summaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/Kconfig1
-rw-r--r--drivers/spi/spi-altera.c163
-rw-r--r--drivers/spi/spi-ath79.c13
-rw-r--r--drivers/spi/spi-bcm-qspi.c89
-rw-r--r--drivers/spi/spi-bcm63xx-hsspi.c10
-rw-r--r--drivers/spi/spi-bcm63xx.c4
-rw-r--r--drivers/spi/spi-cadence.c4
-rw-r--r--drivers/spi/spi-ep93xx.c501
-rw-r--r--drivers/spi/spi-orion.c4
-rw-r--r--drivers/spi/spi.c110
10 files changed, 357 insertions, 542 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 9b31351fe429..acf566f06241 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -55,7 +55,6 @@ comment "SPI Master Controller Drivers"
config SPI_ALTERA
tristate "Altera SPI Controller"
- select SPI_BITBANG
help
This is the driver for the Altera SPI Controller.
diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c
index b95010e72452..a5adf0d868fc 100644
--- a/drivers/spi/spi-altera.c
+++ b/drivers/spi/spi-altera.c
@@ -18,7 +18,6 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
#include <linux/io.h>
#include <linux/of.h>
@@ -45,10 +44,6 @@
#define ALTERA_SPI_CONTROL_SSO_MSK 0x400
struct altera_spi {
- /* bitbang has to be first */
- struct spi_bitbang bitbang;
- struct completion done;
-
void __iomem *base;
int irq;
int len;
@@ -66,59 +61,64 @@ static inline struct altera_spi *altera_spi_to_hw(struct spi_device *sdev)
return spi_master_get_devdata(sdev->master);
}
-static void altera_spi_chipsel(struct spi_device *spi, int value)
+static void altera_spi_set_cs(struct spi_device *spi, bool is_high)
{
struct altera_spi *hw = altera_spi_to_hw(spi);
- if (spi->mode & SPI_CS_HIGH) {
- switch (value) {
- case BITBANG_CS_INACTIVE:
- writel(1 << spi->chip_select,
- hw->base + ALTERA_SPI_SLAVE_SEL);
- hw->imr |= ALTERA_SPI_CONTROL_SSO_MSK;
- writel(hw->imr, hw->base + ALTERA_SPI_CONTROL);
- break;
-
- case BITBANG_CS_ACTIVE:
- hw->imr &= ~ALTERA_SPI_CONTROL_SSO_MSK;
- writel(hw->imr, hw->base + ALTERA_SPI_CONTROL);
- writel(0, hw->base + ALTERA_SPI_SLAVE_SEL);
- break;
- }
+ if (is_high) {
+ hw->imr &= ~ALTERA_SPI_CONTROL_SSO_MSK;
+ writel(hw->imr, hw->base + ALTERA_SPI_CONTROL);
+ writel(0, hw->base + ALTERA_SPI_SLAVE_SEL);
} else {
- switch (value) {
- case BITBANG_CS_INACTIVE:
- hw->imr &= ~ALTERA_SPI_CONTROL_SSO_MSK;
- writel(hw->imr, hw->base + ALTERA_SPI_CONTROL);
- break;
+ writel(BIT(spi->chip_select), hw->base + ALTERA_SPI_SLAVE_SEL);
+ hw->imr |= ALTERA_SPI_CONTROL_SSO_MSK;
+ writel(hw->imr, hw->base + ALTERA_SPI_CONTROL);
+ }
+}
+
+static void altera_spi_tx_word(struct altera_spi *hw)
+{
+ unsigned int txd = 0;
- case BITBANG_CS_ACTIVE:
- writel(1 << spi->chip_select,
- hw->base + ALTERA_SPI_SLAVE_SEL);
- hw->imr |= ALTERA_SPI_CONTROL_SSO_MSK;
- writel(hw->imr, hw->base + ALTERA_SPI_CONTROL);
+ if (hw->tx) {
+ switch (hw->bytes_per_word) {
+ case 1:
+ txd = hw->tx[hw->count];
+ break;
+ case 2:
+ txd = (hw->tx[hw->count * 2]
+ | (hw->tx[hw->count * 2 + 1] << 8));
break;
}
}
+
+ writel(txd, hw->base + ALTERA_SPI_TXDATA);
}
-static inline unsigned int hw_txbyte(struct altera_spi *hw, int count)
+static void altera_spi_rx_word(struct altera_spi *hw)
{
- if (hw->tx) {
+ unsigned int rxd;
+
+ rxd = readl(hw->base + ALTERA_SPI_RXDATA);
+ if (hw->rx) {
switch (hw->bytes_per_word) {
case 1:
- return hw->tx[count];
+ hw->rx[hw->count] = rxd;
+ break;
case 2:
- return (hw->tx[count * 2]
- | (hw->tx[count * 2 + 1] << 8));
+ hw->rx[hw->count * 2] = rxd;
+ hw->rx[hw->count * 2 + 1] = rxd >> 8;
+ break;
}
