summaryrefslogtreecommitdiff
path: root/drivers/scsi/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/Kconfig')
-rw-r--r--drivers/scsi/Kconfig51
1 files changed, 21 insertions, 30 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 1b6eaf8da5fa..17feff174f57 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -33,7 +33,7 @@ config SCSI
Channel, and FireWire storage.
To compile this driver as a module, choose M here and read
- <file:Documentation/scsi/scsi.txt>.
+ <file:Documentation/scsi/scsi.rst>.
The module will be called scsi_mod.
However, do not compile this as a module if your root file system
@@ -79,7 +79,7 @@ config BLK_DEV_SD
CD-ROMs.
To compile this driver as a module, choose M here and read
- <file:Documentation/scsi/scsi.txt>.
+ <file:Documentation/scsi/scsi.rst>.
The module will be called sd_mod.
Do not compile this driver as a module if your root file system
@@ -94,11 +94,11 @@ config CHR_DEV_ST
If you want to use a SCSI tape drive under Linux, say Y and read the
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, and
- <file:Documentation/scsi/st.txt> in the kernel source. This is NOT
+ <file:Documentation/scsi/st.rst> in the kernel source. This is NOT
for SCSI CD-ROMs.
To compile this driver as a module, choose M here and read
- <file:Documentation/scsi/scsi.txt>. The module will be called st.
+ <file:Documentation/scsi/scsi.rst>. The module will be called st.
config BLK_DEV_SR
tristate "SCSI CDROM support"
@@ -112,18 +112,9 @@ config BLK_DEV_SR
Make sure to say Y or M to "ISO 9660 CD-ROM file system support".
To compile this driver as a module, choose M here and read
- <file:Documentation/scsi/scsi.txt>.
+ <file:Documentation/scsi/scsi.rst>.
The module will be called sr_mod.
-config BLK_DEV_SR_VENDOR
- bool "Enable vendor-specific extensions (for SCSI CDROM)"
- depends on BLK_DEV_SR
- help
- This enables the usage of vendor specific SCSI commands. This is
- required to support multisession CDs with old NEC/TOSHIBA cdrom
- drives (and HP Writers). If you have such a drive and get the first
- session only, try saying Y here; everybody else says N.
-
config CHR_DEV_SG
tristate "SCSI generic support"
depends on SCSI
@@ -142,10 +133,10 @@ config CHR_DEV_SG
quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
For other devices, it's possible that you'll have to write the
driver software yourself. Please read the file
- <file:Documentation/scsi/scsi-generic.txt> for more information.
+ <file:Documentation/scsi/scsi-generic.rst> for more information.
To compile this driver as a module, choose M here and read
- <file:Documentation/scsi/scsi.txt>. The module will be called sg.
+ <file:Documentation/scsi/scsi.rst>. The module will be called sg.
If unsure, say N.
@@ -158,12 +149,12 @@ config CHR_DEV_SCH
don't need this for those tiny 6-slot cdrom changers. Media
changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
If you have such hardware and want to use it with linux, say Y
- here. Check <file:Documentation/scsi/scsi-changer.txt> for details.
+ here. Check <file:Documentation/scsi/scsi-changer.rst> for details.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.rst> and
- <file:Documentation/scsi/scsi.txt>. The module will be called ch.o.
+ <file:Documentation/scsi/scsi.rst>. The module will be called ch.o.
If unsure, say N.
config SCSI_ENCLOSURE
@@ -392,7 +383,7 @@ config SCSI_AHA152X
It is explained in section 3.3 of the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. You might also want to
- read the file <file:Documentation/scsi/aha152x.txt>.
+ read the file <file:Documentation/scsi/aha152x.rst>.
To compile this driver as a module, choose M here: the
module will be called aha152x.
@@ -430,7 +421,7 @@ config SCSI_AACRAID
help
This driver supports a variety of Dell, HP, Adaptec, IBM and
ICP storage products. For a list of supported products, refer
- to <file:Documentation/scsi/aacraid.txt>.
+ to <file:Documentation/scsi/aacraid.rst>.
To compile this driver as a module, choose M here: the module
will be called aacraid.
@@ -457,7 +448,7 @@ config SCSI_DPT_I2O
help
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
- driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>.
+ driver by Deanna Bonds. See <file:Documentation/scsi/dpti.rst>.
To compile this driver as a module, choose M here: the
module will be called dpt_i2o.
@@ -511,8 +502,8 @@ config SCSI_BUSLOGIC
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, and the files
- <file:Documentation/scsi/BusLogic.txt> and
- <file:Documentation/scsi/FlashPoint.txt> for more information.
+ <file:Documentation/scsi/BusLogic.rst> and
+ <file:Documentation/scsi/FlashPoint.rst> for more information.
Note that support for FlashPoint is only available for 32-bit
x86 configurations.
@@ -613,7 +604,7 @@ config FCOE_FNIC
This is support for the Cisco PCI-Express FCoE HBA.
To compile this driver as a module, choose M here and read
- <file:Documentation/scsi/scsi.txt>.
+ <file:Documentation/scsi/scsi.rst>.
The module will be called fnic.
config SCSI_SNIC
@@ -623,7 +614,7 @@ config SCSI_SNIC
This is support for the Cisco PCI-Express SCSI HBA.
To compile this driver as a module, choose M here and read
- <file:Documentation/scsi/scsi.txt>.
+ <file:Documentation/scsi/scsi.rst>.
The module will be called snic.
config SCSI_SNIC_DEBUG_FS
@@ -813,7 +804,7 @@ config SCSI_PPA
newer drives)", below.
For more information about this driver and how to use it you should
- read the file <file:Documentation/scsi/ppa.txt>. You should also read
+ read the file <file:Documentation/scsi/ppa.rst>. You should also read
the SCSI-HOWTO, which is available from
<http://www.tldp.org/docs.html#howto>. If you use this driver,
you will still be able to use the parallel port for other tasks,
@@ -840,7 +831,7 @@ config SCSI_IMM
here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
For more information about this driver and how to use it you should
- read the file <file:Documentation/scsi/ppa.txt>. You should also read
+ read the file <file:Documentation/scsi/ppa.rst>. You should also read
the SCSI-HOWTO, which is available from
<http://www.tldp.org/docs.html#howto>. If you use this driver,
you will still be able to use the parallel port for other tasks,
@@ -930,7 +921,7 @@ config SCSI_SYM53C8XX_2
language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI
controllers; you need to use the Fusion MPT driver for that.
- Please read <file:Documentation/scsi/sym53c8xx_2.txt> for more
+ Please read <file:Documentation/scsi/sym53c8xx_2.rst> for more
information.
config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
@@ -1127,7 +1118,7 @@ config SCSI_QLOGIC_FAS
SCSI support"), below.
Information about this driver is contained in
- <file:Documentation/scsi/qlogicfas.txt>. You should also read the
+ <file:Documentation/scsi/qlogicfas.rst>. You should also read the
SCSI-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
@@ -1197,7 +1188,7 @@ config SCSI_DC395x
This driver works, but is still in experimental status. So better
have a bootable disk and a backup in case of emergency.
- Documentation can be found in <file:Documentation/scsi/dc395x.txt>.
+ Documentation can be found in <file:Documentation/scsi/dc395x.rst>.
To compile this driver as a module, choose M here: the
module will be called dc395x.