summaryrefslogtreecommitdiff
path: root/drivers/rtc/rtc-abx80x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rtc/rtc-abx80x.c')
-rw-r--r--drivers/rtc/rtc-abx80x.c71
1 files changed, 67 insertions, 4 deletions
diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c
index 4d24f7288ad7..6ddcad642d1e 100644
--- a/drivers/rtc/rtc-abx80x.c
+++ b/drivers/rtc/rtc-abx80x.c
@@ -5,7 +5,7 @@
* Copyright 2014-2015 Macq S.A.
*
* Author: Philippe De Muyter <phdm@macqel.be>
- * Author: Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ * Author: Alexandre Belloni <alexandre.belloni@bootlin.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -46,6 +46,9 @@
#define ABX8XX_CTRL_ARST BIT(2)
#define ABX8XX_CTRL_12_24 BIT(6)
+#define ABX8XX_REG_CTRL2 0x11
+#define ABX8XX_CTRL2_RSVD BIT(5)
+
#define ABX8XX_REG_IRQ 0x12
#define ABX8XX_IRQ_AIE BIT(2)
#define ABX8XX_IRQ_IM_1_4 (0x3 << 5)
@@ -78,6 +81,9 @@
#define ABX8XX_REG_ID0 0x28
+#define ABX8XX_REG_OUT_CTRL 0x30
+#define ABX8XX_OUT_CTRL_EXDS BIT(4)
+
#define ABX8XX_REG_TRICKLE 0x20
#define ABX8XX_TRICKLE_CHARGE_ENABLE 0xa0
#define ABX8XX_TRICKLE_STANDARD_DIODE 0x8
@@ -86,7 +92,7 @@
static u8 trickle_resistors[] = {0, 3, 6, 11};
enum abx80x_chip {AB0801, AB0803, AB0804, AB0805,
- AB1801, AB1803, AB1804, AB1805, ABX80X};
+ AB1801, AB1803, AB1804, AB1805, RV1805, ABX80X};
struct abx80x_cap {
u16 pn;
@@ -103,6 +109,7 @@ static struct abx80x_cap abx80x_caps[] = {
[AB1803] = {.pn = 0x1803},
[AB1804] = {.pn = 0x1804, .has_tc = true, .has_wdog = true},
[AB1805] = {.pn = 0x1805, .has_tc = true, .has_wdog = true},
+ [RV1805] = {.pn = 0x1805, .has_tc = true, .has_wdog = true},
[ABX80X] = {.pn = 0}
};
@@ -723,6 +730,62 @@ static int abx80x_probe(struct i2c_client *client,
return -EIO;
}
+ /* Configure RV1805 specifics */
+ if (part == RV1805) {
+ /*
+ * Avoid accidentally entering test mode. This can happen
+ * on the RV1805 in case the reserved bit 5 in control2
+ * register is set. RV-1805-C3 datasheet indicates that
+ * the bit should be cleared in section 11h - Control2.
+ */
+ data = i2c_smbus_read_byte_data(client, ABX8XX_REG_CTRL2);
+ if (data < 0) {
+ dev_err(&client->dev,
+ "Unable to read control2 register\n");
+ return -EIO;
+ }
+
+ err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CTRL2,
+ data & ~ABX8XX_CTRL2_RSVD);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "Unable to write control2 register\n");
+ return -EIO;
+ }
+
+ /*
+ * Avoid extra power leakage. The RV1805 uses smaller
+ * 10pin package and the EXTI input is not present.
+ * Disable it to avoid leakage.
+ */
+ data = i2c_smbus_read_byte_data(client, ABX8XX_REG_OUT_CTRL);
+ if (data < 0) {
+ dev_err(&client->dev,
+ "Unable to read output control register\n");
+ return -EIO;
+ }
+
+ /*
+ * Write the configuration key register to enable access to
+ * the config2 register
+ */
+ err = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
+ ABX8XX_CFG_KEY_MISC);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "Unable to write configuration key\n");
+ return -EIO;
+ }
+
+ err = i2c_smbus_write_byte_data(client, ABX8XX_REG_OUT_CTRL,
+ data | ABX8XX_OUT_CTRL_EXDS);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "Unable to write output control register\n");
+ return -EIO;
+ }
+ }
+
/* part autodetection */
if (part == ABX80X) {
for (i = 0; abx80x_caps[i].pn; i++)
@@ -826,7 +889,7 @@ static const struct i2c_device_id abx80x_id[] = {
{ "ab1803", AB1803 },
{ "ab1804", AB1804 },
{ "ab1805", AB1805 },
- { "rv1805", AB1805 },
+ { "rv1805", RV1805 },
{ }
};
MODULE_DEVICE_TABLE(i2c, abx80x_id);
@@ -843,6 +906,6 @@ static struct i2c_driver abx80x_driver = {
module_i2c_driver(abx80x_driver);
MODULE_AUTHOR("Philippe De Muyter <phdm@macqel.be>");
-MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>");
MODULE_DESCRIPTION("Abracon ABX80X RTC driver");
MODULE_LICENSE("GPL v2");