diff options
Diffstat (limited to 'drivers/soc')
57 files changed, 2065 insertions, 277 deletions
diff --git a/drivers/soc/amlogic/meson-gx-socinfo.c b/drivers/soc/amlogic/meson-gx-socinfo.c index 6d0d04f163cb..01fc0d20a70d 100644 --- a/drivers/soc/amlogic/meson-gx-socinfo.c +++ b/drivers/soc/amlogic/meson-gx-socinfo.c @@ -40,6 +40,7 @@ static const struct meson_gx_soc_id { { "G12A", 0x28 }, { "G12B", 0x29 }, { "SM1", 0x2b }, + { "A1", 0x2c }, }; static const struct meson_gx_package_id { @@ -68,6 +69,8 @@ static const struct meson_gx_package_id { { "S922X", 0x29, 0x40, 0xf0 }, { "A311D", 0x29, 0x10, 0xf0 }, { "S905X3", 0x2b, 0x5, 0xf }, + { "S905D3", 0x2b, 0xb0, 0xf0 }, + { "A113L", 0x2c, 0x0, 0xf8 }, }; static inline unsigned int socinfo_to_major(u32 socinfo) diff --git a/drivers/soc/aspeed/aspeed-lpc-snoop.c b/drivers/soc/aspeed/aspeed-lpc-snoop.c index 48f7ac238861..f3d8d53ab84d 100644 --- a/drivers/soc/aspeed/aspeed-lpc-snoop.c +++ b/drivers/soc/aspeed/aspeed-lpc-snoop.c @@ -97,13 +97,13 @@ static ssize_t snoop_file_read(struct file *file, char __user *buffer, return ret ? ret : copied; } -static unsigned int snoop_file_poll(struct file *file, +static __poll_t snoop_file_poll(struct file *file, struct poll_table_struct *pt) { struct aspeed_lpc_snoop_channel *chan = snoop_file_to_chan(file); poll_wait(file, &chan->wq, pt); - return !kfifo_is_empty(&chan->fifo) ? POLLIN : 0; + return !kfifo_is_empty(&chan->fifo) ? EPOLLIN : 0; } static const struct file_operations snoop_fops = { diff --git a/drivers/soc/atmel/Kconfig b/drivers/soc/atmel/Kconfig index 05528139b023..50caf6db9c0e 100644 --- a/drivers/soc/atmel/Kconfig +++ b/drivers/soc/atmel/Kconfig @@ -5,3 +5,14 @@ config AT91_SOC_ID default ARCH_AT91 help Include support for the SoC bus on the Atmel ARM SoCs. + +config AT91_SOC_SFR + tristate "Special Function Registers support" + depends on ARCH_AT91 || COMPILE_TEST + help + This is a driver for the Special Function Registers available on + Atmel SAMA5Dx SoCs, providing access to specific aspects of the + integrated memory, bridge implementations, processor etc. + + This driver can also be built as a module. If so, the module + will be called sfr. diff --git a/drivers/soc/atmel/Makefile b/drivers/soc/atmel/Makefile index 7ca355d10553..d849a897cd77 100644 --- a/drivers/soc/atmel/Makefile +++ b/drivers/soc/atmel/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_AT91_SOC_ID) += soc.o +obj-$(CONFIG_AT91_SOC_SFR) += sfr.o diff --git a/drivers/soc/atmel/sfr.c b/drivers/soc/atmel/sfr.c new file mode 100644 index 000000000000..0525eef49d1a --- /dev/null +++ b/drivers/soc/atmel/sfr.c @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sfr.c - driver for special function registers + * + * Copyright (C) 2019 Bootlin. + * + */ +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/nvmem-provider.h> +#include <linux/random.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define SFR_SN0 0x4c +#define SFR_SN_SIZE 8 + +struct atmel_sfr_priv { + struct regmap *regmap; +}; + +static int atmel_sfr_read(void *context, unsigned int offset, + void *buf, size_t bytes) +{ + struct atmel_sfr_priv *priv = context; + + return regmap_bulk_read(priv->regmap, SFR_SN0 + offset, + buf, bytes / 4); +} + +static struct nvmem_config atmel_sfr_nvmem_config = { + .name = "atmel-sfr", + .read_only = true, + .word_size = 4, + .stride = 4, + .size = SFR_SN_SIZE, + .reg_read = atmel_sfr_read, +}; + +static int atmel_sfr_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct nvmem_device *nvmem; + struct atmel_sfr_priv *priv; + u8 sn[SFR_SN_SIZE]; + int ret; + + priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->regmap = syscon_node_to_regmap(np); + if (IS_ERR(priv->regmap)) { + dev_err(dev, "cannot get parent's regmap\n"); + return PTR_ERR(priv->regmap); + } + + atmel_sfr_nvmem_config.dev = dev; + atmel_sfr_nvmem_config.priv = priv; + + nvmem = devm_nvmem_register(dev, &atmel_sfr_nvmem_config); + if (IS_ERR(nvmem)) { + dev_err(dev, "error registering nvmem config\n"); + return PTR_ERR(nvmem); + } + + ret = atmel_sfr_read(priv, 0, sn, SFR_SN_SIZE); + if (ret == 0) + add_device_randomness(sn, SFR_SN_SIZE); + + return ret; +} + +static const struct of_device_id atmel_sfr_dt_ids[] = { + { + .compatible = "atmel,sama5d2-sfr", + }, { + .compatible = "atmel,sama5d4-sfr", + }, { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, atmel_sfr_dt_ids); + +static struct platform_driver atmel_sfr_driver = { + .probe = atmel_sfr_probe, + .driver = { + .name = "atmel-sfr", + .of_match_table = atmel_sfr_dt_ids, + }, +}; +module_platform_driver(atmel_sfr_driver); + +MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>"); +MODULE_DESCRIPTION("Atmel SFR SN driver for SAMA5D2/4 SoC family"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig index f9ad8ad54a7d..4df32bc4c7a6 100644 --- a/drivers/soc/fsl/Kconfig +++ b/drivers/soc/fsl/Kconfig @@ -40,4 +40,14 @@ config DPAA2_CONSOLE /dev/dpaa2_mc_console and /dev/dpaa2_aiop_console, which can be used to dump the Management Complex and AIOP firmware logs. + +config FSL_RCPM + bool "Freescale RCPM support" + depends on PM_SLEEP && (ARM || ARM64) + help + The NXP QorIQ Processors based on ARM Core have RCPM module + (Run Control and Power Management), which performs all device-level + tasks associated with power management, such as wakeup source control. + Note that currently this driver will not support PowerPC based + QorIQ processor. endmenu diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile index 71dee8d0d1f0..906f1cd8af01 100644 --- a/drivers/soc/fsl/Makefile +++ b/drivers/soc/fsl/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_FSL_DPAA) += qbman/ obj-$(CONFIG_QUICC_ENGINE) += qe/ obj-$(CONFIG_CPM) += qe/ +obj-$(CONFIG_FSL_RCPM) += rcpm.o obj-$(CONFIG_FSL_GUTS) += guts.o obj-$(CONFIG_FSL_MC_DPIO) += dpio/ obj-$(CONFIG_DPAA2_CONSOLE) += dpaa2-console.o diff --git a/drivers/soc/fsl/qbman/qman.c b/drivers/soc/fsl/qbman/qman.c index bf68d86d80ee..1e164e03410a 100644 --- a/drivers/soc/fsl/qbman/qman.c +++ b/drivers/soc/fsl/qbman/qman.c @@ -1749,6 +1749,13 @@ struct qman_portal *qman_get_affine_portal(int cpu) } EXPORT_SYMBOL(qman_get_affine_portal); +int qman_start_using_portal(struct qman_portal *p, struct device *dev) +{ + return (!device_link_add(dev, p->config->dev, + DL_FLAG_AUTOREMOVE_CONSUMER)) ? -EINVAL : 0; +} +EXPORT_SYMBOL(qman_start_using_portal); + int qman_p_poll_dqrr(struct qman_portal *p, unsigned int limit) { return __poll_portal_fast(p, limit); diff --git a/drivers/soc/fsl/rcpm.c b/drivers/soc/fsl/rcpm.c new file mode 100644 index 000000000000..a093dbe6d2cb --- /dev/null +++ b/drivers/soc/fsl/rcpm.c @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// rcpm.c - Freescale QorIQ RCPM driver +// +// Copyright 2019 NXP +// +// Author: Ran Wang <ran.wang_1@nxp.com> + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of_address.h> +#include <linux/slab.h> +#include <linux/suspend.h> +#include <linux/kernel.h> + +#define RCPM_WAKEUP_CELL_MAX_SIZE 7 + +struct rcpm { + unsigned int wakeup_cells; + void __iomem *ippdexpcr_base; + bool little_endian; +}; + +/** + * rcpm_pm_prepare - performs device-level tasks associated with power + * management, such as programming related to the wakeup source control. + * @dev: Device to handle. + * + */ +static int rcpm_pm_prepare(struct device *dev) +{ + int i, ret, idx; + void __iomem *base; + struct wakeup_source *ws; + struct rcpm *rcpm; + struct device_node *np = dev->of_node; + u32 value[RCPM_WAKEUP_CELL_MAX_SIZE + 1]; + u32 setting[RCPM_WAKEUP_CELL_MAX_SIZE] = {0}; + + rcpm = dev_get_drvdata(dev); + if (!rcpm) + return -EINVAL; + + base = rcpm->ippdexpcr_base; + idx = wakeup_sources_read_lock(); + + /* Begin with first registered wakeup source */ + for_each_wakeup_source(ws) { + + /* skip object which is not attached to device */ + if (!ws->dev || !ws->dev->parent) + continue; + + ret = device_property_read_u32_array(ws->dev->parent, + "fsl,rcpm-wakeup", value, + rcpm->wakeup_cells + 1); + + /* Wakeup source should refer to current rcpm device */ + if (ret || (np->phandle != value[0])) + continue; + + /* Property "#fsl,rcpm-wakeup-cells" of rcpm node defines the + * number of IPPDEXPCR register cells, and "fsl,rcpm-wakeup" + * of wakeup source IP contains an integer array: <phandle to + * RCPM node, IPPDEXPCR0 setting, IPPDEXPCR1 setting, + * IPPDEXPCR2 setting, etc>. + * + * So we will go thought them to collect setting data. + */ + for (i = 0; i < rcpm->wakeup_cells; i++) + setting[i] |= value[i + 1]; + } + + wakeup_sources_read_unlock(idx); + + /* Program all IPPDEXPCRn once */ + for (i = 0; i < rcpm->wakeup_cells; i++) { + u32 tmp = setting[i]; + void __iomem *address = base + i * 4; + + if (!tmp) + continue; + + /* We can only OR related bits */ + if (rcpm->little_endian) { + tmp |= ioread32(address); + iowrite32(tmp, address); + } else { + tmp |= ioread32be(address); + iowrite32be(tmp, address); + } + } + + return 0; +} + +static const struct dev_pm_ops rcpm_pm_ops = { + .prepare = rcpm_pm_prepare, +}; + +static int rcpm_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *r; + struct rcpm *rcpm; + int ret; + + rcpm = devm_kzalloc(dev, sizeof(*rcpm), GFP_KERNEL); + if (!rcpm) + return -ENOMEM; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) + return -ENODEV; + + rcpm->ippdexpcr_base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(rcpm->ippdexpcr_base)) { + ret = PTR_ERR(rcpm->ippdexpcr_base); + return ret; + } + + rcpm->little_endian = device_property_read_bool( + &pdev->dev, "little-endian"); + + ret = device_property_read_u32(&pdev->dev, + "#fsl,rcpm-wakeup-cells", &rcpm->wakeup_cells); + if (ret) + return ret; + + dev_set_drvdata(&pdev->dev, rcpm); + + return 0; +} + +static const struct of_device_id rcpm_of_match[] = { + { .compatible = "fsl,qoriq-rcpm-2.1+", }, + {} +}; +MODULE_DEVICE_TABLE(of, rcpm_of_match); + +static struct platform_driver rcpm_driver = { + .driver = { + .name = "rcpm", + .of_match_table = rcpm_of_match, + .pm = &rcpm_pm_ops, + }, + .probe = rcpm_probe, +}; + +module_platform_driver(rcpm_driver); diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c index d9231bd3c691..98b9d9a902ae 100644 --- a/drivers/soc/imx/gpc.c +++ b/drivers/soc/imx/gpc.c @@ -249,13 +249,13 @@ static struct genpd_power_state imx6_pm_domain_pu_state = { }; static struct imx_pm_domain imx_gpc_domains[] = { - [GPC_PGC_DOMAIN_ARM] { + [GPC_PGC_DOMAIN_ARM] = { .base = { .name = "ARM", .flags = GENPD_FLAG_ALWAYS_ON, }, }, - [GPC_PGC_DOMAIN_PU] { + [GPC_PGC_DOMAIN_PU] = { .base = { .name = "PU", .power_off = imx6_pm_domain_power_off, @@ -266,7 +266,7 @@ static struct imx_pm_domain imx_gpc_domains[] = { .reg_offs = 0x260, .cntr_pdn_bit = 0, }, - [GPC_PGC_DOMAIN_DISPLAY] { + [GPC_PGC_DOMAIN_DISPLAY] = { .base = { .name = "DISPLAY", .power_off = imx6_pm_domain_power_off, @@ -275,7 +275,7 @@ static struct imx_pm_domain imx_gpc_domains[] = { .reg_offs = 0x240, .cntr_pdn_bit = 4, }, - [GPC_PGC_DOMAIN_PCI] { + [GPC_PGC_DOMAIN_PCI] = { .base = { .name = "PCI", .power_off = imx6_pm_domain_power_off, diff --git a/drivers/soc/imx/soc-imx-scu.c b/drivers/soc/imx/soc-imx-scu.c index 50831ebf126a..fb70b8a3f7c5 100644 --- a/drivers/soc/imx/soc-imx-scu.c +++ b/drivers/soc/imx/soc-imx-scu.c @@ -33,12 +33,10 @@ struct imx_sc_msg_misc_get_soc_uid { u32 uid_high; } __packed; -static ssize_t soc_uid_show(struct device *dev, - struct device_attribute *attr, char *buf) +static int imx_scu_soc_uid(u64 *soc_uid) { struct imx_sc_msg_misc_get_soc_uid msg; struct imx_sc_rpc_msg *hdr = &msg.hdr; - u64 soc_uid; int ret; hdr->ver = IMX_SC_RPC_VERSION; @@ -46,21 +44,19 @@ static ssize_t soc_uid_show(struct device *dev, hdr->func = IMX_SC_MISC_FUNC_UNIQUE_ID; hdr->size = 1; - ret = imx_scu_call_rpc(soc_ipc_handle, &msg, false); + ret = imx_scu_call_rpc(soc_ipc_handle, &msg, true); if (ret) { pr_err("%s: get soc uid failed, ret %d\n", __func__, ret); return ret; } - soc_uid = msg.uid_high; - soc_uid <<= 32; - soc_uid |= msg.uid_low; + *soc_uid = msg.uid_high; + *soc_uid <<= 32; + *soc_uid |= msg.uid_low; - return sprintf(buf, "%016llX\n", soc_uid); + return 0; } -static DEVICE_ATTR_RO(soc_uid); - static int imx_scu_soc_id(void) { struct imx_sc_msg_misc_get_soc_id msg; @@ -89,6 +85,7 @@ static int imx_scu_soc_probe(struct platform_device *pdev) struct soc_device_attribute *soc_dev_attr; struct soc_device *soc_dev; int id, ret; + u64 uid = 0; u32 val; ret = imx_scu_get_handle(&soc_ipc_handle); @@ -112,6 +109,10 @@ static int imx_scu_soc_probe(struct platform_device *pdev) if (id < 0) return -EINVAL; + ret = imx_scu_soc_uid(&uid); + if (ret < 0) + return -EINVAL; + /* format soc_id value passed from SCU firmware */ val = id & 0x1f; soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "0x%x", val); @@ -130,19 +131,22 @@ static int imx_scu_soc_probe(struct platform_device *pdev) goto free_soc_id; } + soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", uid); + if (!soc_dev_attr->serial_number) { + ret = -ENOMEM; + goto free_revision; + } + soc_dev = soc_device_register(soc_dev_attr); if (IS_ERR(soc_dev)) { ret = PTR_ERR(soc_dev); - goto free_revision; + goto free_serial_number; } - ret = device_create_file(soc_device_to_device(soc_dev), - &dev_attr_soc_uid); - if (ret) - goto free_revision; - return 0; +free_serial_number: + kfree(soc_dev_attr->serial_number); free_revision: kfree(soc_dev_attr->revision); free_soc_id: diff --git a/drivers/soc/imx/soc-imx8.c b/drivers/soc/imx/soc-imx8.c index b9831576dd25..d84ed736cdb0 100644 --- a/drivers/soc/imx/soc-imx8.c +++ b/drivers/soc/imx/soc-imx8.c @@ -9,6 +9,7 @@ #include <linux/slab.h> #include <linux/sys_soc.h> #include <linux/platform_device.h> +#include <linux/arm-smccc.h> #include <linux/of.h> #define REV_B1 0x21 @@ -16,6 +17,8 @@ #define IMX8MQ_SW_INFO_B1 0x40 #define IMX8MQ_SW_MAGIC_B1 0xff0055aa +#define IMX_SIP_GET_SOC_INFO 0xc2000006 + #define OCOTP_UID_LOW 0x410 #define OCOTP_UID_HIGH 0x420 @@ -29,13 +32,21 @@ struct imx8_soc_data { static u64 soc_uid; -static ssize_t soc_uid_show(struct device *dev, - struct device_attribute *attr, char *buf) +#ifdef CONFIG_HAVE_ARM_SMCCC +static u32 imx8mq_soc_revision_from_atf(void) { - return sprintf(buf, "%016llX\n", soc_uid); -} + struct arm_smccc_res res; -static DEVICE_ATTR_RO(soc_uid); + arm_smccc_smc(IMX_SIP_GET_SOC_INFO, 0, 0, 0, 0, 0, 0, 0, &res); + + if (res.a0 == SMCCC_RET_NOT_SUPPORTED) + return 0; + else + return res.a0 & 0xff; +} +#else +static inline u32 imx8mq_soc_revision_from_atf(void) { return 0; }; +#endif static u32 __init imx8mq_soc_revision(void) { @@ -51,9 +62,16 @@ static u32 __init imx8mq_soc_revision(void) ocotp_base = of_iomap(np, 0); WARN_ON(!ocotp_base); - magic = readl_relaxed(ocotp_base + IMX8MQ_SW_INFO_B1); - if (magic == IMX8MQ_SW_MAGIC_B1) - rev = REV_B1; + /* + * SOC revision on older imx8mq is not available in fuses so query + * the value from ATF instead. + */ + rev = imx8mq_soc_revision_from_atf(); + if (!rev) { + magic = readl_relaxed(ocotp_base + IMX8MQ_SW_INFO_B1); + if (magic == IMX8MQ_SW_MAGIC_B1) + rev = REV_B1; + } soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH); soc_uid <<= 32; @@ -174,22 +192,25 @@ static int __init imx8_soc_init(void) goto free_soc; } + soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", soc_uid); + if (!soc_dev_attr->serial_number) { + ret = -ENOMEM; + goto free_rev; + } + soc_dev = soc_device_register(soc_dev_attr); if (IS_ERR(soc_dev)) { ret = PTR_ERR(soc_dev); - goto free_rev; + goto free_serial_number; } - ret = device_create_file(soc_device_to_device(soc_dev), - &dev_attr_soc_uid); - if (ret) - goto free_rev; - if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT)) platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0); return 0; +free_serial_number: + kfree(soc_dev_attr->serial_number); free_rev: if (strcmp(soc_dev_attr->revision, "unknown")) kfree(soc_dev_attr->revision); diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c index 7aa0517ff2f3..3c82de5f9417 100644 --- a/drivers/soc/mediatek/mtk-cmdq-helper.c +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c @@ -155,7 +155,7 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, err = cmdq_pkt_append_command(pkt, CMDQ_CODE_MASK, 0, ~mask); offset_mask |= CMDQ_WRITE_ENABLE_MASK; } - err |= cmdq_pkt_write(pkt, value, subsys, offset_mask); + err |= cmdq_pkt_write(pkt, subsys, offset_mask, value); return err; } diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c index 503222d0d0da..f669d3754627 100644 --- a/drivers/soc/mediatek/mtk-scpsys.c +++ b/drivers/soc/mediatek/mtk-scpsys.c @@ -21,7 +21,7 @@ #include <dt-bindings/power/mt8173-power.h> #define MTK_POLL_DELAY_US 10 -#define MTK_POLL_TIMEOUT (jiffies_to_usecs(HZ)) +#define MTK_POLL_TIMEOUT USEC_PER_SEC #define MTK_SCPD_ACTIVE_WAKEUP BIT(0) #define MTK_SCPD_FWAIT_SRAM BIT(1) @@ -108,6 +108,17 @@ static const char * const clk_names[] = { #define MAX_CLKS 3 +/** + * struct scp_domain_data - scp domain data for power on/off flow + * @name: The domain name. + * @sta_mask: The mask for power on/off status bit. + * @ctl_offs: The offset for main power control register. + * @sram_pdn_bits: The mask for sram power control bits. + * @sram_pdn_ack_bits: The mask for sram power control acked bits. + * @bus_prot_mask: The mask for single step bus protection. + * @clk_id: The basic clocks required by this power domain. + * @caps: The flag for active wake-up action. + */ struct scp_domain_data { const char *name; u32 sta_mask; @@ -180,32 +191,132 @@ static int scpsys_domain_is_on(struct scp_domain *scpd) return -EINVAL; } +static int scpsys_regulator_enable(struct scp_domain *scpd) +{ + if (!scpd->supply) + return 0; + + return regulator_enable(scpd->supply); +} + +static int scpsys_regulator_disable(struct scp_domain *scpd) +{ + if (!scpd->supply) + return 0; + + return regulator_disable(scpd->supply); +} + +static void scpsys_clk_disable(struct clk *clk[], int max_num) +{ + int i; + + for (i = max_num - 1; i >= 0; i--) + clk_disable_unprepare(clk[i]); +} + +static int scpsys_clk_enable(struct clk *clk[], int max_num) +{ + int i, ret = 0; + + for (i = 0; i < max_num && clk[i]; i++) { + ret = clk_prepare_enable(clk[i]); + if (ret) { + scpsys_clk_disable(clk, i); + break; + } + } + + return ret; +} + +static int scpsys_sram_enable(struct scp_domain *scpd, void __iomem *ctl_addr) +{ + u32 val; + u32 pdn_ack = scpd->data->sram_pdn_ack_bits; + int tmp; + + val = readl(ctl_addr); + val &= ~scpd->data->sram_pdn_bits; + writel(val, ctl_addr); + + /* Either wait until SRAM_PDN_ACK all 0 or have a force wait */ + if (MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) { + /* + * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for + * MT7622_POWER_DOMAIN_WB and thus just a trivial setup + * is applied here. + */ + usleep_range(12000, 12100); + } else { + /* Either wait until SRAM_PDN_ACK all 1 or 0 */ + int ret = readl_poll_timeout(ctl_addr, tmp, + (tmp & pdn_ack) == 0, + MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); + if (ret < 0) + return ret; + } + + return 0; +} + +static int scpsys_sram_disable(struct scp_domain *scpd, void __iomem *ctl_addr) +{ + u32 val; + u32 pdn_ack = scpd->data->sram_pdn_ack_bits; + int tmp; + + val = readl(ctl_addr); + val |= scpd->data->sram_pdn_bits; + writel(val, ctl_addr); + + /* Either wait until SRAM_PDN_ACK all 1 or 0 */ + return readl_poll_timeout(ctl_addr, tmp, + (tmp & pdn_ack) == pdn_ack, + MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); +} + +static int scpsys_bus_protect_enable(struct scp_domain *scpd) +{ + struct scp *scp = scpd->scp; + + if (!scpd->data->bus_prot_mask) + return 0; + + return mtk_infracfg_set_bus_protection(scp->infracfg, + scpd->data->bus_prot_mask, + scp->bus_prot_reg_update); +} + +static int scpsys_bus_protect_disable(struct scp_domain *scpd) +{ + struct scp *scp = scpd->scp; + + if (!scpd->data->bus_prot_mask) + return 0; + + return mtk_infracfg_clear_bus_protection(scp->infracfg, + scpd->data->bus_prot_mask, + scp->bus_prot_reg_update); +} + static int scpsys_power_on(struct generic_pm_domain *genpd) { struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd); struct scp *scp = scpd->scp; void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs; - u32 pdn_ack = scpd->data->sram_pdn_ack_bits; u32 val; int ret, tmp; - int i; - if (scpd->supply) { - ret = regulator_enable(scpd->supply); - if (ret) - return ret; - } - - for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) { - ret = clk_prepare_enable(scpd->clk[i]); - if (ret) { - for (--i; i >= 0; i--) - clk_disable_unprepare(scpd->clk[i]); + ret = scpsys_regulator_enable(scpd); + if (ret < 0) + return ret; - goto err_clk; - } - } + ret = scpsys_clk_enable(scpd->clk, MAX_CLKS); + if (ret) + goto err_clk; + /* subsys power on */ val = readl(ctl_addr); val |= PWR_ON_BIT; writel(val, ctl_addr); @@ -227,43 +338,20 @@ static int scpsys_power_on(struct generic_pm_domain *genpd) val |= PWR_RST_B_BIT; writel(val, ctl_addr); - val &= ~scpd->data->sram_pdn_bits; - writel(val, ctl_addr); - - /* Either wait until SRAM_PDN_ACK all 0 or have a force wait */ - if (MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) { - /* - * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for - * MT7622_POWER_DOMAIN_WB and thus just a trivial setup is - * applied here. - */ - usleep_range(12000, 12100); - - } else { - ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == 0, - MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); - if (ret < 0) - goto err_pwr_ack; - } + ret = scpsys_sram_enable(scpd, ctl_addr); + if (ret < 0) + goto err_pwr_ack; - if (scpd->data->bus_prot_mask) { - ret = mtk_infracfg_clear_bus_protection(scp->infracfg, - scpd->data->bus_prot_mask, - scp->bus_prot_reg_update); - if (ret) - goto err_pwr_ack; - } + ret = scpsys_bus_protect_disable(scpd); + if (ret < 0) + goto err_pwr_ack; return 0; err_pwr_ack: - for (i = MAX_CLKS - 1; i >= 0; i--) { - if (scpd->clk[i]) - clk_disable_unprepare(scpd->clk[i]); - } + scpsys_clk_disable(scpd->clk, MAX_CLKS); err_clk: - if (scpd->supply) - regulator_disable(scpd->supply); + scpsys_regulator_disable(scpd); dev_err(scp->dev, "Failed to power on domain %s\n", genpd->name); @@ -275,29 +363,19 @@ static int scpsys_power_off(struct generic_pm_domain *genpd) struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd); struct scp *scp = scpd->scp; void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs; - u32 pdn_ack = scpd->data->sram_pdn_ack_bits; u32 val; int ret, tmp; - int i; - - if (scpd->data->bus_prot_mask) { - ret = mtk_infracfg_set_bus_protection(scp->infracfg, - scpd->data->bus_prot_mask, - scp->bus_prot_reg_update); - if (ret) - goto out; - } - val = readl(ctl_addr); - val |= scpd->data->sram_pdn_bits; - writel(val, ctl_addr); + ret = scpsys_bus_protect_enable(scpd); + if (ret < 0) + goto out; - /* wait until SRAM_PDN_ACK all 1 */ - ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == pdn_ack, - MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT); + ret = scpsys_sram_disable(scpd, ctl_addr); if (ret < 0) goto out; + /* subsys power off */ + val = readl(ctl_addr); val |= PWR_ISO_BIT; writel(val, ctl_addr); @@ -319,11 +397,11 @@ static int scpsys_power_off(struct generic_pm_domain *genpd) if (ret < 0) goto out; - for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) - clk_disable_unprepare(scpd->clk[i]); + scpsys_clk_disable(scpd->clk, MAX_CLKS); - if (scpd->supply) - regulator_disable(scpd->supply); + ret = scpsys_regulator_disable(scpd); + if (ret < 0) + goto out; return 0; diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 661e47acc354..c6df8b43fa6d 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -58,17 +58,9 @@ config QCOM_LLCC depends on ARCH_QCOM || COMPILE_TEST help Qualcomm Technologies, Inc. platform specific - Last Level Cache Controller(LLCC) driver. This provides interfaces - to clients that use the LLCC. Say yes here to enable LLCC slice - driver. - -config QCOM_SDM845_LLCC - tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver" - depends on QCOM_LLCC - help - Say yes here to enable the LLCC driver for SDM845. This provides - data required to configure LLCC so that clients can start using the - LLCC slices. + Last Level Cache Controller(LLCC) driver for platforms such as, + SDM845. This provides interfaces to clients that use the LLCC. + Say yes here to enable LLCC slice driver. config QCOM_MDT_LOADER tristate diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index 162788701a77..2559fe948ce0 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -21,7 +21,6 @@ obj-$(CONFIG_QCOM_SMSM) += smsm.o obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o obj-$(CONFIG_QCOM_APR) += apr.o -obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o -obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o +obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o diff --git a/drivers/soc/qcom/llcc-slice.c b/drivers/soc/qcom/llcc-qcom.c index 9090ea12eaf3..429b5a60a1ba 100644 --- a/drivers/soc/qcom/llcc-slice.c +++ b/drivers/soc/qcom/llcc-qcom.