summaryrefslogtreecommitdiff
path: root/drivers/serial/serial_cs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial/serial_cs.c')
-rw-r--r--drivers/serial/serial_cs.c747
1 files changed, 747 insertions, 0 deletions
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
new file mode 100644
index 000000000000..9034f9ad37c7
--- /dev/null
+++ b/drivers/serial/serial_cs.c
@@ -0,0 +1,747 @@
+/*======================================================================
+
+ A driver for PCMCIA serial devices
+
+ serial_cs.c 1.134 2002/05/04 05:48:53
+
+ The contents of this file are subject to the Mozilla Public
+ License Version 1.1 (the "License"); you may not use this file
+ except in compliance with the License. You may obtain a copy of
+ the License at http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS
+ IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ implied. See the License for the specific language governing
+ rights and limitations under the License.
+
+ The initial developer of the original code is David A. Hinds
+ <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+
+ Alternatively, the contents of this file may be used under the
+ terms of the GNU General Public License version 2 (the "GPL"), in which
+ case the provisions of the GPL are applicable instead of the
+ above. If you wish to allow the use of your version of this file
+ only under the terms of the GPL and not to allow others to use
+ your version of this file under the MPL, indicate your decision
+ by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL. If you do not delete
+ the provisions above, a recipient may use your version of this
+ file under either the MPL or the GPL.
+
+======================================================================*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/serial_core.h>
+#include <linux/major.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/cisreg.h>
+
+#include "8250.h"
+
+#ifdef PCMCIA_DEBUG
+static int pc_debug = PCMCIA_DEBUG;
+module_param(pc_debug, int, 0644);
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
+static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
+#else
+#define DEBUG(n, args...)
+#endif
+
+/*====================================================================*/
+
+/* Parameters that can be set with 'insmod' */
+
+/* Enable the speaker? */
+static int do_sound = 1;
+/* Skip strict UART tests? */
+static int buggy_uart;
+
+module_param(do_sound, int, 0444);
+module_param(buggy_uart, int, 0444);
+
+/*====================================================================*/
+
+/* Table of multi-port card ID's */
+
+struct multi_id {
+ u_short manfid;
+ u_short prodid;
+ int multi; /* 1 = multifunction, > 1 = # ports */
+};
+
+static struct multi_id multi_id[] = {
+ { MANFID_OMEGA, PRODID_OMEGA_QSP_100, 4 },
+ { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232, 2 },
+ { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232_D1, 2 },
+ { MANFID_QUATECH, PRODID_QUATECH_QUAD_RS232, 4 },
+ { MANFID_SOCKET, PRODID_SOCKET_DUAL_RS232, 2 },
+ { MANFID_INTEL, PRODID_INTEL_DUAL_RS232, 2 },
+ { MANFID_NATINST, PRODID_NATINST_QUAD_RS232, 4 }
+};
+#define MULTI_COUNT (sizeof(multi_id)/sizeof(struct multi_id))
+
+struct serial_info {
+ dev_link_t link;
+ int ndev;
+ int multi;
+ int slave;
+ int manfid;
+ dev_node_t node[4];
+ int line[4];
+};
+
+static void serial_config(dev_link_t * link);
+static int serial_event(event_t event, int priority,
+ event_callback_args_t * args);
+
+static dev_info_t dev_info = "serial_cs";
+
+static dev_link_t *serial_attach(void);
+static void serial_detach(dev_link_t *);
+
+static dev_link_t *dev_list = NULL;
+
+/*======================================================================
+
+ After a card is removed, serial_remove() will unregister
+ the serial device(s), and release the PCMCIA configuration.
+
+======================================================================*/
+
+static void serial_remove(dev_link_t *link)
+{
+ struct serial_info *info = link->priv;
+ int i;
+
+ link->state &= ~DEV_PRESENT;
+
+ DEBUG(0, "serial_release(0x%p)\n", link);
+
+ /*
+ * Recheck to see if the device is still configured.
