diff options
Diffstat (limited to 'drivers/soc/bcm')
| -rw-r--r-- | drivers/soc/bcm/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/soc/bcm/Makefile | 1 | ||||
| -rw-r--r-- | drivers/soc/bcm/bcm63xx/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/soc/bcm/bcm63xx/Makefile | 2 | ||||
| -rw-r--r-- | drivers/soc/bcm/bcm63xx/bcm63xx-power.c | 378 | ||||
| -rw-r--r-- | drivers/soc/bcm/brcmstb/biuctrl.c | 105 |
6 files changed, 498 insertions, 10 deletions
diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig index 648e32693b7e..24f92a6e882a 100644 --- a/drivers/soc/bcm/Kconfig +++ b/drivers/soc/bcm/Kconfig @@ -22,6 +22,15 @@ config RASPBERRYPI_POWER This enables support for the RPi power domains which can be enabled or disabled via the RPi firmware. +config SOC_BCM63XX + bool "Broadcom 63xx SoC drivers" + depends on BMIPS_GENERIC || COMPILE_TEST + help + Enables drivers for the Broadcom 63xx series of chips. + Drivers can be enabled individually within this menu. + + If unsure, say N. + config SOC_BRCMSTB bool "Broadcom STB SoC drivers" depends on ARM || ARM64 || BMIPS_GENERIC || COMPILE_TEST @@ -33,6 +42,7 @@ config SOC_BRCMSTB If unsure, say N. +source "drivers/soc/bcm/bcm63xx/Kconfig" source "drivers/soc/bcm/brcmstb/Kconfig" endmenu diff --git a/drivers/soc/bcm/Makefile b/drivers/soc/bcm/Makefile index d92268a829a9..7bc90e0bd773 100644 --- a/drivers/soc/bcm/Makefile +++ b/drivers/soc/bcm/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_BCM2835_POWER) += bcm2835-power.o obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o +obj-$(CONFIG_SOC_BCM63XX) += bcm63xx/ obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/ diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig new file mode 100644 index 000000000000..16f648a6c70a --- /dev/null +++ b/drivers/soc/bcm/bcm63xx/Kconfig @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0-only +if SOC_BCM63XX + +config BCM63XX_POWER + bool "BCM63xx power domain driver" + depends on BMIPS_GENERIC || (COMPILE_TEST && OF) + select PM_GENERIC_DOMAINS if PM + help + This enables support for the BCM63xx power domains controller on + BCM6318, BCM6328, BCM6362 and BCM63268 SoCs. + +endif # SOC_BCM63XX diff --git a/drivers/soc/bcm/bcm63xx/Makefile b/drivers/soc/bcm/bcm63xx/Makefile new file mode 100644 index 000000000000..0710d5e018cc --- /dev/null +++ b/drivers/soc/bcm/bcm63xx/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_BCM63XX_POWER) += bcm63xx-power.o diff --git a/drivers/soc/bcm/bcm63xx/bcm63xx-power.c b/drivers/soc/bcm/bcm63xx/bcm63xx-power.c new file mode 100644 index 000000000000..515fe182dc34 --- /dev/null +++ b/drivers/soc/bcm/bcm63xx/bcm63xx-power.c @@ -0,0 +1,378 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * BCM63xx Power Domain Controller Driver + * + * Copyright (C) 2020 Álvaro Fernández Rojas <noltari@gmail.com> + */ + +#include <dt-bindings/soc/bcm6318-pm.h> +#include <dt-bindings/soc/bcm6328-pm.h> +#include <dt-bindings/soc/bcm6362-pm.h> +#include <dt-bindings/soc/bcm63268-pm.