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. * */ @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/of.h> #include <linux/of_device.h> #include <linux/regmap.h> #include <linux/sizes.h> @@ -46,15 +47,90 @@ #define BANK_OFFSET_STRIDE 0x80000 -static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER; +/** + * llcc_slice_config - Data associated with the llcc slice + * @usecase_id: Unique id for the client's use case + * @slice_id: llcc slice id for each client + * @max_cap: The maximum capacity of the cache slice provided in KB + * @priority: Priority of the client used to select victim line for replacement + * @fixed_size: Boolean indicating if the slice has a fixed capacity + * @bonus_ways: Bonus ways are additional ways to be used for any slice, + * if client ends up using more than reserved cache ways. Bonus + * ways are allocated only if they are not reserved for some + * other client. + * @res_ways: Reserved ways for the cache slice, the reserved ways cannot + * be used by any other client than the one its assigned to. + * @cache_mode: Each slice operates as a cache, this controls the mode of the + * slice: normal or TCM(Tightly Coupled Memory) + * @probe_target_ways: Determines what ways to probe for access hit. When + * configured to 1 only bonus and reserved ways are probed. + * When configured to 0 all ways in llcc are probed. + * @dis_cap_alloc: Disable capacity based allocation for a client + * @retain_on_pc: If this bit is set and client has maintained active vote + * then the ways assigned to this client are not flushed on power + * collapse. + * @activate_on_init: Activate the slice immediately after it is programmed + */ +struct llcc_slice_config { + u32 usecase_id; + u32 slice_id; + u32 max_cap; + u32 priority; + bool fixed_size; + u32 bonus_ways; + u32 res_ways; + u32 cache_mode; + u32 probe_target_ways; + bool dis_cap_alloc; + bool retain_on_pc; + bool activate_on_init; +}; + +struct qcom_llcc_config { + const struct llcc_slice_config *sct_data; + int size; +}; + +static const struct llcc_slice_config sc7180_data[] = { + { LLCC_CPUSS, 1, 256, 1, 0, 0xf, 0x0, 0, 0, 0, 1, 1 }, + { LLCC_MDM, 8, 128, 1, 0, 0xf, 0x0, 0, 0, 0, 1, 0 }, + { LLCC_GPUHTW, 11, 128, 1, 0, 0xf, 0x0, 0, 0, 0, 1, 0 }, + { LLCC_GPU, 12, 128, 1, 0, 0xf, 0x0, 0, 0, 0, 1, 0 }, +}; + +static const struct llcc_slice_config sdm845_data[] = { + { LLCC_CPUSS, 1, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 1 }, + { LLCC_VIDSC0, 2, 512, 2, 1, 0x0, 0x0f0, 0, 0, 1, 1, 0 }, + { LLCC_VIDSC1, 3, 512, 2, 1, 0x0, 0x0f0, 0, 0, 1, 1, 0 }, + { LLCC_ROTATOR, 4, 563, 2, 1, 0x0, 0x00e, 2, 0, 1, 1, 0 }, + { LLCC_VOICE, 5, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_AUDIO, 6, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_MDMHPGRW, 7, 1024, 2, 0, 0xfc, 0xf00, 0, 0, 1, 1, 0 }, + { LLCC_MDM, 8, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_CMPT, 10, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_GPUHTW, 11, 512, 1, 1, 0xc, 0x0, 0, 0, 1, 1, 0 }, + { LLCC_GPU, 12, 2304, 1, 0, 0xff0, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_MMUHWT, 13, 256, 2, 0, 0x0, 0x1, 0, 0, 1, 0, 1 }, + { LLCC_CMPTDMA, 15, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_DISP, 16, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_VIDFW, 17, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0 }, + { LLCC_MDMHPFX, 20, 1024, 2, 1, 0x0, 0xf00, 0, 0, 1, 1, 0 }, + { LLCC_MDMPNG, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0, 1, 1, 0 }, + { LLCC_AUDHW, 22, 1024, 1, 1, 0xffc, 0x2, 0, 0, 1, 1, 0 }, +}; + +static const struct qcom_llcc_config sc7180_cfg = { + .sct_data = sc7180_data, + .size = ARRAY_SIZE(sc7180_data), +}; -static const struct regmap_config llcc_regmap_config = { - .reg_bits = 32, - .reg_stride = 4, - .val_bits = 32, - .fast_io = true, +static const struct qcom_llcc_config sdm845_cfg = { + .sct_data = sdm845_data, + .size = ARRAY_SIZE(sdm845_data), }; +static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER; + /** * llcc_slice_getd - get llcc slice descriptor * @uid: usecase_id for the client @@ -301,19 +377,24 @@ static int qcom_llcc_cfg_program(struct platform_device *pdev) return ret; } -int qcom_llcc_remove(struct platform_device *pdev) +static int qcom_llcc_remove(struct platform_device *pdev) { /* Set the global pointer to a error code to avoid referencing it */ drv_data = ERR_PTR(-ENODEV); return 0; } -EXPORT_SYMBOL_GPL(qcom_llcc_remove); static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev, const char *name) { struct resource *res; void __iomem *base; + struct regmap_config llcc_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .fast_io = true, + }; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name); if (!res) @@ -323,16 +404,19 @@ static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev, if (IS_ERR(base)) return ERR_CAST(base); + llcc_regmap_config.name = name; return devm_regmap_init_mmio(&pdev->dev, base, &llcc_regmap_config); } -int qcom_llcc_probe(struct platform_device *pdev, - const struct llcc_slice_config *llcc_cfg, u32 sz) +static int qcom_llcc_probe(struct platform_device *pdev) { u32 num_banks; struct device *dev = &pdev->dev; int ret, i; struct platform_device *llcc_edac; + const struct qcom_llcc_config *cfg; + const struct llcc_slice_config *llcc_cfg; + u32 sz; drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL); if (!drv_data) { @@ -362,6 +446,10 @@ int qcom_llcc_probe(struct platform_device *pdev, num_banks >>= LLCC_LB_CNT_SHIFT; drv_data->num_banks = num_banks; + cfg = of_device_get_match_data(&pdev->dev); + llcc_cfg = cfg->sct_data; + sz = cfg->size; + for (i = 0; i < sz; i++) if (llcc_cfg[i].slice_id > drv_data->max_slices) drv_data->max_slices = llcc_cfg[i].slice_id; @@ -407,6 +495,22 @@ err: drv_data = ERR_PTR(-ENODEV); return ret; } -EXPORT_SYMBOL_GPL(qcom_llcc_probe); -MODULE_LICENSE("GPL v2"); + +static const struct of_device_id qcom_llcc_of_match[] = { + { .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfg }, + { .compatible = "qcom,sdm845-llcc", .data = &sdm845_cfg }, + { } +}; + +static struct platform_driver qcom_llcc_driver = { + .driver = { + .name = "qcom-llcc", + .of_match_table = qcom_llcc_of_match, + }, + .probe = qcom_llcc_probe, + .remove = qcom_llcc_remove, +}; +module_platform_driver(qcom_llcc_driver); + MODULE_DESCRIPTION("Qualcomm Last Level Cache Controller"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/soc/qcom/llcc-sdm845.c b/drivers/soc/qcom/llcc-sdm845.c deleted file mode 100644 index 86600d97c36d..000000000000 --- a/drivers/soc/qcom/llcc-sdm845.c +++ /dev/null @@ -1,100 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/soc/qcom/llcc-qcom.h> - -/* - * SCT(System Cache Table) entry contains of the following members: - * usecase_id: Unique id for the client's use case - * slice_id: llcc slice id for each client - * max_cap: The maximum capacity of the cache slice provided in KB - * priority: Priority of the client used to select victim line for replacement - * fixed_size: Boolean indicating if the slice has a fixed capacity - * bonus_ways: Bonus ways are additional ways to be used for any slice, - * if client ends up using more than reserved cache ways. Bonus - * ways are allocated only if they are not reserved for some - * other client. - * res_ways: Reserved ways for the cache slice, the reserved ways cannot - * be used by any other client than the one its assigned to. - * cache_mode: Each slice operates as a cache, this controls the mode of the - * slice: normal or TCM(Tightly Coupled Memory) - * probe_target_ways: Determines what ways to probe for access hit. When - * configured to 1 only bonus and reserved ways are probed. - * When configured to 0 all ways in llcc are probed. - * dis_cap_alloc: Disable capacity based allocation for a client - * retain_on_pc: If this bit is set and client has maintained active vote - * then the ways assigned to this client are not flushed on power - * collapse. - * activate_on_init: Activate the slice immediately after the SCT is programmed - */ -#define SCT_ENTRY(uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, rp, a) \ - { \ - .usecase_id = uid, \ - .slice_id = sid, \ - .max_cap = mc, \ - .priority = p, \ - .fixed_size = fs, \ - .bonus_ways = bway, \ - .res_ways = rway, \ - .cache_mode = cmod, \ - .probe_target_ways = ptw, \ - .dis_cap_alloc = dca, \ - .retain_on_pc = rp, \ - .activate_on_init = a, \ - } - -static struct llcc_slice_config sdm845_data[] = { - SCT_ENTRY(LLCC_CPUSS, 1, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 1), - SCT_ENTRY(LLCC_VIDSC0, 2, 512, 2, 1, 0x0, 0x0f0, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_VIDSC1, 3, 512, 2, 1, 0x0, 0x0f0, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_ROTATOR, 4, 563, 2, 1, 0x0, 0x00e, 2, 0, 1, 1, 0), - SCT_ENTRY(LLCC_VOICE, 5, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_AUDIO, 6, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_MDMHPGRW, 7, 1024, 2, 0, 0xfc, 0xf00, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_MDM, 8, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_CMPT, 10, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_GPUHTW, 11, 512, 1, 1, 0xc, 0x0, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_GPU, 12, 2304, 1, 0, 0xff0, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_MMUHWT, 13, 256, 2, 0, 0x0, 0x1, 0, 0, 1, 0, 1), - SCT_ENTRY(LLCC_CMPTDMA, 15, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_DISP, 16, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_VIDFW, 17, 2816, 1, 0, 0xffc, 0x2, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_MDMHPFX, 20, 1024, 2, 1, 0x0, 0xf00, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_MDMPNG, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0, 1, 1, 0), - SCT_ENTRY(LLCC_AUDHW, 22, 1024, 1, 1, 0xffc, 0x2, 0, 0, 1, 1, 0), -}; - -static int sdm845_qcom_llcc_remove(struct platform_device *pdev) -{ - return qcom_llcc_remove(pdev); -} - -static int sdm845_qcom_llcc_probe(struct platform_device *pdev) -{ - return qcom_llcc_probe(pdev, sdm845_data, ARRAY_SIZE(sdm845_data)); -} - -static const struct of_device_id sdm845_qcom_llcc_of_match[] = { - { .compatible = "qcom,sdm845-llcc", }, - { } -}; - -static struct platform_driver sdm845_qcom_llcc_driver = { - .driver = { - .name = "sdm845-llcc", - .of_match_table = sdm845_qcom_llcc_of_match, - }, - .probe = sdm845_qcom_llcc_probe, - .remove = sdm845_qcom_llcc_remove, -}; -module_platform_driver(sdm845_qcom_llcc_driver); - -MODULE_DESCRIPTION("QCOM sdm845 LLCC driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c index 33a27e6c6d67..006ac40c526a 100644 --- a/drivers/soc/qcom/qcom_aoss.c +++ b/drivers/soc/qcom/qcom_aoss.c @@ -44,7 +44,7 @@ #define QMP_NUM_COOLING_RESOURCES 2 -static bool qmp_cdev_init_state = 1; +static bool qmp_cdev_max_state = 1; struct qmp_cooling_device { struct thermal_cooling_device *cdev; @@ -402,7 +402,7 @@ static void qmp_pd_remove(struct qmp *qmp) static int qmp_cdev_get_max_state(struct thermal_cooling_device *cdev, unsigned long *state) { - *state = qmp_cdev_init_state; + *state = qmp_cdev_max_state; return 0; } @@ -432,7 +432,7 @@ static int qmp_cdev_set_cur_state(struct thermal_cooling_device *cdev, snprintf(buf, sizeof(buf), "{class: volt_flr, event:zero_temp, res:%s, value:%s}", qmp_cdev->name, - cdev_state ? "off" : "on"); + cdev_state ? "on" : "off"); ret = qmp_send(qmp_cdev->qmp, buf, sizeof(buf)); @@ -455,7 +455,7 @@ static int qmp_cooling_device_add(struct qmp *qmp, char *cdev_name = (char *)node->name; qmp_cdev->qmp = qmp; - qmp_cdev->state = qmp_cdev_init_state; + qmp_cdev->state = !qmp_cdev_max_state; qmp_cdev->name = cdev_name; qmp_cdev->cdev = devm_thermal_of_cooling_device_register (qmp->dev, node, diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c index 3c1a55cf25d6..2b1834c5609a 100644 --- a/drivers/soc/qcom/rpmpd.c +++ b/drivers/soc/qcom/rpmpd.c @@ -115,6 +115,28 @@ struct rpmpd_desc { static DEFINE_MUTEX(rpmpd_lock); +/* msm8976 RPM Power Domains */ +DEFINE_RPMPD_PAIR(msm8976, vddcx, vddcx_ao, SMPA, LEVEL, 2); +DEFINE_RPMPD_PAIR(msm8976, vddmx, vddmx_ao, SMPA, LEVEL, 6); + +DEFINE_RPMPD_VFL(msm8976, vddcx_vfl, RWSC, 2); +DEFINE_RPMPD_VFL(msm8976, vddmx_vfl, RWSM, 6); + +static struct rpmpd *msm8976_rpmpds[] = { + [MSM8976_VDDCX] = &msm8976_vddcx, + [MSM8976_VDDCX_AO] = &msm8976_vddcx_ao, + [MSM8976_VDDCX_VFL] = &msm8976_vddcx_vfl, + [MSM8976_VDDMX] = &msm8976_vddmx, + [MSM8976_VDDMX_AO] = &msm8976_vddmx_ao, + [MSM8976_VDDMX_VFL] = &msm8976_vddmx_vfl, +}; + +static const struct rpmpd_desc msm8976_desc = { + .rpmpds = msm8976_rpmpds, + .num_pds = ARRAY_SIZE(msm8976_rpmpds), + .max_state = RPM_SMD_LEVEL_TURBO_HIGH, +}; + /* msm8996 RPM Power domains */ DEFINE_RPMPD_PAIR(msm8996, vddcx, vddcx_ao, SMPA, CORNER, 1); DEFINE_RPMPD_PAIR(msm8996, vddmx, vddmx_ao, SMPA, CORNER, 2); @@ -198,6 +220,7 @@ static const struct rpmpd_desc qcs404_desc = { }; static const struct of_device_id rpmpd_match_table[] = { + { .compatible = "qcom,msm8976-rpmpd", .data = &msm8976_desc }, { .compatible = "qcom,msm8996-rpmpd", .data = &msm8996_desc }, { .compatible = "qcom,msm8998-rpmpd", .data = &msm8998_desc }, { .compatible = "qcom,qcs404-rpmpd", .data = &qcs404_desc }, diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c index fa9dd12b5e39..005dd30c58fa 100644 --- a/drivers/soc/qcom/smd-rpm.c +++ b/drivers/soc/qcom/smd-rpm.c @@ -19,12 +19,14 @@ /** * struct qcom_smd_rpm - state of the rpm device driver * @rpm_channel: reference to the smd channel + * @icc: interconnect proxy device * @ack: completion for acks * @lock: mutual exclusion around the send/complete pair * @ack_status: result of the rpm request */ struct qcom_smd_rpm { struct rpmsg_endpoint *rpm_channel; + struct platform_device *icc; struct device *dev; struct completion ack; @@ -193,6 +195,7 @@ static int qcom_smd_rpm_callback(struct rpmsg_device *rpdev, static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev) { struct qcom_smd_rpm *rpm; + int ret; rpm = devm_kzalloc(&rpdev->dev, sizeof(*rpm), GFP_KERNEL); if (!rpm) @@ -205,11 +208,23 @@ static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev) rpm->rpm_channel = rpdev->ept; dev_set_drvdata(&rpdev->dev, rpm); - return of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev); + rpm->icc = platform_device_register_data(&rpdev->dev, "icc_smd_rpm", -1, + NULL, 0); + if (IS_ERR(rpm->icc)) + return PTR_ERR(rpm->icc); + + ret = of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev); + if (ret) + platform_device_unregister(rpm->icc); + + return ret; } static void qcom_smd_rpm_remove(struct rpmsg_device *rpdev) { + struct qcom_smd_rpm *rpm = dev_get_drvdata(&rpdev->dev); + + platform_device_unregister(rpm->icc); of_platform_depopulate(&rpdev->dev); } @@ -217,6 +232,7 @@ static const struct of_device_id qcom_smd_rpm_of_match[] = { { .compatible = "qcom,rpm-apq8084" }, { .compatible = "qcom,rpm-msm8916" }, { .compatible = "qcom,rpm-msm8974" }, + { .compatible = "qcom,rpm-msm8976" }, { .compatible = "qcom,rpm-msm8996" }, { .compatible = "qcom,rpm-msm8998" }, { .compatible = "qcom,rpm-sdm660" }, diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c index a39ea5061dc5..7864b75ce569 100644 --- a/drivers/soc/qcom/socinfo.c +++ b/drivers/soc/qcom/socinfo.c @@ -198,6 +198,8 @@ static const struct soc_id soc_id[] = { { 310, "MSM8996AU" }, { 311, "APQ8096AU" }, { 312, "APQ8096SG" }, + { 321, "SDM845" }, + { 341, "SDA845" }, }; static const char *socinfo_machine(struct device *dev, unsigned int id) diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig index 3c5e017bacba..f93492b72c04 100644 --- a/drivers/soc/renesas/Kconfig +++ b/drivers/soc/renesas/Kconfig @@ -178,6 +178,13 @@ config ARCH_R8A774A1 help This enables support for the Renesas RZ/G2M SoC. +config ARCH_R8A774B1 + bool "Renesas RZ/G2N SoC Platform" + select ARCH_RCAR_GEN3 + select SYSC_R8A774B1 + help + This enables support for the Renesas RZ/G2N SoC. + config ARCH_R8A774C0 bool "Renesas RZ/G2E SoC Platform" select ARCH_RCAR_GEN3 @@ -192,13 +199,24 @@ config ARCH_R8A7795 help This enables support for the Renesas R-Car H3 SoC. +config ARCH_R8A77960 + bool + select ARCH_RCAR_GEN3 + select SYSC_R8A77960 + config ARCH_R8A7796 bool "Renesas R-Car M3-W SoC Platform" - select ARCH_RCAR_GEN3 - select SYSC_R8A7796 + select ARCH_R8A77960 help This enables support for the Renesas R-Car M3-W SoC. +config ARCH_R8A77961 + bool "Renesas R-Car M3-W+ SoC Platform" + select ARCH_RCAR_GEN3 + select SYSC_R8A77961 + help + This enables support for the Renesas R-Car M3-W+ SoC. + config ARCH_R8A77965 bool "Renesas R-Car M3-N SoC Platform" select ARCH_RCAR_GEN3 @@ -253,6 +271,10 @@ config SYSC_R8A774A1 bool "RZ/G2M System Controller support" if COMPILE_TEST select SYSC_RCAR +config SYSC_R8A774B1 + bool "RZ/G2N System Controller support" if COMPILE_TEST + select SYSC_RCAR + config SYSC_R8A774C0 bool "RZ/G2E System Controller support" if COMPILE_TEST select SYSC_RCAR @@ -281,10 +303,14 @@ config SYSC_R8A7795 bool "R-Car H3 System Controller support" if COMPILE_TEST select SYSC_RCAR -config SYSC_R8A7796 +config SYSC_R8A77960 bool "R-Car M3-W System Controller support" if COMPILE_TEST select SYSC_RCAR +config SYSC_R8A77961 + bool "R-Car M3-W+ System Controller support" if COMPILE_TEST + select SYSC_RCAR + config SYSC_R8A77965 bool "R-Car M3-N System Controller support" if COMPILE_TEST select SYSC_RCAR diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile index 00764d5a60b3..e595c3c3bd10 100644 --- a/drivers/soc/renesas/Makefile +++ b/drivers/soc/renesas/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_SYSC_R8A7743) += r8a7743-sysc.o obj-$(CONFIG_SYSC_R8A7745) += r8a7745-sysc.o obj-$(CONFIG_SYSC_R8A77470) += r8a77470-sysc.o obj-$(CONFIG_SYSC_R8A774A1) += r8a774a1-sysc.o +obj-$(CONFIG_SYSC_R8A774B1) += r8a774b1-sysc.o obj-$(CONFIG_SYSC_R8A774C0) += r8a774c0-sysc.o obj-$(CONFIG_SYSC_R8A7779) += r8a7779-sysc.o obj-$(CONFIG_SYSC_R8A7790) += r8a7790-sysc.o @@ -14,7 +15,8 @@ obj-$(CONFIG_SYSC_R8A7791) += r8a7791-sysc.o obj-$(CONFIG_SYSC_R8A7792) += r8a7792-sysc.o obj-$(CONFIG_SYSC_R8A7794) += r8a7794-sysc.o obj-$(CONFIG_SYSC_R8A7795) += r8a7795-sysc.o -obj-$(CONFIG_SYSC_R8A7796) += r8a7796-sysc.o +obj-$(CONFIG_SYSC_R8A77960) += r8a7796-sysc.o +obj-$(CONFIG_SYSC_R8A77961) += r8a7796-sysc.o obj-$(CONFIG_SYSC_R8A77965) += r8a77965-sysc.o obj-$(CONFIG_SYSC_R8A77970) += r8a77970-sysc.o obj-$(CONFIG_SYSC_R8A77980) += r8a77980-sysc.o diff --git a/drivers/soc/renesas/r8a7743-sysc.c b/drivers/soc/renesas/r8a7743-sysc.c index edf6436e879f..4e2c0ab951b3 100644 --- a/drivers/soc/renesas/r8a7743-sysc.c +++ b/drivers/soc/renesas/r8a7743-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2016 Cogent Embedded Inc. */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a7743-sysc.h> diff --git a/drivers/soc/renesas/r8a7745-sysc.c b/drivers/soc/renesas/r8a7745-sysc.c index 65dc6b09cc85..865821a2f0c6 100644 --- a/drivers/soc/renesas/r8a7745-sysc.c +++ b/drivers/soc/renesas/r8a7745-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2016 Cogent Embedded Inc. */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a7745-sysc.h> diff --git a/drivers/soc/renesas/r8a77470-sysc.c b/drivers/soc/renesas/r8a77470-sysc.c index cfa015e208ef..1eeb8018df50 100644 --- a/drivers/soc/renesas/r8a77470-sysc.c +++ b/drivers/soc/renesas/r8a77470-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2018 Renesas Electronics Corp. */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a77470-sysc.h> diff --git a/drivers/soc/renesas/r8a774a1-sysc.c b/drivers/soc/renesas/r8a774a1-sysc.c index 9db51ff6f5ed..38ac2c689ff0 100644 --- a/drivers/soc/renesas/r8a774a1-sysc.c +++ b/drivers/soc/renesas/r8a774a1-sysc.c @@ -7,7 +7,6 @@ * Copyright (C) 2016 Glider bvba */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a774a1-sysc.h> diff --git a/drivers/soc/renesas/r8a774b1-sysc.c b/drivers/soc/renesas/r8a774b1-sysc.c new file mode 100644 index 000000000000..5f97ff26f3f8 --- /dev/null +++ b/drivers/soc/renesas/r8a774b1-sysc.c @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas RZ/G2N System Controller + * Copyright (C) 2019 Renesas Electronics Corp. + * + * Based on Renesas R-Car M3-W System Controller + * Copyright (C) 2016 Glider bvba + */ + +#include <linux/bits.h> +#include <linux/kernel.h> + +#include <dt-bindings/power/r8a774b1-sysc.h> + +#include "rcar-sysc.h" + +static const struct rcar_sysc_area r8a774b1_areas[] __initconst = { + { "always-on", 0, 0, R8A774B1_PD_ALWAYS_ON, -1, PD_ALWAYS_ON }, + { "ca57-scu", 0x1c0, 0, R8A774B1_PD_CA57_SCU, R8A774B1_PD_ALWAYS_ON, + PD_SCU }, + { "ca57-cpu0", 0x80, 0, R8A774B1_PD_CA57_CPU0, R8A774B1_PD_CA57_SCU, + PD_CPU_NOCR }, + { "ca57-cpu1", 0x80, 1, R8A774B1_PD_CA57_CPU1, R8A774B1_PD_CA57_SCU, + PD_CPU_NOCR }, + { "a3vc", 0x380, 0, R8A774B1_PD_A3VC, R8A774B1_PD_ALWAYS_ON }, + { "a3vp", 0x340, 0, R8A774B1_PD_A3VP, R8A774B1_PD_ALWAYS_ON }, + { "a2vc1", 0x3c0, 1, R8A774B1_PD_A2VC1, R8A774B1_PD_A3VC }, + { "3dg-a", 0x100, 0, R8A774B1_PD_3DG_A, R8A774B1_PD_ALWAYS_ON }, + { "3dg-b", 0x100, 1, R8A774B1_PD_3DG_B, R8A774B1_PD_3DG_A }, +}; + +const struct rcar_sysc_info r8a774b1_sysc_info __initconst = { + .areas = r8a774b1_areas, + .num_areas = ARRAY_SIZE(r8a774b1_areas), + .extmask_offs = 0x2f8, + .extmask_val = BIT(0), +}; diff --git a/drivers/soc/renesas/r8a774c0-sysc.c b/drivers/soc/renesas/r8a774c0-sysc.c index 11050e17ea81..c1c216f7d073 100644 --- a/drivers/soc/renesas/r8a774c0-sysc.c +++ b/drivers/soc/renesas/r8a774c0-sysc.c @@ -6,7 +6,7 @@ * Based on Renesas R-Car E3 System Controller */ -#include <linux/bug.h> +#include <linux/bits.h> #include <linux/kernel.h> #include <linux/sys_soc.h> @@ -50,4 +50,6 @@ const struct rcar_sysc_info r8a774c0_sysc_info __initconst = { .init = r8a774c0_sysc_init, .areas = r8a774c0_areas, .num_areas = ARRAY_SIZE(r8a774c0_areas), + .extmask_offs = 0x2f8, + .extmask_val = BIT(0), }; diff --git a/drivers/soc/renesas/r8a7779-sysc.c b/drivers/soc/renesas/r8a7779-sysc.c index 517aa40fa6e6..e24a7151d55f 100644 --- a/drivers/soc/renesas/r8a7779-sysc.c +++ b/drivers/soc/renesas/r8a7779-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2016 Glider bvba */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a7779-sysc.h> diff --git a/drivers/soc/renesas/r8a7790-sysc.c b/drivers/soc/renesas/r8a7790-sysc.c index 9b5a6bb62152..b9afe7f6245b 100644 --- a/drivers/soc/renesas/r8a7790-sysc.c +++ b/drivers/soc/renesas/r8a7790-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2016 Glider bvba */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a7790-sysc.h> diff --git a/drivers/soc/renesas/r8a7791-sysc.c b/drivers/soc/renesas/r8a7791-sysc.c index acf545cdebfb..f00fa24522a3 100644 --- a/drivers/soc/renesas/r8a7791-sysc.c +++ b/drivers/soc/renesas/r8a7791-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2016 Glider bvba */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a7791-sysc.h> diff --git a/drivers/soc/renesas/r8a7792-sysc.c b/drivers/soc/renesas/r8a7792-sysc.c index 05b78525cc43..60aae242c43f 100644 --- a/drivers/soc/renesas/r8a7792-sysc.c +++ b/drivers/soc/renesas/r8a7792-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2016 Cogent Embedded Inc. */ -#include <linux/bug.h> #include <linux/init.h> #include <linux/kernel.h> diff --git a/drivers/soc/renesas/r8a7794-sysc.c b/drivers/soc/renesas/r8a7794-sysc.c index 0d42637fa662..72ef4e85458f 100644 --- a/drivers/soc/renesas/r8a7794-sysc.c +++ b/drivers/soc/renesas/r8a7794-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2016 Glider bvba */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a7794-sysc.h> diff --git a/drivers/soc/renesas/r8a7795-sysc.c b/drivers/soc/renesas/r8a7795-sysc.c index cda27a67de98..91074411b8cf 100644 --- a/drivers/soc/renesas/r8a7795-sysc.c +++ b/drivers/soc/renesas/r8a7795-sysc.c @@ -5,7 +5,7 @@ * Copyright (C) 2016-2017 Glider bvba */ -#include <linux/bug.h> +#include <linux/bits.h> #include <linux/kernel.h> #include <linux/sys_soc.h> @@ -51,25 +51,46 @@ static struct rcar_sysc_area r8a7795_areas[] __initdata = { /* - * Fixups for R-Car H3 revisions after ES1.x + * Fixups for R-Car H3 revisions */ -static const struct soc_device_attribute r8a7795es1[] __initconst = { - { .soc_id = "r8a7795", .revision = "ES1.*" }, +#define HAS_A2VC0 BIT(0) /* Power domain A2VC0 is present */ +#define NO_EXTMASK BIT(1) /* Missing SYSCEXTMASK register */ + +static const struct soc_device_attribute r8a7795_quirks_match[] __initconst = { + { + .soc_id = "r8a7795", .revision = "ES1.*", + .data = (void *)(HAS_A2VC0 | NO_EXTMASK), + }, { + .soc_id = "r8a7795", .revision = "ES2.*", + .data = (void *)(NO_EXTMASK), + }, { /* sentinel */ } }; static int __init r8a7795_sysc_init(void) { - if (!soc_device_match(r8a7795es1)) + const struct soc_device_attribute *attr; + u32 quirks = 0; + + attr = soc_device_match(r8a7795_quirks_match); + if (attr) + quirks = (uintptr_t)attr->data; + + if (!(quirks & HAS_A2VC0)) rcar_sysc_nullify(r8a7795_areas, ARRAY_SIZE(r8a7795_areas), R8A7795_PD_A2VC0); + if (quirks & NO_EXTMASK) + r8a7795_sysc_info.extmask_val = 0; + return 0; } -const struct rcar_sysc_info r8a7795_sysc_info __initconst = { +struct rcar_sysc_info r8a7795_sysc_info __initdata = { .init = r8a7795_sysc_init, .areas = r8a7795_areas, .num_areas = ARRAY_SIZE(r8a7795_areas), + .extmask_offs = 0x2f8, + .extmask_val = BIT(0), }; diff --git a/drivers/soc/renesas/r8a7796-sysc.c b/drivers/soc/renesas/r8a7796-sysc.c index 1b06f868b6e8..471bd5b3b6ad 100644 --- a/drivers/soc/renesas/r8a7796-sysc.c +++ b/drivers/soc/renesas/r8a7796-sysc.c @@ -1,18 +1,19 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Renesas R-Car M3-W System Controller + * Renesas R-Car M3-W/W+ System Controller * * Copyright (C) 2016 Glider bvba + * Copyright (C) 2018-2019 Renesas Electronics Corporation */ -#include <linux/bug.h> +#include <linux/bits.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a7796-sysc.h> #include "rcar-sysc.h" -static const struct rcar_sysc_area r8a7796_areas[] __initconst = { +static struct rcar_sysc_area r8a7796_areas[] __initdata = { { "always-on", 0, 0, R8A7796_PD_ALWAYS_ON, -1, PD_ALWAYS_ON }, { "ca57-scu", 0x1c0, 0, R8A7796_PD_CA57_SCU, R8A7796_PD_ALWAYS_ON, PD_SCU }, @@ -39,7 +40,28 @@ static const struct rcar_sysc_area r8a7796_areas[] __initconst = { { "a3ir", 0x180, 0, R8A7796_PD_A3IR, R8A7796_PD_ALWAYS_ON }, }; -const struct rcar_sysc_info r8a7796_sysc_info __initconst = { + +#ifdef CONFIG_SYSC_R8A77960 +const struct rcar_sysc_info r8a77960_sysc_info __initconst = { + .areas = r8a7796_areas, + .num_areas = ARRAY_SIZE(r8a7796_areas), +}; +#endif /* CONFIG_SYSC_R8A77960 */ + +#ifdef CONFIG_SYSC_R8A77961 +static int __init r8a77961_sysc_init(void) +{ + rcar_sysc_nullify(r8a7796_areas, ARRAY_SIZE(r8a7796_areas), + R8A7796_PD_A2VC0); + + return 0; +} + +const struct rcar_sysc_info r8a77961_sysc_info __initconst = { + .init = r8a77961_sysc_init, .areas = r8a7796_areas, .num_areas = ARRAY_SIZE(r8a7796_areas), + .extmask_offs = 0x2f8, + .extmask_val = BIT(0), }; +#endif /* CONFIG_SYSC_R8A77961 */ diff --git a/drivers/soc/renesas/r8a77965-sysc.c b/drivers/soc/renesas/r8a77965-sysc.c index e0533beb50fd..ff0b0d116992 100644 --- a/drivers/soc/renesas/r8a77965-sysc.c +++ b/drivers/soc/renesas/r8a77965-sysc.c @@ -7,7 +7,7 @@ * Copyright (C) 2016 Glider bvba */ -#include <linux/bug.h> +#include <linux/bits.