summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-stm32.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/spi-stm32.c')
-rw-r--r--drivers/spi/spi-stm32.c1403
1 files changed, 1072 insertions, 331 deletions
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index ad1e55d3d5d5..4186ed20d796 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1,23 +1,10 @@
-/*
- * STMicroelectronics STM32 SPI Controller driver (master mode only)
- *
- * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
- * Author(s): Amelie Delaunay <amelie.delaunay@st.com> for STMicroelectronics.
- *
- * License terms: GPL V2.0.
- *
- * spi_stm32 driver is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * spi_stm32 driver is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License along with
- * spi_stm32 driver. If not, see <http://www.gnu.org/licenses/>.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// STMicroelectronics STM32 SPI Controller driver (master mode only)
+//
+// Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+// Author(s): Amelie Delaunay <amelie.delaunay@st.com> for STMicroelectronics.
+
#include <linux/debugfs.h>
#include <linux/clk.h>
#include <linux/delay.h>
@@ -33,99 +20,251 @@
#define DRIVER_NAME "spi_stm32"
-/* STM32 SPI registers */
-#define STM32_SPI_CR1 0x00
-#define STM32_SPI_CR2 0x04
-#define STM32_SPI_CFG1 0x08
-#define STM32_SPI_CFG2 0x0C
-#define STM32_SPI_IER 0x10
-#define STM32_SPI_SR 0x14
-#define STM32_SPI_IFCR 0x18
-#define STM32_SPI_TXDR 0x20
-#define STM32_SPI_RXDR 0x30
-#define STM32_SPI_I2SCFGR 0x50
-
-/* STM32_SPI_CR1 bit fields */
-#define SPI_CR1_SPE BIT(0)
-#define SPI_CR1_MASRX BIT(8)
-#define SPI_CR1_CSTART BIT(9)
-#define SPI_CR1_CSUSP BIT(10)
-#define SPI_CR1_HDDIR BIT(11)
-#define SPI_CR1_SSI BIT(12)
-
-/* STM32_SPI_CR2 bit fields */
-#define SPI_CR2_TSIZE_SHIFT 0
-#define SPI_CR2_TSIZE GENMASK(15, 0)
-
-/* STM32_SPI_CFG1 bit fields */
-#define SPI_CFG1_DSIZE_SHIFT 0
-#define SPI_CFG1_DSIZE GENMASK(4, 0)
-#define SPI_CFG1_FTHLV_SHIFT 5
-#define SPI_CFG1_FTHLV GENMASK(8, 5)
-#define SPI_CFG1_RXDMAEN BIT(14)
-#define SPI_CFG1_TXDMAEN BIT(15)
-#define SPI_CFG1_MBR_SHIFT 28
-#define SPI_CFG1_MBR GENMASK(30, 28)
-#define SPI_CFG1_MBR_MIN 0
-#define SPI_CFG1_MBR_MAX (GENMASK(30, 28) >> 28)
-
-/* STM32_SPI_CFG2 bit fields */
-#define SPI_CFG2_MIDI_SHIFT 4
-#define SPI_CFG2_MIDI GENMASK(7, 4)
-#define SPI_CFG2_COMM_SHIFT 17
-#define SPI_CFG2_COMM GENMASK(18, 17)
-#define SPI_CFG2_SP_SHIFT 19
-#define SPI_CFG2_SP GENMASK(21, 19)
-#define SPI_CFG2_MASTER BIT(22)
-#define SPI_CFG2_LSBFRST BIT(23)
-#define SPI_CFG2_CPHA BIT(24)
-#define SPI_CFG2_CPOL BIT(25)
-#define SPI_CFG2_SSM BIT(26)
-#define SPI_CFG2_AFCNTR BIT(31)
-
-/* STM32_SPI_IER bit fields */
-#define SPI_IER_RXPIE BIT(0)
-#define SPI_IER_TXPIE BIT(1)
-#define SPI_IER_DXPIE BIT(2)
-#define SPI_IER_EOTIE BIT(3)
-#define SPI_IER_TXTFIE BIT(4)
-#define SPI_IER_OVRIE BIT(6)
-#define SPI_IER_MODFIE BIT(9)
-#define SPI_IER_ALL GENMASK(10, 0)
-
-/* STM32_SPI_SR bit fields */
-#define SPI_SR_RXP BIT(0)
-#define SPI_SR_TXP BIT(1)
-#define SPI_SR_EOT BIT(3)
-#define SPI_SR_OVR BIT(6)
-#define SPI_SR_MODF BIT(9)
-#define SPI_SR_SUSP BIT(11)
-#define SPI_SR_RXPLVL_SHIFT 13
-#define SPI_SR_RXPLVL GENMASK(14, 13)
-#define SPI_SR_RXWNE BIT(15)
-
-/* STM32_SPI_IFCR bit fields */
-#define SPI_IFCR_ALL GENMASK(11, 3)
-
-/* STM32_SPI_I2SCFGR bit fields */
-#define SPI_I2SCFGR_I2SMOD BIT(0)
-
-/* SPI Master Baud Rate min/max divisor */
-#define SPI_MBR_DIV_MIN (2 << SPI_CFG1_MBR_MIN)
-#define SPI_MBR_DIV_MAX (2 << SPI_CFG1_MBR_MAX)
-
-/* SPI Communication mode */
+/* STM32F4 SPI registers */
+#define STM32F4_SPI_CR1 0x00
+#define STM32F4_SPI_CR2 0x04
+#define STM32F4_SPI_SR 0x08
+#define STM32F4_SPI_DR 0x0C
+#define STM32F4_SPI_I2SCFGR 0x1C
+
+/* STM32F4_SPI_CR1 bit fields */
+#define STM32F4_SPI_CR1_CPHA BIT(0)
+#define STM32F4_SPI_CR1_CPOL BIT(1)
+#define STM32F4_SPI_CR1_MSTR BIT(2)
+#define STM32F4_SPI_CR1_BR_SHIFT 3
+#define STM32F4_SPI_CR1_BR GENMASK(5, 3)
+#define STM32F4_SPI_CR1_SPE BIT(6)
+#define STM32F4_SPI_CR1_LSBFRST BIT(7)
+#define STM32F4_SPI_CR1_SSI BIT(8)
+#define STM32F4_SPI_CR1_SSM BIT(9)
+#define STM32F4_SPI_CR1_RXONLY BIT(10)
+#define STM32F4_SPI_CR1_DFF BIT(11)
+#define STM32F4_SPI_CR1_CRCNEXT BIT(12)
+#define STM32F4_SPI_CR1_CRCEN BIT(13)
+#define STM32F4_SPI_CR1_BIDIOE BIT(14)
+#define STM32F4_SPI_CR1_BIDIMODE BIT(15)
+#define STM32F4_SPI_CR1_BR_MIN 0
+#define STM32F4_SPI_CR1_BR_MAX (GENMASK(5, 3) >> 3)
+
+/* STM32F4_SPI_CR2 bit fields */
+#define STM32F4_SPI_CR2_RXDMAEN BIT(0)
+#define STM32F4_SPI_CR2_TXDMAEN BIT(1)
+#define STM32F4_SPI_CR2_SSOE BIT(2)
+#define STM32F4_SPI_CR2_FRF BIT(4)
+#define STM32F4_SPI_CR2_ERRIE BIT(5)
+#define STM32F4_SPI_CR2_RXNEIE BIT(6)
+#define STM32F4_SPI_CR2_TXEIE BIT(7)
+
+/* STM32F4_SPI_SR bit fields */
+#define STM32F4_SPI_SR_RXNE BIT(0)
+#define STM32F4_SPI_SR_TXE BIT(1)
+#define STM32F4_SPI_SR_CHSIDE BIT(2)
+#define STM32F4_SPI_SR_UDR BIT(3)
+#define STM32F4_SPI_SR_CRCERR BIT(4)
+#define STM32F4_SPI_SR_MODF BIT(5)
+#define STM32F4_SPI_SR_OVR BIT(6)
+#define STM32F4_SPI_SR_BSY BIT(7)
+#define STM32F4_SPI_SR_FRE BIT(8)
+
+/* STM32F4_SPI_I2SCFGR bit fields */
+#define STM32F4_SPI_I2SCFGR_I2SMOD BIT(11)
+
+/* STM32F4 SPI Baud Rate min/max divisor */
+#define STM32F4_SPI_BR_DIV_MIN (2 << STM32F4_SPI_CR1_BR_MIN)
+#define STM32F4_SPI_BR_DIV_MAX (2 << STM32F4_SPI_CR1_BR_MAX)
+
+/* STM32H7 SPI registers */
+#define STM32H7_SPI_CR1 0x00
+#define STM32H7_SPI_CR2 0x04
+#define STM32H7_SPI_CFG1 0x08
+#define STM32H7_SPI_CFG2 0x0C
+#define STM32H7_SPI_IER 0x10
+#define STM32H7_SPI_SR 0x14
+#define STM32H7_SPI_IFCR 0x18
+#define STM32H7_SPI_TXDR 0x20
+#define STM32H7_SPI_RXDR 0x30
+#define STM32H7_SPI_I2SCFGR 0x50
+
+/* STM32H7_SPI_CR1 bit fields */
+#define STM32H7_SPI_CR1_SPE BIT(0)
+#define STM32H7_SPI_CR1_MASRX BIT(8)
+#define STM32H7_SPI_CR1_CSTART BIT(9)
+#define STM32H7_SPI_CR1_CSUSP BIT(10)
+#define STM32H7_SPI_CR1_HDDIR BIT(11)
+#define STM32H7_SPI_CR1_SSI BIT(12)
+
+/* STM32H7_SPI_CR2 bit fields */
+#define STM32H7_SPI_CR2_TSIZE_SHIFT 0
+#define STM32H7_SPI_CR2_TSIZE GENMASK(15, 0)
+
+/* STM32H7_SPI_CFG1 bit fields */
+#define STM32H7_SPI_CFG1_DSIZE_SHIFT 0
+#define STM32H7_SPI_CFG1_DSIZE GENMASK(4, 0)
+#define STM32H7_SPI_CFG1_FTHLV_SHIFT 5
+#define STM32H7_SPI_CFG1_FTHLV GENMASK(8, 5)
+#define STM32H7_SPI_CFG1_RXDMAEN BIT(14)
+#define STM32H7_SPI_CFG1_TXDMAEN BIT(15)
+#define STM32H7_SPI_CFG1_MBR_SHIFT 28
+#define STM32H7_SPI_CFG1_MBR GENMASK(30, 28)
+#define STM32H7_SPI_CFG1_MBR_MIN 0
+#define STM32H7_SPI_CFG1_MBR_MAX (GENMASK(30, 28) >> 28)
+
+/* STM32H7_SPI_CFG2 bit fields */
+#define STM32H7_SPI_CFG2_MIDI_SHIFT 4
+#define STM32H7_SPI_CFG2_MIDI GENMASK(7, 4)
+#define STM32H7_SPI_CFG2_COMM_SHIFT 17
+#define STM32H7_SPI_CFG2_COMM GENMASK(18, 17)
+#define STM32H7_SPI_CFG2_SP_SHIFT 19
+#define STM32H7_SPI_CFG2_SP GENMASK(21, 19)
+#define STM32H7_SPI_CFG2_MASTER BIT(22)
+#define STM32H7_SPI_CFG2_LSBFRST BIT(23)
+#define STM32H7_SPI_CFG2_CPHA BIT(24)
+#define STM32H7_SPI_CFG2_CPOL BIT(25)
+#define STM32H7_SPI_CFG2_SSM BIT(26)
+#define STM32H7_SPI_CFG2_AFCNTR BIT(31)
+
+/* STM32H7_SPI_IER bit fields */
+#define STM32H7_SPI_IER_RXPIE BIT(0)
+#define STM32H7_SPI_IER_TXPIE BIT(1)
+#define STM32H7_SPI_IER_DXPIE BIT(2)
+#define STM32H7_SPI_IER_EOTIE BIT(3)
+#define STM32H7_SPI_IER_TXTFIE BIT(4)
+#define STM32H7_SPI_IER_OVRIE BIT(6)
+#define STM32H7_SPI_IER_MODFIE BIT(9)
+#define STM32H7_SPI_IER_ALL GENMASK(10, 0)
+
+/* STM32H7_SPI_SR bit fields */
+#define STM32H7_SPI_SR_RXP BIT(0)
+#define STM32H7_SPI_SR_TXP BIT(1)
+#define STM32H7_SPI_SR_EOT BIT(3)
+#define STM32H7_SPI_SR_OVR BIT(6)
+#define STM32H7_SPI_SR_MODF BIT(9)
+#define STM32H7_SPI_SR_SUSP BIT(11)
+#define STM32H7_SPI_SR_RXPLVL_SHIFT 13
+#define STM32H7_SPI_SR_RXPLVL GENMASK(14, 13)
+#define STM32H7_SPI_SR_RXWNE BIT(15)
+
+/* STM32H7_SPI_IFCR bit fields */
+#define STM32H7_SPI_IFCR_ALL GENMASK(11, 3)
+
+/* STM32H7_SPI_I2SCFGR bit fields */
+#define STM32H7_SPI_I2SCFGR_I2SMOD BIT(0)
+
+/* STM32H7 SPI Master Baud Rate min/max divisor */
+#define STM32H7_SPI_MBR_DIV_MIN (2 << STM32H7_SPI_CFG1_MBR_MIN)
+#define STM32H7_SPI_MBR_DIV_MAX (2 << STM32H7_SPI_CFG1_MBR_MAX)
+
+/* STM32H7 SPI Communication mode */
+#define STM32H7_SPI_FULL_DUPLEX 0
+#define STM32H7_SPI_SIMPLEX_TX 1
+#define STM32H7_SPI_SIMPLEX_RX 2
+#define STM32H7_SPI_HALF_DUPLEX 3
+
+/* SPI Communication type */
#define SPI_FULL_DUPLEX 0
#define SPI_SIMPLEX_TX 1
#define SPI_SIMPLEX_RX 2
-#define SPI_HALF_DUPLEX 3
+#define SPI_3WIRE_TX 3
+#define SPI_3WIRE_RX 4
#define SPI_1HZ_NS 1000000000
+/*
+ * use PIO for small transfers, avoiding DMA setup/teardown overhead for drivers
+ * without fifo buffers.
