750, 6250, + buck_volt_range1, MT6323_VPROC_CON7, MT6323_VPROC_CON9, 0x7f, + MT6323_VPROC_CON10, MT6323_VPROC_CON5), + MT6323_BUCK("buck_vsys", VSYS, 1400000, 2987500, 12500, + buck_volt_range2, MT6323_VSYS_CON7, MT6323_VSYS_CON9, 0x7f, + MT6323_VSYS_CON10, MT6323_VSYS_CON5), + MT6323_BUCK("buck_vpa", VPA, 500000, 3650000, 50000, + buck_volt_range3, MT6323_VPA_CON7, MT6323_VPA_CON9, + 0x3f, MT6323_VPA_CON10, MT6323_VPA_CON5), + MT6323_REG_FIXED("ldo_vtcxo", VTCXO, MT6323_ANALDO_CON1, 10, 2800000, + MT6323_ANALDO_CON1, 0x2), + MT6323_REG_FIXED("ldo_vcn28", VCN28, MT6323_ANALDO_CON19, 12, 2800000, + MT6323_ANALDO_CON20, 0x2), + MT6323_LDO("ldo_vcn33_bt", VCN33_BT, ldo_volt_table1, + MT6323_ANALDO_CON16, 7, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_LDO("ldo_vcn33_wifi", VCN33_WIFI, ldo_volt_table1, + MT6323_ANALDO_CON17, 12, MT6323_ANALDO_CON16, 0xC, + MT6323_ANALDO_CON21, 0x2), + MT6323_REG_FIXED("ldo_va", VA, MT6323_ANALDO_CON2, 14, 2800000, + MT6323_ANALDO_CON2, 0x2), + MT6323_LDO("ldo_vcama", VCAMA, ldo_volt_table2, + MT6323_ANALDO_CON4, 15, MT6323_ANALDO_CON10, 0x60, -1, 0), + MT6323_REG_FIXED("ldo_vio28", VIO28, MT6323_DIGLDO_CON0, 14, 2800000, + MT6323_DIGLDO_CON0, 0x2), + MT6323_REG_FIXED("ldo_vusb", VUSB, MT6323_DIGLDO_CON2, 14, 3300000, + MT6323_DIGLDO_CON2, 0x2), + MT6323_LDO("ldo_vmc", VMC, ldo_volt_table3, + MT6323_DIGLDO_CON3, 12, MT6323_DIGLDO_CON24, 0x10, + MT6323_DIGLDO_CON3, 0x2), + MT6323_LDO("ldo_vmch", VMCH, ldo_volt_table4, + MT6323_DIGLDO_CON5, 14, MT6323_DIGLDO_CON26, 0x80, + MT6323_DIGLDO_CON5, 0x2), + MT6323_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table4, + MT6323_DIGLDO_CON6, 14, MT6323_DIGLDO_CON27, 0x80, + MT6323_DIGLDO_CON6, 0x2), + MT6323_LDO("ldo_vgp1", VGP1, ldo_volt_table5, + MT6323_DIGLDO_CON7, 15, MT6323_DIGLDO_CON28, 0xE0, + MT6323_DIGLDO_CON7, 0x2), + MT6323_LDO("ldo_vgp2", VGP2, ldo_volt_table6, + MT6323_DIGLDO_CON8, 15, MT6323_DIGLDO_CON29, 0xE0, + MT6323_DIGLDO_CON8, 0x2), + MT6323_LDO("ldo_vgp3", VGP3, ldo_volt_table7, + MT6323_DIGLDO_CON9, 15, MT6323_DIGLDO_CON30, 0x60, + MT6323_DIGLDO_CON9, 0x2), + MT6323_REG_FIXED("ldo_vcn18", VCN18, MT6323_DIGLDO_CON11, 14, 1800000, + MT6323_DIGLDO_CON11, 0x2), + MT6323_LDO("ldo_vsim1", VSIM1, ldo_volt_table8, + MT6323_DIGLDO_CON13, 15, MT6323_DIGLDO_CON34, 0x20, + MT6323_DIGLDO_CON13, 0x2), + MT6323_LDO("ldo_vsim2", VSIM2, ldo_volt_table8, + MT6323_DIGLDO_CON14, 15, MT6323_DIGLDO_CON35, 0x20, + MT6323_DIGLDO_CON14, 0x2), + MT6323_REG_FIXED("ldo_vrtc", VRTC, MT6323_DIGLDO_CON15, 8, 2800000, + -1, 0), + MT6323_LDO("ldo_vcamaf", VCAMAF, ldo_volt_table5, + MT6323_DIGLDO_CON31, 15, MT6323_DIGLDO_CON32, 0xE0, + MT6323_DIGLDO_CON31, 0x2), + MT6323_LDO("ldo_vibr", VIBR, ldo_volt_table5, + MT6323_DIGLDO_CON39, 15, MT6323_DIGLDO_CON40, 0xE0, + MT6323_DIGLDO_CON39, 0x2), + MT6323_REG_FIXED("ldo_vrf18", VRF18, MT6323_DIGLDO_CON45, 15, 1825000, + MT6323_DIGLDO_CON45, 0x2), + MT6323_LDO("ldo_vm", VM, ldo_volt_table9, + MT6323_DIGLDO_CON47, 14, MT6323_DIGLDO_CON48, 0x30, + MT6323_DIGLDO_CON47, 0x2), + MT6323_REG_FIXED("ldo_vio18", VIO18, MT6323_DIGLDO_CON49, 14, 1800000, + MT6323_DIGLDO_CON49, 0x2), + MT6323_LDO("ldo_vcamd", VCAMD, ldo_volt_table10, + MT6323_DIGLDO_CON51, 