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_domain.h> +#include <linux/of.h> +#include <linux/of_device.h> + +struct bcm63xx_power_dev { + struct generic_pm_domain genpd; + struct bcm63xx_power *power; + uint32_t mask; +}; + +struct bcm63xx_power { + void __iomem *base; + spinlock_t lock; + struct bcm63xx_power_dev *dev; + struct genpd_onecell_data genpd_data; + struct generic_pm_domain **genpd; +}; + +struct bcm63xx_power_data { + const char * const name; + uint8_t bit; + unsigned int flags; +}; + +static int bcm63xx_power_get_state(struct bcm63xx_power_dev *pmd, bool *is_on) +{ + struct bcm63xx_power *power = pmd->power; + + if (!pmd->mask) { + *is_on = false; + return -EINVAL; + } + + *is_on = !(__raw_readl(power->base) & pmd->mask); + + return 0; +} + +static int bcm63xx_power_set_state(struct bcm63xx_power_dev *pmd, bool on) +{ + struct bcm63xx_power *power = pmd->power; + unsigned long flags; + uint32_t val; + + if (!pmd->mask) + return -EINVAL; + + spin_lock_irqsave(&power->lock, flags); + val = __raw_readl(power->base); + if (on) + val &= ~pmd->mask; + else + val |= pmd->mask; + __raw_writel(val, power->base); + spin_unlock_irqrestore(&power->lock, flags); + + return 0; +} + +static int bcm63xx_power_on(struct generic_pm_domain *genpd) +{ + struct bcm63xx_power_dev *pmd = container_of(genpd, + struct bcm63xx_power_dev, genpd); + + return bcm63xx_power_set_state(pmd, true); +} + +static int bcm63xx_power_off(struct generic_pm_domain *genpd) +{ + struct bcm63xx_power_dev *pmd = container_of(genpd, + struct bcm63xx_power_dev, genpd); + + return bcm63xx_power_set_state(pmd, false); +} + +static int bcm63xx_power_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct resource *res; + const struct bcm63xx_power_data *entry, *table; + struct bcm63xx_power *power; + unsigned int ndom; + uint8_t max_bit = 0; + int ret; + + power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL); + if (!power) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + power->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(power->base)) + return PTR_ERR(power->base); + + table = of_device_get_match_data(dev); + if (!table) + return -EINVAL; + + power->genpd_data.num_domains = 0; + ndom = 0; + for (entry = table; entry->name; entry++) { + max_bit = max(max_bit, entry->bit); + ndom++; + } + + if (!ndom) + return -ENODEV; + + power->genpd_data.num_domains = max_bit + 1; + + power->dev = devm_kcalloc(dev, power->genpd_data.num_domains, + sizeof(struct bcm63xx_power_dev), + GFP_KERNEL); + if (!power->dev) + return -ENOMEM; + + power->genpd = devm_kcalloc(dev, power->genpd_data.num_domains, + sizeof(struct generic_pm_domain *), + GFP_KERNEL); + if (!power->genpd) + return -ENOMEM; + + power->genpd_data.domains = power->genpd; + + ndom = 0; + for (entry = table; entry->name; entry++) { + struct bcm63xx_power_dev *pmd = &power->dev[ndom]; + bool is_on; + + pmd->power = power; + pmd->mask = BIT(entry->bit); + pmd->genpd.name = entry->name; + pmd->genpd.flags = entry->flags; + + ret = bcm63xx_power_get_state(pmd, &is_on); + if (ret) + dev_warn(dev, "unable to get current state for %s\n", + pmd->genpd.name); + + pmd->genpd.power_on = bcm63xx_power_on; + pmd->genpd.power_off = bcm63xx_power_off; + + pm_genpd_init(&pmd->genpd, NULL, !is_on); + power->genpd[entry->bit] = &pmd->genpd; + + ndom++; + } + + spin_lock_init(&power->lock); + + ret = of_genpd_add_provider_onecell(np, &power->genpd_data); + if (ret) { + dev_err(dev, "failed to register genpd driver: %d\n", ret); + return ret; + } + + dev_info(dev, "registered %u power domains\n", ndom); + + return 0; +} + +static const struct bcm63xx_power_data