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a77965-sysc.h> @@ -33,4 +33,6 @@ static const struct rcar_sysc_area r8a77965_areas[] __initconst = { const struct rcar_sysc_info r8a77965_sysc_info __initconst = { .areas = r8a77965_areas, .num_areas = ARRAY_SIZE(r8a77965_areas), + .extmask_offs = 0x2f8, + .extmask_val = BIT(0), }; diff --git a/drivers/soc/renesas/r8a77970-sysc.c b/drivers/soc/renesas/r8a77970-sysc.c index 280c48b80f24..706258250600 100644 --- a/drivers/soc/renesas/r8a77970-sysc.c +++ b/drivers/soc/renesas/r8a77970-sysc.c @@ -5,7 +5,7 @@ * Copyright (C) 2017 Cogent Embedded Inc. */ -#include <linux/bug.h> +#include <linux/bits.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a77970-sysc.h> @@ -32,4 +32,6 @@ static const struct rcar_sysc_area r8a77970_areas[] __initconst = { const struct rcar_sysc_info r8a77970_sysc_info __initconst = { .areas = r8a77970_areas, .num_areas = ARRAY_SIZE(r8a77970_areas), + .extmask_offs = 0x1b0, + .extmask_val = BIT(0), }; diff --git a/drivers/soc/renesas/r8a77980-sysc.c b/drivers/soc/renesas/r8a77980-sysc.c index a8dbe55e8ba8..39ca84a67daa 100644 --- a/drivers/soc/renesas/r8a77980-sysc.c +++ b/drivers/soc/renesas/r8a77980-sysc.c @@ -6,7 +6,7 @@ * Copyright (C) 2018 Cogent Embedded, Inc. */ -#include <linux/bug.h> +#include <linux/bits.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a77980-sysc.h> @@ -49,4 +49,6 @@ static const struct rcar_sysc_area r8a77980_areas[] __initconst = { const struct rcar_sysc_info r8a77980_sysc_info __initconst = { .areas = r8a77980_areas, .num_areas = ARRAY_SIZE(r8a77980_areas), + .extmask_offs = 0x138, + .extmask_val = BIT(0), }; diff --git a/drivers/soc/renesas/r8a77990-sysc.c b/drivers/soc/renesas/r8a77990-sysc.c index 664b244eb1dd..9f92737dc352 100644 --- a/drivers/soc/renesas/r8a77990-sysc.c +++ b/drivers/soc/renesas/r8a77990-sysc.c @@ -5,7 +5,7 @@ * Copyright (C) 2018 Renesas Electronics Corp. */ -#include <linux/bug.h> +#include <linux/bits.h> #include <linux/kernel.h> #include <linux/sys_soc.h> @@ -50,4 +50,6 @@ const struct rcar_sysc_info r8a77990_sysc_info __initconst = { .init = r8a77990_sysc_init, .areas = r8a77990_areas, .num_areas = ARRAY_SIZE(r8a77990_areas), + .extmask_offs = 0x2f8, + .extmask_val = BIT(0), }; diff --git a/drivers/soc/renesas/r8a77995-sysc.c b/drivers/soc/renesas/r8a77995-sysc.c index 6243aaaf60fb..efcc67e3d76d 100644 --- a/drivers/soc/renesas/r8a77995-sysc.c +++ b/drivers/soc/renesas/r8a77995-sysc.c @@ -5,7 +5,6 @@ * Copyright (C) 2017 Glider bvba */ -#include <linux/bug.h> #include <linux/kernel.h> #include <dt-bindings/power/r8a77995-sysc.h> diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c index d183c381e8db..14d05a070dd3 100644 --- a/drivers/soc/renesas/rcar-rst.c +++ b/drivers/soc/renesas/rcar-rst.c @@ -45,6 +45,7 @@ static const struct of_device_id rcar_rst_matches[] __initconst = { { .compatible = "renesas,r8a77470-rst", .data = &rcar_rst_gen2 }, /* RZ/G2 is handled like R-Car Gen3 */ { .compatible = "renesas,r8a774a1-rst", .data = &rcar_rst_gen3 }, + { .compatible = "renesas,r8a774b1-rst", .data = &rcar_rst_gen3 }, { .compatible = "renesas,r8a774c0-rst", .data = &rcar_rst_gen3 }, /* R-Car Gen1 */ { .compatible = "renesas,r8a7778-reset-wdt", .data = &rcar_rst_gen1 }, @@ -58,6 +59,7 @@ static const struct of_device_id rcar_rst_matches[] __initconst = { /* R-Car Gen3 */ { .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen3 }, { .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen3 }, + { .compatible = "renesas,r8a77961-rst", .data = &rcar_rst_gen3 }, { .compatible = "renesas,r8a77965-rst", .data = &rcar_rst_gen3 }, { .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen3 }, { .compatible = "renesas,r8a77980-rst", .data = &rcar_rst_gen3 }, diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 59b5e6b10272..f0b291e02b8a 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -63,6 +63,7 @@ struct rcar_sysc_ch { static void __iomem *rcar_sysc_base; static DEFINE_SPINLOCK(rcar_sysc_lock); /* SMP CPUs + I/O devices */ +static u32 rcar_sysc_extmask_offs, rcar_sysc_extmask_val; static int rcar_sysc_pwr_on_off(const struct rcar_sysc_ch *sysc_ch, bool on) { @@ -106,6 +107,14 @@ static int rcar_sysc_power(const struct rcar_sysc_ch *sysc_ch, bool on) spin_lock_irqsave(&rcar_sysc_lock, flags); /* + * Mask external power requests for CPU or 3DG domains + */ + if (rcar_sysc_extmask_val) { + iowrite32(rcar_sysc_extmask_val, + rcar_sysc_base + rcar_sysc_extmask_offs); + } + + /* * The interrupt source needs to be enabled, but masked, to prevent the * CPU from receiving it. */ @@ -148,6 +157,9 @@ static int rcar_sysc_power(const struct rcar_sysc_ch *sysc_ch, bool on) iowrite32(isr_mask, rcar_sysc_base + SYSCISCR); out: + if (rcar_sysc_extmask_val) + iowrite32(0, rcar_sysc_base + rcar_sysc_extmask_offs); + spin_unlock_irqrestore(&rcar_sysc_lock, flags); pr_debug("sysc power %s domain %d: %08x -> %d\n", on ? "on" : "off", @@ -275,6 +287,9 @@ static const struct of_device_id rcar_sysc_matches[] __initconst = { #ifdef CONFIG_SYSC_R8A774A1 { .compatible = "renesas,r8a774a1-sysc", .data = &r8a774a1_sysc_info }, #endif +#ifdef CONFIG_SYSC_R8A774B1 + { .compatible = "renesas,r8a774b1-sysc", .data = &r8a774b1_sysc_info }, +#endif #ifdef CONFIG_SYSC_R8A774C0 { .compatible = "renesas,r8a774c0-sysc", .data = &r8a774c0_sysc_info }, #endif @@ -298,8 +313,11 @@ static const struct of_device_id rcar_sysc_matches[] __initconst = { #ifdef CONFIG_SYSC_R8A7795 { .compatible = "renesas,r8a7795-sysc", .data = &r8a7795_sysc_info }, #endif -#ifdef CONFIG_SYSC_R8A7796 - { .compatible = "renesas,r8a7796-sysc", .data = &r8a7796_sysc_info }, +#ifdef CONFIG_SYSC_R8A77960 + { .compatible = "renesas,r8a7796-sysc", .data = &r8a77960_sysc_info }, +#endif +#ifdef CONFIG_SYSC_R8A77961 + { .compatible = "renesas,r8a77961-sysc", .data = &r8a77961_sysc_info }, #endif #ifdef CONFIG_SYSC_R8A77965 { .compatible = "renesas,r8a77965-sysc", .data = &r8a77965_sysc_info }, @@ -360,6 +378,10 @@ static int __init rcar_sysc_pd_init(void) rcar_sysc_base = base; + /* Optional External Request Mask Register */ + rcar_sysc_extmask_offs = info->extmask_offs; + rcar_sysc_extmask_val = info->extmask_val; + domains = kzalloc(sizeof(*domains), GFP_KERNEL); if (!domains) { error = -ENOMEM; diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h index 485520a5b295..8d074489fba9 100644 --- a/drivers/soc/renesas/rcar-sysc.h +++ b/drivers/soc/renesas/rcar-sysc.h @@ -44,20 +44,25 @@ struct rcar_sysc_info { int (*init)(void); /* Optional */ const struct rcar_sysc_area *areas; unsigned int num_areas; + /* Optional External Request Mask Register */ + u32 extmask_offs; /* SYSCEXTMASK register offset */ + u32 extmask_val; /* SYSCEXTMASK register mask value */ }; extern const struct rcar_sysc_info r8a7743_sysc_info; extern const struct rcar_sysc_info r8a7745_sysc_info; extern const struct rcar_sysc_info r8a77470_sysc_info; extern const struct rcar_sysc_info r8a774a1_sysc_info; +extern const struct rcar_sysc_info r8a774b1_sysc_info; extern const struct rcar_sysc_info r8a774c0_sysc_info; extern const struct rcar_sysc_info r8a7779_sysc_info; extern const struct rcar_sysc_info r8a7790_sysc_info; extern const struct rcar_sysc_info r8a7791_sysc_info; extern const struct rcar_sysc_info r8a7792_sysc_info; extern const struct rcar_sysc_info r8a7794_sysc_info; -extern const struct rcar_sysc_info r8a7795_sysc_info; -extern const struct rcar_sysc_info r8a7796_sysc_info; +extern struct rcar_sysc_info r8a7795_sysc_info; +extern const struct rcar_sysc_info r8a77960_sysc_info; +extern const struct rcar_sysc_info r8a77961_sysc_info; extern const struct rcar_sysc_info r8a77965_sysc_info; extern const struct rcar_sysc_info r8a77970_sysc_info; extern const struct rcar_sysc_info r8a77980_sysc_info; diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c index 3299cf5365f3..850f5733dc88 100644 --- a/drivers/soc/renesas/renesas-soc.c +++ b/drivers/soc/renesas/renesas-soc.c @@ -116,6 +116,11 @@ static const struct renesas_soc soc_rz_g2m __initconst __maybe_unused = { .id = 0x52, }; +static const struct renesas_soc soc_rz_g2n __initconst __maybe_unused = { + .family = &fam_rzg2, + .id = 0x55, +}; + static const struct renesas_soc soc_rz_g2e __initconst __maybe_unused = { .family = &fam_rzg2, .id = 0x57, @@ -227,6 +232,9 @@ static const struct of_device_id renesas_socs[] __initconst = { #ifdef CONFIG_ARCH_R8A774A1 { .compatible = "renesas,r8a774a1", .data = &soc_rz_g2m }, #endif +#ifdef CONFIG_ARCH_R8A774B1 + { .compatible = "renesas,r8a774b1", .data = &soc_rz_g2n }, +#endif #ifdef CONFIG_ARCH_R8A774C0 { .compatible = "renesas,r8a774c0", .data = &soc_rz_g2e }, #endif @@ -254,9 +262,12 @@ static const struct of_device_id renesas_socs[] __initconst = { #ifdef CONFIG_ARCH_R8A7795 { .compatible = "renesas,r8a7795", .data = &soc_rcar_h3 }, #endif -#ifdef CONFIG_ARCH_R8A7796 +#ifdef CONFIG_ARCH_R8A77960 { .compatible = "renesas,r8a7796", .data = &soc_rcar_m3_w }, #endif +#ifdef CONFIG_ARCH_R8A77961 + { .compatible = "renesas,r8a77961", .data = &soc_rcar_m3_w }, +#endif #ifdef CONFIG_ARCH_R8A77965 { .compatible = "renesas,r8a77965", .data = &soc_rcar_m3_n }, #endif @@ -326,7 +337,7 @@ static int __init renesas_soc_init(void) if (np) { chipid = of_iomap(np, 0); of_node_put(np); - } else if (soc->id) { + } else if (soc->id && family->reg) { chipid = ioremap(family->reg, 4); } if (chipid) { diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig index 33ad0de2de3c..27fc59bbb520 100644 --- a/drivers/soc/samsung/Kconfig +++ b/drivers/soc/samsung/Kconfig @@ -7,6 +7,16 @@ menuconfig SOC_SAMSUNG if SOC_SAMSUNG +config EXYNOS_ASV + bool "Exynos Adaptive Supply Voltage support" if COMPILE_TEST + depends on (ARCH_EXYNOS && EXYNOS_CHIPID) || COMPILE_TEST + select EXYNOS_ASV_ARM if ARM && ARCH_EXYNOS + +# There is no need to enable these drivers for ARMv8 +config EXYNOS_ASV_ARM + bool "Exynos ASV ARMv7-specific driver extensions" if COMPILE_TEST + depends on EXYNOS_ASV + config EXYNOS_CHIPID bool "Exynos Chipid controller driver" if COMPILE_TEST depends on ARCH_EXYNOS || COMPILE_TEST diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile index 3b6a8797416c..edd1d6ea064d 100644 --- a/drivers/soc/samsung/Makefile +++ b/drivers/soc/samsung/Makefile @@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_EXYNOS_ASV) += exynos-asv.o +obj-$(CONFIG_EXYNOS_ASV_ARM) += exynos5422-asv.o + obj-$(CONFIG_EXYNOS_CHIPID) += exynos-chipid.o obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o diff --git a/drivers/soc/samsung/exynos-asv.c b/drivers/soc/samsung/exynos-asv.c new file mode 100644 index 000000000000..30bb7b7cc769 --- /dev/null +++ b/drivers/soc/samsung/exynos-asv.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> + * + * Samsung Exynos SoC Adaptive Supply Voltage support + */ + +#include <linux/cpu.