}
- return 0;
+
+ hw->count++;
}
-static int altera_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
+static int altera_spi_txrx(struct spi_master *master,
+ struct spi_device *spi, struct spi_transfer *t)
{
- struct altera_spi *hw = altera_spi_to_hw(spi);
+ struct altera_spi *hw = spi_master_get_devdata(master);
hw->tx = t->tx_buf;
hw->rx = t->rx_buf;
@@ -132,67 +132,39 @@ static int altera_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
writel(hw->imr, hw->base + ALTERA_SPI_CONTROL);
/* send the first byte */
- writel(hw_txbyte(hw, 0), hw->base + ALTERA_SPI_TXDATA);
-
- wait_for_completion(&hw->done);
- /* disable receive interrupt */
- hw->imr &= ~ALTERA_SPI_CONTROL_IRRDY_MSK;
- writel(hw->imr, hw->base + ALTERA_SPI_CONTROL);
+ altera_spi_tx_word(hw);
} else {
while (hw->count < hw->len) {
- unsigned int rxd;
-
- writel(hw_txbyte(hw, hw->count),
- hw->base + ALTERA_SPI_TXDATA);
+ altera_spi_tx_word(hw);
while (!(readl(hw->base + ALTERA_SPI_STATUS) &
ALTERA_SPI_STATUS_RRDY_MSK))
cpu_relax();
- rxd = readl(hw->base + ALTERA_SPI_RXDATA);
- if (hw->rx) {
- switch (hw->bytes_per_word) {
- case 1:
- hw->rx[hw->count] = rxd;
- break;
- case 2:
- hw->rx[hw->count * 2] = rxd;
- hw->rx[hw->count * 2 + 1] = rxd >> 8;
- break;
- }
- }
-
- hw->count++;
+ altera_spi_rx_word(hw);
}
+ spi_finalize_current_transfer(master);
}
- return hw->count * hw->bytes_per_word;
+ return t->len;
}
static irqreturn_t altera_spi_irq(int irq, void *dev)
{
- struct altera_spi *hw = dev;
- unsigned int rxd;
+ struct spi_master *master = dev;
+ struct altera_spi *hw = spi_master_get_devdata(master);
- rxd = readl(hw->base + ALTERA_SPI_RXDATA);
- if (hw->rx) {
- switch (hw->bytes_per_word) {
- case 1:
- hw->rx[hw->count] = rxd;
- break;
- case 2:
- hw->rx[hw->count * 2] = rxd;
- hw->rx[hw->count * 2 + 1] = rxd >> 8;
- break;
- }
- }
+ altera_spi_rx_word(hw);
- hw->count++;
+ if (hw->count < hw->len) {
+ altera_spi_tx_word(hw);
+ } else {
+ /* disable receive interrupt */
+ hw->imr &= ~ALTERA_SPI_CONTROL_IRRDY_MSK;
+ writel(hw->imr, hw->base + ALTERA_SPI_CONTROL);
- if (hw->count < hw->len)
- writel(hw_txbyte(hw, hw->count), hw->base + ALTERA_SPI_TXDATA);
- else
- complete(&hw->done);
+ spi_finalize_current_transfer(master);
+ }
return IRQ_HANDLED;
}
@@ -214,14 +186,10 @@ static int altera_spi_probe(struct platform_device *pdev)
master->mode_bits = SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16);
master->dev.of_node = pdev->dev.of_node;
+ master->transfer_one = altera_spi_txrx;
+ master->set_cs = altera_spi_set_cs;
hw = spi_master_get_devdata(master);
- platform_set_drvdata(pdev, hw);
-
- /* setup the state for the bitbang driver */
- hw->bitbang.master = master;
- hw->bitbang.chipselect = altera_spi_chipsel;
- hw->bitbang.txrx_bufs = altera_spi_txrx;
/* find and map our resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -239,15 +207,13 @@ static int altera_spi_probe(struct platform_device *pdev)
/* irq is optional */
hw->irq = platform_get_irq(pdev, 0);
if (hw->irq >= 0) {
- init_completion(&hw->done);
err = devm_request_irq(&pdev->dev, hw->irq, altera_spi_irq, 0,
- pdev->name, hw);
+ pdev->name, master);
if (err)
goto exit;
}
- /* register our spi controller */
- err = spi_bitbang_start(&hw->bitbang);
+ err = devm_spi_register_master(&pdev->dev, master);
if (err)
goto exit;
dev_info(&pdev->dev, "base %p, irq %d\n", hw->base, hw->irq);
@@ -258,16 +224,6 @@ exit:
return err;
}
