summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-loopback-test.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/spi-loopback-test.c')
-rw-r--r--drivers/spi/spi-loopback-test.c34
1 files changed, 28 insertions, 6 deletions
diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c
index 3459965004f8..bed7403bb6b3 100644
--- a/drivers/spi/spi-loopback-test.c
+++ b/drivers/spi/spi-loopback-test.c
@@ -32,39 +32,50 @@
#include "spi-test.h"
/* flag to only simulate transfers */
-int simulate_only;
+static int simulate_only;
module_param(simulate_only, int, 0);
MODULE_PARM_DESC(simulate_only, "if not 0 do not execute the spi message");
/* dump spi messages */
-int dump_messages;
+static int dump_messages;
module_param(dump_messages, int, 0);
MODULE_PARM_DESC(dump_messages,
"=1 dump the basic spi_message_structure, " \
"=2 dump the spi_message_structure including data, " \
"=3 dump the spi_message structure before and after execution");
/* the device is jumpered for loopback - enabling some rx_buf tests */
-int loopback;
+static int loopback;
module_param(loopback, int, 0);
MODULE_PARM_DESC(loopback,
"if set enable loopback mode, where the rx_buf " \
"is checked to match tx_buf after the spi_message " \
"is executed");
+static int loop_req;
+module_param(loop_req, int, 0);
+MODULE_PARM_DESC(loop_req,
+ "if set controller will be asked to enable test loop mode. " \
+ "If controller supported it, MISO and MOSI will be connected");
+
+static int no_cs;
+module_param(no_cs, int, 0);
+MODULE_PARM_DESC(no_cs,
+ "if set Chip Select (CS) will not be used");
+
/* run only a specific test */
-int run_only_test = -1;
+static int run_only_test = -1;
module_param(run_only_test, int, 0);
MODULE_PARM_DESC(run_only_test,
"only run the test with this number (0-based !)");
/* use vmalloc'ed buffers */
-int use_vmalloc;
+static int use_vmalloc;
module_param(use_vmalloc, int, 0644);
MODULE_PARM_DESC(use_vmalloc,
"use vmalloc'ed buffers instead of kmalloc'ed");
/* check rx ranges */
-int check_ranges = 1;
+static int check_ranges = 1;
module_param(check_ranges, int, 0644);
MODULE_PARM_DESC(check_ranges,
"checks rx_buffer pattern are valid");
@@ -313,6 +324,17 @@ static int spi_loopback_test_probe(struct spi_device *spi)
{
int ret;
+ if (loop_req || no_cs) {
+ spi->mode |= loop_req ? SPI_LOOP : 0;
+ spi->mode |= no_cs ? SPI_NO_CS : 0;
+ ret = spi_setup(spi);
+ if (ret) {
+ dev_err(&spi->dev, "SPI setup with SPI_LOOP or SPI_NO_CS failed (%d)\n",
+ ret);
+ return ret;
+ }
+ }
+
dev_info(&spi->dev, "Executing spi-loopback-tests\n");
ret = spi_test_run_tests(spi, spi_tests);