summaryrefslogtreecommitdiff
path: root/drivers/scsi/fdomain.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/fdomain.h')
-rw-r--r--drivers/scsi/fdomain.h114
1 files changed, 114 insertions, 0 deletions
diff --git a/drivers/scsi/fdomain.h b/drivers/scsi/fdomain.h
new file mode 100644
index 000000000000..6f63fc6b0d12
--- /dev/null
+++ b/drivers/scsi/fdomain.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#define FDOMAIN_REGION_SIZE 0x10
+#define FDOMAIN_BIOS_SIZE 0x2000
+
+enum {
+ in_arbitration = 0x02,
+ in_selection = 0x04,
+ in_other = 0x08,
+ disconnect = 0x10,
+ aborted = 0x20,
+ sent_ident = 0x40,
+};
+
+/* (@) = not present on TMC1800, (#) = not present on TMC1800 and TMC18C50 */
+#define REG_SCSI_DATA 0 /* R/W: SCSI Data (with ACK) */
+#define REG_BSTAT 1 /* R: SCSI Bus Status */
+#define BSTAT_BSY BIT(0) /* Busy */
+#define BSTAT_MSG BIT(1) /* Message */
+#define BSTAT_IO BIT(2) /* Input/Output */
+#define BSTAT_CMD BIT(3) /* Command/Data */
+#define BSTAT_REQ BIT(4) /* Request and Not Ack */
+#define BSTAT_SEL BIT(5) /* Select */
+#define BSTAT_ACK BIT(6) /* Acknowledge and Request */
+#define BSTAT_ATN BIT(7) /* Attention */
+#define REG_BCTL 1 /* W: SCSI Bus Control */
+#define BCTL_RST BIT(0) /* Bus Reset */
+#define BCTL_SEL BIT(1) /* Select */
+#define BCTL_BSY BIT(2) /* Busy */
+#define BCTL_ATN BIT(3) /* Attention */
+#define BCTL_IO BIT(4) /* Input/Output */
+#define BCTL_CMD BIT(5) /* Command/Data */
+#define BCTL_MSG BIT(6) /* Message */
+#define BCTL_BUSEN BIT(7) /* Enable bus drivers */
+#define REG_ASTAT 2 /* R: Adapter Status 1 */
+#define ASTAT_IRQ BIT(0) /* Interrupt active */
+#define ASTAT_ARB BIT(1) /* Arbitration complete */
+#define ASTAT_PARERR BIT(2) /* Parity error */
+#define ASTAT_RST BIT(3) /* SCSI reset occurred */
+#define ASTAT_FIFODIR BIT(4) /* FIFO direction */
+#define ASTAT_FIFOEN BIT(5) /* FIFO enabled */
+#define ASTAT_PAREN BIT(6) /* Parity enabled */
+#define ASTAT_BUSEN BIT(7) /* Bus drivers enabled */
+#define REG_ICTL 2 /* W: Interrupt Control */
+#define ICTL_FIFO_MASK 0x0f /* FIFO threshold, 1/16 FIFO size */
+#define ICTL_FIFO BIT(4) /* Int. on FIFO count */
+#define ICTL_ARB BIT(5) /* Int. on Arbitration complete */
+#define ICTL_SEL BIT(6) /* Int. on SCSI Select */
+#define ICTL_REQ BIT(7) /* Int. on SCSI Request */
+#define REG_FSTAT 3 /* R: Adapter Status 2 (FIFO) - (@) */
+#define FSTAT_ONOTEMPTY BIT(0) /* Output FIFO not empty */
+#define FSTAT_INOTEMPTY BIT(1) /* Input FIFO not empty */
+#define FSTAT_NOTEMPTY BIT(2) /* Main FIFO not empty */
+#define FSTAT_NOTFULL BIT(3) /* Main FIFO not full */
+#define REG_MCTL 3 /* W: SCSI Data Mode Control */
+#define MCTL_ACK_MASK 0x0f /* Acknowledge period */