-static int altera_spi_remove(struct platform_device *dev)
-{
- struct altera_spi *hw = platform_get_drvdata(dev);
- struct spi_master *master = hw->bitbang.master;
-
- spi_bitbang_stop(&hw->bitbang);
- spi_master_put(master);
- return 0;
-}
-
#ifdef CONFIG_OF
static const struct of_device_id altera_spi_match[] = {
{ .compatible = "ALTR,spi-1.0", },
@@ -279,7 +235,6 @@ MODULE_DEVICE_TABLE(of, altera_spi_match);
static struct platform_driver altera_spi_driver = {
.probe = altera_spi_probe,
- .remove = altera_spi_remove,
.driver = {
.name = DRV_NAME,
.pm = NULL,
diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c
index b89cee11f418..0719bd484891 100644
--- a/drivers/spi/spi-ath79.c
+++ b/drivers/spi/spi-ath79.c
@@ -39,15 +39,15 @@ struct ath79_spi {
u32 reg_ctrl;
void __iomem *base;
struct clk *clk;
- unsigned rrw_delay;
+ unsigned int rrw_delay;
};
-static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg)
+static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned int reg)
{
return ioread32(sp->base + reg);
}
-static inline void ath79_spi_wr(struct ath79_spi *sp, unsigned reg, u32 val)
+static inline void ath79_spi_wr(struct ath79_spi *sp, unsigned int reg, u32 val)
{
iowrite32(val, sp->base + reg);
}
@@ -57,7 +57,7 @@ static inline struct ath79_spi *ath79_spidev_to_sp(struct spi_device *spi)
return spi_master_get_devdata(spi->master);
}
-static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned nsecs)
+static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned int nsecs)
{
if (nsecs > sp->rrw_delay)
ndelay(nsecs - sp->rrw_delay);
@@ -148,9 +148,8 @@ static int ath79_spi_setup_cs(struct spi_device *spi)
static void ath79_spi_cleanup_cs(struct spi_device *spi)
{
- if (gpio_is_valid(spi->cs_gpio)) {
+ if (gpio_is_valid(spi->cs_gpio))
gpio_free(spi->cs_gpio);
- }
}
static int ath79_spi_setup(struct spi_device *spi)
@@ -176,7 +175,7 @@ static void ath79_spi_cleanup(struct spi_device *spi)
spi_bitbang_cleanup(spi);
}
-static u32 ath79_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs,
+static u32 ath79_spi_txrx_mode0(struct spi_device *spi, unsigned int nsecs,
u32 word, u8 bits)
{
struct ath79_spi *sp = ath79_spidev_to_sp(spi);
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index b19722ba908c..6ef6c44f39f5 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -25,7 +25,6 @@
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/mtd/spi-nor.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
@@ -349,76 +348,60 @@ static void bcm_qspi_bspi_set_xfer_params(struct bcm_qspi *qspi, u8 cmd_byte,
bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, flex_mode);
}
-static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width,
- int addrlen, int hp)
+static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi,
+ struct spi_flash_read_message *msg,
+ int hp)
{
int bpc = 0, bpp = 0;
- u8 command = SPINOR_OP_READ_FAST;
- int flex_mode = 1, rv = 0;
- bool spans_4byte = false;
+ u8 command = msg->read_opcode;
+ int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
+ int addrlen = msg->addr_width;
+ int addr_nbits = msg->addr_nbits ? msg->addr_nbits : SPI_NBITS_SINGLE;
+ int flex_mode = 1;
dev_dbg(&qspi->pdev->dev, "set flex mode w %x addrlen %x hp %d\n",
width, addrlen, hp);
- if (addrlen == BSPI_ADDRLEN_4BYTES) {
+ if (addrlen == BSPI_ADDRLEN_4BYTES)
bpp = BSPI_BPP_ADDR_SELECT_MASK;
- spans_4byte = true;
- }
- bpp |= 8;
+ bpp |= msg->dummy_bytes * (8/addr_nbits);
switch (width) {