14, MT6323_DIGLDO_CON52, 0x60, + MT6323_DIGLDO_CON51, 0x2), + MT6323_REG_FIXED("ldo_vcamio", VCAMIO, MT6323_DIGLDO_CON53, 14, 1800000, + MT6323_DIGLDO_CON53, 0x2), +}; + +static int mt6323_set_buck_vosel_reg(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + int i; + u32 regval; + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + if (mt6323_regulators[i].vselctrl_reg) { + if (regmap_read(mt6323->regmap, + mt6323_regulators[i].vselctrl_reg, + ®val) < 0) { + dev_err(&pdev->dev, + "Failed to read buck ctrl\n"); + return -EIO; + } + + if (regval & mt6323_regulators[i].vselctrl_mask) { + mt6323_regulators[i].desc.vsel_reg = + mt6323_regulators[i].vselon_reg; + } + } + } + + return 0; +} + +static int mt6323_regulator_probe(struct platform_device *pdev) +{ + struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = {}; + struct regulator_dev *rdev; + int i; + u32 reg_value; + + /* Query buck controller to select activated voltage register part */ + if (mt6323_set_buck_vosel_reg(pdev)) + return -EIO; + + /* Read PMIC chip revision to update constraints and voltage table */ + if (regmap_read(mt6323->regmap, MT6323_CID, ®_value) < 0) { + dev_err(&pdev->dev, "Failed to read Chip ID\n"); + return -EIO; + } + dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value); + + for (i = 0; i < MT6323_MAX_REGULATOR; i++) { + config.dev = &pdev->dev; + config.driver_data = &mt6323_regulators[i]; + config.regmap = mt6323->regmap; + rdev = devm_regulator_register(&pdev->dev, + &mt6323_regulators[i].desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", + mt6323_regulators[i].desc.name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static const struct platform_device_id mt6323_platform_ids[] = { + {"mt6323-regulator", 0}, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(platform, mt6323_platform_ids); + +static struct platform_driver mt6323_regulator_driver = { + .driver = { + .name = "mt6323-regulator", + }, + .probe = mt6323_regulator_probe, + .id_table = mt6323_platform_ids, +}; + +module_platform_driver(mt6323_regulator_driver); + +MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>"); +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6323 PMIC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/mt6397-regulator.c b/drivers/regulator/mt6397-regulator.c index 17a5b6c2d6a9..c6c6aa85e4e8 100644 --- a/drivers/regulator/mt6397-regulator.c +++ b/drivers/regulator/mt6397-regulator.c @@ -23,6 +23,9 @@ #include <linux/regulator/mt6397-regulator.h> #include <linux/regulator/of_regulator.h> +#define MT6397_BUCK_MODE_AUTO 0 +#define MT6397_BUCK_MODE_FORCE_PWM 1 + /* * MT6397 regulators' information * @@ -38,10 +41,14 @@ struct mt6397_regulator_info { u32 vselon_reg; u32 vselctrl_reg; u32 vselctrl_mask; + u32 modeset_reg; + u32 modeset_mask; + u32 modeset_shift; }; #define MT6397_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \ - vosel, vosel_mask, voselon, vosel_ctrl) \ + vosel, vosel_mask, voselon, vosel_ctrl, _modeset_reg, \ + _modeset_shift) \ [MT6397_ID_##vreg] = { \ .desc = { \ .name = #vreg, \ @@ -62,6 +69,9 @@ struct mt6397_regulator_info { .vselon_reg = voselon, \ .vselctrl_reg = vosel_ctrl, \ .vselctrl_mask = BIT(1), \ + .modeset_reg = _modeset_reg, \ + .modeset_mask = BIT(_modeset_shift), \ + .modeset_shift = _modeset_shift \ } #define MT6397_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \ @@ -145,6 +155,63 @@ static const u32 ldo_volt_table7[] = { 1300000, 1500000, 1800000, 2000000, 2500000, 2800000, 3000000, 3300000, }; +static int mt6397_regulator_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct mt6397_regulator_info *info = rdev_get_drvdata(rdev); + int ret, val; + + switch (mode) { + case REGULATOR_MODE_FAST: + val = MT6397_BUCK_MODE_FORCE_PWM; + break; + case REGULATOR_MODE_NORMAL: + val = MT6397_BUCK_MODE_AUTO; + break; + default: + ret = -EINVAL; + goto err_mode; + } + + dev_dbg(&rdev->dev, "mt6397 buck set_mode %#x, %#x, %#x, %#x\n", + info->modeset_reg, info->modeset_mask, + info->modeset_shift, val); + + val <<= info->modeset_shift; + ret = regmap_update_bits(rdev->regmap, info->modeset_reg, + info->modeset_mask, val); +err_mode: + if (ret != 0) { + dev_err(&rdev->dev, + "Failed to set mt6397 buck mode: %d\n", ret); + return ret; + } + + return 0; +} + +static unsigned int mt6397_regulator_get_mode(struct regulator_dev *rdev) +{ + struct mt6397_regulator_info *info = rdev_get_drvdata(rdev); + int ret, regval; + + ret = regmap_read(rdev->regmap, info->modeset_reg, ®val); + if (ret != 0) { + dev_err(&rdev->dev, + "Failed to get mt6397 buck mode: %d\n", ret); + return ret; + } + + switch ((regval & info->modeset_mask) >> info->modeset_shift) { + case MT6397_BUCK_MODE_AUTO: + return REGULATOR_MODE_NORMAL; + case MT6397_BUCK_MODE_FORCE_PWM: + return REGULATOR_MODE_FAST; + default: + return -EINVAL; + } +} + static int mt6397_get_status(struct regulator_dev *rdev) { int ret; @@ -160,7 +227,7 @@ static int mt6397_get_status(struct regulator_dev *rdev) return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; } -static struct regulator_ops mt6397_volt_range_ops = { +static const struct regulator_ops mt6397_volt_range_ops = { .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, .set_voltage_sel = regulator_set_voltage_sel_regmap, @@ -170,9 +237,11 @@ static struct regulator_ops mt6397_volt_range_ops = { .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .get_status = mt6397_get_status, + .set_mode = mt6397_regulator_set_mode, + .get_mode = mt6397_regulator_get_mode, }; -static struct regulator_ops mt6397_volt_table_ops = { +static const struct regulator_ops mt6397_volt_table_ops = { .list_voltage = regulator_list_voltage_table, .map_voltage = regulator_map_voltage_iterate, .set_voltage_sel = regulator_set_voltage_sel_regmap, @@ -184,7 +253,7 @@ static struct regulator_ops mt6397_volt_table_ops = { .get_status = mt6397_get_status, }; -static struct regulator_ops mt6397_volt_fixed_ops = { +static const struct regulator_ops mt6397_volt_fixed_ops = { .list_voltage = regulator_list_voltage_linear, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -196,28 +265,30 @@ static struct regulator_ops mt6397_volt_fixed_ops = { static struct mt6397_regulator_info mt6397_regulators[] = { MT6397_BUCK("buck_vpca15", VPCA15, 700000, 1493750, 6250, buck_volt_range1, MT6397_VCA15_CON7, MT6397_VCA15_CON9, 0x7f, - MT6397_VCA15_CON10, MT6397_VCA15_CON5), + MT6397_VCA15_CON10, MT6397_VCA15_CON5, MT6397_VCA15_CON2, 