+ */
+#define SPI_DMA_MIN_BYTES 16
+
+/**
+ * stm32_spi_reg - stm32 SPI register & bitfield desc
+ * @reg: register offset
+ * @mask: bitfield mask
+ * @shift: left shift
+ */
+struct stm32_spi_reg {
+ int reg;
+ int mask;
+ int shift;
+};
+
+/**
+ * stm32_spi_regspec - stm32 registers definition, compatible dependent data
+ * en: enable register and SPI enable bit
+ * dma_rx_en: SPI DMA RX enable register end SPI DMA RX enable bit
+ * dma_tx_en: SPI DMA TX enable register end SPI DMA TX enable bit
+ * cpol: clock polarity register and polarity bit
+ * cpha: clock phase register and phase bit
+ * lsb_first: LSB transmitted first register and bit
+ * br: baud rate register and bitfields
+ * rx: SPI RX data register
+ * tx: SPI TX data register
+ */
+struct stm32_spi_regspec {
+ const struct stm32_spi_reg en;
+ const struct stm32_spi_reg dma_rx_en;
+ const struct stm32_spi_reg dma_tx_en;
+ const struct stm32_spi_reg cpol;
+ const struct stm32_spi_reg cpha;
+ const struct stm32_spi_reg lsb_first;
+ const struct stm32_spi_reg br;
+ const struct stm32_spi_reg rx;
+ const struct stm32_spi_reg tx;
+};
+
+struct stm32_spi;
+
+/**
+ * stm32_spi_cfg - stm32 compatible configuration data
+ * @regs: registers descriptions
+ * @get_fifo_size: routine to get fifo size
+ * @get_bpw_mask: routine to get bits per word mask
+ * @disable: routine to disable controller
+ * @config: routine to configure controller as SPI Master
+ * @set_bpw: routine to configure registers to for bits per word
+ * @set_mode: routine to configure registers to desired mode
+ * @set_data_idleness: optional routine to configure registers to desired idle
+ * time between frames (if driver has this functionality)
+ * set_number_of_data: optional routine to configure registers to desired
+ * number of data (if driver has this functionality)
+ * @can_dma: routine to determine if the transfer is eligible for DMA use
+ * @transfer_one_dma_start: routine to start transfer a single spi_transfer
+ * using DMA
+ * @dma_rx cb: routine to call after DMA RX channel operation is complete
+ * @dma_tx cb: routine to call after DMA TX channel operation is complete
+ * @transfer_one_irq: routine to configure interrupts for driver
+ * @irq_handler_event: Interrupt handler for SPI controller events
+ * @irq_handler_thread: thread of interrupt handler for SPI controller
+ * @baud_rate_div_min: minimum baud rate divisor
+ * @baud_rate_div_max: maximum baud rate divisor
+ * @has_fifo: boolean to know if fifo is used for driver
+ * @has_startbit: boolean to know if start bit is used to start transfer
+ */
+struct stm32_spi_cfg {
+ const struct stm32_spi_regspec *regs;
+ int (*get_fifo_size)(struct stm32_spi *spi);
+ int (*get_bpw_mask)(struct stm32_spi *spi);
+ void (*disable)(struct stm32_spi *spi);
+ int (*config)(struct stm32_spi *spi);
+ void (*set_bpw)(struct stm32_spi *spi);
+ int (*set_mode)(struct stm32_spi *spi, unsigned int comm_type);
+ void (*set_data_idleness)(struct stm32_spi *spi, u32 length);
+ int (*set_number_of_data)(struct stm32_spi *spi, u32 length);
+ void (*transfer_one_dma_start)(struct stm32_spi *spi);
+ void (*dma_rx_cb)(void *data);
+ void (*dma_tx_cb)(void *data);
+ int (*transfer_one_irq)(struct stm32_spi *spi);
+ irqreturn_t (*irq_handler_event)(int irq, void *dev_id);
+ irqreturn_t (*irq_handler_thread)(int irq, void *dev_id);
+ unsigned int baud_rate_div_min;
+ unsigned int baud_rate_div_max;
+ bool has_fifo;
+};
+
/**
* struct stm32_spi - private data of the SPI controller
* @dev: driver model representation of the controller
* @master: controller master interface
+ * @cfg: compatible configuration data
* @base: virtual memory area
* @clk: hw kernel clock feeding the SPI clock generator
* @clk_rate: rate of the hw kernel clock feeding the SPI clock generator
@@ -151,6 +290,7 @@
struct stm32_spi {
struct device *dev;
struct spi_master *master;
+ const struct stm32_spi_cfg *cfg;
void __iomem *base;
struct clk *clk;
u32 clk_rate;
@@ -176,6 +316,40 @@ struct stm32_spi {
dma_addr_t phys_addr;
};
+static const struct stm32_spi_regspec stm32f4_spi_regspec = {
+ .en = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_SPE },
+
+ .dma_rx_en = { STM32F4_SPI_CR2, STM32F4_SPI_CR2_RXDMAEN },
+ .dma_tx_en = { STM32F4_SPI_CR2, STM32F4_SPI_CR2_TXDMAEN },
+
+ .cpol = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_CPOL },
+ .cpha = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_CPHA },
+ .lsb_first = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_LSBFRST },
+ .br = { STM32F4_SPI_CR1, STM32F4_SPI_CR1_BR, STM32F4_SPI_CR1_BR_SHIFT },
+
+ .rx = { STM32F4_SPI_DR },
+ .tx = { STM32F4_SPI_DR },
+};
+
+static const struct stm32_spi_regspec stm32h7_spi_regspec = {
+ /* SPI data transfer is enabled but spi_ker_ck is idle.
+ * CFG1 and CFG2 registers are write protected when SPE is enabled.
+ */
+ .en = { STM32H7_SPI_CR1, STM32H7_SPI_CR1_SPE },
+
+ .dma_rx_en = { STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_RXDMAEN },
+ .dma_tx_en = { STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_TXDMAEN },
+
+ .cpol = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_CPOL },
+ .cpha = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_CPHA },
+ .lsb_first = { STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_LSBFRST },
+ .br = { STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_MBR,
+ STM32H7_SPI_CFG1_MBR_SHIFT },
+
+ .rx = { STM32H7_SPI_RXDR },
+ .tx = { STM32H7_SPI_TXDR },
+};
+
static inline void stm32_spi_set_bits(struct stm32_spi *spi,
u32 offset, u32 bits)
{
@@ -191,22 +365,22 @@ static inline void stm32_spi_clr_bits(struct stm32_spi *spi,
}
/**
- * stm32_spi_get_fifo_size - Return fifo size
+ * stm32h7_spi_get_fifo_size - Return fifo size
* @spi: pointer to the spi controller data structure
*/
-static int stm32_spi_get_fifo_size(struct stm32_spi *spi)
+static int stm32h7_spi_get_fifo_size(struct stm32_spi *spi)
{
unsigned long flags;
u32 count = 0;
spin_lock_irqsave(&spi->lock, flags);
- stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_SPE);
+ stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SPE);
- while (readl_relaxed(spi->base + STM32_SPI_SR) & SPI_SR_TXP)
- writeb_relaxed(++count, spi->base + STM32_SPI_TXDR);
+ while (readl_relaxed(spi->base + STM32H7_SPI_SR) & STM32H7_SPI_SR_TXP)
+ writeb_relaxed(++count, spi->base + STM32H7_SPI_TXDR);
- stm32_spi_clr_bits(spi, STM32_SPI_CR1, SPI_CR1_SPE);
+ stm32_spi_clr_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SPE);
spin_unlock_irqrestore(&spi->lock, flags);
@@ -216,10 +390,20 @@ static int stm32_spi_get_fifo_size(struct stm32_spi *spi)
}
/**
- * stm32_spi_get_bpw_mask - Return bits per word mask
+ * stm32f4_spi_get_bpw_mask - Return bits per word mask
* @spi: pointer to the spi controller data structure
*/
-static int stm32_spi_get_bpw_mask(struct stm32_spi *spi)
+static int stm32f4_spi_get_bpw_mask(struct stm32_spi *spi)
+{
+ dev_dbg(spi->dev, "8-bit or 16-bit data frame supported\n");
+ return SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
+}
+
+/**
+ * stm32h7_spi_get_bpw_mask - Return bits per word mask
+ * @spi: pointer to the spi controller data structure
+ */
+static int stm32h7_spi_get_bpw_mask(struct stm32_spi *spi)
{
unsigned long flags;
u32 cfg1, max_bpw;
@@ -230,10 +414,11 @@ static int stm32_spi_get_bpw_mask(struct stm32_spi *spi)
* The most significant bit at DSIZE bit field is reserved when the
* maximum data size of periperal instances is limited to 16-bit
*/
- stm32_spi_set_bits(spi, STM32_SPI_CFG1, SPI_CFG1_DSIZE);
+ stm32_spi_set_bits(spi, STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_DSIZE);
- cfg1 = readl_relaxed(spi->base + STM32_SPI_CFG1);
- max_bpw = (cfg1 & SPI_CFG1_DSIZE) >> SPI_CFG1_DSIZE_SHIFT;
+ cfg1 = readl_relaxed(spi->base + STM32H7_SPI_CFG1);
+ max_bpw = (cfg1 & STM32H7_SPI_CFG1_DSIZE) >>
+ STM32H7_SPI_CFG1_DSIZE_SHIFT;
max_bpw += 1;
spin_unlock_irqrestore(&spi->lock, flags);
@@ -244,13 +429,16 @@ static int stm32_spi_get_bpw_mask(struct stm32_spi *spi)
}
/**
- * stm32_spi_prepare_mbr - Determine SPI_CFG1.MBR value
+ * stm32_spi_prepare_mbr - Determine baud rate divisor value
* @spi: pointer to the spi controller data structure
* @speed_hz: requested speed
+ * @min_div: minimum baud rate divisor
+ * @max_div: maximum baud rate divisor
*
- * Return SPI_CFG1.MBR value in case of success or -EINVAL
+ * Return baud rate divisor value in case of success or -EINVAL
*/
-static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz)
+static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz,
+ u32 min_div, u32 max_div)
{
u32 div, mbrdiv;
@@ -263,8 +451,7 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz)
* no need to check it there.