+ */
+ if (info->link.state & DEV_CONFIG) {
+ for (i = 0; i < info->ndev; i++)
+ serial8250_unregister_port(info->line[i]);
+
+ info->link.dev = NULL;
+
+ if (!info->slave) {
+ pcmcia_release_configuration(info->link.handle);
+ pcmcia_release_io(info->link.handle, &info->link.io);
+ pcmcia_release_irq(info->link.handle, &info->link.irq);
+ }
+
+ info->link.state &= ~DEV_CONFIG;
+ }
+}
+
+static void serial_suspend(dev_link_t *link)
+{
+ link->state |= DEV_SUSPEND;
+
+ if (link->state & DEV_CONFIG) {
+ struct serial_info *info = link->priv;
+ int i;
+
+ for (i = 0; i < info->ndev; i++)
+ serial8250_suspend_port(info->line[i]);
+
+ if (!info->slave)
+ pcmcia_release_configuration(link->handle);
+ }
+}
+
+static void serial_resume(dev_link_t *link)
+{
+ link->state &= ~DEV_SUSPEND;
+
+ if (DEV_OK(link)) {
+ struct serial_info *info = link->priv;
+ int i;
+
+ if (!info->slave)
+ pcmcia_request_configuration(link->handle, &link->conf);
+
+ for (i = 0; i < info->ndev; i++)
+ serial8250_resume_port(info->line[i]);
+ }
+}
+
+/*======================================================================
+
+ serial_attach() creates an "instance" of the driver, allocating
+ local data structures for one device. The device is registered
+ with Card Services.
+
+======================================================================*/
+
+static dev_link_t *serial_attach(void)
+{
+ struct serial_info *info;
+ client_reg_t client_reg;
+ dev_link_t *link;
+ int ret;
+
+ DEBUG(0, "serial_attach()\n");
+
+ /* Create new serial device */
+ info = kmalloc(sizeof (*info), GFP_KERNEL);
+ if (!info)
+ return NULL;
+ memset(info, 0, sizeof (*info));
+ link = &info->link;
+ link->priv = info;
+
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ link->io.NumPorts1 = 8;
+ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->conf.Attributes = CONF_ENABLE_IRQ;
+ if (do_sound) {
+ link->conf.Attributes |= CONF_ENABLE_SPKR;
+ link->conf.Status = CCSR_AUDIO_ENA;
+ }
+ link->conf.IntType = INT_MEMORY_AND_IO;
+
+ /* Register with Card Services */
+ link->next = dev_list;
+ dev_list = link;
+ client_reg.dev_info = &dev_info;
+ client_reg.EventMask =
+ CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+ CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+ CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+ client_reg.event_handler = &serial_event;
+ client_reg.Version = 0x0210;
+ client_reg.event_callback_args.client_data = link;
+ ret = pcmcia_register_client(&link->handle, &client_reg);
+ if (ret != CS_SUCCESS) {
+ cs_error(link->handle, RegisterClient, ret);
+ serial_detach(link);
+ return NULL;
+ }
+
+ return link;
+}
+
+/*======================================================================
+
+ This deletes a driver "instance". The device is de-registered
+ with Card Services. If it has been released, all local data
+ structures are freed. Otherwise, the structures will be freed
+ when the device is released.
+
+======================================================================*/
+
+static void serial_detach(dev_link_t * link)
+{
+ struct serial_info *info = link->priv;
+ dev_link_t **linkp;
+ int ret;
+
+ DEBUG(0, "serial_detach(0x%p)\n", link);
+
+ /* Locate device structure */
+ for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+ if (*linkp == link)
+ break;
+ if (*linkp == NULL)
+ return;
+
+ /*
+ * Ensure any outstanding scheduled tasks are completed.
+ */
+ flush_scheduled_work();
+
+ /*
+ * Ensure that the ports have been released.