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/regmap.h> +#include <linux/soc/samsung/exynos-chipid.h> + +#include "exynos-asv.h" +#include "exynos5422-asv.h" + +#define MHZ 1000000U + +static int exynos_asv_update_cpu_opps(struct exynos_asv *asv, + struct device *cpu) +{ + struct exynos_asv_subsys *subsys = NULL; + struct dev_pm_opp *opp; + unsigned int opp_freq; + int i; + + for (i = 0; i < ARRAY_SIZE(asv->subsys); i++) { + if (of_device_is_compatible(cpu->of_node, + asv->subsys[i].cpu_dt_compat)) { + subsys = &asv->subsys[i]; + break; + } + } + if (!subsys) + return -EINVAL; + + for (i = 0; i < subsys->table.num_rows; i++) { + unsigned int new_volt, volt; + int ret; + + opp_freq = exynos_asv_opp_get_frequency(subsys, i); + + opp = dev_pm_opp_find_freq_exact(cpu, opp_freq * MHZ, true); + if (IS_ERR(opp)) { + dev_info(asv->dev, "cpu%d opp%d, freq: %u missing\n", + cpu->id, i, opp_freq); + + continue; + } + + volt = dev_pm_opp_get_voltage(opp); + new_volt = asv->opp_get_voltage(subsys, i, volt); + dev_pm_opp_put(opp); + + if (new_volt == volt) + continue; + + ret = dev_pm_opp_adjust_voltage(cpu, opp_freq * MHZ, + new_volt, new_volt, new_volt); + if (ret < 0) + dev_err(asv->dev, + "Failed to adjust OPP %u Hz/%u uV for cpu%d\n", + opp_freq, new_volt, cpu->id); + else + dev_dbg(asv->dev, + "Adjusted OPP %u Hz/%u -> %u uV, cpu%d\n", + opp_freq, volt, new_volt, cpu->id); + } + + return 0; +} + +static int exynos_asv_update_opps(struct exynos_asv *asv) +{ + struct opp_table *last_opp_table = NULL; + struct device *cpu; + int ret, cpuid; + + for_each_possible_cpu(cpuid) { + struct opp_table *opp_table; + + cpu = get_cpu_device(cpuid); + if (!cpu) + continue; + + opp_table = dev_pm_opp_get_opp_table(cpu); + if (IS_ERR_OR_NULL(opp_table)) + continue; + + if (!last_opp_table || opp_table != last_opp_table) { + last_opp_table = opp_table; + + ret = exynos_asv_update_cpu_opps(asv, cpu); + if (ret < 0) + dev_err(asv->dev, "Couldn't udate OPPs for cpu%d\n", + cpuid); + } + + dev_pm_opp_put_opp_table(opp_table); + } + + return 0; +} + +static int exynos_asv_probe(struct platform_device *pdev) +{ + int (*probe_func)(struct exynos_asv *asv); + struct exynos_asv *asv; + struct device *cpu_dev; + u32 product_id = 0; + int ret, i; + + cpu_dev = get_cpu_device(0); + ret = dev_pm_opp_get_opp_count(cpu_dev); + if (ret < 0) + return -EPROBE_DEFER; + + asv = devm_kzalloc(&pdev->dev, sizeof(*asv), GFP_KERNEL); + if (!asv) + return -ENOMEM; + + asv->chipid_regmap = device_node_to_regmap(pdev->dev.of_node); + if (IS_ERR(asv->chipid_regmap)) { + dev_err(&pdev->dev, "Could not find syscon regmap\n"); + return PTR_ERR(asv->chipid_regmap); + } + + regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_PRO_ID, &product_id); + + switch (product_id & EXYNOS_MASK) { + case 0xE5422000: + probe_func = exynos5422_asv_init; + break; + default: + return -ENODEV; + } + + ret = of_property_read_u32(pdev->dev.of_node, "samsung,asv-bin", + &asv->of_bin); + if (ret < 0) + asv->of_bin = -EINVAL; + + asv->dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, asv); + + for (i = 0; i < ARRAY_SIZE(asv->subsys); i++) + asv->subsys[i].asv = asv; + + ret = probe_func(asv); + if (ret < 0) + return ret; + + return exynos_asv_update_opps(asv); +} + +static const struct of_device_id exynos_asv_of_device_ids[] = { + { .compatible = "samsung,exynos4210-chipid" }, + {} +}; + +static struct platform_driver exynos_asv_driver = { + .driver = { + .name = "exynos-asv", + .of_match_table = exynos_asv_of_device_ids, + }, + .probe = exynos_asv_probe, +}; +module_platform_driver(exynos_asv_driver); diff --git a/drivers/soc/samsung/exynos-asv.h b/drivers/soc/samsung/exynos-asv.h new file mode 100644 index 000000000000..3fd1f2acd999 --- /dev/null +++ b/drivers/soc/samsung/exynos-asv.h @@ -0,0 +1,71 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2019 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> + * + * Samsung Exynos SoC Adaptive Supply Voltage support + */ +#ifndef __LINUX_SOC_EXYNOS_ASV_H +#define __LINUX_SOC_EXYNOS_ASV_H + +struct regmap; + +/* HPM, IDS values to select target group */ +struct asv_limit_entry { + unsigned int hpm; + unsigned int ids; +}; + +struct exynos_asv_table { + unsigned int num_rows; + unsigned int num_cols; + u32 *buf; +}; + +struct exynos_asv_subsys { + struct exynos_asv *asv; + const char *cpu_dt_compat; + int id; + struct exynos_asv_table table; + + unsigned int base_volt; + unsigned int offset_volt_h; + unsigned int offset_volt_l; +}; + +struct exynos_asv { + struct device *dev; + struct regmap *chipid_regmap; + struct exynos_asv_subsys subsys[2]; + + int (*opp_get_voltage)(const struct exynos_asv_subsys *subs, + int level, unsigned int voltage); + unsigned int group; + unsigned int table; + + /* True if SG fields from PKG_ID register should be used */ + bool use_sg; + /* ASV bin read from DT */ + int of_bin; +}; + +static inline u32 __asv_get_table_entry(const struct exynos_asv_table *table, + unsigned int row, unsigned int col) +{ + return table->buf[row * (table->num_cols) + col]; +} + +static inline u32 exynos_asv_opp_get_voltage(const struct exynos_asv_subsys *subsys, + unsigned int level, unsigned int group) +{ + return __asv_get_table_entry(&subsys->table, level, group + 1); +} + +static inline u32 exynos_asv_opp_get_frequency(const struct exynos_asv_subsys *subsys, + unsigned int level) +{ + return __asv_get_table_entry(&subsys->table, level, 0); +} + +#endif /* __LINUX_SOC_EXYNOS_ASV_H */ diff --git a/drivers/soc/samsung/exynos-chipid.c b/drivers/soc/samsung/exynos-chipid.c index c55a47cfe617..b89c26a71c6e 100644 --- a/drivers/soc/samsung/exynos-chipid.c +++ b/drivers/soc/samsung/exynos-chipid.c @@ -45,17 +45,25 @@ static const char * __init product_id_to_soc_id(unsigned int product_id) return NULL; } -int __init exynos_chipid_early_init(void) +static int __init exynos_chipid_early_init(void) { struct soc_device_attribute *soc_dev_attr; struct soc_device *soc_dev; struct device_node *root; + struct device_node *syscon; struct regmap *regmap; u32 product_id; u32 revision; int ret; - regmap = syscon_regmap_lookup_by_compatible("samsung,exynos4210-chipid"); + syscon = of_find_compatible_node(NULL, NULL, + "samsung,exynos4210-chipid"); + if (!syscon) + return ENODEV; + + regmap = device_node_to_regmap(syscon); + of_node_put(syscon); + if (IS_ERR(regmap)) return PTR_ERR(regmap); diff --git a/drivers/soc/samsung/exynos5422-asv.c b/drivers/soc/samsung/exynos5422-asv.c new file mode 100644 index 000000000000..01bb3050d678 --- /dev/null +++ b/drivers/soc/samsung/exynos5422-asv.c @@ -0,0 +1,505 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Samsung Exynos 5422 SoC Adaptive Supply Voltage support + */ + +#include <linux/bitrev.h> +#include <linux/errno.h> +#include <linux/regmap.h> +#include <linux/soc/samsung/exynos-chipid.h> +#include <linux/slab.h> + +#include "exynos-asv.h" +#include "exynos5422-asv.h" + +#define ASV_GROUPS_NUM 14 +#define ASV_ARM_DVFS_NUM 20 +#define ASV_ARM_BIN2_DVFS_NUM 17 +#define ASV_KFC_DVFS_NUM 14 +#define ASV_KFC_BIN2_DVFS_NUM 12 + +/* + * This array is a set of 4 ASV data tables, first column of each ASV table + * contains frequency value in MHz and subsequent columns contain the CPU + * cluster's supply voltage values in uV. + * In order to create a set of OPPs for specific SoC revision one of the voltage + * columns (1...14) from one of the tables (0...3) is selected during + * initialization. There are separate ASV tables for the big (ARM) and little + * (KFC) CPU cluster. Only OPPs which are already defined in devicetree + * will be updated. + */ + +static const u32 asv_arm_table[][ASV_ARM_DVFS_NUM][ASV_GROUPS_NUM + 1] = { +{ + /* ARM 0, 1 */ + { 2100, 1362500, 1362500, 1350000, 1337500, 1325000, 1312500, 1300000, + 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000 }, + { 2000, 1312500, 1312500, 1300000, 1287500, 1275000, 1262500, 1250000, + 1237500, 1225000, 1237500, 1225000, 1212500, 1200000, 1187500 }, + { 1900, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500, 1175000, + 1162500, 1150000, 1162500, 1150000, 1137500, 1125000, 1112500 }, + { 1800, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500, 1125000, + 1112500, 1100000, 1112500, 1100000, 1087500, 1075000, 1062500 }, + { 1700, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500, + 1075000, 1062500, 1075000, 1062500, 1050000, 1037500, 1025000 }, + { 1600, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1050000, + 1037500, 1025000, 1037500, 1025000, 1012500, 1000000, 987500 }, + { 1500, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, + 1000000, 987500, 1000000, 987500, 975000, 962500, 950000 }, + { 1400, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, + 975000, 962500, 975000, 962500, 950000, 937500, 925000 }, + { 1300, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000, + 962500, 950000, 962500, 950000, 937500, 925000, 912500 }, + { 1200, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000, + 937500, 925000, 937500, 925000, 912500, 900000, 900000 }, + { 1100, 1000000, 987500, 975000, 962500, 950000, 937500, 925000, + 912500, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 1000, 975000, 962500, 950000, 937500, 925000, 912500, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 900, 950000, 937500, 925000, 912500, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 800, 925000, 912500, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 700, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 600, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +}, { + /* ARM 2 */ + { 2100, 1362500, 1362500, 1350000, 1337500, 1325000, 1312500, 1300000, + 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000 }, + { 2000, 1312500, 1312500, 1312500, 1300000, 1275000, 1262500, 1250000, + 1237500, 1225000, 1237500, 1225000, 1212500, 1200000, 1187500 }, + { 1900, 1262500, 1250000, 1250000, 1237500, 1212500, 1200000, 1187500, + 1175000, 1162500, 1175000, 1162500, 1150000, 1137500, 1125000 }, + { 1800, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500, + 1125000, 1112500, 1125000, 1112500, 1100000, 1087500, 1075000 }, + { 1700, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, + 1087500, 1075000, 1087500, 1075000, 1062500, 1050000, 1037500 }, + { 1600, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, + 1050000, 1037500, 1050000, 1037500, 1025000, 1012500, 1000000 }, + { 1500, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, + 1012500, 1000000, 1012500, 1000000, 987500, 975000, 962500 }, + { 1400, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, + 987500, 975000, 987500, 975000, 962500, 950000, 937500 }, + { 1300, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000, + 962500, 950000, 962500, 950000, 937500, 925000, 912500 }, + { 1200, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000, + 937500, 925000, 937500, 925000, 912500, 900000, 900000 }, + { 1100, 1000000, 987500, 975000, 962500, 950000, 937500, 925000, + 912500, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 1000, 975000, 962500, 950000, 937500, 925000, 912500, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 900, 950000, 937500, 925000, 912500, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 800, 925000, 912500, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 700, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 600, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +}, { + /* ARM 3 */ + { 2100, 1362500, 1362500, 1350000, 1337500, 1325000, 1312500, 1300000, + 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000 }, + { 2000, 1312500, 1312500, 1300000, 1287500, 1275000, 1262500, 1250000, + 1237500, 1225000, 1237500, 1225000, 1212500, 1200000, 1187500 }, + { 1900, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500, + 1175000, 1162500, 1175000, 1162500, 1150000, 1137500, 1125000 }, + { 1800, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500, + 1125000, 1112500, 1125000, 1112500, 1100000, 1087500, 1075000 }, + { 1700, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, + 1087500, 1075000, 1087500, 1075000, 1062500, 1050000, 1037500 }, + { 1600, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, + 1050000, 1037500, 1050000, 1037500, 1025000, 1012500, 1000000 }, + { 1500, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, + 1012500, 1000000, 1012500, 1000000, 987500, 975000, 962500 }, + { 1400, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, + 987500, 975000, 987500, 975000, 962500, 950000, 937500 }, + { 1300, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000, + 962500, 950000, 962500, 950000, 937500, 925000, 912500 }, + { 1200, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000, + 937500, 925000, 937500, 925000, 912500, 900000, 900000 }, + { 1100, 1000000, 987500, 975000, 962500, 950000, 937500, 925000, + 912500, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 1000, 975000, 962500, 950000, 937500, 925000, 912500, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 900, 950000, 937500, 925000, 912500, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 800, 925000, 912500, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 700, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 600, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +}, { + /* ARM bin 2 */ + { 1800, 1237500, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500, + 1150000, 1137500, 1150000, 1137500, 1125000, 1112500, 1100000 }, + { 1700, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500, 1125000, + 1112500, 1100000, 1112500, 1100000, 1087500, 1075000, 1062500 }, + { 1600, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500, + 1075000, 1062500, 1075000, 1062500, 1050000, 1037500, 1025000 }, + { 1500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1050000, + 1037500, 1025000, 1037500, 1025000, 1012500, 1000000, 987500 }, + { 1400, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, + 1012500, 1000000, 1012500, 1000000, 987500, 975000, 962500 }, + { 1300, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, + 1000000, 987500, 1000000, 987500, 975000, 962500, 950000 }, + { 1200, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, + 975000, 962500, 975000, 962500, 950000, 937500, 925000 }, + { 1100, 1037500, 1025000, 1012500, 1000000, 987500, 975000, 962500, + 950000, 937500, 950000, 937500, 925000, 912500, 900000 }, + { 1000, 1012500, 1000000, 987500, 975000, 962500, 950000, 