case SPI_NBITS_SINGLE:
if (addrlen == BSPI_ADDRLEN_3BYTES)
/* default mode, does not need flex_cmd */
flex_mode = 0;
- else
- command = SPINOR_OP_READ_FAST_4B;
break;
case SPI_NBITS_DUAL:
bpc = 0x00000001;
if (hp) {
bpc |= 0x00010100; /* address and mode are 2-bit */
bpp = BSPI_BPP_MODE_SELECT_MASK;
- command = OPCODE_DIOR;
- if (spans_4byte)
- command = OPCODE_DIOR_4B;
- } else {
- command = SPINOR_OP_READ_1_1_2;
- if (spans_4byte)
- command = SPINOR_OP_READ_1_1_2_4B;
}
break;
case SPI_NBITS_QUAD:
bpc = 0x00000002;
if (hp) {
bpc |= 0x00020200; /* address and mode are 4-bit */
- bpp = 4; /* dummy cycles */
- bpp |= BSPI_BPP_ADDR_SELECT_MASK;
- command = OPCODE_QIOR;
- if (spans_4byte)
- command = OPCODE_QIOR_4B;
- } else {
- command = SPINOR_OP_READ_1_1_4;
- if (spans_4byte)
- command = SPINOR_OP_READ_1_1_4_4B;
+ bpp |= BSPI_BPP_MODE_SELECT_MASK;
}
break;
default:
- rv = -EINVAL;
- break;
+ return -EINVAL;
}
- if (rv == 0)
- bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc,
- flex_mode);
+ bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc, flex_mode);
- return rv;
+ return 0;
}
-static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
- int addrlen, int hp)
+static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi,
+ struct spi_flash_read_message *msg,
+ int hp)
{
+ int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
+ int addrlen = msg->addr_width;
u32 data = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
dev_dbg(&qspi->pdev->dev, "set override mode w %x addrlen %x hp %d\n",
@@ -430,7 +413,6 @@ static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
data &= ~(BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD |
BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL);
break;
-
case SPI_NBITS_QUAD:
/* clear dual mode and set quad mode */
data &= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL;
@@ -455,15 +437,17 @@ static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
/* set the override mode */
data |= BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE;
bcm_qspi_write(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL, data);
- bcm_qspi_bspi_set_xfer_params(qspi, SPINOR_OP_READ_FAST, 0, 0, 0);
+ bcm_qspi_bspi_set_xfer_params(qspi, msg->read_opcode, 0, 0, 0);
return 0;
}
static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
- int width, int addrlen, int hp)
+ struct spi_flash_read_message *msg, int hp)
{
int error = 0;
+ int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
+ int addrlen = msg->addr_width;
/* default mode */
qspi->xfer_mode.flex_mode = true;
@@ -475,23 +459,13 @@ static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
mask = BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE;
if (val & mask || qspi->s3_strap_override_ctrl & mask) {
qspi->xfer_mode.flex_mode = false;
- bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE,
- 0);
-
- if ((val | qspi->s3_strap_override_ctrl) &
- BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL)
- width = SPI_NBITS_DUAL;
- else if ((val | qspi->s3_strap_override_ctrl) &
- BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD)
- width = SPI_NBITS_QUAD;
-
- error = bcm_qspi_bspi_set_override(qspi, width, addrlen,
- hp);
+ bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, 0);
+ error = bcm_qspi_bspi_set_override(qspi, msg, hp);
}
}
if (qspi->xfer_mode.flex_mode)
- error = bcm_qspi_bspi_set_flex_mode(qspi, width, addrlen, hp);