* However, we need to ensure the following calculations.
*/
- if (div < SPI_MBR_DIV_MIN ||
- div > SPI_MBR_DIV_MAX)
+ if ((div < min_div) || (div > max_div))
return -EINVAL;
/* Determine the first power of 2 greater than or equal to div */
@@ -279,10 +466,10 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz)
}
/**
- * stm32_spi_prepare_fthlv - Determine FIFO threshold level
+ * stm32h7_spi_prepare_fthlv - Determine FIFO threshold level
* @spi: pointer to the spi controller data structure
*/
-static u32 stm32_spi_prepare_fthlv(struct stm32_spi *spi)
+static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi)
{
u32 fthlv, half_fifo;
@@ -306,32 +493,62 @@ static u32 stm32_spi_prepare_fthlv(struct stm32_spi *spi)
}
/**
- * stm32_spi_write_txfifo - Write bytes in Transmit Data Register
+ * stm32f4_spi_write_tx - Write bytes to Transmit Data Register
* @spi: pointer to the spi controller data structure
*
* Read from tx_buf depends on remaining bytes to avoid to read beyond
* tx_buf end.
*/
-static void stm32_spi_write_txfifo(struct stm32_spi *spi)
+static void stm32f4_spi_write_tx(struct stm32_spi *spi)
+{
+ if ((spi->tx_len > 0) && (readl_relaxed(spi->base + STM32F4_SPI_SR) &
+ STM32F4_SPI_SR_TXE)) {
+ u32 offs = spi->cur_xferlen - spi->tx_len;
+
+ if (spi->cur_bpw == 16) {
+ const u16 *tx_buf16 = (const u16 *)(spi->tx_buf + offs);
+
+ writew_relaxed(*tx_buf16, spi->base + STM32F4_SPI_DR);
+ spi->tx_len -= sizeof(u16);
+ } else {
+ const u8 *tx_buf8 = (const u8 *)(spi->tx_buf + offs);
+
+ writeb_relaxed(*tx_buf8, spi->base + STM32F4_SPI_DR);
+ spi->tx_len -= sizeof(u8);
+ }
+ }
+
+ dev_dbg(spi->dev, "%s: %d bytes left\n", __func__, spi->tx_len);
+}
+
+/**
+ * stm32h7_spi_write_txfifo - Write bytes in Transmit Data Register
+ * @spi: pointer to the spi controller data structure
+ *
+ * Read from tx_buf depends on remaining bytes to avoid to read beyond
+ * tx_buf end.
+ */
+static void stm32h7_spi_write_txfifo(struct stm32_spi *spi)
{
while ((spi->tx_len > 0) &&
- (readl_relaxed(spi->base + STM32_SPI_SR) & SPI_SR_TXP)) {
+ (readl_relaxed(spi->base + STM32H7_SPI_SR) &
+ STM32H7_SPI_SR_TXP)) {
u32 offs = spi->cur_xferlen - spi->tx_len;
if (spi->tx_len >= sizeof(u32)) {
const u32 *tx_buf32 = (const u32 *)(spi->tx_buf + offs);
- writel_relaxed(*tx_buf32, spi->base + STM32_SPI_TXDR);
+ writel_relaxed(*tx_buf32, spi->base + STM32H7_SPI_TXDR);
spi->tx_len -= sizeof(u32);
} else if (spi->tx_len >= sizeof(u16)) {
const u16 *tx_buf16 = (const u16 *)(spi->tx_buf + offs);
- writew_relaxed(*tx_buf16, spi->base + STM32_SPI_TXDR);
+ writew_relaxed(*tx_buf16, spi->base + STM32H7_SPI_TXDR);
spi->tx_len -= sizeof(u16);
} else {
const u8 *tx_buf8 = (const u8 *)(spi->tx_buf + offs);
- writeb_relaxed(*tx_buf8, spi->base + STM32_SPI_TXDR);
+ writeb_relaxed(*tx_buf8, spi->base + STM32H7_SPI_TXDR);
spi->tx_len -= sizeof(u8);
}
}
@@ -340,43 +557,74 @@ static void stm32_spi_write_txfifo(struct stm32_spi *spi)
}
/**
- * stm32_spi_read_rxfifo - Read bytes in Receive Data Register
+ * stm32f4_spi_read_rx - Read bytes from Receive Data Register
+ * @spi: pointer to the spi controller data structure
+ *
+ * Write in rx_buf depends on remaining bytes to avoid to write beyond
+ * rx_buf end.
+ */
+static void stm32f4_spi_read_rx(struct stm32_spi *spi)
+{
+ if ((spi->rx_len > 0) && (readl_relaxed(spi->base + STM32F4_SPI_SR) &
+ STM32F4_SPI_SR_RXNE)) {
+ u32 offs = spi->cur_xferlen - spi->rx_len;
+
+ if (spi->cur_bpw == 16) {
+ u16 *rx_buf16 = (u16 *)(spi->rx_buf + offs);
+
+ *rx_buf16 = readw_relaxed(spi->base + STM32F4_SPI_DR);
+ spi->rx_len -= sizeof(u16);
+ } else {
+ u8 *rx_buf8 = (u8 *)(spi->rx_buf + offs);
+
+ *rx_buf8 = readb_relaxed(spi->base + STM32F4_SPI_DR);
+ spi->rx_len -= sizeof(u8);
+ }
+ }
+
+ dev_dbg(spi->dev, "%s: %d bytes left\n", __func__, spi->rx_len);
+}
+
+/**
+ * stm32h7_spi_read_rxfifo - Read bytes in Receive Data Register
* @spi: pointer to the spi controller data structure
*
* Write in rx_buf depends on remaining bytes to avoid to write beyond
* rx_buf end.
*/
-static void stm32_spi_read_rxfifo(struct stm32_spi *spi, bool flush)
+static void stm32h7_spi_read_rxfifo(struct stm32_spi *spi, bool flush)
{
- u32 sr = readl_relaxed(spi->base + STM32_SPI_SR);
- u32 rxplvl = (sr & SPI_SR_RXPLVL) >> SPI_SR_RXPLVL_SHIFT;
+ u32 sr = readl_relaxed(spi->base + STM32H7_SPI_SR);
+ u32 rxplvl = (sr & STM32H7_SPI_SR_RXPLVL) >>
+ STM32H7_SPI_SR_RXPLVL_SHIFT;
while ((spi->rx_len > 0) &&
- ((sr & SPI_SR_RXP) ||
- (flush && ((sr & SPI_SR_RXWNE) || (rxplvl > 0))))) {
+ ((sr & STM32H7_SPI_SR_RXP) ||
+ (flush && ((sr & STM32H7_SPI_SR_RXWNE) || (rxplvl > 0))))) {
u32 offs = spi->cur_xferlen - spi->rx_len;
if ((spi->rx_len >= sizeof(u32)) ||
- (flush && (sr & SPI_SR_RXWNE))) {
+ (flush && (sr & STM32H7_SPI_SR_RXWNE))) {
u32 *rx_buf32 = (u32 *)(spi->rx_buf + offs);
- *rx_buf32 = readl_relaxed(spi->base + STM32_SPI_RXDR);
+ *rx_buf32 = readl_relaxed(spi->base + STM32H7_SPI_RXDR);
spi->rx_len -= sizeof(u32);
} else if ((spi->rx_len >= sizeof(u16)) ||
(flush && (rxplvl >= 2 || spi->cur_bpw > 8))) {
u16 *rx_buf16 = (u16 *)(spi->rx_buf + offs);
- *rx_buf16 = readw_relaxed(spi->base + STM32_SPI_RXDR);
+ *rx_buf16 = readw_relaxed(spi->base + STM32H7_SPI_RXDR);
spi->rx_len -= sizeof(u16);
} else {
u8 *rx_buf8 = (u8 *)(spi->rx_buf + offs);
- *rx_buf8 = readb_relaxed(spi->base + STM32_SPI_RXDR);
+ *rx_buf8 = readb_relaxed(spi->base + STM32H7_SPI_RXDR);
spi->rx_len -= sizeof(u8);
}
- sr = readl_relaxed(spi->base + STM32_SPI_SR);
- rxplvl = (sr & SPI_SR_RXPLVL) >> SPI_SR_RXPLVL_SHIFT;
+ sr = readl_relaxed(spi->base + STM32H7_SPI_SR);
+ rxplvl = (sr & STM32H7_SPI_SR_RXPLVL) >>
+ STM32H7_SPI_SR_RXPLVL_SHIFT;
}
dev_dbg(spi->dev, "%s%s: %d bytes left\n", __func__,
@@ -386,26 +634,76 @@ static void stm32_spi_read_rxfifo(struct stm32_spi *spi, bool flush)
/**
* stm32_spi_enable - Enable SPI controller
* @spi: pointer to the spi controller data structure
- *
- * SPI data transfer is enabled but spi_ker_ck is idle.
- * SPI_CFG1 and SPI_CFG2 are now write protected.