+ */
+ serial_remove(link);
+
+ if (link->handle) {
+ ret = pcmcia_deregister_client(link->handle);
+ if (ret != CS_SUCCESS)
+ cs_error(link->handle, DeregisterClient, ret);
+ }
+
+ /* Unlink device structure, free bits */
+ *linkp = link->next;
+ kfree(info);
+}
+
+/*====================================================================*/
+
+static int setup_serial(client_handle_t handle, struct serial_info * info,
+ kio_addr_t iobase, int irq)
+{
+ struct uart_port port;
+ int line;
+
+ memset(&port, 0, sizeof (struct uart_port));
+ port.iobase = iobase;
+ port.irq = irq;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+ port.uartclk = 1843200;
+ port.dev = &handle_to_dev(handle);
+ if (buggy_uart)
+ port.flags |= UPF_BUGGY_UART;
+ line = serial8250_register_port(&port);
+ if (line < 0) {
+ printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
+ "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
+ return -EINVAL;
+ }
+
+ info->line[info->ndev] = line;
+ sprintf(info->node[info->ndev].dev_name, "ttyS%d", line);
+ info->node[info->ndev].major = TTY_MAJOR;
+ info->node[info->ndev].minor = 0x40 + line;
+ if (info->ndev > 0)
+ info->node[info->ndev - 1].next = &info->node[info->ndev];
+ info->ndev++;
+
+ return 0;
+}
+
+/*====================================================================*/
+
+static int
+first_tuple(client_handle_t handle, tuple_t * tuple, cisparse_t * parse)
+{
+ int i;
+ i = pcmcia_get_first_tuple(handle, tuple);
+ if (i != CS_SUCCESS)
+ return CS_NO_MORE_ITEMS;
+ i = pcmcia_get_tuple_data(handle, tuple);
+ if (i != CS_SUCCESS)
+ return i;
+ return pcmcia_parse_tuple(handle, tuple, parse);
+}
+
+static int
+next_tuple(client_handle_t handle, tuple_t * tuple, cisparse_t * parse)
+{
+ int i;
+ i = pcmcia_get_next_tuple(handle, tuple);
+ if (i != CS_SUCCESS)
+ return CS_NO_MORE_ITEMS;
+ i = pcmcia_get_tuple_data(handle, tuple);
+ if (i != CS_SUCCESS)
+ return i;
+ return pcmcia_parse_tuple(handle, tuple, parse);
+}
+
+/*====================================================================*/
+
+static int simple_config(dev_link_t *link)
+{
+ static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ static int size_table[2] = { 8, 16 };
+ client_handle_t handle = link->handle;
+ struct serial_info *info = link->priv;
+ tuple_t tuple;
+ u_char buf[256];
+ cisparse_t parse;
+ cistpl_cftable_entry_t *cf = &parse.cftable_entry;
+ config_info_t config;
+ int i, j, try;
+ int s;
+
+ /* If the card is already configured, look up the port and irq */
+ i = pcmcia_get_configuration_info(handle, &config);
+ if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
+ kio_addr_t port = 0;
+ if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
+ port = config.BasePort2;
+ info->slave = 1;
+ } else if ((info->manfid == MANFID_OSITECH) &&
+ (config.NumPorts1 == 0x40)) {
+ port = config.BasePort1 + 0x28;
+ info->slave = 1;
+ }
+ if (info->slave)
+ return setup_serial(handle, info, port, config.AssignedIRQ);
+ }
+ link->conf.Vcc = config.Vcc;
+
+ /* First pass: look for a config entry that looks normal. */
+ tuple.TupleData = (cisdata_t *) buf;
+ tuple.TupleOffset = 0;
+ tuple.TupleDataMax = 255;
+ tuple.Attributes = 0;
+ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+ /* Two tries: without IO aliases, then with aliases */
+ for (s = 0; s < 2; s++) {
+ for (try = 0; try < 2; try++) {
+ i = first_tuple(handle, &tuple, &parse);
+ while (i != CS_NO_MORE_ITEMS) {
+ if (i != CS_SUCCESS)
+ goto next_entry;
+ if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ link->conf.Vpp1 = link->conf.Vpp2 =
+ cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
+ (cf->io.win[0].base != 0)) {
+ link->conf.ConfigIndex = cf->index;
+ link->io.BasePort1 = cf->io.win[0].base;
+ link->io.IOAddrLines = (try == 0) ?
