diff options
Diffstat (limited to 'drivers/soc/bcm/brcmstb/pm/pm-arm.c')
| -rw-r--r-- | drivers/soc/bcm/brcmstb/pm/pm-arm.c | 822 |
1 files changed, 822 insertions, 0 deletions
diff --git a/drivers/soc/bcm/brcmstb/pm/pm-arm.c b/drivers/soc/bcm/brcmstb/pm/pm-arm.c new file mode 100644 index 000000000000..dcf8c8065508 --- /dev/null +++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c @@ -0,0 +1,822 @@ +/* + * ARM-specific support for Broadcom STB S2/S3/S5 power management + * + * S2: clock gate CPUs and as many peripherals as possible + * S3: power off all of the chip except the Always ON (AON) island; keep DDR is + * self-refresh + * S5: (a.k.a. S3 cold boot) much like S3, except DDR is powered down, so we + * treat this mode like a soft power-off, with wakeup allowed from AON + * + * Copyright © 2014-2017 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define pr_fmt(fmt) "brcmstb-pm: " fmt + +#include <linux/bitops.h> +#include <linux/compiler.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/kconfig.h> +#include <linux/kernel.h> +#include <linux/memblock.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/printk.h> +#include <linux/proc_fs.h> +#include <linux/sizes.h> +#include <linux/slab.h> +#include <linux/sort.h> +#include <linux/suspend.h> +#include <linux/types.h> +#include <linux/uaccess.h> +#include <linux/soc/brcmstb/brcmstb.h> + +#include <asm/fncpy.h> +#include <asm/setup.h> +#include <asm/suspend.h> + +#include "pm.h" +#include "aon_defs.h" + +#define SHIMPHY_DDR_PAD_CNTRL 0x8c + +/* Method #0 */ +#define SHIMPHY_PAD_PLL_SEQUENCE BIT(8) +#define SHIMPHY_PAD_GATE_PLL_S3 BIT(9) + +/* Method #1 */ +#define PWRDWN_SEQ_NO_SEQUENCING 0 +#define PWRDWN_SEQ_HOLD_CHANNEL 1 +#define PWRDWN_SEQ_RESET_PLL 2 +#define PWRDWN_SEQ_POWERDOWN_PLL 3 + +#define SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK 0x00f00000 +#define SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT 20 + +#define DDR_FORCE_CKE_RST_N BIT(3) +#define DDR_PHY_RST_N BIT(2) +#define DDR_PHY_CKE BIT(1) + +#define DDR_PHY_NO_CHANNEL 0xffffffff + +#define MAX_NUM_MEMC 3 + +struct brcmstb_memc { + void __iomem *ddr_phy_base; + void __iomem *ddr_shimphy_base; + void __iomem *ddr_ctrl; +}; + +struct brcmstb_pm_control { + void __iomem *aon_ctrl_base; + void __iomem *aon_sram; + struct brcmstb_memc memcs[MAX_NUM_MEMC]; + + void __iomem *boot_sram; + size_t boot_sram_len; + + bool support_warm_boot; + size_t pll_status_offset; + int num_memc; + + struct brcmstb_s3_params *s3_params; + dma_addr_t s3_params_pa; + int s3entry_method; + u32 warm_boot_offset; + u32 phy_a_standby_ctrl_offs; + u32 phy_b_standby_ctrl_offs; + bool needs_ddr_pad; + struct platform_device *pdev; +}; + +enum bsp_initiate_command { + BSP_CLOCK_STOP = 0x00, + BSP_GEN_RANDOM_KEY = 0x4A, + BSP_RESTORE_RANDOM_KEY = 0x55, + BSP_GEN_FIXED_KEY = 0x63, +}; + +#define PM_INITIATE 0x01 +#define PM_INITIATE_SUCCESS 0x00 +#define PM_INITIATE_FAIL 0xfe + +static struct brcmstb_pm_control ctrl; + +static int (*brcmstb_pm_do_s2_sram)(void __iomem *aon_ctrl_base, + void __iomem *ddr_phy_pll_status); + +static int brcmstb_init_sram(struct device_node *dn) +{ + void __iomem *sram; + struct resource res; + int ret; + + ret = of_address_to_resource(dn, 0, &res); + if (ret) + return ret; + + /* Uncached, executable remapping of SRAM */ + sram = __arm_ioremap_exec(res.start, resource_size(&res), false); + if (!sram) + return -ENOMEM; + + ctrl.boot_sram = sram; + ctrl.boot_sram_len = resource_size(&res); + + return 0; +} + +static const struct of_device_id sram_dt_ids[] = { + { .compatible = "mmio-sram" }, + { /* sentinel */ } +}; + +static int do_bsp_initiate_command(enum bsp_initiate_command cmd) +{ + void __iomem *base = ctrl.aon_ctrl_base; + int ret; + int timeo = 1000 * 1000; /* 1 second */ + + writel_relaxed(0, base + AON_CTRL_PM_INITIATE); + (void)readl_relaxed(base + AON_CTRL_PM_INITIATE); + + /* Go! */ + writel_relaxed((cmd << 1) | PM_INITIATE, base + AON_CTRL_PM_INITIATE); + + /* + * If firmware doesn't support the 'ack', then just assume it's done + * after 10ms. Note that this only works for command 0, BSP_CLOCK_STOP + */ + if (of_machine_is_compatible("brcm,bcm74371a0")) { + (void)readl_relaxed(base + AON_CTRL_PM_INITIATE); + mdelay(10); + return 0; + } + + for (;;) { + ret = readl_relaxed(base + AON_CTRL_PM_INITIATE); + if (!(ret & PM_INITIATE)) + break; + if (timeo <= 0) { + pr_err("error: timeout waiting for BSP (%x)\n", ret); + break; + } + timeo -= 50; + udelay(50); + } + + return (ret & 0xff) != PM_INITIATE_SUCCESS; +} + +static int brcmstb_pm_handshake(void) +{ + void __iomem *base = ctrl.aon_ctrl_base; + u32 tmp; + int ret; + + /* BSP power handshake, v1 */ + tmp = readl_relaxed(base + AON_CTRL_HOST_MISC_CMDS); + tmp &= ~1UL; + writel_relaxed(tmp, base + AON_CTRL_HOST_MISC_CMDS); + (void)readl_relaxed(base + AON_CTRL_HOST_MISC_CMDS); + + ret = do_bsp_initiate_command(BSP_CLOCK_STOP); + if (ret) + pr_err("BSP handshake failed\n"); + + /* + * HACK: BSP may have internal race on the CLOCK_STOP command. + * Avoid touching the BSP for a few milliseconds. + */ + mdelay(3); + + return ret; +} + +static inline void shimphy_set(u32 value, u32 mask) +{ + int i; + + if (!ctrl.needs_ddr_pad) + return; + + for (i = 0; i < ctrl.num_memc; i++) { + u32 tmp; + + tmp = readl_relaxed(ctrl.memcs[i].ddr_shimphy_base + + SHIMPHY_DDR_PAD_CNTRL); + tmp = value | (tmp & mask); + writel_relaxed(tmp, ctrl.memcs[i].ddr_shimphy_base + + SHIMPHY_DDR_PAD_CNTRL); + } + wmb(); /* Complete sequence in order. */ +} + +static inline void ddr_ctrl_set(bool warmboot) +{ + int i; + + for (i = 0; i < ctrl.num_memc; i++) { + u32 tmp; + + tmp = readl_relaxed(ctrl.memcs[i].ddr_ctrl + + ctrl.warm_boot_offset); + if (warmboot) + tmp |= 1; + else + tmp &= ~1; /* Cold boot */ + writel_relaxed(tmp, ctrl.memcs[i].ddr_ctrl + + ctrl.warm_boot_offset); + } + /* Complete sequence in order */ + wmb(); +} + +static inline void s3entry_method0(void) +{ + shimphy_set(SHIMPHY_PAD_GATE_PLL_S3 | SHIMPHY_PAD_PLL_SEQUENCE, + 0xffffffff); +} + +static inline void s3entry_method1(void) +{ + /* + * S3 Entry Sequence + * ----------------- + * Step 1: SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL [ S3_PWRDWN_SEQ ] = 3 + * Step 2: MEMC_DDR_0_WARM_BOOT [ WARM_BOOT ] = 1 + */ + shimphy_set((PWRDWN_SEQ_POWERDOWN_PLL << + SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT), + ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK); + + ddr_ctrl_set(true); +} + +static inline void s5entry_method1(void) +{ + int i; + + /* + * S5 Entry Sequence + * ----------------- + * Step 1: SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL [ S3_PWRDWN_SEQ ] = 3 + * Step 2: MEMC_DDR_0_WARM_BOOT [ WARM_BOOT ] = 0 + * Step 