*/
static void stm32_spi_enable(struct stm32_spi *spi)
{
dev_dbg(spi->dev, "enable controller\n");
- stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_SPE);
+ stm32_spi_set_bits(spi, spi->cfg->regs->en.reg,
+ spi->cfg->regs->en.mask);
}
/**
- * stm32_spi_disable - Disable SPI controller
+ * stm32f4_spi_disable - Disable SPI controller
+ * @spi: pointer to the spi controller data structure
+ */
+static void stm32f4_spi_disable(struct stm32_spi *spi)
+{
+ unsigned long flags;
+ u32 sr;
+
+ dev_dbg(spi->dev, "disable controller\n");
+
+ spin_lock_irqsave(&spi->lock, flags);
+
+ if (!(readl_relaxed(spi->base + STM32F4_SPI_CR1) &
+ STM32F4_SPI_CR1_SPE)) {
+ spin_unlock_irqrestore(&spi->lock, flags);
+ return;
+ }
+
+ /* Disable interrupts */
+ stm32_spi_clr_bits(spi, STM32F4_SPI_CR2, STM32F4_SPI_CR2_TXEIE |
+ STM32F4_SPI_CR2_RXNEIE |
+ STM32F4_SPI_CR2_ERRIE);
+
+ /* Wait until BSY = 0 */
+ if (readl_relaxed_poll_timeout_atomic(spi->base + STM32F4_SPI_SR,
+ sr, !(sr & STM32F4_SPI_SR_BSY),
+ 10, 100000) < 0) {
+ dev_warn(spi->dev, "disabling condition timeout\n");
+ }
+
+ if (spi->cur_usedma && spi->dma_tx)
+ dmaengine_terminate_all(spi->dma_tx);
+ if (spi->cur_usedma && spi->dma_rx)
+ dmaengine_terminate_all(spi->dma_rx);
+
+ stm32_spi_clr_bits(spi, STM32F4_SPI_CR1, STM32F4_SPI_CR1_SPE);
+
+ stm32_spi_clr_bits(spi, STM32F4_SPI_CR2, STM32F4_SPI_CR2_TXDMAEN |
+ STM32F4_SPI_CR2_RXDMAEN);
+
+ /* Sequence to clear OVR flag */
+ readl_relaxed(spi->base + STM32F4_SPI_DR);
+ readl_relaxed(spi->base + STM32F4_SPI_SR);
+
+ spin_unlock_irqrestore(&spi->lock, flags);
+}
+
+/**
+ * stm32h7_spi_disable - Disable SPI controller
* @spi: pointer to the spi controller data structure
*
* RX-Fifo is flushed when SPI controller is disabled. To prevent any data
- * loss, use stm32_spi_read_rxfifo(flush) to read the remaining bytes in
+ * loss, use stm32h7_spi_read_rxfifo(flush) to read the remaining bytes in
* RX-Fifo.
+ * Normally, if TSIZE has been configured, we should relax the hardware at the
+ * reception of the EOT interrupt. But in case of error, EOT will not be
+ * raised. So the subsystem unprepare_message call allows us to properly
+ * complete the transfer from an hardware point of view.
*/
-static void stm32_spi_disable(struct stm32_spi *spi)
+static void stm32h7_spi_disable(struct stm32_spi *spi)
{
unsigned long flags;
u32 cr1, sr;
@@ -414,23 +712,23 @@ static void stm32_spi_disable(struct stm32_spi *spi)
spin_lock_irqsave(&spi->lock, flags);
- cr1 = readl_relaxed(spi->base + STM32_SPI_CR1);
+ cr1 = readl_relaxed(spi->base + STM32H7_SPI_CR1);
- if (!(cr1 & SPI_CR1_SPE)) {
+ if (!(cr1 & STM32H7_SPI_CR1_SPE)) {
spin_unlock_irqrestore(&spi->lock, flags);
return;
}
/* Wait on EOT or suspend the flow */
- if (readl_relaxed_poll_timeout_atomic(spi->base + STM32_SPI_SR,
- sr, !(sr & SPI_SR_EOT),
+ if (readl_relaxed_poll_timeout_atomic(spi->base + STM32H7_SPI_SR,
+ sr, !(sr & STM32H7_SPI_SR_EOT),
10, 100000) < 0) {
- if (cr1 & SPI_CR1_CSTART) {
- writel_relaxed(cr1 | SPI_CR1_CSUSP,
- spi->base + STM32_SPI_CR1);
+ if (cr1 & STM32H7_SPI_CR1_CSTART) {
+ writel_relaxed(cr1 | STM32H7_SPI_CR1_CSUSP,
+ spi->base + STM32H7_SPI_CR1);
if (readl_relaxed_poll_timeout_atomic(
- spi->base + STM32_SPI_SR,
- sr, !(sr & SPI_SR_SUSP),
+ spi->base + STM32H7_SPI_SR,
+ sr, !(sr & STM32H7_SPI_SR_SUSP),
10, 100000) < 0)
dev_warn(spi->dev,
"Suspend request timeout\n");
@@ -438,21 +736,21 @@ static void stm32_spi_disable(struct stm32_spi *spi)
}
if (!spi->cur_usedma && spi->rx_buf && (spi->rx_len > 0))
- stm32_spi_read_rxfifo(spi, true);
+ stm32h7_spi_read_rxfifo(spi, true);
- if (spi->cur_usedma && spi->tx_buf)
+ if (spi->cur_usedma && spi->dma_tx)
dmaengine_terminate_all(spi->dma_tx);
- if (spi->cur_usedma && spi->rx_buf)
+ if (spi->cur_usedma && spi->dma_rx)
dmaengine_terminate_all(spi->dma_rx);
- stm32_spi_clr_bits(spi, STM32_SPI_CR1, SPI_CR1_SPE);
+ stm32_spi_clr_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SPE);
- stm32_spi_clr_bits(spi, STM32_SPI_CFG1, SPI_CFG1_TXDMAEN |
- SPI_CFG1_RXDMAEN);
+ stm32_spi_clr_bits(spi, STM32H7_SPI_CFG1, STM32H7_SPI_CFG1_TXDMAEN |
+ STM32H7_SPI_CFG1_RXDMAEN);
/* Disable interrupts and clear status flags */
- writel_relaxed(0, spi->base + STM32_SPI_IER);
- writel_relaxed(SPI_IFCR_ALL, spi->base + STM32_SPI_IFCR);
+ writel_relaxed(0, spi->base + STM32H7_SPI_IER);
+ writel_relaxed(STM32H7_SPI_IFCR_ALL, spi->base + STM32H7_SPI_IFCR);
spin_unlock_irqrestore(&spi->lock, flags);
}
@@ -460,26 +758,136 @@ static void stm32_spi_disable(struct stm32_spi *spi)
/**
* stm32_spi_can_dma - Determine if the transfer is eligible for DMA use
*
- * If the current transfer size is greater than fifo size, use DMA.
+ * If driver has fifo and the current transfer size is greater than fifo size,
+ * use DMA. Otherwise use DMA for transfer longer than defined DMA min bytes.
*/
static bool stm32_spi_can_dma(struct spi_master *master,
struct spi_device *spi_dev,
struct spi_transfer *transfer)
{
+ unsigned int dma_size;
struct stm32_spi *spi = spi_master_get_devdata(master);
+ if (spi->cfg->has_fifo)
+ dma_size = spi->fifo_size;
+ else
+ dma_size = SPI_DMA_MIN_BYTES;
+
dev_dbg(spi->dev, "%s: %s\n", __func__,
- (transfer->len > spi->fifo_size) ? "true" : "false");
+ (transfer->len > dma_size) ? "true" : "false");
+
+ return (transfer->len > dma_size);
+}
+
+/**
+ * stm32f4_spi_irq_event - Interrupt handler for SPI controller events
+ * @irq: interrupt line
+ * @dev_id: SPI controller master interface
+ */
+static irqreturn_t stm32f4_spi_irq_event(int irq, void *dev_id)
+{
+ struct spi_master *master = dev_id;
+ struct stm32_spi *spi = spi_master_get_devdata(master);
+ u32 sr, mask = 0;
+ unsigned long flags;
+ bool end = false;
+
+ spin_lock_irqsave(&spi->lock, flags);
+
+ sr = readl_relaxed(spi->base + STM32F4_SPI_SR);
+ /*
+ * BSY flag is not handled in interrupt but it is normal behavior when
+ * this flag is set.
+ */
+ sr &= ~STM32F4_SPI_SR_BSY;
+
+ if (!spi->cur_usedma && (spi->cur_comm == SPI_SIMPLEX_TX ||
+ spi->cur_comm == SPI_3WIRE_TX)) {
+ /* OVR flag shouldn't be handled for TX only mode */
+ sr &= ~STM32F4_SPI_SR_OVR | STM32F4_SPI_SR_RXNE;
+ mask |= STM32F4_SPI_SR_TXE;
+ }
+
+ if (!spi->cur_usedma && spi->cur_comm == SPI_FULL_DUPLEX) {
+ /* TXE flag is set and is handled when RXNE flag occurs */
+ sr &= ~STM32F4_SPI_SR_TXE;
+ mask |= STM32F4_SPI_SR_RXNE | STM32F4_SPI_SR_OVR;
+ }
+
+ if (!(sr & mask)) {
+ dev_dbg(spi->dev, "spurious IT (sr=0x%08x)\n", sr);
+ spin_unlock_irqrestore(&spi->lock, flags);
+ return IRQ_NONE;
+ }
+
+ if (sr & STM32F4_SPI_SR_OVR) {
+ dev_warn(spi->dev, "Overrun: received value discarded\n");
+
+ /* Sequence to clear OVR flag */
+ readl_relaxed(spi->base + STM32F4_SPI_DR);
+ readl_relaxed(spi->base + STM32F4_SPI_SR);
+
+ /*
+ * If overrun is detected, it means that something went wrong,
+ * so stop the current transfer. Transfer can wait for next
+ * RXNE but DR is already read and end never happens.
+ */
+ end = true;
+ goto end_irq;
+ }
+
+ if (sr & STM32F4_SPI_SR_TXE) {
+ if (spi->tx_buf)
+ stm32f4_spi_write_tx(spi);
+ if (spi->tx_len == 0)
+ end = true;
+ }
+
+ if (sr & STM32F4_SPI_SR_RXNE) {
+ stm32f4_spi_read_rx(spi);
+ if (spi->rx_len == 0)
+ end = true;
+ else /* Load data for discontinuous mode */
+ stm32f4_spi_write_tx(spi);
+ }
+
+end_irq:
+ if (end) {
+ /* Immediately disable interrupts to do not generate new one */
+ stm32_spi_clr_bits(spi, STM32F4_SPI_CR2,
+ STM32F4_SPI_CR2_TXEIE |
+ STM32F4_SPI_CR2_RXNEIE |
+ STM32F4_SPI_CR2_ERRIE);
+ spin_unlock_irqrestore(&spi->lock, flags);
+ return IRQ_WAKE_THREAD;
+ }
+
+ spin_unlock_irqrestore(&spi->lock, flags);
+ return IRQ_HANDLED;
+}
+
+/**
+ * stm32f4_spi_irq_thread - Thread of interrupt handler for SPI controller
+ * @irq: interrupt line
+ * @dev_id: SPI controller master interface
+ */
+static irqreturn_t stm32f4_spi_irq_thread(int irq, void *dev_id)
+{
+ struct spi_master *master = dev_id;
+ struct stm32_spi *spi = spi_master_get_devdata(master);
+
+ spi_finalize_current_transfer(master);
+ stm32f4_spi_disable(spi);
- return (transfer->len > spi->fifo_size);
+ return IRQ_HANDLED;
}
/**
- * stm32_spi_irq - Interrupt handler for SPI controller events
+ * stm32h7_spi_irq_thread - Thread of interrupt handler for SPI controller
* @irq: interrupt line
* @dev_id: SPI controller master interface
*/
-static irqreturn_t stm32_spi_irq(int irq, void *dev_id)
+static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
{
struct spi_master *master = dev_id;
struct stm32_spi *spi = spi_master_get_devdata(master);
@@ -489,19 +897,19 @@ static irqreturn_t stm32_spi_irq(int irq, void *dev_id)
spin_lock_irqsave(&spi->lock, flags);
- sr = readl_relaxed(spi->base + STM32_SPI_SR);
- ier = readl_relaxed(spi->base + STM32_SPI_IER);
+ sr = readl_relaxed(spi->base + STM32H7_SPI_SR);
+ ier = readl_relaxed(spi->base + STM32H7_SPI_IER);
mask = ier;
/* EOTIE is triggered on EOT, SUSP and TXC events. */
- mask |= SPI_SR_SUSP;
+ mask |= STM32H7_SPI_SR_SUSP;
/*
* When TXTF is set, DXPIE and TXPIE are cleared. So in case of
* Full-Duplex, need to poll RXP event to know if there are remaining
* data, before disabling SPI.