+#define MCTL_ACTDEASS BIT(4) /* Active deassert of REQ and ACK */
+#define MCTL_TARGET BIT(5) /* Enable target mode */
+#define MCTL_FASTSYNC BIT(6) /* Enable Fast Synchronous */
+#define MCTL_SYNC BIT(7) /* Enable Synchronous */
+#define REG_INTCOND 4 /* R: Interrupt Condition - (@) */
+#define IRQ_FIFO BIT(1) /* FIFO interrupt */
+#define IRQ_REQ BIT(2) /* SCSI Request interrupt */
+#define IRQ_SEL BIT(3) /* SCSI Select interrupt */
+#define IRQ_ARB BIT(4) /* SCSI Arbitration interrupt */
+#define IRQ_RST BIT(5) /* SCSI Reset interrupt */
+#define IRQ_FORCED BIT(6) /* Forced interrupt */
+#define IRQ_TIMEOUT BIT(7) /* Bus timeout */
+#define REG_ACTL 4 /* W: Adapter Control 1 */
+#define ACTL_RESET BIT(0) /* Reset FIFO, parity, reset int. */
+#define ACTL_FIRQ BIT(1) /* Set Forced interrupt */
+#define ACTL_ARB BIT(2) /* Initiate Bus Arbitration */
+#define ACTL_PAREN BIT(3) /* Enable SCSI Parity */
+#define ACTL_IRQEN BIT(4) /* Enable interrupts */
+#define ACTL_CLRFIRQ BIT(5) /* Clear Forced interrupt */
+#define ACTL_FIFOWR BIT(6) /* FIFO Direction (1=write) */
+#define ACTL_FIFOEN BIT(7) /* Enable FIFO */
+#define REG_ID_LSB 5 /* R: ID Code (LSB) */
+#define REG_ACTL2 5 /* Adapter Control 2 - (@) */
+#define ACTL2_RAMOVRLY BIT(0) /* Enable RAM overlay */
+#define ACTL2_SLEEP BIT(7) /* Sleep mode */
+#define REG_ID_MSB 6 /* R: ID Code (MSB) */
+#define REG_LOOPBACK 7 /* R/W: Loopback */
+#define REG_SCSI_DATA_NOACK 8 /* R/W: SCSI Data (no ACK) */
+#define REG_ASTAT3 9 /* R: Adapter Status 3 */
+#define ASTAT3_ACTDEASS BIT(0) /* Active deassert enabled */
+#define ASTAT3_RAMOVRLY BIT(1) /* RAM overlay enabled */
+#define ASTAT3_TARGERR BIT(2) /* Target error */
+#define ASTAT3_IRQEN BIT(3) /* Interrupts enabled */
+#define ASTAT3_IRQMASK 0xf0 /* Enabled interrupts mask */
+#define REG_CFG1 10 /* R: Configuration Register 1 */
+#define CFG1_BUS BIT(0) /* 0 = ISA */
+#define CFG1_IRQ_MASK 0x0e /* IRQ jumpers */
+#define CFG1_IO_MASK 0x30 /* I/O base jumpers */
+#define CFG1_BIOS_MASK 0xc0 /* BIOS base jumpers */
+#define REG_CFG2 11 /* R/W: Configuration Register 2 (@) */
+#define CFG2_ROMDIS BIT(0) /* ROM disabled */
+#define CFG2_RAMDIS BIT(1) /* RAM disabled */
+#define CFG2_IRQEDGE BIT(2) /* Edge-triggered interrupts */
+#define CFG2_NOWS BIT(3) /* No wait states */
+#define CFG2_32BIT BIT(7) /* 32-bit mode */
+#define REG_FIFO 12 /* R/W: FIFO */
+#define REG_FIFO_COUNT 14 /* R: FIFO Data Count */
+
+#ifdef CONFIG_PM_SLEEP
+static const struct dev_pm_ops fdomain_pm_ops;
+#define FDOMAIN_PM_OPS (&fdomain_pm_ops)
+#else
+#define FDOMAIN_PM_OPS NULL
+#endif /* CONFIG_PM_SLEEP */
+
+struct Scsi_Host *fdomain_create(int base, int irq, int this_id,
+ struct device *dev);
+int fdomain_destroy(struct Scsi_Host *sh);