3: DDR_PHY_CONTROL_REGS_[AB]_0_STANDBY_CONTROL[ CKE ] = 0 + * DDR_PHY_CONTROL_REGS_[AB]_0_STANDBY_CONTROL[ RST_N ] = 0 + */ + shimphy_set((PWRDWN_SEQ_POWERDOWN_PLL << + SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT), + ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK); + + ddr_ctrl_set(false); + + for (i = 0; i < ctrl.num_memc; i++) { + u32 tmp; + + /* Step 3: Channel A (RST_N = CKE = 0) */ + tmp = readl_relaxed(ctrl.memcs[i].ddr_phy_base + + ctrl.phy_a_standby_ctrl_offs); + tmp &= ~(DDR_PHY_RST_N | DDR_PHY_RST_N); + writel_relaxed(tmp, ctrl.memcs[i].ddr_phy_base + + ctrl.phy_a_standby_ctrl_offs); + + /* Step 3: Channel B? */ + if (ctrl.phy_b_standby_ctrl_offs != DDR_PHY_NO_CHANNEL) { + tmp = readl_relaxed(ctrl.memcs[i].ddr_phy_base + + ctrl.phy_b_standby_ctrl_offs); + tmp &= ~(DDR_PHY_RST_N | DDR_PHY_RST_N); + writel_relaxed(tmp, ctrl.memcs[i].ddr_phy_base + + ctrl.phy_b_standby_ctrl_offs); + } + } + /* Must complete */ + wmb(); +} + +/* + * Run a Power Management State Machine (PMSM) shutdown command and put the CPU + * into a low-power mode + */ +static void brcmstb_do_pmsm_power_down(unsigned long base_cmd, bool onewrite) +{ + void __iomem *base = ctrl.aon_ctrl_base; + + if ((ctrl.s3entry_method == 1) && (base_cmd == PM_COLD_CONFIG)) + s5entry_method1(); + + /* pm_start_pwrdn transition 0->1 */ + writel_relaxed(base_cmd, base + AON_CTRL_PM_CTRL); + + if (!onewrite) { + (void)readl_relaxed(base + AON_CTRL_PM_CTRL); + + writel_relaxed(base_cmd | PM_PWR_DOWN, base + AON_CTRL_PM_CTRL); + (void)readl_relaxed(base + AON_CTRL_PM_CTRL); + } + wfi(); +} + +/* Support S5 cold boot out of "poweroff" */ +static void brcmstb_pm_poweroff(void) +{ + brcmstb_pm_handshake(); + + /* Clear magic S3 warm-boot value */ + writel_relaxed(0, ctrl.aon_sram + AON_REG_MAGIC_FLAGS); + (void)readl_relaxed(ctrl.aon_sram + AON_REG_MAGIC_FLAGS); + + /* Skip wait-for-interrupt signal; just use a countdown */ + writel_relaxed(0x10, ctrl.aon_ctrl_base + AON_CTRL_PM_CPU_WAIT_COUNT); + (void)readl_relaxed(ctrl.aon_ctrl_base + AON_CTRL_PM_CPU_WAIT_COUNT); + + if (ctrl.s3entry_method == 1) { + shimphy_set((PWRDWN_SEQ_POWERDOWN_PLL << + SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT), + ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK); + ddr_ctrl_set(false); + brcmstb_do_pmsm_power_down(M1_PM_COLD_CONFIG, true); + return; /* We should never actually get here */ + } + + brcmstb_do_pmsm_power_down(PM_COLD_CONFIG, false); +} + +static void *brcmstb_pm_copy_to_sram(void *fn, size_t len) +{ + unsigned int size = ALIGN(len, FNCPY_ALIGN); + + if (ctrl.boot_sram_len < size) { + pr_err("standby code will not fit in SRAM\n"); + return NULL; + } + + return fncpy(ctrl.boot_sram, fn, size); +} + +/* + * S2 suspend/resume picks up where we left off, so we must execute carefully + * from SRAM, in order to allow DDR to come back up safely before we continue. + */ +static int brcmstb_pm_s2(void) +{ + /* A previous S3 can set a value hazardous to S2, so make sure. */ + if (ctrl.s3entry_method == 1) { + shimphy_set((PWRDWN_SEQ_NO_SEQUENCING << + SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT), + ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK); + ddr_ctrl_set(false); + } + + brcmstb_pm_do_s2_sram = brcmstb_pm_copy_to_sram(&brcmstb_pm_do_s2, + brcmstb_pm_do_s2_sz); + if (!brcmstb_pm_do_s2_sram) + return -EINVAL; + + return brcmstb_pm_do_s2_sram(ctrl.aon_ctrl_base, + ctrl.memcs[0].ddr_phy_base + + ctrl.pll_status_offset); +} + +/* + * This function is called on a new stack, so don't allow inlining (which will + * generate stack references on the old stack). It cannot be made static because + * it is referenced from brcmstb_pm_s3() + */ +noinline int brcmstb_pm_s3_finish(void) +{ + struct brcmstb_s3_params *params = ctrl.s3_params; + dma_addr_t params_pa = ctrl.s3_params_pa; + phys_addr_t reentry = virt_to_phys(&cpu_resume); + enum bsp_initiate_command cmd; + u32 flags; + + /* + * Clear parameter structure, but not DTU area, which has already been + * filled in. We know DTU is a the end, so we can just subtract its + * size. + */ + memset(params, 0, sizeof(*params) - sizeof(params->dtu)); + + flags = readl_relaxed(ctrl.aon_sram + AON_REG_MAGIC_FLAGS); + + flags &= S3_BOOTLOADER_RESERVED; + flags |= S3_FLAG_NO_MEM_VERIFY; + flags |= S3_FLAG_LOAD_RANDKEY; + + /* Load random / fixed key */ + if (flags & S3_FLAG_LOAD_RANDKEY) + cmd = BSP_GEN_RANDOM_KEY; + else + cmd = BSP_GEN_FIXED_KEY; + if (do_bsp_initiate_command(cmd)) { + pr_info("key loading failed\n"); + return -EIO; + } + + params->magic = BRCMSTB_S3_MAGIC; + params->reentry = reentry; + + /* No more writes to DRAM */ + flush_cache_all(); + + flags |= BRCMSTB_S3_MAGIC_SHORT; + + writel_relaxed(flags, ctrl.aon_sram + AON_REG_MAGIC_FLAGS); + writel_relaxed(lower_32_bits(params_pa), + ctrl.aon_sram + AON_REG_CONTROL_LOW); + writel_relaxed(upper_32_bits(params_pa), + ctrl.aon_sram + AON_REG_CONTROL_HIGH); + + switch (ctrl.s3entry_method) { + case 0: + s3entry_method0(); + brcmstb_do_pmsm_power_down(PM_WARM_CONFIG, false); + break; + case 1: + s3entry_method1(); + brcmstb_do_pmsm_power_down(M1_PM_WARM_CONFIG, true); + break; + default: + return -EINVAL; + } + + /* Must have been interrupted from wfi()? */ + return -EINTR; +} + +static int brcmstb_pm_do_s3(unsigned long sp) +{ + unsigned long save_sp; + int ret; + + asm volatile ( + "mov %[save], sp\n" + "mov sp, %[new]\n" + "bl brcmstb_pm_s3_finish\n" + "mov %[ret], r0\n" + "mov %[new], sp\n" + "mov sp, %[save]\n" + : [save] "=&r" (save_sp), [ret] "=&r" (ret) + : [new] "r" (sp) + ); + + return ret; +} + +static int brcmstb_pm_s3(void) +{ + void __iomem *sp = ctrl.boot_sram + ctrl.boot_sram_len; + + return cpu_suspend((unsigned long)sp, brcmstb_pm_do_s3); +} + +static int brcmstb_pm_standby(bool deep_standby) +{ + int ret; + + if (brcmstb_pm_handshake()) + return -EIO; + + if (deep_standby) + ret = brcmstb_pm_s3(); + else + ret = brcmstb_pm_s2(); + if (ret) + pr_err("%s: standby failed\n", __func__); + + return ret; +} + +static int brcmstb_pm_enter(suspend_state_t state) +{ + int ret = -EINVAL; + + switch (state) { + case PM_SUSPEND_STANDBY: + ret = brcmstb_pm_standby(false); + break; + case PM_SUSPEND_MEM: + ret = brcmstb_pm_standby(true); + break; + } + + return ret; +} + +static int brcmstb_pm_valid(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + return true; + case PM_SUSPEND_MEM: + return ctrl.support_warm_boot; + default: + return false; + } +} + +static const struct platform_suspend_ops brcmstb_pm_ops = { + .enter = brcmstb_pm_enter, + .valid = brcmstb_pm_valid, +}; + +static const struct of_device_id aon_ctrl_dt_ids[] = { + { .compatible = "brcm,brcmstb-aon-ctrl" }, + {} +}; + +struct ddr_phy_ofdata { + bool supports_warm_boot; + size_t pll_status_offset; + int s3entry_method; + u32 warm_boot_offset; + u32 phy_a_standby_ctrl_offs; + u32 phy_b_standby_ctrl_offs; +}; + +static struct ddr_phy_ofdata ddr_phy_71_1 = { + .supports_warm_boot = true, + .pll_status_offset = 0x0c, + .s3entry_method = 1, + .warm_boot_offset = 0x2c, + .phy_a_standby_ctrl_offs = 0x198, + .phy_b_standby_ctrl_offs = DDR_PHY_NO_CHANNEL +}; + +static struct ddr_phy_ofdata ddr_phy_72_0 = { + .supports_warm_boot = true, + .pll_status_offset = 0x10, + .s3entry_method = 1, + .warm_boot_offset = 0x40, + .phy_a_standby_ctrl_offs = 0x2a4, + .phy_b_standby_ctrl_offs = 0x8a4 +}; + +static struct ddr_phy_ofdata ddr_phy_225_1 = { + .supports_warm_boot = false, + .pll_status_offset = 0x4, + .s3entry_method = 0 +}; + +static struct ddr_phy_ofdata ddr_phy_240_1 = { + .supports_warm_boot = true, + .pll_status_offset = 0x4, + .s3entry_method = 0 +}; + +static const struct of_device_id ddr_phy_dt_ids[] = { + { + .compatible = "brcm,brcmstb-ddr-phy-v71.1", + .data = &ddr_phy_71_1, + }, + { + .compatible = "brcm,brcmstb-ddr-phy-v72.0", + .data = &ddr_phy_72_0, + }, + { + .compatible = "brcm,brcmstb-ddr-phy-v225.1", + .data = &ddr_phy_225_1, + }, + { + .compatible = "brcm,brcmstb-ddr-phy-v240.1", + .data = &ddr_phy_240_1, + }, + { + /* Same as v240.1, for the registers we care about */ + .compatible = "brcm,brcmstb-ddr-phy-v240.2", + .data = &ddr_phy_240_1, + }, + {} +}; + +struct ddr_seq_ofdata { + bool needs_ddr_pad; + u32 warm_boot_offset; +}; + +static const struct ddr_seq_ofdata ddr_seq_b22 = { + .needs_ddr_pad = false, + .warm_boot_offset = 0x2c, +}; + +static const struct ddr_seq_ofdata ddr_seq = { + .needs_ddr_pad = true, +}; + +static const struct of_device_id ddr_shimphy_dt_ids[] = { + { .compatible = "brcm,brcmstb-ddr-shimphy-v1.0" }, + {} +}; + +static const struct of_device_id brcmstb_memc_of_match[] = { + { + .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.2", + .data = &ddr_seq_b22, + }, + { + .compatible = "brcm,brcmstb-memc-ddr", + .data = &ddr_seq, + }, + {}, +}; + +static void __iomem *brcmstb_ioremap_match(const struct of_device_id *matches, + int index, const void **ofdata) +{ + struct device_node *dn; + const struct of_device_id *match; + + dn = of_find_matching_node_and_match(NULL, matches, &match); + if (!dn) + return ERR_PTR(-EINVAL); + + if (ofdata) + *ofdata = match->data; + + return of_io_request_and_map(dn, index, dn->full_name); +} + +static int brcmstb_pm_panic_notify(struct notifier_block *nb, + unsigned long action, void *data) +{ + writel_relaxed(BRCMSTB_PANIC_MAGIC, ctrl.aon_sram + AON_REG_PANIC); + + return NOTIFY_DONE; +} + +static struct notifier_block brcmstb_pm_panic_nb = { + .notifier_call = brcmstb_pm_panic_notify, +}; + +static int brcmstb_pm_probe(struct platform_device *pdev) +{ + const struct ddr_phy_ofdata *ddr_phy_data; + const struct ddr_seq_ofdata *ddr_seq_data; + const struct of_device_id *of_id = NULL; + struct device_node *dn; + void __iomem *base; + int ret, i; + + /* AON ctrl registers */ + base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL); + if (IS_ERR(base)) { + pr_err("error mapping AON_CTRL\n"); + return PTR_ERR(base); + } + ctrl.aon_ctrl_base = base; + + /* AON SRAM registers */ + base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 1, NULL); + if (IS_ERR(base)) { + /* Assume