diff options
Diffstat (limited to 'drivers/spi/spi-imx.c')
| -rw-r--r-- | drivers/spi/spi-imx.c | 63 |
1 files changed, 42 insertions, 21 deletions
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 34e5f81ec431..528ae46c087f 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -281,6 +281,7 @@ static bool spi_imx_can_dma(struct spi_controller *controller, struct spi_device #define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs & 3) + 4)) #define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs & 3) + 8)) #define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs & 3) + 12)) +#define MX51_ECSPI_CONFIG_DATACTL(cs) (1 << ((cs & 3) + 16)) #define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs & 3) + 20)) #define MX51_ECSPI_INT 0x10 @@ -516,6 +517,13 @@ static void mx51_ecspi_disable(struct spi_imx_data *spi_imx) writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL); } +static int mx51_ecspi_channel(const struct spi_device *spi) +{ + if (!spi_get_csgpiod(spi, 0)) + return spi_get_chipselect(spi, 0); + return spi->controller->unused_native_cs; +} + static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx, struct spi_message *msg) { @@ -526,6 +534,7 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx, u32 testreg, delay; u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG); u32 current_cfg = cfg; + int channel = mx51_ecspi_channel(spi); /* set Master or Slave mode */ if (spi_imx->slave_mode) @@ -540,7 +549,7 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx, ctrl |= MX51_ECSPI_CTRL_DRCTL(spi_imx->spi_drctl); /* set chip select to use */ - ctrl |= MX51_ECSPI_CTRL_CS(spi_get_chipselect(spi, 0)); + ctrl |= MX51_ECSPI_CTRL_CS(channel); /* * The ctrl register must be written first, with the EN bit set other @@ -561,22 +570,27 @@ static int mx51_ecspi_prepare_message(struct spi_imx_data *spi_imx, * BURST_LENGTH + 1 bits are received */ if (spi_imx->slave_mode && is_imx53_ecspi(spi_imx)) - cfg &= ~MX51_ECSPI_CONFIG_SBBCTRL(spi_get_chipselect(spi, 0)); + cfg &= ~MX51_ECSPI_CONFIG_SBBCTRL(channel); else - cfg |= MX51_ECSPI_CONFIG_SBBCTRL(spi_get_chipselect(spi, 0)); + cfg |= MX51_ECSPI_CONFIG_SBBCTRL(channel); if (spi->mode & SPI_CPOL) { - cfg |= MX51_ECSPI_CONFIG_SCLKPOL(spi_get_chipselect(spi, 0)); - cfg |= MX51_ECSPI_CONFIG_SCLKCTL(spi_get_chipselect(spi, 0)); + cfg |= MX51_ECSPI_CONFIG_SCLKPOL(channel); + cfg |= MX51_ECSPI_CONFIG_SCLKCTL(channel); } else { - cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(spi_get_chipselect(spi, 0)); - cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(spi_get_chipselect(spi, 0)); + cfg &= ~MX51_ECSPI_CONFIG_SCLKPOL(channel); + cfg &= ~MX51_ECSPI_CONFIG_SCLKCTL(channel); } + if (spi->mode & SPI_MOSI_IDLE_LOW) + cfg |= MX51_ECSPI_CONFIG_DATACTL(channel); + else + cfg &= ~MX51_ECSPI_CONFIG_DATACTL(channel); + if (spi->mode & SPI_CS_HIGH) - cfg |= MX51_ECSPI_CONFIG_SSBPOL(spi_get_chipselect(spi, 0)); + cfg |= MX51_ECSPI_CONFIG_SSBPOL(channel); else - cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(spi_get_chipselect(spi, 0)); + cfg &= ~MX51_ECSPI_CONFIG_SSBPOL(channel); if (cfg == current_cfg) return 0; @@ -621,14 +635,15 @@ static void mx51_configure_cpha(struct spi_imx_data *spi_imx, bool cpha = (spi->mode & SPI_CPHA); bool flip_cpha = (spi->mode & SPI_RX_CPHA_FLIP) && spi_imx->rx_only; u32 cfg = readl(spi_imx->base + MX51_ECSPI_CONFIG); + int channel = mx51_ecspi_channel(spi); /* Flip cpha logical value iff flip_cpha */ cpha ^= flip_cpha; if (cpha) - cfg |= MX51_ECSPI_CONFIG_SCLKPHA(spi_get_chipselect(spi, 0)); + cfg |= MX51_ECSPI_CONFIG_SCLKPHA(channel); else - cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(spi_get_chipselect(spi, 0)); + cfg &= ~MX51_ECSPI_CONFIG_SCLKPHA(channel); writel(cfg, spi_imx->base + MX51_ECSPI_CONFIG); } @@ -1737,20 +1752,21 @@ static int spi_imx_probe(struct platform_device *pdev) else controller->num_chipselect = 3; - spi_imx->controller->transfer_one = spi_imx_transfer_one; - spi_imx->controller->setup = spi_imx_setup; - spi_imx->controller->cleanup = spi_imx_cleanup; - spi_imx->controller->prepare_message = spi_imx_prepare_message; - spi_imx->controller->unprepare_message = spi_imx_unprepare_message; - spi_imx->controller->slave_abort = spi_imx_slave_abort; - spi_imx->controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS; + controller->transfer_one = spi_imx_transfer_one; + controller->setup = spi_imx_setup; + controller->cleanup = spi_imx_cleanup; + controller->prepare_message = spi_imx_prepare_message; + controller->unprepare_message = spi_imx_unprepare_message; + controller->slave_abort = spi_imx_slave_abort; + controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS | + SPI_MOSI_IDLE_LOW; if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx)) - spi_imx->controller->mode_bits |= SPI_LOOP | SPI_READY; + controller->mode_bits |= SPI_LOOP | SPI_READY; if (is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx)) - spi_imx->controller->mode_bits |= SPI_RX_CPHA_FLIP; + controller->mode_bits |= SPI_RX_CPHA_FLIP; if (is_imx51_ecspi(spi_imx) && device_property_read_u32(&pdev->dev, "cs-gpios", NULL)) @@ -1759,7 +1775,12 @@ static int spi_imx_probe(struct platform_device *pdev) * setting the burst length to the word size. This is * considerably faster than manually controlling the CS. */ - spi_imx->controller->mode_bits |= SPI_CS_WORD; + controller->mode_bits |= SPI_CS_WORD; + + if (is_imx51_ecspi(spi_imx) || is_imx53_ecspi(spi_imx)) { + controller->max_native_cs = 4; + controller->flags |= SPI_MASTER_GPIO_SS; + } spi_imx->spi_drctl = spi_drctl; |