*/
if (spi->rx_buf && !spi->cur_usedma)
- mask |= SPI_SR_RXP;
+ mask |= STM32H7_SPI_SR_RXP;
if (!(sr & mask)) {
dev_dbg(spi->dev, "spurious IT (sr=0x%08x, ier=0x%08x)\n",
@@ -510,10 +918,10 @@ static irqreturn_t stm32_spi_irq(int irq, void *dev_id)
return IRQ_NONE;
}
- if (sr & SPI_SR_SUSP) {
+ if (sr & STM32H7_SPI_SR_SUSP) {
dev_warn(spi->dev, "Communication suspended\n");
if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
- stm32_spi_read_rxfifo(spi, false);
+ stm32h7_spi_read_rxfifo(spi, false);
/*
* If communication is suspended while using DMA, it means
* that something went wrong, so stop the current transfer
@@ -522,15 +930,15 @@ static irqreturn_t stm32_spi_irq(int irq, void *dev_id)
end = true;
}
- if (sr & SPI_SR_MODF) {
+ if (sr & STM32H7_SPI_SR_MODF) {
dev_warn(spi->dev, "Mode fault: transfer aborted\n");
end = true;
}
- if (sr & SPI_SR_OVR) {
+ if (sr & STM32H7_SPI_SR_OVR) {
dev_warn(spi->dev, "Overrun: received value discarded\n");
if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
- stm32_spi_read_rxfifo(spi, false);
+ stm32h7_spi_read_rxfifo(spi, false);
/*
* If overrun is detected while using DMA, it means that
* something went wrong, so stop the current transfer
@@ -539,27 +947,27 @@ static irqreturn_t stm32_spi_irq(int irq, void *dev_id)
end = true;
}
- if (sr & SPI_SR_EOT) {
+ if (sr & STM32H7_SPI_SR_EOT) {
if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
- stm32_spi_read_rxfifo(spi, true);
+ stm32h7_spi_read_rxfifo(spi, true);
end = true;
}
- if (sr & SPI_SR_TXP)
+ if (sr & STM32H7_SPI_SR_TXP)
if (!spi->cur_usedma && (spi->tx_buf && (spi->tx_len > 0)))
- stm32_spi_write_txfifo(spi);
+ stm32h7_spi_write_txfifo(spi);
- if (sr & SPI_SR_RXP)
+ if (sr & STM32H7_SPI_SR_RXP)
if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0)))
- stm32_spi_read_rxfifo(spi, false);
+ stm32h7_spi_read_rxfifo(spi, false);
- writel_relaxed(mask, spi->base + STM32_SPI_IFCR);
+ writel_relaxed(mask, spi->base + STM32H7_SPI_IFCR);
spin_unlock_irqrestore(&spi->lock, flags);
if (end) {
spi_finalize_current_transfer(master);
- stm32_spi_disable(spi);
+ stm32h7_spi_disable(spi);
}
return IRQ_HANDLED;
@@ -598,7 +1006,7 @@ static int stm32_spi_prepare_msg(struct spi_master *master,
struct spi_device *spi_dev = msg->spi;
struct device_node *np = spi_dev->dev.of_node;
unsigned long flags;
- u32 cfg2_clrb = 0, cfg2_setb = 0;
+ u32 clrb = 0, setb = 0;
/* SPI slave device may need time between data frames */
spi->cur_midi = 0;
@@ -606,19 +1014,19 @@ static int stm32_spi_prepare_msg(struct spi_master *master,
dev_dbg(spi->dev, "%dns inter-data idleness\n", spi->cur_midi);
if (spi_dev->mode & SPI_CPOL)
- cfg2_setb |= SPI_CFG2_CPOL;
+ setb |= spi->cfg->regs->cpol.mask;
else
- cfg2_clrb |= SPI_CFG2_CPOL;
+ clrb |= spi->cfg->regs->cpol.mask;
if (spi_dev->mode & SPI_CPHA)
- cfg2_setb |= SPI_CFG2_CPHA;
+ setb |= spi->cfg->regs->cpha.mask;
else
- cfg2_clrb |= SPI_CFG2_CPHA;
+ clrb |= spi->cfg->regs->cpha.mask;
if (spi_dev->mode & SPI_LSB_FIRST)
- cfg2_setb |= SPI_CFG2_LSBFRST;
+ setb |= spi->cfg->regs->lsb_first.mask;
else
- cfg2_clrb |= SPI_CFG2_LSBFRST;
+ clrb |= spi->cfg->regs->lsb_first.mask;
dev_dbg(spi->dev, "cpol=%d cpha=%d lsb_first=%d cs_high=%d\n",
spi_dev->mode & SPI_CPOL,
@@ -628,11 +1036,12 @@ static int stm32_spi_prepare_msg(struct spi_master *master,
spin_lock_irqsave(&spi->lock, flags);
- if (cfg2_clrb || cfg2_setb)
+ /* CPOL, CPHA and LSB FIRST bits have common register */
+ if (clrb || setb)
writel_relaxed(
- (readl_relaxed(spi->base + STM32_SPI_CFG2) &
- ~cfg2_clrb) | cfg2_setb,
- spi->base + STM32_SPI_CFG2);
+ (readl_relaxed(spi->base + spi->cfg->regs->cpol.reg) &
+ ~clrb) | setb,
+ spi->base + spi->cfg->regs->cpol.reg);
spin_unlock_irqrestore(&spi->lock, flags);
@@ -640,12 +1049,40 @@ static int stm32_spi_prepare_msg(struct spi_master *master,
}
/**
- * stm32_spi_dma_cb - dma callback
+ * stm32f4_spi_dma_tx_cb - dma callback
+ *
+ * DMA callback is called when the transfer is complete for DMA TX channel.
+ */
+static void stm32f4_spi_dma_tx_cb(void *data)
+{
+ struct stm32_spi *spi = data;
+
+ if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX) {
+ spi_finalize_current_transfer(spi->master);
+ stm32f4_spi_disable(spi);
+ }
+}
+
+/**
+ * stm32f4_spi_dma_rx_cb - dma callback
+ *
+ * DMA callback is called when the transfer is complete for DMA RX channel.
+ */
+static void stm32f4_spi_dma_rx_cb(void *data)
+{
+ struct stm32_spi *spi = data;
+
+ spi_finalize_current_transfer(spi->master);
+ stm32f4_spi_disable(spi);
+}
+
+/**
+ * stm32h7_spi_dma_cb - dma callback
*
* DMA callback is called when the transfer is complete or when an error
* occurs. If the transfer is complete, EOT flag is raised.
*/
-static void stm32_spi_dma_cb(void *data)
+static void stm32h7_spi_dma_cb(void *data)
{
struct stm32_spi *spi = data;
unsigned long flags;
@@ -653,11 +1090,11 @@ static void stm32_spi_dma_cb(void *data)
spin_lock_irqsave(&spi->lock, flags);
- sr = readl_relaxed(spi->base + STM32_SPI_SR);
+ sr = readl_relaxed(spi->base + STM32H7_SPI_SR);
spin_unlock_irqrestore(&spi->lock, flags);
- if (!(sr & SPI_SR_EOT))
+ if (!(sr & STM32H7_SPI_SR_EOT))
dev_warn(spi->dev, "DMA error (sr=0x%08x)\n", sr);
/* Now wait for EOT, or SUSP or OVR in case of error */
@@ -681,23 +1118,27 @@ static void stm32_spi_dma_config(struct stm32_spi *spi,
else
buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
- /* Valid for DMA Half or Full Fifo threshold */
- if (spi->cur_fthlv == 2)
+ if (spi->cfg->has_fifo) {
+ /* Valid for DMA Half or Full Fifo threshold */
+ if (spi->cur_fthlv == 2)
+ maxburst = 1;
+ else
+ maxburst = spi->cur_fthlv;
+ } else {
maxburst = 1;
- else
- maxburst = spi->cur_fthlv;
+ }
memset(dma_conf, 0, sizeof(struct dma_slave_config));
dma_conf->direction = dir;
if (dma_conf->direction == DMA_DEV_TO_MEM) { /* RX */
- dma_conf->src_addr = spi->phys_addr + STM32_SPI_RXDR;
+ dma_conf->src_addr = spi->phys_addr + spi->cfg->regs->rx.reg;
dma_conf->src_addr_width = buswidth;
dma_conf->src_maxburst = maxburst;
dev_dbg(spi->dev, "Rx DMA config buswidth=%d, maxburst=%d\n",
buswidth, maxburst);
} else if (dma_conf->direction == DMA_MEM_TO_DEV) { /* TX */
- dma_conf->dst_addr = spi->phys_addr + STM32_SPI_TXDR;
+ dma_conf->dst_addr = spi->phys_addr + spi->cfg->regs->tx.reg;
dma_conf->dst_addr_width = buswidth;
dma_conf->dst_maxburst = maxburst;
@@ -707,27 +1148,68 @@ static void stm32_spi_dma_config(struct stm32_spi *spi,
}
/**
- * stm32_spi_transfer_one_irq - transfer a single spi_transfer using
- * interrupts
+ * stm32f4_spi_transfer_one_irq - transfer a single spi_transfer using
+ * interrupts
*
* It must returns 0 if the transfer is finished or 1 if the transfer is still
* in progress.
*/
-static int stm32_spi_transfer_one_irq(struct stm32_spi *spi)
+static int stm32f4_spi_transfer_one_irq(struct stm32_spi *spi)
+{
+ unsigned long flags;
+ u32 cr2 = 0;
+
+ /* Enable the interrupts relative to the current communication mode */
+ if (spi->cur_comm == SPI_SIMPLEX_TX || spi->cur_comm == SPI_3WIRE_TX) {
+ cr2 |= STM32F4_SPI_CR2_TXEIE;
+ } else if (spi->cur_comm == SPI_FULL_DUPLEX) {
+ /* In transmit-only mode, the OVR flag is set in the SR register
+ * since the received data are never read. Therefore set OVR
+ * interrupt only when rx buffer is available.