+ 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+ i = pcmcia_request_io(link->handle, &link->io);
+ if (i == CS_SUCCESS)
+ goto found_port;
+ }
+next_entry:
+ i = next_tuple(handle, &tuple, &parse);
+ }
+ }
+ }
+ /* Second pass: try to find an entry that isn't picky about
+ its base address, then try to grab any standard serial port
+ address, and finally try to get any free port. */
+ i = first_tuple(handle, &tuple, &parse);
+ while (i != CS_NO_MORE_ITEMS) {
+ if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
+ ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
+ link->conf.ConfigIndex = cf->index;
+ for (j = 0; j < 5; j++) {
+ link->io.BasePort1 = base[j];
+ link->io.IOAddrLines = base[j] ? 16 : 3;
+ i = pcmcia_request_io(link->handle, &link->io);
+ if (i == CS_SUCCESS)
+ goto found_port;
+ }
+ }
+ i = next_tuple(handle, &tuple, &parse);
+ }
+
+ found_port:
+ if (i != CS_SUCCESS) {
+ printk(KERN_NOTICE
+ "serial_cs: no usable port range found, giving up\n");
+ cs_error(link->handle, RequestIO, i);
+ return -1;
+ }
+
+ i = pcmcia_request_irq(link->handle, &link->irq);
+ if (i != CS_SUCCESS) {
+ cs_error(link->handle, RequestIRQ, i);
+ link->irq.AssignedIRQ = 0;
+ }
+ if (info->multi && (info->manfid == MANFID_3COM))
+ link->conf.ConfigIndex &= ~(0x08);
+ i = pcmcia_request_configuration(link->handle, &link->conf);
+ if (i != CS_SUCCESS) {
+ cs_error(link->handle, RequestConfiguration, i);
+ return -1;
+ }
+
+ return setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
+}
+
+static int multi_config(dev_link_t * link)
+{
+ client_handle_t handle = link->handle;
+ struct serial_info *info = link->priv;
+ tuple_t tuple;
+ u_char buf[256];
+ cisparse_t parse;
+ cistpl_cftable_entry_t *cf = &parse.cftable_entry;
+ config_info_t config;
+ int i, base2 = 0;
+
+ i = pcmcia_get_configuration_info(handle, &config);
+ if (i != CS_SUCCESS) {
+ cs_error(handle, GetConfigurationInfo, i);
+ return -1;
+ }
+ link->conf.Vcc = config.Vcc;
+
+ tuple.TupleData = (cisdata_t *) buf;
+ tuple.TupleOffset = 0;
+ tuple.TupleDataMax = 255;
+ tuple.Attributes = 0;
+ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+
+ /* First, look for a generic full-sized window */
+ link->io.NumPorts1 = info->multi * 8;
+ i = first_tuple(handle, &tuple, &parse);
+ while (i != CS_NO_MORE_ITEMS) {
+ /* The quad port cards have bad CIS's, so just look for a
+ window larger than 8 ports and assume it will be right */
+ if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
+ (cf->io.win[0].len > 8)) {
+ link->conf.ConfigIndex = cf->index;
+ link->io.BasePort1 = cf->io.win[0].base;
+ link->io.IOAddrLines =
+ cf->io.flags & CISTPL_IO_LINES_MASK;
+ i = pcmcia_request_io(link->handle, &link->io);
+ base2 = link->io.BasePort1 + 8;
+ if (i == CS_SUCCESS)
+ break;
+ }
+ i = next_tuple(handle, &tuple, &parse);
+ }
+
+ /* If that didn't work, look for two windows */
+ if (i != CS_SUCCESS) {
+ link->io.NumPorts1 = link->io.NumPorts2 = 8;
+ info->multi = 2;
+ i = first_tuple(handle, &tuple, &parse);
+ while (i != CS_NO_MORE_ITEMS) {
+ if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
+ link->conf.ConfigIndex = cf->index;
+ link->io.BasePort1 = cf->io.win[0].base;
+ link->io.BasePort2 = cf->io.win[1].base;
