diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_sli.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 178 |
1 files changed, 178 insertions, 0 deletions
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index b42c2dc49c83..4d1c190823d1 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -1769,6 +1769,184 @@ lpfc_sli_ringtx_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring) } /** + * lpfc_cmf_sync_cmpl - Process a CMF_SYNC_WQE cmpl + * @phba: Pointer to HBA context object. + * @cmdiocb: Pointer to driver command iocb object. + * @cmf_cmpl: Pointer to completed WCQE. + * + * This routine will inform the driver of any BW adjustments we need + * to make. These changes will be picked up during the next CMF + * timer interrupt. In addition, any BW changes will be logged + * with LOG_CGN_MGMT. + **/ +static void +lpfc_cmf_sync_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, + struct lpfc_wcqe_complete *cmf_cmpl) +{ + union lpfc_wqe128 *wqe; + uint32_t status, info; + uint64_t bw; + int asig, afpin, sigcnt, fpincnt; + int cg, tdp; + + /* First check for error */ + status = bf_get(lpfc_wcqe_c_status, cmf_cmpl); + if (status) { + lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, + "6211 CMF_SYNC_WQE Error " + "req_tag x%x status x%x hwstatus x%x " + "tdatap x%x parm x%x\n", + bf_get(lpfc_wcqe_c_request_tag, cmf_cmpl), + bf_get(lpfc_wcqe_c_status, cmf_cmpl), + bf_get(lpfc_wcqe_c_hw_status, cmf_cmpl), + cmf_cmpl->total_data_placed, + cmf_cmpl->parameter); + goto out; + } + + /* Gather congestion information on a successful cmpl */ + info = cmf_cmpl->parameter; + tdp = bf_get(lpfc_wcqe_c_cmf_bw, cmf_cmpl); + cg = bf_get(lpfc_wcqe_c_cmf_cg, cmf_cmpl); + + /* Get BW requirement from firmware */ + bw = (uint64_t)tdp * LPFC_CMF_BLK_SIZE; + if (!bw) { + lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, + "6212 CMF_SYNC_WQE x%x: NULL bw\n", + bf_get(lpfc_wcqe_c_request_tag, cmf_cmpl)); + goto out; + } + + /* Gather information needed for logging if a BW change is required */ + wqe = &cmdiocb->wqe; + asig = bf_get(cmf_sync_asig, &wqe->cmf_sync); + afpin = bf_get(cmf_sync_afpin, &wqe->cmf_sync); + fpincnt = bf_get(cmf_sync_wfpincnt, &wqe->cmf_sync); + sigcnt = bf_get(cmf_sync_wsigcnt, &wqe->cmf_sync); + +out: + lpfc_sli_release_iocbq(phba, cmdiocb); +} + +/** + * lpfc_issue_cmf_sync_wqe - Issue a CMF_SYNC_WQE + * @phba: Pointer to HBA context object. + * @ms: ms to set in WQE interval, 0 means use init op + * @total: Total rcv bytes for this interval + * + * This routine is called every CMF timer interrupt. Its purpose is + * to issue a CMF_SYNC_WQE to the firmware to inform it of any events + * that may indicate we have congestion (FPINs or Signals). Upon + * completion, the firmware will indicate any BW restrictions the + * driver may need to take. + **/ +int +lpfc_issue_cmf_sync_wqe(struct lpfc_hba *phba, u32 ms, u64 total) +{ + union lpfc_wqe128 *wqe; + struct lpfc_iocbq *sync_buf; + unsigned long iflags; + u32 ret_val; + u32 atot, wtot, max; + + /* First address any alarm / warning activity */ + atot = atomic_xchg(&phba->cgn_sync_alarm_cnt, 0); + wtot = atomic_xchg(&phba->cgn_sync_warn_cnt, 