standard offset */ + ctrl.aon_sram = ctrl.aon_ctrl_base + + AON_CTRL_SYSTEM_DATA_RAM_OFS; + } else { + ctrl.aon_sram = base; + } + + writel_relaxed(0, ctrl.aon_sram + AON_REG_PANIC); + + /* DDR PHY registers */ + base = brcmstb_ioremap_match(ddr_phy_dt_ids, 0, + (const void **)&ddr_phy_data); + if (IS_ERR(base)) { + pr_err("error mapping DDR PHY\n"); + return PTR_ERR(base); + } + ctrl.support_warm_boot = ddr_phy_data->supports_warm_boot; + ctrl.pll_status_offset = ddr_phy_data->pll_status_offset; + /* Only need DDR PHY 0 for now? */ + ctrl.memcs[0].ddr_phy_base = base; + ctrl.s3entry_method = ddr_phy_data->s3entry_method; + ctrl.phy_a_standby_ctrl_offs = ddr_phy_data->phy_a_standby_ctrl_offs; + ctrl.phy_b_standby_ctrl_offs = ddr_phy_data->phy_b_standby_ctrl_offs; + /* + * Slightly grosss to use the phy ver to get a memc, + * offset but that is the only versioned things so far + * we can test for. + */ + ctrl.warm_boot_offset = ddr_phy_data->warm_boot_offset; + + /* DDR SHIM-PHY registers */ + for_each_matching_node(dn, ddr_shimphy_dt_ids) { + i = ctrl.num_memc; + if (i >= MAX_NUM_MEMC) { + pr_warn("too many MEMCs (max %d)\n", MAX_NUM_MEMC); + break; + } + + base = of_io_request_and_map(dn, 0, dn->full_name); + if (IS_ERR(base)) { + if (!ctrl.support_warm_boot) + break; + + pr_err("error mapping DDR SHIMPHY %d\n", i); + return PTR_ERR(base); + } + ctrl.memcs[i].ddr_shimphy_base = base; + ctrl.num_memc++; + } + + /* Sequencer DRAM Param and Control Registers */ + i = 0; + for_each_matching_node(dn, brcmstb_memc_of_match) { + base = of_iomap(dn, 0); + if (!base) { + pr_err("error mapping DDR Sequencer %d\n", i); + return -ENOMEM; + } + + of_id = of_match_node(brcmstb_memc_of_match, dn); + if (!of_id) { + iounmap(base); + return -EINVAL; + } + + ddr_seq_data = of_id->data; + ctrl.needs_ddr_pad = ddr_seq_data->needs_ddr_pad; + /* Adjust warm boot offset based on the DDR sequencer */ + if (ddr_seq_data->warm_boot_offset) + ctrl.warm_boot_offset = ddr_seq_data->warm_boot_offset; + + ctrl.memcs[i].ddr_ctrl = base; + i++; + } + + pr_debug("PM: supports warm boot:%d, method:%d, wboffs:%x\n", + ctrl.support_warm_boot, ctrl.s3entry_method, + ctrl.warm_boot_offset); + + dn = of_find_matching_node(NULL, sram_dt_ids); + if (!dn) { + pr_err("SRAM not found\n"); + return -EINVAL; + } + + ret = brcmstb_init_sram(dn); + if (ret) { + pr_err("error setting up SRAM for PM\n"); + return ret; + } + + ctrl.pdev = pdev; + + ctrl.s3_params = kmalloc(sizeof(*ctrl.s3_params), GFP_KERNEL); + if (!ctrl.s3_params) + return -ENOMEM; + ctrl.s3_params_pa = dma_map_single(&pdev->dev, ctrl.s3_params, + sizeof(*ctrl.s3_params), + DMA_TO_DEVICE); + if (dma_mapping_error(&pdev->dev, ctrl.s3_params_pa)) { + pr_err("error mapping DMA memory\n"); + ret = -ENOMEM; + goto out; + } + + atomic_notifier_chain_register(&panic_notifier_list, + &brcmstb_pm_panic_nb); + + pm_power_off = brcmstb_pm_poweroff; + suspend_set_ops(&brcmstb_pm_ops); + + return 0; + +out: + kfree(ctrl.s3_params); + + pr_warn("PM: initialization failed with code %d\n", ret); + + return ret; +} + +static struct platform_driver brcmstb_pm_driver = { + .driver = { + .name = "brcmstb-pm", + .of_match_table = aon_ctrl_dt_ids, + }, +}; + +static int __init brcmstb_pm_init(void) +{ + return platform_driver_probe(&brcmstb_pm_driver, + brcmstb_pm_probe); +} +module_init(brcmstb_pm_init); |