+ link->io.IOAddrLines =
+ cf->io.flags & CISTPL_IO_LINES_MASK;
+ i = pcmcia_request_io(link->handle, &link->io);
+ base2 = link->io.BasePort2;
+ if (i == CS_SUCCESS)
+ break;
+ }
+ i = next_tuple(handle, &tuple, &parse);
+ }
+ }
+
+ if (i != CS_SUCCESS) {
+ cs_error(link->handle, RequestIO, i);
+ return -1;
+ }
+
+ i = pcmcia_request_irq(link->handle, &link->irq);
+ if (i != CS_SUCCESS) {
+ printk(KERN_NOTICE
+ "serial_cs: no usable port range found, giving up\n");
+ cs_error(link->handle, RequestIRQ, i);
+ link->irq.AssignedIRQ = 0;
+ }
+ /* Socket Dual IO: this enables irq's for second port */
+ if (info->multi && (info->manfid == MANFID_SOCKET)) {
+ link->conf.Present |= PRESENT_EXT_STATUS;
+ link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
+ }
+ i = pcmcia_request_configuration(link->handle, &link->conf);
+ if (i != CS_SUCCESS) {
+ cs_error(link->handle, RequestConfiguration, i);
+ return -1;
+ }
+
+ /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
+ 8 registers are for the UART, the others are extra registers */
+ if (info->manfid == MANFID_OXSEMI) {
+ if (cf->index == 1 || cf->index == 3) {
+ setup_serial(handle, info, base2, link->irq.AssignedIRQ);
+ outb(12, link->io.BasePort1 + 1);
+ } else {
+ setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
+ outb(12, base2 + 1);
+ }
+ return 0;
+ }
+
+ setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
+ /* The Nokia cards are not really multiport cards */
+ if (info->manfid == MANFID_NOKIA)
+ return 0;
+ for (i = 0; i < info->multi - 1; i++)
+ setup_serial(handle, info, base2 + (8 * i), link->irq.AssignedIRQ);
+
+ return 0;
+}
+
+/*======================================================================
+
+ serial_config() is scheduled to run after a CARD_INSERTION event
+ is received, to configure the PCMCIA socket, and to make the
+ serial device available to the system.
+
+======================================================================*/
+
+void serial_config(dev_link_t * link)
+{
+ client_handle_t handle = link->handle;
+ struct serial_info *info = link->priv;
+ tuple_t tuple;
+ u_short buf[128];
+ cisparse_t parse;
+ cistpl_cftable_entry_t *cf = &parse.cftable_entry;
+ int i, last_ret, last_fn;
+
+ DEBUG(0, "serial_config(0x%p)\n", link);
+
+ tuple.TupleData = (cisdata_t *) buf;
+ tuple.TupleOffset = 0;
+ tuple.TupleDataMax = 255;
+ tuple.Attributes = 0;
+ /* Get configuration register information */
+ tuple.DesiredTuple = CISTPL_CONFIG;
+ last_ret = first_tuple(handle, &tuple, &parse);
+ if (last_ret != CS_SUCCESS) {
+ last_fn = ParseTuple;
+ goto cs_failed;
+ }
+ link->conf.ConfigBase = parse.config.base;
+ link->conf.Present = parse.config.rmask[0];
+
+ /* Configure card */
+ link->state |= DEV_CONFIG;
+
+ /* Is this a compliant multifunction card? */
+ tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
+ tuple.Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
+ info->multi = (first_tuple(handle, &tuple, &parse) == CS_SUCCESS);
+
+ /* Is this a multiport card? */
+ tuple.DesiredTuple = CISTPL_MANFID;
+ if (first_tuple(handle, &tuple, &parse) == CS_SUCCESS) {
+ info->manfid = le16_to_cpu(buf[0]);
+ for (i = 0; i < MULTI_COUNT; i++)
+ if ((info->manfid == multi_id[i].manfid) &&
+ (le16_to_cpu(buf[1]) == multi_id[i].prodid))