+ error = bcm_qspi_bspi_set_flex_mode(qspi, msg, hp);
if (error) {
dev_warn(&qspi->pdev->dev,
@@ -981,7 +955,7 @@ static int bcm_qspi_flash_read(struct spi_device *spi,
struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
int ret = 0;
bool mspi_read = false;
- u32 io_width, addrlen, addr, len;
+ u32 addr, len;
u_char *buf;
buf = msg->buf;
@@ -1010,9 +984,7 @@ static int bcm_qspi_flash_read(struct spi_device *spi,
if (mspi_read)
return bcm_qspi_mspi_flash_read(spi, msg);
- io_width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
- addrlen = msg->addr_width;
- ret = bcm_qspi_bspi_set_mode(qspi, io_width, addrlen, -1);
+ ret = bcm_qspi_bspi_set_mode(qspi, msg, -1);
if (!ret)
ret = bcm_qspi_bspi_flash_read(spi, msg);
@@ -1422,6 +1394,11 @@ static int __maybe_unused bcm_qspi_suspend(struct device *dev)
{
struct bcm_qspi *qspi = dev_get_drvdata(dev);
+ /* store the override strap value */
+ if (!bcm_qspi_bspi_ver_three(qspi))
+ qspi->s3_strap_override_ctrl =
+ bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
+
spi_master_suspend(qspi->master);
clk_disable(qspi->clk);
bcm_qspi_hw_uninit(qspi);
diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c
index 4da2d4a524ca..cbcba614b253 100644
--- a/drivers/spi/spi-bcm63xx-hsspi.c
+++ b/drivers/spi/spi-bcm63xx-hsspi.c
@@ -108,7 +108,7 @@ struct bcm63xx_hsspi {
u8 cs_polarity;
};
-static void bcm63xx_hsspi_set_cs(struct bcm63xx_hsspi *bs, unsigned cs,
+static void bcm63xx_hsspi_set_cs(struct bcm63xx_hsspi *bs, unsigned int cs,
bool active)
{
u32 reg;
@@ -127,7 +127,7 @@ static void bcm63xx_hsspi_set_cs(struct bcm63xx_hsspi *bs, unsigned cs,
static void bcm63xx_hsspi_set_clk(struct bcm63xx_hsspi *bs,
struct spi_device *spi, int hz)
{
- unsigned profile = spi->chip_select;
+ unsigned int profile = spi->chip_select;
u32 reg;
reg = DIV_ROUND_UP(2048, DIV_ROUND_UP(bs->speed_hz, hz));
@@ -154,7 +154,7 @@ static void bcm63xx_hsspi_set_clk(struct bcm63xx_hsspi *bs,
static int bcm63xx_hsspi_do_txrx(struct spi_device *spi, struct spi_transfer *t)
{
struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master);
- unsigned chip_select = spi->chip_select;
+ unsigned int chip_select = spi->chip_select;
u16 opcode = 0;
int pending = t->len;
int step_size = HSSPI_BUFFER_LEN;
@@ -338,8 +338,8 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- dev_err(dev, "no irq\n");
- return -ENXIO;
+ dev_err(dev, "no irq: %d\n", irq);
+ return irq;
}
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index 84c7356ce5b4..bfe5754768f9 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -530,8 +530,8 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
- dev_err(dev, "no irq\n");
- return -ENXIO;
+ dev_err(dev, "no irq: %d\n", irq);
+ return irq;
}
clk = devm_clk_get(dev, "spi");
diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c
index f0b5c7b91f37..5c9516ae4942 100644
--- a/drivers/spi/spi-cadence.c
+++ b/drivers/spi/spi-cadence.c
@@ -576,10 +576,10 @@ static int cdns_spi_probe(struct platform_device *pdev)
goto clk_dis_apb;
}
- pm_runtime_enable(&pdev->dev);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
ret = of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs);
if (ret < 0)
@@ -704,7 +704,9 @@ static int __maybe_unused cdns_spi_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct spi_master *master = platform_get_drvdata(pdev);
+ struct cdns_spi *xspi = spi_master_get_devdata(master);
+ cdns_spi_init_hw(xspi);
return spi_master_resume(master);
}