937500, + 925000, 912500, 925000, 912500, 900000, 900000, 900000 }, + { 900, 987500, 975000, 962500, 950000, 937500, 925000, 912500, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 800, 962500, 950000, 937500, 925000, 912500, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 700, 937500, 925000, 912500, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 600, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +} +}; + +static const u32 asv_kfc_table[][ASV_KFC_DVFS_NUM][ASV_GROUPS_NUM + 1] = { +{ + /* KFC 0, 1 */ + { 1500000, 1300000, 1300000, 1300000, 1287500, 1287500, 1287500, 1275000, + 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500 }, + { 1400000, 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, + 1187500, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500 }, + { 1300000, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000, + 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500 }, + { 1200000, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, + 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500 }, + { 1100000, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, + 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000 }, + { 1000000, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, + 1012500, 1000000, 987500, 975000, 962500, 950000, 937500 }, + { 900000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, + 975000, 962500, 950000, 937500, 925000, 912500, 900000 }, + { 800000, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000, + 937500, 925000, 912500, 900000, 900000, 900000, 900000 }, + { 700000, 987500, 975000, 962500, 950000, 937500, 925000, 912500, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 600000, 950000, 937500, 925000, 912500, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500000, 912500, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400000, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300000, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200000, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +}, { + /* KFC 2 */ + { 1500, 1300000, 1300000, 1300000, 1287500, 1287500, 1287500, 1275000, + 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500 }, + { 1400, 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, + 1187500, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500 }, + { 1300, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000, + 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500 }, + { 1200, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, + 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500 }, + { 1100, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, + 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000 }, + { 1000, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, + 1012500, 1000000, 987500, 975000, 962500, 950000, 937500 }, + { 900, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, + 975000, 962500, 950000, 937500, 925000, 912500, 900000 }, + { 800, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000, + 937500, 925000, 912500, 900000, 900000, 900000, 900000 }, + { 700, 987500, 975000, 962500, 950000, 937500, 925000, 912500, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 600, 950000, 937500, 925000, 912500, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500, 912500, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +}, { + /* KFC 3 */ + { 1500, 1300000, 1300000, 1300000, 1287500, 1287500, 1287500, 1275000, + 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500 }, + { 1400, 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, + 1187500, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500 }, + { 1300, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000, + 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500 }, + { 1200, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, + 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500 }, + { 1100, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, + 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000 }, + { 1000, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, + 1012500, 1000000, 987500, 975000, 962500, 950000, 937500 }, + { 900, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, + 975000, 962500, 950000, 937500, 925000, 912500, 900000 }, + { 800, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000, + 937500, 925000, 912500, 900000, 900000, 900000, 900000 }, + { 700, 987500, 975000, 962500, 950000, 937500, 925000, 912500, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 600, 950000, 937500, 925000, 912500, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500, 912500, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +}, { + /* KFC bin 2 */ + { 1300, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500, 1175000, + 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500 }, + { 1200, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500, 1125000, + 1112500, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500 }, + { 1100, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500, + 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000 }, + { 1000, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1050000, + 1037500, 1025000, 1012500, 1000000, 987500, 975000, 962500 }, + { 900, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, + 1000000, 987500, 975000, 962500, 950000, 937500, 925000 }, + { 800, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000, + 962500, 950000, 937500, 925000, 912500, 900000, 900000 }, + { 700, 1012500, 1000000, 987500, 975000, 962500, 950000, 937500, + 925000, 912500, 900000, 900000, 900000, 900000, 900000 }, + { 600, 975000, 962500, 950000, 937500, 925000, 912500, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 500, 937500, 925000, 912500, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 400, 925000, 912500, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, + { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000, + 900000, 900000, 900000, 900000, 900000, 900000, 900000 }, +} +}; + +static const struct asv_limit_entry __asv_limits[ASV_GROUPS_NUM] = { + { 13, 55 }, + { 21, 65 }, + { 25, 69 }, + { 30, 72 }, + { 36, 74 }, + { 43, 76 }, + { 51, 78 }, + { 65, 80 }, + { 81, 82 }, + { 98, 84 }, + { 119, 87 }, + { 135, 89 }, + { 150, 92 }, + { 999, 999 }, +}; + +static int exynos5422_asv_get_group(struct exynos_asv *asv) +{ + unsigned int pkgid_reg, auxi_reg; + int hpm, ids, i; + + regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_PKG_ID, &pkgid_reg); + regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_AUX_INFO, &auxi_reg); + + if (asv->use_sg) { + u32 sga = (pkgid_reg >> EXYNOS5422_SG_A_OFFSET) & + EXYNOS5422_SG_A_MASK; + + u32 sgb = (pkgid_reg >> EXYNOS5422_SG_B_OFFSET) & + EXYNOS5422_SG_B_MASK; + + if ((pkgid_reg >> EXYNOS5422_SG_BSIGN_OFFSET) & + EXYNOS5422_SG_BSIGN_MASK) + return sga + sgb; + else + return sga - sgb; + } + + hpm = (auxi_reg >> EXYNOS5422_TMCB_OFFSET) & EXYNOS5422_TMCB_MASK; + ids = (pkgid_reg >> EXYNOS5422_IDS_OFFSET) & EXYNOS5422_IDS_MASK; + + for (i = 0; i < ASV_GROUPS_NUM; i++) { + if (ids <= __asv_limits[i].ids) + break; + if (hpm <= __asv_limits[i].hpm) + break; + } + if (i < ASV_GROUPS_NUM) + return i; + + return 0; +} + +static int __asv_offset_voltage(unsigned int index) +{ + switch (index) { + case 1: + return 12500; + case 2: + return 50000; + case 3: + return 25000; + default: + return 0; + }; +} + +static void exynos5422_asv_offset_voltage_setup(struct exynos_asv *asv) +{ + struct exynos_asv_subsys *subsys; + unsigned int reg, value; + + regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_AUX_INFO, ®); + + /* ARM offset voltage setup */ + subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_ARM]; + + subsys->base_volt = 1000000; + + value = (reg >> EXYNOS5422_ARM_UP_OFFSET) & EXYNOS5422_ARM_UP_MASK; + subsys->offset_volt_h = __asv_offset_voltage(value); + + value = (reg >> EXYNOS5422_ARM_DN_OFFSET) & EXYNOS5422_ARM_DN_MASK; + subsys->offset_volt_l = __asv_offset_voltage(value); + + /* KFC offset voltage setup */ + subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_KFC]; + + subsys->base_volt = 1000000; + + value = (reg >> EXYNOS5422_KFC_UP_OFFSET) & EXYNOS5422_KFC_UP_MASK; + subsys->offset_volt_h = __asv_offset_voltage(value); + + value = (reg >> EXYNOS5422_KFC_DN_OFFSET) & EXYNOS5422_KFC_DN_MASK; + subsys->offset_volt_l = __asv_offset_voltage(value); +} + +static int exynos5422_asv_opp_get_voltage(const struct exynos_asv_subsys *subsys, + int level, unsigned int volt) +{ + unsigned int asv_volt; + + if (level >= subsys->table.num_rows) + return volt; + + asv_volt = exynos_asv_opp_get_voltage(subsys, level, + subsys->asv->group); + + if (volt > subsys->base_volt) + asv_volt += subsys->offset_volt_h; + else + asv_volt += subsys->offset_volt_l; + + return asv_volt; +} + +static unsigned int exynos5422_asv_parse_table(unsigned int pkg_id) +{ + return (pkg_id >> EXYNOS5422_TABLE_OFFSET) & EXYNOS5422_TABLE_MASK; +} + +static bool exynos5422_asv_parse_bin2(unsigned int pkg_id) +{ + return (pkg_id >> EXYNOS5422_BIN2_OFFSET) & EXYNOS5422_BIN2_MASK; +} + +static bool exynos5422_asv_parse_sg(unsigned int pkg_id) +{ + return (pkg_id >> EXYNOS5422_USESG_OFFSET) & EXYNOS5422_USESG_MASK; +} + +int exynos5422_asv_init(struct exynos_asv *asv) +{ + struct exynos_asv_subsys *subsys; + unsigned int table_index; + unsigned int pkg_id; + bool bin2; + + regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_PKG_ID, &pkg_id); + + if (asv->of_bin == 2) { + bin2 = true; + asv->use_sg = false; + } else { + asv->use_sg = exynos5422_asv_parse_sg(pkg_id); + bin2 = exynos5422_asv_parse_bin2(pkg_id); + } + + asv->group = exynos5422_asv_get_group(asv); + asv->table = exynos5422_asv_parse_table(pkg_id); + + exynos5422_asv_offset_voltage_setup(asv); + + if (bin2) { + table_index = 3; + } else { + if (asv->table == 2 || asv->table == 3) + table_index = asv->table - 1; + else + table_index = 0; + } + + subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_ARM]; + subsys->cpu_dt_compat = "arm,cortex-a15"; + if (bin2) + subsys->table.num_rows = ASV_ARM_BIN2_DVFS_NUM; + else + subsys->table.num_rows = ASV_ARM_DVFS_NUM; + subsys->table.num_cols = ASV_GROUPS_NUM + 1; + subsys->table.buf = (u32 *)asv_arm_table[table_index]; + + subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_KFC]; + subsys->cpu_dt_compat = "arm,cortex-a7"; + if (bin2) + subsys->table.num_rows = ASV_KFC_BIN2_DVFS_NUM; + else + subsys->table.num_rows = ASV_KFC_DVFS_NUM; + subsys->table.num_cols = ASV_GROUPS_NUM + 1; + subsys->table.buf = (u32 *)asv_kfc_table[table_index]; + + asv->opp_get_voltage = exynos5422_asv_opp_get_voltage; + + return 0; +} diff --git a/drivers/soc/samsung/exynos5422-asv.h b/drivers/soc/samsung/exynos5422-asv.h new file mode 100644 index 000000000000..95a5fb1a7508 --- /dev/null +++ b/drivers/soc/samsung/exynos5422-asv.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2019 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Samsung Exynos 5422 SoC Adaptive Supply Voltage support + */ + +#ifndef __LINUX_SOC_EXYNOS5422_ASV_H +#define __LINUX_SOC_EXYNOS5422_ASV_H + +#include <linux/errno.h> + +enum { + EXYNOS_ASV_SUBSYS_ID_ARM, + EXYNOS_ASV_SUBSYS_ID_KFC, + EXYNOS_ASV_SUBSYS_ID_MAX +}; + +struct exynos_asv; + +#ifdef CONFIG_EXYNOS_ASV_ARM +int exynos5422_asv_init(struct exynos_asv *asv); +#else +static inline int exynos5422_asv_init(struct exynos_asv *asv) +{ + return -ENOTSUPP; +} +#endif + +#endif /* __LINUX_SOC_EXYNOS5422_ASV_H */ diff --git a/drivers/soc/tegra/flowctrl.c b/drivers/soc/tegra/flowctrl.c index b6bdeef33db1..eb96a3086d6d 100644 --- a/drivers/soc/tegra/flowctrl.c +++ b/drivers/soc/tegra/flowctrl.c @@ -91,8 +91,23 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid) reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfi bitmap */ reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP; - /* pwr gating on wfi */ - reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid; + + if (tegra_get_chip_id() == TEGRA30) { + /* + * The wfi doesn't work well on Tegra30 because + * CPU hangs under some odd circumstances after + * power-gating (like memory running off PLLP), + * hence use wfe that is working perfectly fine. + * Note that Tegra30 TRM doc clearly stands that + * wfi should be used for the "Cluster Switching", + * while wfe for the power-gating, just like it + * is done on Tegra20. + */ + reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid; + } else { + /* pwr gating on wfi */ + reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid; + } break; } reg |= FLOW_CTRL_CSR_INTR_FLAG; /* clear intr flag */ diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile index b3868d392d4f..788b5cd1e180 100644 --- a/drivers/soc/ti/Makefile +++ b/drivers/soc/ti/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS) += knav_qmss.o knav_qmss-y := knav_qmss_queue.o knav_qmss_acc.o obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA) += knav_dma.o