+ break;
+ if (i < MULTI_COUNT)
+ info->multi = multi_id[i].multi;
+ }
+
+ /* Another check for dual-serial cards: look for either serial or
+ multifunction cards that ask for appropriate IO port ranges */
+ tuple.DesiredTuple = CISTPL_FUNCID;
+ if ((info->multi == 0) &&
+ ((first_tuple(handle, &tuple, &parse) != CS_SUCCESS) ||
+ (parse.funcid.func == CISTPL_FUNCID_MULTI) ||
+ (parse.funcid.func == CISTPL_FUNCID_SERIAL))) {
+ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+ if (first_tuple(handle, &tuple, &parse) == CS_SUCCESS) {
+ if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
+ info->multi = cf->io.win[0].len >> 3;
+ if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
+ (cf->io.win[1].len == 8))
+ info->multi = 2;
+ }
+ }
+
+ if (info->multi > 1)
+ multi_config(link);
+ else
+ simple_config(link);
+
+ if (info->ndev == 0)
+ goto failed;
+
+ if (info->manfid == MANFID_IBM) {
+ conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
+ last_ret = pcmcia_access_configuration_register(link->handle, &reg);
+ if (last_ret) {
+ last_fn = AccessConfigurationRegister;
+ goto cs_failed;
+ }
+ reg.Action = CS_WRITE;
+ reg.Value = reg.Value | 1;
+ last_ret = pcmcia_access_configuration_register(link->handle, &reg);
+ if (last_ret) {
+ last_fn = AccessConfigurationRegister;
+ goto cs_failed;
+ }
+ }
+
+ link->dev = &info->node[0];
+ link->state &= ~DEV_CONFIG_PENDING;
+ return;
+
+ cs_failed:
+ cs_error(link->handle, last_fn, last_ret);
+ failed:
+ serial_remove(link);
+ link->state &= ~DEV_CONFIG_PENDING;
+}
+
+/*======================================================================
+
+ The card status event handler. Mostly, this schedules other
+ stuff to run after an event is received. A CARD_REMOVAL event
+ also sets some flags to discourage the serial drivers from
+ talking to the ports.
+
+======================================================================*/
+
+static int
+serial_event(event_t event, int priority, event_callback_args_t * args)
+{
+ dev_link_t *link = args->client_data;
+ struct serial_info *info = link->priv;
+
+ DEBUG(1, "serial_event(0x%06x)\n", event);
+
+ switch (event) {
+ case CS_EVENT_CARD_REMOVAL:
+ serial_remove(link);
+ break;
+
+ case CS_EVENT_CARD_INSERTION:
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ serial_config(link);
+ break;
+
+ case CS_EVENT_PM_SUSPEND:
+ serial_suspend(link);
+ break;
+
+ case CS_EVENT_RESET_PHYSICAL:
+ if ((link->state & DEV_CONFIG) && !info->slave)
+ pcmcia_release_configuration(link->handle);
+ break;
+
+ case CS_EVENT_PM_RESUME:
+ serial_resume(link);
+ break;
+
+ case CS_EVENT_CARD_RESET:
+ if (DEV_OK(link) && !info->slave)
+ pcmcia_request_configuration(link->handle, &link->conf);
+ break;
+ }
+ return 0;
+}
+
+static struct pcmcia_driver serial_cs_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = "serial_cs",
+ },
+ .attach = serial_attach,
+ .detach = serial_detach,
+};
+
+static int __init init_serial_cs(void)
+{
+ return pcmcia_register_driver(&serial_cs_driver);
+}
+
+static void __exit exit_serial_cs(void)
+{
+ pcmcia_unregister_driver(&serial_cs_driver);
+ BUG_ON(dev_list != NULL);
+}
+
+module_init(init_serial_cs);
+module_exit(exit_serial_cs);
+
+MODULE_LICENSE("GPL");