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index b5d766064b7b..e5cc07357746 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -70,12 +70,9 @@
/**
* struct ep93xx_spi - EP93xx SPI controller structure
- * @pdev: pointer to platform device
* @clk: clock for the controller
- * @regs_base: pointer to ioremap()'d registers
+ * @mmio: pointer to ioremap()'d registers
* @sspdr_phys: physical address of the SSPDR register
- * @wait: wait here until given transfer is completed
- * @current_msg: message that is currently processed (or %NULL if none)
* @tx: current byte in transfer to transmit
* @rx: current byte in transfer to receive
* @fifo_level: how full is FIFO (%0..%SPI_FIFO_SIZE - %1). Receiving one
@@ -90,12 +87,9 @@
* the client
*/
struct ep93xx_spi {
- const struct platform_device *pdev;
struct clk *clk;
- void __iomem *regs_base;
+ void __iomem *mmio;
unsigned long sspdr_phys;
- struct completion wait;
- struct spi_message *current_msg;
size_t tx;
size_t rx;
size_t fifo_level;
@@ -111,91 +105,23 @@ struct ep93xx_spi {
/* converts bits per word to CR0.DSS value */
#define bits_per_word_to_dss(bpw) ((bpw) - 1)
-static void ep93xx_spi_write_u8(const struct ep93xx_spi *espi,
- u16 reg, u8 value)
-{
- writeb(value, espi->regs_base + reg);
-}
-
-static u8 ep93xx_spi_read_u8(const struct ep93xx_spi *spi, u16 reg)
-{
- return readb(spi->regs_base + reg);
-}
-
-static void ep93xx_spi_write_u16(const struct ep93xx_spi *espi,
- u16 reg, u16 value)
-{
- writew(value, espi->regs_base + reg);
-}
-
-static u16 ep93xx_spi_read_u16(const struct ep93xx_spi *spi, u16 reg)
-{
- return readw(spi->regs_base + reg);
-}
-
-static int ep93xx_spi_enable(const struct ep93xx_spi *espi)
-{
- u8 regval;
- int err;
-
- err = clk_enable(espi->clk);
- if (err)
- return err;
-
- regval = ep93xx_spi_read_u8(espi, SSPCR1);
- regval |= SSPCR1_SSE;
- ep93xx_spi_write_u8(espi, SSPCR1, regval);
-
- return 0;
-}
-
-static void ep93xx_spi_disable(const struct ep93xx_spi *espi)
-{
- u8 regval;
-
- regval = ep93xx_spi_read_u8(espi, SSPCR1);
- regval &= ~SSPCR1_SSE;
- ep93xx_spi_write_u8(espi, SSPCR1, regval);
-
- clk_disable(espi->clk);
-}
-
-static void ep93xx_spi_enable_interrupts(const struct ep93xx_spi *espi)
-{
- u8 regval;
-
- regval = ep93xx_spi_read_u8(espi, SSPCR1);
- regval |= (SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE);
- ep93xx_spi_write_u8(espi, SSPCR1, regval);
-}
-
-static void ep93xx_spi_disable_interrupts(const struct ep93xx_spi *espi)
-{
- u8 regval;
-
- regval = ep93xx_spi_read_u8(espi, SSPCR1);
- regval &= ~(SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE);
- ep93xx_spi_write_u8(espi, SSPCR1, regval);
-}
-
/**
* ep93xx_spi_calc_divisors() - calculates SPI clock divisors
- * @espi: ep93xx SPI controller struct
+ * @master: SPI master
* @rate: desired SPI output clock rate
* @div_cpsr: pointer to return the cpsr (pre-scaler) divider
* @div_scr: pointer to return the scr divider
*/
-static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi,
+static int ep93xx_spi_calc_divisors(struct spi_master *master,
u32 rate, u8 *div_cpsr, u8 *div_scr)
{
- struct spi_master *master = platform_get_drvdata(espi->pdev);
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
unsigned long spi_clk_rate = clk_get_rate(espi->clk);
int cpsr, scr;
/*
* Make sure that max value is between values supported by the
- * controller. Note that minimum value is already checked in
- * ep93xx_spi_transfer_one_message().