+ */
+ cr2 |= STM32F4_SPI_CR2_RXNEIE | STM32F4_SPI_CR2_ERRIE;
+ } else {
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&spi->lock, flags);
+
+ stm32_spi_set_bits(spi, STM32F4_SPI_CR2, cr2);
+
+ stm32_spi_enable(spi);
+
+ /* starting data transfer when buffer is loaded */
+ if (spi->tx_buf)
+ stm32f4_spi_write_tx(spi);
+
+ spin_unlock_irqrestore(&spi->lock, flags);
+
+ return 1;
+}
+
+/**
+ * stm32h7_spi_transfer_one_irq - transfer a single spi_transfer using
+ * interrupts
+ *
+ * It must returns 0 if the transfer is finished or 1 if the transfer is still
+ * in progress.
+ */
+static int stm32h7_spi_transfer_one_irq(struct stm32_spi *spi)
{
unsigned long flags;
u32 ier = 0;
/* Enable the interrupts relative to the current communication mode */
if (spi->tx_buf && spi->rx_buf) /* Full Duplex */
- ier |= SPI_IER_DXPIE;
+ ier |= STM32H7_SPI_IER_DXPIE;
else if (spi->tx_buf) /* Half-Duplex TX dir or Simplex TX */
- ier |= SPI_IER_TXPIE;
+ ier |= STM32H7_SPI_IER_TXPIE;
else if (spi->rx_buf) /* Half-Duplex RX dir or Simplex RX */
- ier |= SPI_IER_RXPIE;
+ ier |= STM32H7_SPI_IER_RXPIE;
/* Enable the interrupts relative to the end of transfer */
- ier |= SPI_IER_EOTIE | SPI_IER_TXTFIE | SPI_IER_OVRIE | SPI_IER_MODFIE;
+ ier |= STM32H7_SPI_IER_EOTIE | STM32H7_SPI_IER_TXTFIE |
+ STM32H7_SPI_IER_OVRIE | STM32H7_SPI_IER_MODFIE;
spin_lock_irqsave(&spi->lock, flags);
@@ -735,11 +1217,11 @@ static int stm32_spi_transfer_one_irq(struct stm32_spi *spi)
/* Be sure to have data in fifo before starting data transfer */
if (spi->tx_buf)
- stm32_spi_write_txfifo(spi);
+ stm32h7_spi_write_txfifo(spi);
- stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_CSTART);
+ stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART);
- writel_relaxed(ier, spi->base + STM32_SPI_IER);
+ writel_relaxed(ier, spi->base + STM32H7_SPI_IER);
spin_unlock_irqrestore(&spi->lock, flags);
@@ -747,6 +1229,43 @@ static int stm32_spi_transfer_one_irq(struct stm32_spi *spi)
}
/**
+ * stm32f4_spi_transfer_one_dma_start - Set SPI driver registers to start
+ * transfer using DMA
+ */
+static void stm32f4_spi_transfer_one_dma_start(struct stm32_spi *spi)
+{
+ /* In DMA mode end of transfer is handled by DMA TX or RX callback. */
+ if (spi->cur_comm == SPI_SIMPLEX_RX || spi->cur_comm == SPI_3WIRE_RX ||
+ spi->cur_comm == SPI_FULL_DUPLEX) {
+ /*
+ * In transmit-only mode, the OVR flag is set in the SR register
+ * since the received data are never read. Therefore set OVR
+ * interrupt only when rx buffer is available.
+ */
+ stm32_spi_set_bits(spi, STM32F4_SPI_CR2, STM32F4_SPI_CR2_ERRIE);
+ }
+
+ stm32_spi_enable(spi);
+}
+
+/**
+ * stm32h7_spi_transfer_one_dma_start - Set SPI driver registers to start
+ * transfer using DMA
+ */
+static void stm32h7_spi_transfer_one_dma_start(struct stm32_spi *spi)
+{
+ /* Enable the interrupts relative to the end of transfer */
+ stm32_spi_set_bits(spi, STM32H7_SPI_IER, STM32H7_SPI_IER_EOTIE |
+ STM32H7_SPI_IER_TXTFIE |
+ STM32H7_SPI_IER_OVRIE |
+ STM32H7_SPI_IER_MODFIE);
+
+ stm32_spi_enable(spi);
+
+ stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_CSTART);
+}
+
+/**
* stm32_spi_transfer_one_dma - transfer a single spi_transfer using DMA
*
* It must returns 0 if the transfer is finished or 1 if the transfer is still
@@ -758,17 +1277,17 @@ static int stm32_spi_transfer_one_dma(struct stm32_spi *spi,
struct dma_slave_config tx_dma_conf, rx_dma_conf;
struct dma_async_tx_descriptor *tx_dma_desc, *rx_dma_desc;
unsigned long flags;
- u32 ier = 0;
spin_lock_irqsave(&spi->lock, flags);
rx_dma_desc = NULL;
- if (spi->rx_buf) {
+ if (spi->rx_buf && spi->dma_rx) {
stm32_spi_dma_config(spi, &rx_dma_conf, DMA_DEV_TO_MEM);
dmaengine_slave_config(spi->dma_rx, &rx_dma_conf);
/* Enable Rx DMA request */
- stm32_spi_set_bits(spi, STM32_SPI_CFG1, SPI_CFG1_RXDMAEN);
+ stm32_spi_set_bits(spi, spi->cfg->regs->dma_rx_en.reg,
+ spi->cfg->regs->dma_rx_en.mask);
rx_dma_desc = dmaengine_prep_slave_sg(
spi->dma_rx, xfer->rx_sg.sgl,
@@ -778,7 +1297,7 @@ static int stm32_spi_transfer_one_dma(struct stm32_spi *spi,
}
tx_dma_desc = NULL;
- if (spi->tx_buf) {
+ if (spi->tx_buf && spi->dma_tx) {
stm32_spi_dma_config(spi, &tx_dma_conf, DMA_MEM_TO_DEV);
dmaengine_slave_config(spi->dma_tx, &tx_dma_conf);
@@ -789,12 +1308,15 @@ static int stm32_spi_transfer_one_dma(struct stm32_spi *spi,
DMA_PREP_INTERRUPT);
}
- if ((spi->tx_buf && !tx_dma_desc) ||
- (spi->rx_buf && !rx_dma_desc))
+ if ((spi->tx_buf && spi->dma_tx && !tx_dma_desc) ||
+ (spi->rx_buf && spi->dma_rx && !rx_dma_desc))
+ goto dma_desc_error;
+
+ if (spi->cur_comm == SPI_FULL_DUPLEX && (!tx_dma_desc || !rx_dma_desc))
goto dma_desc_error;
if (rx_dma_desc) {
- rx_dma_desc->callback = stm32_spi_dma_cb;
+ rx_dma_desc->callback = spi->cfg->dma_rx_cb;
rx_dma_desc->callback_param = spi;
if (dma_submit_error(dmaengine_submit(rx_dma_desc))) {
@@ -806,8 +1328,9 @@ static int stm32_spi_transfer_one_dma(struct stm32_spi *spi,
}
if (tx_dma_desc) {
- if (spi->cur_comm == SPI_SIMPLEX_TX) {
- tx_dma_desc->callback = stm32_spi_dma_cb;
+ if (spi->cur_comm == SPI_SIMPLEX_TX ||
+ spi->cur_comm == SPI_3WIRE_TX) {
+ tx_dma_desc->callback = spi->cfg->dma_tx_cb;
tx_dma_desc->callback_param = spi;
}
@@ -819,130 +1342,278 @@ static int stm32_spi_transfer_one_dma(struct stm32_spi *spi,
dma_async_issue_pending(spi->dma_tx);
/* Enable Tx DMA request */
- stm32_spi_set_bits(spi, STM32_SPI_CFG1, SPI_CFG1_TXDMAEN);
+ stm32_spi_set_bits(spi, spi->cfg->regs->dma_tx_en.reg,
+ spi->cfg->regs->dma_tx_en.mask);
}
- /* Enable the interrupts relative to the end of transfer */
- ier |= SPI_IER_EOTIE | SPI_IER_TXTFIE | SPI_IER_OVRIE | SPI_IER_MODFIE;
- writel_relaxed(ier, spi->base + STM32_SPI_IER);
-
- stm32_spi_enable(spi);
-
- stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_CSTART);
+ spi->cfg->transfer_one_dma_start(spi);
spin_unlock_irqrestore(&spi->lock, flags);
return 1;
dma_submit_error:
- if (spi->rx_buf)
+ if (spi->dma_rx)
dmaengine_terminate_all(spi->dma_rx);
dma_desc_error:
- stm32_spi_clr_bits(spi, STM32_SPI_CFG1, SPI_CFG1_RXDMAEN);
+ stm32_spi_clr_bits(spi, spi->cfg->regs->dma_rx_en.reg,
+ spi->cfg->regs->dma_rx_en.mask);
spin_unlock_irqrestore(&spi->lock, flags);
dev_info(spi->dev, "DMA issue: fall back to irq transfer\n");
- return stm32_spi_transfer_one_irq(spi);
+ spi->cur_usedma = false;
+ return spi->cfg->transfer_one_irq(spi);
}
/**
- * stm32_spi_transfer_one_setup - common setup to transfer a single
- * spi_transfer either using DMA or
- * interrupts.