bcm6318_power_domains[] = { + { + .name = "pcie", + .bit = BCM6318_POWER_DOMAIN_PCIE, + }, { + .name = "usb", + .bit = BCM6318_POWER_DOMAIN_USB, + }, { + .name = "ephy0", + .bit = BCM6318_POWER_DOMAIN_EPHY0, + }, { + .name = "ephy1", + .bit = BCM6318_POWER_DOMAIN_EPHY1, + }, { + .name = "ephy2", + .bit = BCM6318_POWER_DOMAIN_EPHY2, + }, { + .name = "ephy3", + .bit = BCM6318_POWER_DOMAIN_EPHY3, + }, { + .name = "ldo2p5", + .bit = BCM6318_POWER_DOMAIN_LDO2P5, + .flags = GENPD_FLAG_ALWAYS_ON, + }, { + .name = "ldo2p9", + .bit = BCM6318_POWER_DOMAIN_LDO2P9, + .flags = GENPD_FLAG_ALWAYS_ON, + }, { + .name = "sw1p0", + .bit = BCM6318_POWER_DOMAIN_SW1P0, + .flags = GENPD_FLAG_ALWAYS_ON, + }, { + .name = "pad", + .bit = BCM6318_POWER_DOMAIN_PAD, + .flags = GENPD_FLAG_ALWAYS_ON, + }, { + /* sentinel */ + }, +}; + +static const struct bcm63xx_power_data bcm6328_power_domains[] = { + { + .name = "adsl2-mips", + .bit = BCM6328_POWER_DOMAIN_ADSL2_MIPS, + }, { + .name = "adsl2-phy", + .bit = BCM6328_POWER_DOMAIN_ADSL2_PHY, + }, { + .name = "adsl2-afe", + .bit = BCM6328_POWER_DOMAIN_ADSL2_AFE, + }, { + .name = "sar", + .bit = BCM6328_POWER_DOMAIN_SAR, + }, { + .name = "pcm", + .bit = BCM6328_POWER_DOMAIN_PCM, + }, { + .name = "usbd", + .bit = BCM6328_POWER_DOMAIN_USBD, + }, { + .name = "usbh", + .bit = BCM6328_POWER_DOMAIN_USBH, + }, { + .name = "pcie", + .bit = BCM6328_POWER_DOMAIN_PCIE, + }, { + .name = "robosw", + .bit = BCM6328_POWER_DOMAIN_ROBOSW, + }, { + .name = "ephy", + .bit = BCM6328_POWER_DOMAIN_EPHY, + }, { + /* sentinel */ + }, +}; + +static const struct bcm63xx_power_data bcm6362_power_domains[] = { + { + .name = "sar", + .bit = BCM6362_POWER_DOMAIN_SAR, + }, { + .name = "ipsec", + .bit = BCM6362_POWER_DOMAIN_IPSEC, + }, { + .name = "mips", + .bit = BCM6362_POWER_DOMAIN_MIPS, + .flags = GENPD_FLAG_ALWAYS_ON, + }, { + .name = "dect", + .bit = BCM6362_POWER_DOMAIN_DECT, + }, { + .name = "usbh", + .bit = BCM6362_POWER_DOMAIN_USBH, + }, { + .name = "usbd", + .bit = BCM6362_POWER_DOMAIN_USBD, + }, { + .name = "robosw", + .bit = BCM6362_POWER_DOMAIN_ROBOSW, + }, { + .name = "pcm", + .bit = BCM6362_POWER_DOMAIN_PCM, + }, { + .name = "periph", + .bit = BCM6362_POWER_DOMAIN_PERIPH, + .flags = GENPD_FLAG_ALWAYS_ON, + }, { + .name = "adsl-phy", + .bit = BCM6362_POWER_DOMAIN_ADSL_PHY, + }, { + .name = "gmii-pads", + .bit = BCM6362_POWER_DOMAIN_GMII_PADS, + }, { + .name = "fap", + .bit = BCM6362_POWER_DOMAIN_FAP, + }, { + .name = "pcie", + .bit = BCM6362_POWER_DOMAIN_PCIE, + }, { + .name = "wlan-pads", + .bit = BCM6362_POWER_DOMAIN_WLAN_PADS, + }, { + /* sentinel */ + }, +}; + +static const struct bcm63xx_power_data bcm63268_power_domains[] = { + { + .name = "sar", + .bit = BCM63268_POWER_DOMAIN_SAR, + }, { + .name = "ipsec", + .bit = BCM63268_POWER_DOMAIN_IPSEC, + }, { + .name = "mips", + .bit = BCM63268_POWER_DOMAIN_MIPS, + .flags = GENPD_FLAG_ALWAYS_ON, + }, { + .name = "dect", + .bit = BCM63268_POWER_DOMAIN_DECT, + }, { + .name = "usbh", + .bit = BCM63268_POWER_DOMAIN_USBH, + }, { + .name = "usbd", + .bit = BCM63268_POWER_DOMAIN_USBD, + }, { + .name = "robosw", + .bit = BCM63268_POWER_DOMAIN_ROBOSW, + }, { + .name = "pcm", + .bit = BCM63268_POWER_DOMAIN_PCM, + }, { + .name = "periph", + .bit = BCM63268_POWER_DOMAIN_PERIPH, + .flags = GENPD_FLAG_ALWAYS_ON, + }, { + .name = "vdsl-phy", + .bit = BCM63268_POWER_DOMAIN_VDSL_PHY, + }, { + .name = "vdsl-mips", + .bit = BCM63268_POWER_DOMAIN_VDSL_MIPS, + }, { + .name = "fap", + .bit = BCM63268_POWER_DOMAIN_FAP, + }, { + .name = "pcie", + .bit = BCM63268_POWER_DOMAIN_PCIE, + }, { + .name = "wlan-pads", + .bit = BCM63268_POWER_DOMAIN_WLAN_PADS, + }, { + /* sentinel */ + }, +}; + +static const struct of_device_id bcm63xx_power_of_match[] = { + { + .compatible = "brcm,bcm6318-power-controller", + .data = &bcm6318_power_domains, + }, { + .compatible = "brcm,bcm6328-power-controller", + .data = &bcm6328_power_domains, + }, { + .compatible = "brcm,bcm6362-power-controller", + .data = &bcm6362_power_domains, + }, { + .compatible = "brcm,bcm63268-power-controller", + .data = &bcm63268_power_domains, + }, { + /* sentinel */ + } +}; + +static struct platform_driver bcm63xx_power_driver = { + .driver = { + .name = "bcm63xx-power-controller", + .of_match_table = bcm63xx_power_of_match, + }, + .probe = bcm63xx_power_probe, +}; +builtin_platform_driver(bcm63xx_power_driver); diff --git a/drivers/soc/bcm/brcmstb/biuctrl.c b/drivers/soc/bcm/brcmstb/biuctrl.c index 61731e01f94b..7f8dc302ae6e 100644 --- a/drivers/soc/bcm/brcmstb/biuctrl.c +++ b/drivers/soc/bcm/brcmstb/biuctrl.c @@ -13,6 +13,22 @@ #include <linux/syscore_ops.h> #include <linux/soc/brcmstb/brcmstb.h> +#define RACENPREF_MASK 0x3 +#define RACPREFINST_SHIFT 0 +#define RACENINST_SHIFT 2 +#define RACPREFDATA_SHIFT 4 +#define RACENDATA_SHIFT 6 +#define RAC_CPU_SHIFT 8 +#define RACCFG_MASK 0xff +#define DPREF_LINE_2_SHIFT 24 +#define DPREF_LINE_2_MASK 0xff + +/* Bitmask to enable instruction and data prefetching with a 256-bytes stride */ +#define RAC_DATA_INST_EN_MASK (1 << RACPREFINST_SHIFT | \ + RACENPREF_MASK << RACENINST_SHIFT | \ + 1 << RACPREFDATA_SHIFT | \ + RACENPREF_MASK << RACENDATA_SHIFT) + #define CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK 0x70000000 #define CPU_CREDIT_REG_MCPx_READ_CRED_MASK 0xf #define CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK 0xf @@ -31,11 +47,21 @@ static void __iomem *cpubiuctrl_base; static bool mcp_wr_pairing_en; static const int *cpubiuctrl_regs; +enum cpubiuctrl_regs { + CPU_CREDIT_REG = 0, + CPU_MCP_FLOW_REG, + CPU_WRITEBACK_CTRL_REG, + RAC_CONFIG0_REG, + RAC_CONFIG1_REG, + NUM_CPU_BIUCTRL_REGS, +}; + static inline u32 cbc_readl(int reg) { int offset = cpubiuctrl_regs[reg]; - if (offset == -1) + if (offset == -1 || + (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG)) return (u32)-1; return readl_relaxed(cpubiuctrl_base + offset); @@ -45,22 +71,19 @@ static inline void cbc_writel(u32 val, int reg) { int offset = cpubiuctrl_regs[reg]; - if (offset == -1) + if (offset == -1 || + (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG)) return; writel(val, cpubiuctrl_base + offset); } -enum cpubiuctrl_regs { - CPU_CREDIT_REG = 0, - CPU_MCP_FLOW_REG, - CPU_WRITEBACK_CTRL_REG -}; - static const int b15_cpubiuctrl_regs[] = { [CPU_CREDIT_REG] = 0x184, [CPU_MCP_FLOW_REG] = -1, [CPU_WRITEBACK_CTRL_REG] = -1, + [RAC_CONFIG0_REG] = -1, + [RAC_CONFIG1_REG] = -1, }; /* Odd cases, e.g: 7260A0 */ @@ -68,22 +91,26 @@ static const int b53_cpubiuctrl_no_wb_regs[] = { [CPU_CREDIT_REG] = 0x0b0, [CPU_MCP_FLOW_REG] = 0x0b4, [CPU_WRITEBACK_CTRL_REG] = -1, + [RAC_CONFIG0_REG] = 0x78, + [RAC_CONFIG1_REG] = 0x7c, }; static const int