+ * controller.
*/
rate = clamp(rate, master->min_speed_hz, master->max_speed_hz);
@@ -220,26 +146,18 @@ static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi,
return -EINVAL;
}
-static void ep93xx_spi_cs_control(struct spi_device *spi, bool enable)
-{
- if (spi->mode & SPI_CS_HIGH)
- enable = !enable;
-
- if (gpio_is_valid(spi->cs_gpio))
- gpio_set_value(spi->cs_gpio, !enable);
-}
-
-static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi,
+static int ep93xx_spi_chip_setup(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *xfer)
{
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
u8 dss = bits_per_word_to_dss(xfer->bits_per_word);
u8 div_cpsr = 0;
u8 div_scr = 0;
u16 cr0;
int err;
- err = ep93xx_spi_calc_divisors(espi, xfer->speed_hz,
+ err = ep93xx_spi_calc_divisors(master, xfer->speed_hz,
&div_cpsr, &div_scr);
if (err)
return err;
@@ -248,51 +166,49 @@ static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi,
cr0 |= (spi->mode & (SPI_CPHA | SPI_CPOL)) << SSPCR0_MODE_SHIFT;
cr0 |= dss;
- dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",
+ dev_dbg(&master->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",
spi->mode, div_cpsr, div_scr, dss);
- dev_dbg(&espi->pdev->dev, "setup: cr0 %#x\n", cr0);
+ dev_dbg(&master->dev, "setup: cr0 %#x\n", cr0);
- ep93xx_spi_write_u8(espi, SSPCPSR, div_cpsr);
- ep93xx_spi_write_u16(espi, SSPCR0, cr0);
+ writel(div_cpsr, espi->mmio + SSPCPSR);
+ writel(cr0, espi->mmio + SSPCR0);
return 0;
}
-static void ep93xx_do_write(struct ep93xx_spi *espi, struct spi_transfer *t)
+static void ep93xx_do_write(struct spi_master *master)
{
- if (t->bits_per_word > 8) {
- u16 tx_val = 0;
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
+ struct spi_transfer *xfer = master->cur_msg->state;
+ u32 val = 0;
- if (t->tx_buf)
- tx_val = ((u16 *)t->tx_buf)[espi->tx];
- ep93xx_spi_write_u16(espi, SSPDR, tx_val);
- espi->tx += sizeof(tx_val);
+ if (xfer->bits_per_word > 8) {
+ if (xfer->tx_buf)
+ val = ((u16 *)xfer->tx_buf)[espi->tx];
+ espi->tx += 2;
} else {
- u8 tx_val = 0;
-
- if (t->tx_buf)
- tx_val = ((u8 *)t->tx_buf)[espi->tx];
- ep93xx_spi_write_u8(espi, SSPDR, tx_val);
- espi->tx += sizeof(tx_val);
+ if (xfer->tx_buf)
+ val = ((u8 *)xfer->tx_buf)[espi->tx];
+ espi->tx += 1;
}
+ writel(val, espi->mmio + SSPDR);
}
-static void ep93xx_do_read(struct ep93xx_spi *espi, struct spi_transfer *t)
+static void ep93xx_do_read(struct spi_master *master)
{
- if (t->bits_per_word > 8) {
- u16 rx_val;
-
- rx_val = ep93xx_spi_read_u16(espi, SSPDR);
- if (t->rx_buf)
- ((u16 *)t->rx_buf)[espi->rx] = rx_val;
- espi->rx += sizeof(rx_val);
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
+ struct spi_transfer *xfer = master->cur_msg->state;
+ u32 val;
+
+ val = readl(espi->mmio + SSPDR);
+ if (xfer->bits_per_word > 8) {
+ if (xfer->rx_buf)
+ ((u16 *)xfer->rx_buf)[espi->rx] = val;
+ espi->rx += 2;
} else {
- u8 rx_val;
-
- rx_val = ep93xx_spi_read_u8(espi, SSPDR);
- if (t->rx_buf)
- ((u8 *)t->rx_buf)[espi->rx] = rx_val;
- espi->rx += sizeof(rx_val);
+ if (xfer->rx_buf)
+ ((u8 *)xfer->rx_buf)[espi->rx] = val;
+ espi->rx += 1;
}
}
@@ -307,44 +223,32 @@ static void ep93xx_do_read(struct ep93xx_spi *espi, struct spi_transfer *t)
* When this function is finished, RX FIFO should be empty and TX FIFO should be
* full.