11), MT6397_BUCK("buck_vpca7", VPCA7, 700000, 1493750, 6250, buck_volt_range1, MT6397_VPCA7_CON7, MT6397_VPCA7_CON9, 0x7f, - MT6397_VPCA7_CON10, MT6397_VPCA7_CON5), + MT6397_VPCA7_CON10, MT6397_VPCA7_CON5, MT6397_VPCA7_CON2, 8), MT6397_BUCK("buck_vsramca15", VSRAMCA15, 700000, 1493750, 6250, buck_volt_range1, MT6397_VSRMCA15_CON7, MT6397_VSRMCA15_CON9, - 0x7f, MT6397_VSRMCA15_CON10, MT6397_VSRMCA15_CON5), + 0x7f, MT6397_VSRMCA15_CON10, MT6397_VSRMCA15_CON5, + MT6397_VSRMCA15_CON2, 8), MT6397_BUCK("buck_vsramca7", VSRAMCA7, 700000, 1493750, 6250, buck_volt_range1, MT6397_VSRMCA7_CON7, MT6397_VSRMCA7_CON9, - 0x7f, MT6397_VSRMCA7_CON10, MT6397_VSRMCA7_CON5), + 0x7f, MT6397_VSRMCA7_CON10, MT6397_VSRMCA7_CON5, + MT6397_VSRMCA7_CON2, 8), MT6397_BUCK("buck_vcore", VCORE, 700000, 1493750, 6250, buck_volt_range1, MT6397_VCORE_CON7, MT6397_VCORE_CON9, 0x7f, - MT6397_VCORE_CON10, MT6397_VCORE_CON5), + MT6397_VCORE_CON10, MT6397_VCORE_CON5, MT6397_VCORE_CON2, 8), MT6397_BUCK("buck_vgpu", VGPU, 700000, 1493750, 6250, buck_volt_range1, MT6397_VGPU_CON7, MT6397_VGPU_CON9, 0x7f, - MT6397_VGPU_CON10, MT6397_VGPU_CON5), + MT6397_VGPU_CON10, MT6397_VGPU_CON5, MT6397_VGPU_CON2, 8), MT6397_BUCK("buck_vdrm", VDRM, 800000, 1593750, 6250, buck_volt_range2, MT6397_VDRM_CON7, MT6397_VDRM_CON9, 0x7f, - MT6397_VDRM_CON10, MT6397_VDRM_CON5), + MT6397_VDRM_CON10, MT6397_VDRM_CON5, MT6397_VDRM_CON2, 8), MT6397_BUCK("buck_vio18", VIO18, 1500000, 2120000, 20000, buck_volt_range3, MT6397_VIO18_CON7, MT6397_VIO18_CON9, 0x1f, - MT6397_VIO18_CON10, MT6397_VIO18_CON5), + MT6397_VIO18_CON10, MT6397_VIO18_CON5, MT6397_VIO18_CON2, 8), MT6397_REG_FIXED("ldo_vtcxo", VTCXO, MT6397_ANALDO_CON0, 10, 2800000), MT6397_REG_FIXED("ldo_va28", VA28, MT6397_ANALDO_CON1, 14, 2800000), MT6397_LDO("ldo_vcama", VCAMA, ldo_volt_table1, diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index cd828dbf9d52..4f613ec99500 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -163,6 +163,9 @@ static void of_get_regulation_constraints(struct device_node *np, "regulator-suspend-microvolt", &pval)) suspend_state->uV = pval; + if (i == PM_SUSPEND_MEM) + constraints->initial_state = PM_SUSPEND_MEM; + of_node_put(suspend_np); suspend_state = NULL; suspend_np = NULL; diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 2a44e5dd9c2a..cb18b5c4f2db 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -70,6 +70,7 @@ struct pfuze_chip { struct device *dev; struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR]; struct regulator_dev *regulators[PFUZE100_MAX_REGULATOR]; + struct pfuze_regulator *pfuze_regulators; }; static const int pfuze100_swbst[] = { @@ -334,8 +335,6 @@ static struct pfuze_regulator pfuze3000_regulators[] = { PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), }; -static struct pfuze_regulator *pfuze_regulators; - #ifdef CONFIG_OF /* PFUZE100 */ static struct of_regulator_match pfuze100_matches[] = { @@ -563,21 +562,21 @@ static int pfuze100_regulator_probe(struct i2c_client *client, /* use the right regulators after identify the right device */ switch (pfuze_chip->chip_id) { case PFUZE3000: - pfuze_regulators = pfuze3000_regulators; + pfuze_chip->pfuze_regulators = pfuze3000_regulators; regulator_num = ARRAY_SIZE(pfuze3000_regulators); sw_check_start = PFUZE3000_SW2; sw_check_end = PFUZE3000_SW2; sw_hi = 1 << 3; break; case PFUZE200: - pfuze_regulators = pfuze200_regulators; + pfuze_chip->pfuze_regulators = pfuze200_regulators; regulator_num = ARRAY_SIZE(pfuze200_regulators); sw_check_start = PFUZE200_SW2; sw_check_end = PFUZE200_SW3B; break; case PFUZE100: default: - pfuze_regulators = pfuze100_regulators; + pfuze_chip->pfuze_regulators = pfuze100_regulators; regulator_num = ARRAY_SIZE(pfuze100_regulators); sw_check_start = PFUZE100_SW2; sw_check_end = PFUZE100_SW4; @@ -587,7 +586,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, (pfuze_chip->chip_id == PFUZE100) ? "100" : ((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000")); - memcpy(pfuze_chip->regulator_descs, pfuze_regulators, + memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators, sizeof(pfuze_chip->regulator_descs)); ret = pfuze_parse_regulators_dt(pfuze_chip); @@ -631,7 +630,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, devm_regulator_register(&client->dev, desc, &config); if (IS_ERR(pfuze_chip->regulators[i])) { dev_err(&client->dev, "register regulator%s failed\n", - pfuze_regulators[i].desc.name); + pfuze_chip->pfuze_regulators[i].desc.name); return PTR_ERR(pfuze_chip->regulators[i]); } } @@ -650,5 +649,5 @@ static struct i2c_driver pfuze_driver = { module_i2c_driver(pfuze_driver); MODULE_AUTHOR("Robin Gong <b38343@freescale.com>"); -MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/PFUZE200 PMIC"); +MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000 PMIC"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/pv88060-regulator.c b/drivers/regulator/pv88060-regulator.c index c448b727f5f8..6c4afc73ecac 100644 --- a/drivers/regulator/pv88060-regulator.c +++ b/drivers/regulator/pv88060-regulator.c @@ -14,7 +14,6 @@ */ #include <linux/err.h> -#include <linux/gpio.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/init.h> @@ -25,8 +24,6 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/regulator/of_regulator.h> -#include <linux/proc_fs.h> -#include <linux/uaccess.h> #include "pv88060-regulator.h" #define PV88060_MAX_REGULATORS 14 diff --git a/drivers/regulator/pv88080-regulator.c b/drivers/regulator/pv88080-regulator.c index d7107566c429..81950bdb1cc4 100644 --- a/drivers/regulator/pv88080-regulator.c +++ b/drivers/regulator/pv88080-regulator.c @@ -14,7 +14,6 @@ */ #include <linux/err.h> -#include <linux/gpio.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/init.h> @@ -25,8 +24,6 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/regulator/of_regulator.h> -#include <linux/proc_fs.h> -#include <linux/uaccess.h> #include "pv88080-regulator.h" #define PV88080_MAX_REGULATORS 3 diff --git a/drivers/regulator/pv88090-regulator.c b/drivers/regulator/pv88090-regulator.c index 0057c6740d6f..421641175352 100644 --- a/drivers/regulator/pv88090-regulator.c +++ b/drivers/regulator/pv88090-regulator.c @@ -14,7 +14,6 @@ */ #include <linux/err.h> -#include <linux/gpio.