b53_cpubiuctrl_regs[] = { [CPU_CREDIT_REG] = 0x0b0, [CPU_MCP_FLOW_REG] = 0x0b4, [CPU_WRITEBACK_CTRL_REG] = 0x22c, + [RAC_CONFIG0_REG] = 0x78, + [RAC_CONFIG1_REG] = 0x7c, }; static const int a72_cpubiuctrl_regs[] = { [CPU_CREDIT_REG] = 0x18, [CPU_MCP_FLOW_REG] = 0x1c, [CPU_WRITEBACK_CTRL_REG] = 0x20, + [RAC_CONFIG0_REG] = 0x08, + [RAC_CONFIG1_REG] = 0x0c, }; -#define NUM_CPU_BIUCTRL_REGS 3 - static int __init mcp_write_pairing_set(void) { u32 creds = 0; @@ -110,6 +137,8 @@ static int __init mcp_write_pairing_set(void) static const u32 a72_b53_mach_compat[] = { 0x7211, 0x7216, + 0x72164, + 0x72165, 0x7255, 0x7260, 0x7268, @@ -117,6 +146,61 @@ static const u32 a72_b53_mach_compat[] = { 0x7278, }; +/* The read-ahead cache present in the Brahma-B53 CPU is a special piece of + * hardware after the integrated L2 cache of the B53 CPU complex whose purpose + * is to prefetch instruction and/or data with a line size of either 64 bytes + * or 256 bytes. The rationale is that the data-bus of the CPU interface is + * optimized for 256-byte transactions, and enabling the read-ahead cache + * provides a significant performance boost (typically twice the performance + * for a memcpy benchmark application). + * + * The read-ahead cache is transparent for Virtual Address cache maintenance + * operations: IC IVAU, DC IVAC, DC CVAC, DC CVAU and DC CIVAC. So no special + * handling is needed for the DMA API above and beyond what is included in the + * arm64 implementation. + * + * In addition, since the Point of Unification is typically between L1 and L2 + * for the Brahma-B53 processor no special read-ahead cache handling is needed + * for the IC IALLU and IC IALLUIS cache maintenance operations. + * + * However, it is not possible to specify the cache level (L3) for the cache + * maintenance instructions operating by set/way to operate on the read-ahead + * cache. The read-ahead cache will maintain coherency when inner cache lines + * are cleaned by set/way, but if it is necessary to invalidate inner cache + * lines by set/way to maintain coherency with system masters operating on + * shared memory that does not have hardware support for coherency, then it + * will also be necessary to explicitly invalidate the read-ahead cache. + */ +static void __init a72_b53_rac_enable_all(struct device_node *np) +{ + unsigned int cpu; + u32 enable = 0, pref_dist, shift; + + if (IS_ENABLED(CONFIG_CACHE_B15_RAC)) + return; + + if (WARN(num_possible_cpus() > 4, "RAC only supports 4 CPUs\n")) + return; + + pref_dist = cbc_readl(RAC_CONFIG1_REG); + for_each_possible_cpu(cpu) { + shift = cpu * RAC_CPU_SHIFT + RACPREFDATA_SHIFT; + enable |= RAC_DATA_INST_EN_MASK << (cpu * RAC_CPU_SHIFT); + if (cpubiuctrl_regs == a72_cpubiuctrl_regs) { + enable &= ~(RACENPREF_MASK << shift); + enable |= 3 << shift; + pref_dist |= 1 << (cpu + DPREF_LINE_2_SHIFT); + } + } + + cbc_writel(enable, RAC_CONFIG0_REG); + cbc_writel(pref_dist, RAC_CONFIG1_REG); + + pr_info("%pOF: Broadcom %s read-ahead cache\n", + np, cpubiuctrl_regs == a72_cpubiuctrl_regs ? + "Cortex-A72" : "Brahma-B53"); +} + static void __init mcp_a72_b53_set(void) { unsigned int i; @@ -262,6 +346,7 @@ static int __init brcmstb_biuctrl_init(void) return ret; } + a72_b53_rac_enable_all(np); mcp_a72_b53_set(); #ifdef CONFIG_PM_SLEEP register_syscore_ops(&brcmstb_cpu_credit_syscore_ops); |