obj-$(CONFIG_AMX3_PM) += pm33xx.o +obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_prm.o obj-$(CONFIG_WKUP_M3_IPC) += wkup_m3_ipc.o obj-$(CONFIG_TI_SCI_PM_DOMAINS) += ti_sci_pm_domains.o obj-$(CONFIG_TI_SCI_INTA_MSI_DOMAIN) += ti_sci_inta_msi.o diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c new file mode 100644 index 000000000000..96c6f777519c --- /dev/null +++ b/drivers/soc/ti/omap_prm.c @@ -0,0 +1,391 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * OMAP2+ PRM driver + * + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + * Tero Kristo <t-kristo@ti.com> + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <linux/delay.h> + +#include <linux/platform_data/ti-prm.h> + +struct omap_rst_map { + s8 rst; + s8 st; +}; + +struct omap_prm_data { + u32 base; + const char *name; + const char *clkdm_name; + u16 rstctrl; + u16 rstst; + const struct omap_rst_map *rstmap; + u8 flags; +}; + +struct omap_prm { + const struct omap_prm_data *data; + void __iomem *base; +}; + +struct omap_reset_data { + struct reset_controller_dev rcdev; + struct omap_prm *prm; + u32 mask; + spinlock_t lock; + struct clockdomain *clkdm; + struct device *dev; +}; + +#define to_omap_reset_data(p) container_of((p), struct omap_reset_data, rcdev) + +#define OMAP_MAX_RESETS 8 +#define OMAP_RESET_MAX_WAIT 10000 + +#define OMAP_PRM_HAS_RSTCTRL BIT(0) +#define OMAP_PRM_HAS_RSTST BIT(1) +#define OMAP_PRM_HAS_NO_CLKDM BIT(2) + +#define OMAP_PRM_HAS_RESETS (OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_RSTST) + +static const struct omap_rst_map rst_map_0[] = { + { .rst = 0, .st = 0 }, + { .rst = -1 }, +}; + +static const struct omap_rst_map rst_map_01[] = { + { .rst = 0, .st = 0 }, + { .rst = 1, .st = 1 }, + { .rst = -1 }, +}; + +static const struct omap_rst_map rst_map_012[] = { + { .rst = 0, .st = 0 }, + { .rst = 1, .st = 1 }, + { .rst = 2, .st = 2 }, + { .rst = -1 }, +}; + +static const struct omap_prm_data omap4_prm_data[] = { + { .name = "tesla", .base = 0x4a306400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { .name = "core", .base = 0x4a306700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ducati", .rstmap = rst_map_012 }, + { .name = "ivahd", .base = 0x4a306f00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 }, + { .name = "device", .base = 0x4a307b00, .rstctrl = 0x0, .rstst = 0x4, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM }, + { }, +}; + +static const struct omap_prm_data omap5_prm_data[] = { + { .name = "dsp", .base = 0x4ae06400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { .name = "core", .base = 0x4ae06700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ipu", .rstmap = rst_map_012 }, + { .name = "iva", .base = 0x4ae07200, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 }, + { .name = "device", .base = 0x4ae07c00, .rstctrl = 0x0, .rstst = 0x4, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM }, + { }, +}; + +static const struct omap_prm_data dra7_prm_data[] = { + { .name = "dsp1", .base = 0x4ae06400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { .name = "ipu", .base = 0x4ae06500, .rstctrl = 0x10, .rstst = 0x14, .clkdm_name = "ipu1", .rstmap = rst_map_012 }, + { .name = "core", .base = 0x4ae06700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ipu2", .rstmap = rst_map_012 }, + { .name = "iva", .base = 0x4ae06f00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 }, + { .name = "dsp2", .base = 0x4ae07b00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { .name = "eve1", .base = 0x4ae07b40, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { .name = "eve2", .base = 0x4ae07b80, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { .name = "eve3", .base = 0x4ae07bc0, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { .name = "eve4", .base = 0x4ae07c00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 }, + { }, +}; + +static const struct omap_rst_map am3_per_rst_map[] = { + { .rst = 1 }, + { .rst = -1 }, +}; + +static const struct omap_rst_map am3_wkup_rst_map[] = { + { .rst = 3, .st = 5 }, + { .rst = -1 }, +}; + +static const struct omap_prm_data am3_prm_data[] = { + { .name = "per", .base = 0x44e00c00, .rstctrl = 0x0, .rstmap = am3_per_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL, .clkdm_name = "pruss_ocp" }, + { .name = "wkup", .base = 0x44e00d00, .rstctrl = 0x0, .rstst = 0xc, .rstmap = am3_wkup_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM }, + { .name = "device", .base = 0x44e00f00, .rstctrl = 0x0, .rstst = 0x8, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM }, + { .name = "gfx", .base = 0x44e01100, .rstctrl = 0x4, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3" }, + { }, +}; + +static const struct omap_rst_map am4_per_rst_map[] = { + { .rst = 1, .st = 0 }, + { .rst = -1 }, +}; + +static const struct omap_rst_map am4_device_rst_map[] = { + { .rst = 0, .st = 1 }, + { .rst = 1, .st = 0 }, + { .rst = -1 }, +}; + +static const struct omap_prm_data am4_prm_data[] = { + { .name = "gfx", .base = 0x44df0400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3" }, + { .name = "per", .base = 0x44df0800, .rstctrl = 0x10, .rstst = 0x14, .rstmap = am4_per_rst_map, .clkdm_name = "pruss_ocp" }, + { .name = "wkup", .base = 0x44df2000, .rstctrl = 0x10, .rstst = 0x14, .rstmap = am3_wkup_rst_map, .flags = OMAP_PRM_HAS_NO_CLKDM }, + { .name = "device", .base = 0x44df4000, .rstctrl = 0x0, .rstst = 0x4, .rstmap = am4_device_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM }, + { }, +}; + +static const struct of_device_id omap_prm_id_table[] = { + { .compatible = "ti,omap4-prm-inst", .data = omap4_prm_data }, + { .compatible = "ti,omap5-prm-inst", .data = omap5_prm_data }, + { .compatible = "ti,dra7-prm-inst", .data = dra7_prm_data }, + { .compatible = "ti,am3-prm-inst", .data = am3_prm_data }, + { .compatible = "ti,am4-prm-inst", .data = am4_prm_data }, + { }, +}; + +static bool _is_valid_reset(struct omap_reset_data *reset, unsigned long id) +{ + if (reset->mask & BIT(id)) + return true; + + return false; +} + +static int omap_reset_get_st_bit(struct omap_reset_data *reset, + unsigned long id) +{ + const struct omap_rst_map *map = reset->prm->data->rstmap; + + while (map->rst >= 0) { + if (map->rst == id) + return map->st; + + map++; + } + + return id; +} + +static int omap_reset_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct omap_reset_data *reset = to_omap_reset_data(rcdev); + u32 v; + int st_bit = omap_reset_get_st_bit(reset, id); + bool has_rstst = reset->prm->data->rstst || + (reset->prm->data->flags & OMAP_PRM_HAS_RSTST); + + /* Check if we have rstst */ + if (!has_rstst) + return -ENOTSUPP; + + /* Check if hw reset line is asserted */ + v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl); + if (v & BIT(id)) + return 1; + + /* + * Check reset status, high value means reset sequence has been + * completed successfully so we can return 0 here (reset deasserted) + */ + v = readl_relaxed(reset->prm->base + reset->prm->data->rstst); + v >>= st_bit; + v &= 1; + + return !v; +} + +static int omap_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct omap_reset_data *reset = to_omap_reset_data(rcdev); + u32 v; + unsigned long flags; + + /* assert the reset control line */ + spin_lock_irqsave(&reset->lock, flags); + v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl); + v |= 1 << id; + writel_relaxed(v, reset->prm->base + reset->prm->data->rstctrl); + spin_unlock_irqrestore(&reset->lock, flags); + + return 0; +} + +static int omap_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct omap_reset_data *reset = to_omap_reset_data(rcdev); + u32 v; + int st_bit; + bool has_rstst; + unsigned long flags; + struct ti_prm_platform_data *pdata = dev_get_platdata(reset->dev); + int ret = 0; + + has_rstst = reset->prm->data->rstst || + (reset->prm->data->flags & OMAP_PRM_HAS_RSTST); + + if (has_rstst) { + st_bit = omap_reset_get_st_bit(reset, id); + + /* Clear the reset status by writing 1 to the status bit */ + v = 1 << st_bit; + writel_relaxed(v, reset->prm->base + reset->prm->data->rstst); + } + + if (reset->clkdm) + pdata->clkdm_deny_idle(reset->clkdm); + + /* de-assert the reset control line */ + spin_lock_irqsave(&reset->lock, flags); + v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl); + v &= ~(1 << id); + writel_relaxed(v, reset->prm->base + reset->prm->data->rstctrl); + spin_unlock_irqrestore(&reset->lock, flags); + + if (!has_rstst) + goto exit; + + /* wait for the status to be set */ + ret = readl_relaxed_poll_timeout(reset->prm->base + + reset->prm->data->rstst, + v, v & BIT(st_bit), 1, + OMAP_RESET_MAX_WAIT); + if (ret) + pr_err("%s: timedout waiting for %s:%lu\n", __func__, + reset->prm->data->name, id); + +exit: + if (reset->clkdm) + pdata->clkdm_allow_idle(reset->clkdm); + + return ret; +} + +static const struct reset_control_ops omap_reset_ops = { + .assert = omap_reset_assert, + .deassert = omap_reset_deassert, + .status = omap_reset_status, +}; + +static int omap_prm_reset_xlate(struct reset_controller_dev *rcdev, + const struct of_phandle_args *reset_spec) +{ + struct omap_reset_data *reset = to_omap_reset_data(rcdev); + + if (!_is_valid_reset(reset, reset_spec->args[0])) + return -EINVAL; + + return reset_spec->args[0]; +} + +static int omap_prm_reset_init(struct platform_device *pdev, + struct omap_prm *prm) +{ + struct omap_reset_data *reset; + const struct omap_rst_map *map; + struct ti_prm_platform_data *pdata = dev_get_platdata(&pdev->dev); + char buf[32]; + + /* + * Check if we have controllable resets. If either rstctrl is non-zero + * or OMAP_PRM_HAS_RSTCTRL flag is set, we have reset control register + * for the domain. + */ + if (!prm->data->rstctrl && !(prm->data->flags & OMAP_PRM_HAS_RSTCTRL)) + return 0; + + /* Check if we have the pdata callbacks in place */ + if (!pdata || !pdata->clkdm_lookup || !pdata->clkdm_deny_idle || + !pdata->clkdm_allow_idle) + return -EINVAL; + + map = prm->data->rstmap; + if (!map) + return -EINVAL; + + reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL); + if (!reset) + return -ENOMEM; + + reset->rcdev.owner = THIS_MODULE; + reset->rcdev.ops = &omap_reset_ops; + reset->rcdev.of_node = pdev->dev.of_node; + reset->rcdev.nr_resets = OMAP_MAX_RESETS; + reset->rcdev.of_xlate = omap_prm_reset_xlate; + reset->rcdev.of_reset_n_cells = 1; + reset->dev = &pdev->dev; + spin_lock_init(&reset->lock); + + reset->prm = prm; + + sprintf(buf, "%s_clkdm", prm->data->clkdm_name ? prm->data->clkdm_name : + prm->data->name); + + if (!(prm->data->flags & OMAP_PRM_HAS_NO_CLKDM)) { + reset->clkdm = pdata->clkdm_lookup(buf); + if (!reset->clkdm) + return -EINVAL; + } + + while (map->rst >= 0) { + reset->mask |= BIT(map->rst); + map++; + } + + return devm_reset_controller_register(&pdev->dev, &reset->rcdev); +} + +static int omap_prm_probe(struct platform_device *pdev) +{ + struct resource *res; + const struct omap_prm_data *data; + struct omap_prm *prm; + const struct of_device_id *match; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + match = of_match_device(omap_prm_id_table, &pdev->dev); + if (!match) + return -ENOTSUPP; + + prm = devm_kzalloc(&pdev->dev, sizeof(*prm), GFP_KERNEL); + if (!prm) + return -ENOMEM; + + data = match->data; + + while (data->base != res->start) { + if (!data->base) + return -EINVAL; + data++; + } + + prm->data = data; + + prm->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(prm->base)) + return PTR_ERR(prm->base); + + return omap_prm_reset_init(pdev, prm); +} + +static struct platform_driver omap_prm_driver = { + .probe = omap_prm_probe, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = omap_prm_id_table, + }, +}; +builtin_platform_driver(omap_prm_driver); diff --git a/drivers/soc/xilinx/zynqmp_pm_domains.c b/drivers/soc/xilinx/zynqmp_pm_domains.c index 600f57cf0c2e..23d90cb12ba9 100644 --- a/drivers/soc/xilinx/zynqmp_pm_domains.c +++ b/drivers/soc/xilinx/zynqmp_pm_domains.c @@ -2,7 +2,7 @@ /* * ZynqMP Generic PM domain support * - * Copyright (C) 2015-2018 Xilinx, Inc. + * Copyright (C) 2015-2019 Xilinx, Inc. * * Davorin Mista <davorin.mista@aggios.com> * Jolly Shah <jollys@xilinx.com> @@ -25,6 +25,8 @@ static const struct zynqmp_eemi_ops *eemi_ops; +static int min_capability; + /** * struct zynqmp_pm_domain - Wrapper around struct generic_pm_domain * @gpd: Generic power domain @@ -106,7 +108,7 @@ static int zynqmp_gpd_power_off(struct generic_pm_domain *domain) int ret; struct pm_domain_data *pdd, *tmp; struct zynqmp_pm_domain *pd; - u32 capabilities = 0; + u32 capabilities = min_capability; bool may_wakeup; if (!eemi_ops->set_requirement) @@ -283,6 +285,10 @@ static int zynqmp_gpd_probe(struct platform_device *pdev) if (!domains) return -ENOMEM; + if (!of_device_is_compatible(dev->parent->of_node, + "xlnx,zynqmp-firmware")) + min_capability = ZYNQMP_PM_CAPABILITY_UNUSABLE; + for (i = 0; i < ZYNQMP_NUM_DOMAINS; i++, pd++) { pd->node_id = 0; pd->gpd.name = kasprintf(GFP_KERNEL, "domain%d", i); |