+ * stm32f4_spi_set_bpw - Configure bits per word
+ * @spi: pointer to the spi controller data structure
*/
-static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
- struct spi_device *spi_dev,
- struct spi_transfer *transfer)
+static void stm32f4_spi_set_bpw(struct stm32_spi *spi)
{
- unsigned long flags;
- u32 cfg1_clrb = 0, cfg1_setb = 0, cfg2_clrb = 0, cfg2_setb = 0;
- u32 mode, nb_words;
- int ret = 0;
-
- spin_lock_irqsave(&spi->lock, flags);
+ if (spi->cur_bpw == 16)
+ stm32_spi_set_bits(spi, STM32F4_SPI_CR1, STM32F4_SPI_CR1_DFF);
+ else
+ stm32_spi_clr_bits(spi, STM32F4_SPI_CR1, STM32F4_SPI_CR1_DFF);
+}
- if (spi->cur_bpw != transfer->bits_per_word) {
- u32 bpw, fthlv;
+/**
+ * stm32h7_spi_set_bpw - configure bits per word
+ * @spi: pointer to the spi controller data structure
+ */
+static void stm32h7_spi_set_bpw(struct stm32_spi *spi)
+{
+ u32 bpw, fthlv;
+ u32 cfg1_clrb = 0, cfg1_setb = 0;
- spi->cur_bpw = transfer->bits_per_word;
- bpw = spi->cur_bpw - 1;
+ bpw = spi->cur_bpw - 1;
- cfg1_clrb |= SPI_CFG1_DSIZE;
- cfg1_setb |= (bpw << SPI_CFG1_DSIZE_SHIFT) & SPI_CFG1_DSIZE;
+ cfg1_clrb |= STM32H7_SPI_CFG1_DSIZE;
+ cfg1_setb |= (bpw << STM32H7_SPI_CFG1_DSIZE_SHIFT) &
+ STM32H7_SPI_CFG1_DSIZE;
- spi->cur_fthlv = stm32_spi_prepare_fthlv(spi);
- fthlv = spi->cur_fthlv - 1;
+ spi->cur_fthlv = stm32h7_spi_prepare_fthlv(spi);
+ fthlv = spi->cur_fthlv - 1;
- cfg1_clrb |= SPI_CFG1_FTHLV;
- cfg1_setb |= (fthlv << SPI_CFG1_FTHLV_SHIFT) & SPI_CFG1_FTHLV;
- }
+ cfg1_clrb |= STM32H7_SPI_CFG1_FTHLV;
+ cfg1_setb |= (fthlv << STM32H7_SPI_CFG1_FTHLV_SHIFT) &
+ STM32H7_SPI_CFG1_FTHLV;
- if (spi->cur_speed != transfer->speed_hz) {
- int mbr;
+ writel_relaxed(
+ (readl_relaxed(spi->base + STM32H7_SPI_CFG1) &
+ ~cfg1_clrb) | cfg1_setb,
+ spi->base + STM32H7_SPI_CFG1);
+}
- /* Update spi->cur_speed with real clock speed */
- mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz);
- if (mbr < 0) {
- ret = mbr;
- goto out;
- }
+/**
+ * stm32_spi_set_mbr - Configure baud rate divisor in master mode
+ * @spi: pointer to the spi controller data structure
+ * @mbrdiv: baud rate divisor value
+ */
+static void stm32_spi_set_mbr(struct stm32_spi *spi, u32 mbrdiv)
+{
+ u32 clrb = 0, setb = 0;
- transfer->speed_hz = spi->cur_speed;
+ clrb |= spi->cfg->regs->br.mask;
+ setb |= ((u32)mbrdiv << spi->cfg->regs->br.shift) &
+ spi->cfg->regs->br.mask;
- cfg1_clrb |= SPI_CFG1_MBR;
- cfg1_setb |= ((u32)mbr << SPI_CFG1_MBR_SHIFT) & SPI_CFG1_MBR;
- }
+ writel_relaxed((readl_relaxed(spi->base + spi->cfg->regs->br.reg) &
+ ~clrb) | setb,
+ spi->base + spi->cfg->regs->br.reg);
+}
- if (cfg1_clrb || cfg1_setb)
- writel_relaxed((readl_relaxed(spi->base + STM32_SPI_CFG1) &
- ~cfg1_clrb) | cfg1_setb,
- spi->base + STM32_SPI_CFG1);
+/**
+ * stm32_spi_communication_type - return transfer communication type
+ * @spi_dev: pointer to the spi device
+ * transfer: pointer to spi transfer
+ */
+static unsigned int stm32_spi_communication_type(struct spi_device *spi_dev,
+ struct spi_transfer *transfer)
+{
+ unsigned int type = SPI_FULL_DUPLEX;
- mode = SPI_FULL_DUPLEX;
if (spi_dev->mode & SPI_3WIRE) { /* MISO/MOSI signals shared */
/*
* SPI_3WIRE and xfer->tx_buf != NULL and xfer->rx_buf != NULL
- * is forbidden und unvalidated by SPI subsystem so depending
+ * is forbidden and unvalidated by SPI subsystem so depending
* on the valid buffer, we can determine the direction of the
* transfer.
*/
- mode = SPI_HALF_DUPLEX;
if (!transfer->tx_buf)
- stm32_spi_clr_bits(spi, STM32_SPI_CR1, SPI_CR1_HDDIR);
- else if (!transfer->rx_buf)
- stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_HDDIR);
+ type = SPI_3WIRE_RX;
+ else
+ type = SPI_3WIRE_TX;
} else {
if (!transfer->tx_buf)
- mode = SPI_SIMPLEX_RX;
+ type = SPI_SIMPLEX_RX;
else if (!transfer->rx_buf)
- mode = SPI_SIMPLEX_TX;
+ type = SPI_SIMPLEX_TX;
+ }
+
+ return type;
+}
+
+/**
+ * stm32f4_spi_set_mode - configure communication mode
+ * @spi: pointer to the spi controller data structure
+ * @comm_type: type of communication to configure
+ */
+static int stm32f4_spi_set_mode(struct stm32_spi *spi, unsigned int comm_type)
+{
+ if (comm_type == SPI_3WIRE_TX || comm_type == SPI_SIMPLEX_TX) {
+ stm32_spi_set_bits(spi, STM32F4_SPI_CR1,
+ STM32F4_SPI_CR1_BIDIMODE |
+ STM32F4_SPI_CR1_BIDIOE);
+ } else if (comm_type == SPI_FULL_DUPLEX) {
+ stm32_spi_clr_bits(spi, STM32F4_SPI_CR1,
+ STM32F4_SPI_CR1_BIDIMODE |
+ STM32F4_SPI_CR1_BIDIOE);
+ } else {
+ return -EINVAL;
}
- if (spi->cur_comm != mode) {
- spi->cur_comm = mode;
- cfg2_clrb |= SPI_CFG2_COMM;
- cfg2_setb |= (mode << SPI_CFG2_COMM_SHIFT) & SPI_CFG2_COMM;
+ return 0;
+}
+
+/**
+ * stm32h7_spi_set_mode - configure communication mode
+ * @spi: pointer to the spi controller data structure
+ * @comm_type: type of communication to configure
+ */
+static int stm32h7_spi_set_mode(struct stm32_spi *spi, unsigned int comm_type)
+{
+ u32 mode;
+ u32 cfg2_clrb = 0, cfg2_setb = 0;
+
+ if (comm_type == SPI_3WIRE_RX) {
+ mode = STM32H7_SPI_HALF_DUPLEX;
+ stm32_spi_clr_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_HDDIR);
+ } else if (comm_type == SPI_3WIRE_TX) {
+ mode = STM32H7_SPI_HALF_DUPLEX;
+ stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_HDDIR);
+ } else if (comm_type == SPI_SIMPLEX_RX) {
+ mode = STM32H7_SPI_SIMPLEX_RX;
+ } else if (comm_type == SPI_SIMPLEX_TX) {
+ mode = STM32H7_SPI_SIMPLEX_TX;
+ } else {
+ mode = STM32H7_SPI_FULL_DUPLEX;
}
- cfg2_clrb |= SPI_CFG2_MIDI;
- if ((transfer->len > 1) && (spi->cur_midi > 0)) {
+ cfg2_clrb |= STM32H7_SPI_CFG2_COMM;
+ cfg2_setb |= (mode << STM32H7_SPI_CFG2_COMM_SHIFT) &
+ STM32H7_SPI_CFG2_COMM;
+
+ writel_relaxed(
+ (readl_relaxed(spi->base + STM32H7_SPI_CFG2) &
+ ~cfg2_clrb) | cfg2_setb,
+ spi->base + STM32H7_SPI_CFG2);
+
+ return 0;
+}
+
+/**
+ * stm32h7_spi_data_idleness - configure minimum time delay inserted between two
+ * consecutive data frames in master mode
+ * @spi: pointer to the spi controller data structure
+ * @len: transfer len
+ */
+static void stm32h7_spi_data_idleness(struct stm32_spi *spi, u32 len)
+{
+ u32 cfg2_clrb = 0, cfg2_setb = 0;
+
+ cfg2_clrb |= STM32H7_SPI_CFG2_MIDI;
+ if ((len > 1) && (spi->cur_midi > 0)) {
u32 sck_period_ns = DIV_ROUND_UP(SPI_1HZ_NS, spi->cur_speed);
u32 midi = min((u32)DIV_ROUND_UP(spi->cur_midi, sck_period_ns),
- (u32)SPI_CFG2_MIDI >> SPI_CFG2_MIDI_SHIFT);
+ (u32)STM32H7_SPI_CFG2_MIDI >>
+ STM32H7_SPI_CFG2_MIDI_SHIFT);
dev_dbg(spi->dev, "period=%dns, midi=%d(=%dns)\n",
sck_period_ns, midi, midi * sck_period_ns);
+ cfg2_setb |= (midi << STM32H7_SPI_CFG2_MIDI_SHIFT) &
+ STM32H7_SPI_CFG2_MIDI;
+ }
+
+ writel_relaxed((readl_relaxed(spi->base + STM32H7_SPI_CFG2) &
+ ~cfg2_clrb) | cfg2_setb,
+ spi->base + STM32H7_SPI_CFG2);
+}
+
+/**
+ * stm32h7_spi_number_of_data - configure number of data at current transfer
+ * @spi: pointer to the spi controller data structure
+ * @len: transfer length
+ */
+static int stm32h7_spi_number_of_data(struct stm32_spi *spi, u32 nb_words)
+{
+ u32 cr2_clrb = 0, cr2_setb = 0;
+
+ if (nb_words <= (STM32H7_SPI_CR2_TSIZE >>
+ STM32H7_SPI_CR2_TSIZE_SHIFT)) {
+ cr2_clrb |= STM32H7_SPI_CR2_TSIZE;
+ cr2_setb = nb_words << STM32H7_SPI_CR2_TSIZE_SHIFT;
+ writel_relaxed((readl_relaxed(spi->base + STM32H7_SPI_CR2) &
+ ~cr2_clrb) | cr2_setb,
+ spi->base + STM32H7_SPI_CR2);
+ } else {
+ return -EMSGSIZE;
+ }
+
+ return 0;
+}
+
+/**
+ * stm32_spi_transfer_one_setup - common setup to transfer a single
+ * spi_transfer either using DMA or
+ * interrupts.