0); + + /* ONLY Managed mode will send the CMF_SYNC_WQE to the HBA */ + if (phba->cmf_active_mode != LPFC_CFG_MANAGED || + phba->link_state == LPFC_LINK_DOWN) + return 0; + + spin_lock_irqsave(&phba->hbalock, iflags); + sync_buf = __lpfc_sli_get_iocbq(phba); + if (!sync_buf) { + lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT, + "6213 No available WQEs for CMF_SYNC_WQE\n"); + ret_val = ENOMEM; + goto out_unlock; + } + + wqe = &sync_buf->wqe; + + /* WQEs are reused. Clear stale data and set key fields to zero */ + memset(wqe, 0, sizeof(*wqe)); + + /* If this is the very first CMF_SYNC_WQE, issue an init operation */ + if (!ms) { + lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, + "6441 CMF Init %d - CMF_SYNC_WQE\n", + phba->fc_eventTag); + bf_set(cmf_sync_op, &wqe->cmf_sync, 1); /* 1=init */ + bf_set(cmf_sync_interval, &wqe->cmf_sync, LPFC_CMF_INTERVAL); + goto initpath; + } + + bf_set(cmf_sync_op, &wqe->cmf_sync, 0); /* 0=recalc */ + bf_set(cmf_sync_interval, &wqe->cmf_sync, ms); + + /* Check for alarms / warnings */ + if (atot) { + if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) { + /* We hit an Signal alarm condition */ + bf_set(cmf_sync_asig, &wqe->cmf_sync, 1); + } else { + /* We hit a FPIN alarm condition */ + bf_set(cmf_sync_afpin, &wqe->cmf_sync, 1); + } + } else if (wtot) { + if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ONLY || + phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) { + /* We hit an Signal warning condition */ + max = LPFC_SEC_TO_MSEC / lpfc_fabric_cgn_frequency * + lpfc_acqe_cgn_frequency; + bf_set(cmf_sync_wsigmax, &wqe->cmf_sync, max); + bf_set(cmf_sync_wsigcnt, &wqe->cmf_sync, wtot); + } else { + /* We hit a FPIN warning condition */ + bf_set(cmf_sync_wfpinmax, &wqe->cmf_sync, 1); + bf_set(cmf_sync_wfpincnt, &wqe->cmf_sync, 1); + } + } + + /* Update total read blocks during previous timer interval */ + wqe->cmf_sync.read_bytes = (u32)(total / LPFC_CMF_BLK_SIZE); + +initpath: + bf_set(cmf_sync_ver, &wqe->cmf_sync, LPFC_CMF_SYNC_VER); + wqe->cmf_sync.event_tag = phba->fc_eventTag; + bf_set(cmf_sync_cmnd, &wqe->cmf_sync, CMD_CMF_SYNC_WQE); + + /* Setup reqtag to match the wqe completion. */ + bf_set(cmf_sync_reqtag, &wqe->cmf_sync, sync_buf->iotag); + + bf_set(cmf_sync_qosd, &wqe->cmf_sync, 1); + + bf_set(cmf_sync_cmd_type, &wqe->cmf_sync, CMF_SYNC_COMMAND); + bf_set(cmf_sync_wqec, &wqe->cmf_sync, 1); + bf_set(cmf_sync_cqid, &wqe->cmf_sync, LPFC_WQE_CQ_ID_DEFAULT); + + sync_buf->vport = phba->pport; + sync_buf->wqe_cmpl = lpfc_cmf_sync_cmpl; + sync_buf->iocb_cmpl = NULL; + sync_buf->context1 = NULL; + sync_buf->context2 = NULL; + sync_buf->context3 = NULL; + sync_buf->sli4_xritag = NO_XRI; + + sync_buf->iocb_flag |= LPFC_IO_CMF; + ret_val = lpfc_sli4_issue_wqe(phba, &phba->sli4_hba.hdwq[0], sync_buf); + if (ret_val) + lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, + "6214 Cannot issue CMF_SYNC_WQE: x%x\n", + ret_val); +out_unlock: + spin_unlock_irqrestore(&phba->hbalock, iflags); + return ret_val; +} + +/** * lpfc_sli_next_iocb_slot - Get next iocb slot in the ring * @phba: Pointer to HBA context object. * @pring: Pointer to driver SLI ring object. |