summaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi-atmel.c12
-rw-r--r--drivers/spi/spi-img-spfi.c7
-rw-r--r--drivers/spi/spi-pl022.c2
-rw-r--r--drivers/spi/spi-qup.c9
-rw-r--r--drivers/spi/spi-ti-qspi.c22
-rw-r--r--drivers/spi/spi.c5
6 files changed, 44 insertions, 13 deletions
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 9af7841f2e8c..06de34001c66 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -764,17 +764,17 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master,
(unsigned long long)xfer->rx_dma);
}
- /* REVISIT: We're waiting for ENDRX before we start the next
+ /* REVISIT: We're waiting for RXBUFF before we start the next
* transfer because we need to handle some difficult timing
- * issues otherwise. If we wait for ENDTX in one transfer and
- * then starts waiting for ENDRX in the next, it's difficult
- * to tell the difference between the ENDRX interrupt we're
- * actually waiting for and the ENDRX interrupt of the
+ * issues otherwise. If we wait for TXBUFE in one transfer and
+ * then starts waiting for RXBUFF in the next, it's difficult
+ * to tell the difference between the RXBUFF interrupt we're
+ * actually waiting for and the RXBUFF interrupt of the
* previous transfer.
*
* It should be doable, though. Just not now...
*/
- spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
+ spi_writel(as, IER, SPI_BIT(RXBUFF) | SPI_BIT(OVRES));
spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
}
diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index c01567d53581..e649bc7d4c08 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -459,6 +459,13 @@ static int img_spfi_transfer_one(struct spi_master *master,
unsigned long flags;
int ret;
+ if (xfer->len > SPFI_TRANSACTION_TSIZE_MASK) {
+ dev_err(spfi->dev,
+ "Transfer length (%d) is greater than the max supported (%d)",
+ xfer->len, SPFI_TRANSACTION_TSIZE_MASK);
+ return -EINVAL;
+ }
+
/*
* Stop all DMA and reset the controller if the previous transaction
* timed-out and never completed it's DMA.
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 89ca162801da..ee513a85296b 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -534,12 +534,12 @@ static void giveback(struct pl022 *pl022)
pl022->cur_msg = NULL;
pl022->cur_transfer = NULL;
pl022->cur_chip = NULL;
- spi_finalize_current_message(pl022->master);
/* disable the SPI/SSP operation */
writew((readw(SSP_CR1(pl022->virtbase)) &
(~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
+ spi_finalize_current_message(pl022->master);
}
/**
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index ff9cdbdb6672..2b2c359f5a50 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -498,7 +498,7 @@ static int spi_qup_probe(struct platform_device *pdev)
struct resource *res;
struct device *dev;
void __iomem *base;
- u32 max_freq, iomode;
+ u32 max_freq, iomode, num_cs;
int ret, irq, size;
dev = &pdev->dev;
@@ -550,10 +550,11 @@ static int spi_qup_probe(struct platform_device *pdev)
}
/* use num-cs unless not present or out of range */
- if (of_property_read_u16(dev->of_node, "num-cs",
- &master->num_chipselect) ||
- (master->num_chipselect > SPI_NUM_CHIPSELECTS))
+ if (of_property_read_u32(dev->of_node, "num-cs", &num_cs) ||
+ num_cs > SPI_NUM_CHIPSELECTS)
master->num_chipselect = SPI_NUM_CHIPSELECTS;
+ else
+ master->num_chipselect = num_cs;
master->bus_num = pdev->id;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 884a716e50cb..5c0616870358 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -101,6 +101,7 @@ struct ti_qspi {
#define QSPI_FLEN(n) ((n - 1) << 0)
/* STATUS REGISTER */
+#define BUSY 0x01
#define WC 0x02
/* INTERRUPT REGISTER */
@@ -199,6 +200,21 @@ static void ti_qspi_restore_ctx(struct ti_qspi *qspi)
ti_qspi_write(qspi, ctx_reg->clkctrl, QSPI_SPI_CLOCK_CNTRL_REG);
}
+static inline u32 qspi_is_busy(struct ti_qspi *qspi)
+{
+ u32 stat;
+ unsigned long timeout = jiffies + QSPI_COMPLETION_TIMEOUT;
+
+ stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
+ while ((stat & BUSY) && time_after(timeout, jiffies)) {
+ cpu_relax();
+ stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
+ }
+
+ WARN(stat & BUSY, "qspi busy\n");
+ return stat & BUSY;
+}
+
static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t)
{
int wlen, count;
@@ -211,6 +227,9 @@ static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t)
wlen = t->bits_per_word >> 3; /* in bytes */
while (count) {
+ if (qspi_is_busy(qspi))
+ return -EBUSY;
+
switch (wlen) {
case 1:
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %02x\n",
@@ -266,6 +285,9 @@ static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t)
while (count) {
dev_dbg(qspi->dev, "rx cmd %08x dc %08x\n", cmd, qspi->dc);
+ if (qspi_is_busy(qspi))
+ return -EBUSY;
+
ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
if (!wait_for_completion_timeout(&qspi->transfer_complete,
QSPI_COMPLETION_TIMEOUT)) {
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index c64a3e59fce3..57a195041dc7 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1105,13 +1105,14 @@ void spi_finalize_current_message(struct spi_master *master)
"failed to unprepare message: %d\n", ret);
}
}
+
+ trace_spi_message_done(mesg);
+
master->cur_msg_prepared = false;
mesg->state = NULL;
if (mesg->complete)
mesg->complete(mesg->context);
-
- trace_spi_message_done(mesg);
}
EXPORT_SYMBOL_GPL(spi_finalize_current_message);