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/init.h> @@ -25,8 +24,6 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/regulator/of_regulator.h> -#include <linux/proc_fs.h> -#include <linux/uaccess.h> #include "pv88090-regulator.h" #define PV88090_MAX_REGULATORS 5 diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c index 56a17ec5b5ef..5022fa8d10c6 100644 --- a/drivers/regulator/qcom_smd-regulator.c +++ b/drivers/regulator/qcom_smd-regulator.c @@ -140,6 +140,18 @@ static const struct regulator_ops rpm_smps_ldo_ops = { .enable = rpm_reg_enable, .disable = rpm_reg_disable, .is_enabled = rpm_reg_is_enabled, + .list_voltage = regulator_list_voltage_linear_range, + + .get_voltage = rpm_reg_get_voltage, + .set_voltage = rpm_reg_set_voltage, + + .set_load = rpm_reg_set_load, +}; + +static const struct regulator_ops rpm_smps_ldo_ops_fixed = { + .enable = rpm_reg_enable, + .disable = rpm_reg_disable, + .is_enabled = rpm_reg_is_enabled, .get_voltage = rpm_reg_get_voltage, .set_voltage = rpm_reg_set_voltage, @@ -199,7 +211,7 @@ static const struct regulator_desc pma8084_switch = { static const struct regulator_desc pm8x41_hfsmps = { .linear_ranges = (struct regulator_linear_range[]) { REGULATOR_LINEAR_RANGE( 375000, 0, 95, 12500), - REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000), + REGULATOR_LINEAR_RANGE(1575000, 96, 158, 25000), }, .n_linear_ranges = 2, .n_voltages = 159, @@ -247,7 +259,7 @@ static const struct regulator_desc pm8941_nldo = { static const struct regulator_desc pm8941_lnldo = { .fixed_uV = 1740000, .n_voltages = 1, - .ops = &rpm_smps_ldo_ops, + .ops = &rpm_smps_ldo_ops_fixed, }; static const struct regulator_desc pm8941_switch = { diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c index 02fb6b4ea820..d838e77dd947 100644 --- a/drivers/regulator/s2mps11.c +++ b/drivers/regulator/s2mps11.c @@ -750,7 +750,7 @@ static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = { /* voltage range for s2mps15 LDO 7, 8, 9 and 10 */ static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = { - REGULATOR_LINEAR_RANGE(700000, 0xc, 0x18, 25000), + REGULATOR_LINEAR_RANGE(700000, 0x10, 0x20, 25000), }; /* voltage range for s2mps15 LDO 1 */ @@ -760,12 +760,12 @@ static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = { /* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */ static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = { - REGULATOR_LINEAR_RANGE(500000, 0x20, 0xb0, 6250), + REGULATOR_LINEAR_RANGE(500000, 0x20, 0xc0, 6250), }; /* voltage range for s2mps15 BUCK 8, 9 and 10 */ static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = { - REGULATOR_LINEAR_RANGE(1000000, 0x20, 0xc0, 12500), + REGULATOR_LINEAR_RANGE(1000000, 0x20, 0x78, 12500), }; static const struct regulator_desc s2mps15_regulators[] = { diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c index 572816e30095..c139890c1514 100644 --- a/drivers/regulator/tps51632-regulator.c +++ b/drivers/regulator/tps51632-regulator.c @@ -94,11 +94,14 @@ static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) { struct tps51632_chip *tps = rdev_get_drvdata(rdev); - int bit = ramp_delay/6000; + int bit; int ret; - if (bit) - bit--; + if (ramp_delay == 0) + bit = 0; + else + bit = DIV_ROUND_UP(ramp_delay, 6000) - 1; + ret = regmap_write(tps->regmap, TPS51632_SLEW_REGS, BIT(bit)); if (ret < 0) dev_err(tps->dev, "SLEW reg write failed, err %d\n", ret); |