+ */
+static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
+ struct spi_device *spi_dev,
+ struct spi_transfer *transfer)
+{
+ unsigned long flags;
+ unsigned int comm_type;
+ int nb_words, ret = 0;
+
+ spin_lock_irqsave(&spi->lock, flags);
+
+ if (spi->cur_bpw != transfer->bits_per_word) {
+ spi->cur_bpw = transfer->bits_per_word;
+ spi->cfg->set_bpw(spi);
+ }
- cfg2_setb |= (midi << SPI_CFG2_MIDI_SHIFT) & SPI_CFG2_MIDI;
+ if (spi->cur_speed != transfer->speed_hz) {
+ int mbr;
+
+ /* Update spi->cur_speed with real clock speed */
+ mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz,
+ spi->cfg->baud_rate_div_min,
+ spi->cfg->baud_rate_div_max);
+ if (mbr < 0) {
+ ret = mbr;
+ goto out;
+ }
+
+ transfer->speed_hz = spi->cur_speed;
+ stm32_spi_set_mbr(spi, mbr);
}
- if (cfg2_clrb || cfg2_setb)
- writel_relaxed((readl_relaxed(spi->base + STM32_SPI_CFG2) &
- ~cfg2_clrb) | cfg2_setb,
- spi->base + STM32_SPI_CFG2);
+ comm_type = stm32_spi_communication_type(spi_dev, transfer);
+ if (spi->cur_comm != comm_type) {
+ ret = spi->cfg->set_mode(spi, comm_type);
+
+ if (ret < 0)
+ goto out;
+
+ spi->cur_comm = comm_type;
+ }
+
+ if (spi->cfg->set_data_idleness)
+ spi->cfg->set_data_idleness(spi, transfer->len);
if (spi->cur_bpw <= 8)
nb_words = transfer->len;
@@ -950,13 +1621,11 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
nb_words = DIV_ROUND_UP(transfer->len * 8, 16);
else
nb_words = DIV_ROUND_UP(transfer->len * 8, 32);
- nb_words <<= SPI_CR2_TSIZE_SHIFT;
- if (nb_words <= SPI_CR2_TSIZE) {
- writel_relaxed(nb_words, spi->base + STM32_SPI_CR2);
- } else {
- ret = -EMSGSIZE;
- goto out;
+ if (spi->cfg->set_number_of_data) {
+ ret = spi->cfg->set_number_of_data(spi, nb_words);
+ if (ret < 0)
+ goto out;
}
spi->cur_xferlen = transfer->len;
@@ -997,7 +1666,7 @@ static int stm32_spi_transfer_one(struct spi_master *master,
spi->rx_len = spi->rx_buf ? transfer->len : 0;
spi->cur_usedma = (master->can_dma &&
- stm32_spi_can_dma(master, spi_dev, transfer));
+ master->can_dma(master, spi_dev, transfer));
ret = stm32_spi_transfer_one_setup(spi, spi_dev, transfer);
if (ret) {
@@ -1008,47 +1677,73 @@ static int stm32_spi_transfer_one(struct spi_master *master,
if (spi->cur_usedma)
return stm32_spi_transfer_one_dma(spi, transfer);
else
- return stm32_spi_transfer_one_irq(spi);
+ return spi->cfg->transfer_one_irq(spi);
}
/**
* stm32_spi_unprepare_msg - relax the hardware
- *
- * Normally, if TSIZE has been configured, we should relax the hardware at the
- * reception of the EOT interrupt. But in case of error, EOT will not be
- * raised. So the subsystem unprepare_message call allows us to properly
- * complete the transfer from an hardware point of view.
*/
static int stm32_spi_unprepare_msg(struct spi_master *master,
struct spi_message *msg)
{
struct stm32_spi *spi = spi_master_get_devdata(master);
- stm32_spi_disable(spi);
+ spi->cfg->disable(spi);
+
+ return 0;
+}
+
+/**
+ * stm32f4_spi_config - Configure SPI controller as SPI master
+ */
+static int stm32f4_spi_config(struct stm32_spi *spi)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&spi->lock, flags);
+
+ /* Ensure I2SMOD bit is kept cleared */
+ stm32_spi_clr_bits(spi, STM32F4_SPI_I2SCFGR,
+ STM32F4_SPI_I2SCFGR_I2SMOD);
+
+ /*
+ * - SS input value high
+ * - transmitter half duplex direction
+ * - Set the master mode (default Motorola mode)
+ * - Consider 1 master/n slaves configuration and
+ * SS input value is determined by the SSI bit
+ */
+ stm32_spi_set_bits(spi, STM32F4_SPI_CR1, STM32F4_SPI_CR1_SSI |
+ STM32F4_SPI_CR1_BIDIOE |
+ STM32F4_SPI_CR1_MSTR |
+ STM32F4_SPI_CR1_SSM);
+
+ spin_unlock_irqrestore(&spi->lock, flags);
return 0;
}
/**
- * stm32_spi_config - Configure SPI controller as SPI master
+ * stm32h7_spi_config - Configure SPI controller as SPI master
*/
-static int stm32_spi_config(struct stm32_spi *spi)
+static int stm32h7_spi_config(struct stm32_spi *spi)
{
unsigned long flags;
spin_lock_irqsave(&spi->lock, flags);
/* Ensure I2SMOD bit is kept cleared */
- stm32_spi_clr_bits(spi, STM32_SPI_I2SCFGR, SPI_I2SCFGR_I2SMOD);
+ stm32_spi_clr_bits(spi, STM32H7_SPI_I2SCFGR,
+ STM32H7_SPI_I2SCFGR_I2SMOD);
/*
* - SS input value high
* - transmitter half duplex direction
* - automatic communication suspend when RX-Fifo is full
*/
- stm32_spi_set_bits(spi, STM32_SPI_CR1, SPI_CR1_SSI |
- SPI_CR1_HDDIR |
- SPI_CR1_MASRX);
+ stm32_spi_set_bits(spi, STM32H7_SPI_CR1, STM32H7_SPI_CR1_SSI |
+ STM32H7_SPI_CR1_HDDIR |
+ STM32H7_SPI_CR1_MASRX);
/*
* - Set the master mode (default Motorola mode)
@@ -1056,17 +1751,56 @@ static int stm32_spi_config(struct stm32_spi *spi)
* SS input value is determined by the SSI bit
* - keep control of all associated GPIOs
*/
- stm32_spi_set_bits(spi, STM32_SPI_CFG2, SPI_CFG2_MASTER |
- SPI_CFG2_SSM |
- SPI_CFG2_AFCNTR);
+ stm32_spi_set_bits(spi, STM32H7_SPI_CFG2, STM32H7_SPI_CFG2_MASTER |
+ STM32H7_SPI_CFG2_SSM |
+ STM32H7_SPI_CFG2_AFCNTR);
spin_unlock_irqrestore(&spi->lock, flags);
return 0;
}
+static const struct stm32_spi_cfg stm32f4_spi_cfg = {
+ .regs = &stm32f4_spi_regspec,
+ .get_bpw_mask = stm32f4_spi_get_bpw_mask,
+ .disable = stm32f4_spi_disable,
+ .config = stm32f4_spi_config,
+ .set_bpw = stm32f4_spi_set_bpw,
+ .set_mode = stm32f4_spi_set_mode,
+ .transfer_one_dma_start = stm32f4_spi_transfer_one_dma_start,
+ .dma_tx_cb = stm32f4_spi_dma_tx_cb,
+ .dma_rx_cb = stm32f4_spi_dma_rx_cb,
+ .transfer_one_irq = stm32f4_spi_transfer_one_irq,
+ .irq_handler_event = stm32f4_spi_irq_event,
+ .irq_handler_thread = stm32f4_spi_irq_thread,
+ .baud_rate_div_min = STM32F4_SPI_BR_DIV_MIN,
+ .baud_rate_div_max = STM32F4_SPI_BR_DIV_MAX,
+ .has_fifo = false,
+};
+
+static const struct stm32_spi_cfg stm32h7_spi_cfg = {
+ .regs = &stm32h7_spi_regspec,
+ .get_fifo_size = stm32h7_spi_get_fifo_size,
+ .get_bpw_mask = stm32h7_spi_get_bpw_mask,
+ .disable = stm32h7_spi_disable,
+ .config = stm32h7_spi_config,
+ .set_bpw = stm32h7_spi_set_bpw,
+ .set_mode = stm32h7_spi_set_mode,
+ .set_data_idleness = stm32h7_spi_data_idleness,
+ .set_number_of_data = stm32h7_spi_number_of_data,
+ .transfer_one_dma_start = stm32h7_spi_transfer_one_dma_start,
+ .dma_rx_cb = stm32h7_spi_dma_cb,
+ .dma_tx_cb = stm32h7_spi_dma_cb,
+ .transfer_one_irq = stm32h7_spi_transfer_one_irq,
+ .irq_handler_thread = stm32h7_spi_irq_thread,
+ .baud_rate_div_min = STM32H7_SPI_MBR_DIV_MIN,
+ .baud_rate_div_max = STM32H7_SPI_MBR_DIV_MAX,
+ .has_fifo = true,
+};
+
static const struct of_device_id stm32_spi_of_match[] = {
- { .compatible = "st,stm32h7-spi", },
+ { .compatible = "st,stm32h7-spi", .data = (void *)&stm32h7_spi_cfg },
+ { .compatible = "st,stm32f4-spi", .data = (void *)&stm32f4_spi_cfg },
{},
};
MODULE_DEVICE_TABLE(of, stm32_spi_of_match);
@@ -1090,12 +1824,17 @@ static int stm32_spi_probe(struct platform_device *pdev)
spi->master = master;
spin_lock_init(&spi->lock);
+ spi->cfg = (const struct stm32_spi_cfg *)
+ of_match_device(pdev->dev.driver->of_match_table,
+ &pdev->dev)->data;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
spi->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(spi->base)) {
ret = PTR_ERR(spi->base);
goto err_master_put;
}
+
spi->phys_addr = (dma_addr_t)res->start;
spi->irq = platform_get_irq(pdev, 0);
@@ -1104,16 +1843,17 @@ static int stm32_spi_probe(struct platform_device *pdev)
ret = -ENOENT;
goto err_master_put;
}
- ret = devm_request_threaded_irq(&pdev->dev, spi->irq, NULL,
- stm32_spi_irq, IRQF_ONESHOT,
- pdev->name, master);
+ ret = devm_request_threaded_irq(&pdev->dev, spi->irq,
+ spi->cfg->irq_handler_event,
+ spi->cfg->irq_handler_thread,
+ IRQF_ONESHOT, pdev->name, master);
if (ret) {
dev_err(&pdev->dev, "irq%d request failed: %d\n", spi->irq,
ret);
goto err_master_put;
}
- spi->clk = devm_clk_get(&pdev->dev, 0);
+ spi->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(spi->clk)) {
ret = PTR_ERR(spi->clk);
dev_err(&pdev->dev, "clk get failed: %d\n", ret);
@@ -1139,9 +1879,10 @@ static int stm32_spi_probe(struct platform_device *pdev)
reset_control_deassert(spi->rst);
}
- spi->fifo_size = stm32_spi_get_fifo_size(spi);
+ if (spi->cfg->has_fifo)
+ spi->fifo_size = spi->cfg->get_fifo_size(spi);
- ret = stm32_spi_config(spi);
+ ret = spi->cfg->config(spi);
if (ret) {
dev_err(&pdev->dev, "controller configuration failed: %d\n",
ret);
@@ -1151,11 +1892,11 @@ static int stm32_spi_probe(struct platform_device *pdev)
master->dev.of_node = pdev->dev.of_node;
master->auto_runtime_pm = true;
master->bus_num = pdev->id;
- master->mode_bits = SPI_MODE_3 | SPI_CS_HIGH | SPI_LSB_FIRST |
- SPI_3WIRE | SPI_LOOP;
- master->bits_per_word_mask = stm32_spi_get_bpw_mask(spi);
- master->max_speed_hz = spi->clk_rate / SPI_MBR_DIV_MIN;
- master->min_speed_hz = spi->clk_rate / SPI_MBR_DIV_MAX;
+ master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST |
+ SPI_3WIRE;
+ master->bits_per_word_mask = spi->cfg->get_bpw_mask(spi);
+ master->max_speed_hz = spi->clk_rate / spi->cfg->baud_rate_div_min;
+ master->min_speed_hz = spi->clk_rate / spi->cfg->baud_rate_div_max;
master->setup = stm32_spi_setup;
master->prepare_message = stm32_spi_prepare_msg;
master->transfer_one = stm32_spi_transfer_one;
@@ -1233,7 +1974,7 @@ static int stm32_spi_remove(struct platform_device *pdev)
struct spi_master *master = platform_get_drvdata(pdev);
struct stm32_spi *spi = spi_master_get_devdata(master);
- stm32_spi_disable(spi);
+ spi->cfg->disable(spi);
if (master->dma_tx)
dma_release_channel(master->dma_tx);