*/
-static int ep93xx_spi_read_write(struct ep93xx_spi *espi)
+static int ep93xx_spi_read_write(struct spi_master *master)
{
- struct spi_message *msg = espi->current_msg;
- struct spi_transfer *t = msg->state;
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
+ struct spi_transfer *xfer = master->cur_msg->state;
/* read as long as RX FIFO has frames in it */
- while ((ep93xx_spi_read_u8(espi, SSPSR) & SSPSR_RNE)) {
- ep93xx_do_read(espi, t);
+ while ((readl(espi->mmio + SSPSR) & SSPSR_RNE)) {
+ ep93xx_do_read(master);
espi->fifo_level--;
}
/* write as long as TX FIFO has room */
- while (espi->fifo_level < SPI_FIFO_SIZE && espi->tx < t->len) {
- ep93xx_do_write(espi, t);
+ while (espi->fifo_level < SPI_FIFO_SIZE && espi->tx < xfer->len) {
+ ep93xx_do_write(master);
espi->fifo_level++;
}
- if (espi->rx == t->len)
+ if (espi->rx == xfer->len)
return 0;
return -EINPROGRESS;
}
-static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi)
-{
- /*
- * Now everything is set up for the current transfer. We prime the TX
- * FIFO, enable interrupts, and wait for the transfer to complete.
- */
- if (ep93xx_spi_read_write(espi)) {
- ep93xx_spi_enable_interrupts(espi);
- wait_for_completion(&espi->wait);
- }
-}
-
/**
* ep93xx_spi_dma_prepare() - prepares a DMA transfer
- * @espi: ep93xx SPI controller struct
+ * @master: SPI master
* @dir: DMA transfer direction
*
* Function configures the DMA, maps the buffer and prepares the DMA
@@ -352,9 +256,11 @@ static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi)
* in case of failure.
*/
static struct dma_async_tx_descriptor *
-ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
+ep93xx_spi_dma_prepare(struct spi_master *master,
+ enum dma_transfer_direction dir)
{
- struct spi_transfer *t = espi->current_msg->state;
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
+ struct spi_transfer *xfer = master->cur_msg->state;
struct dma_async_tx_descriptor *txd;
enum dma_slave_buswidth buswidth;
struct dma_slave_config conf;
@@ -362,10 +268,10 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
struct sg_table *sgt;
struct dma_chan *chan;
const void *buf, *pbuf;
- size_t len = t->len;
+ size_t len = xfer->len;
int i, ret, nents;
- if (t->bits_per_word > 8)
+ if (xfer->bits_per_word > 8)
buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
else
buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
@@ -375,14 +281,14 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
if (dir == DMA_DEV_TO_MEM) {
chan = espi->dma_rx;
- buf = t->rx_buf;
+ buf = xfer->rx_buf;
sgt = &espi->rx_sgt;
conf.src_addr = espi->sspdr_phys;
conf.src_addr_width = buswidth;
} else {
chan = espi->dma_tx;
- buf = t->tx_buf;
+ buf = xfer->tx_buf;
sgt = &espi->tx_sgt;
conf.dst_addr = espi->sspdr_phys;
@@ -429,7 +335,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
}
if (WARN_ON(len)) {
- dev_warn(&espi->pdev->dev, "len = %zu expected 0!\n", len);
+ dev_warn(&master->dev, "len = %zu expected 0!\n", len);
return ERR_PTR(-EINVAL);
}
@@ -447,15 +353,16 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
/**
* ep93xx_spi_dma_finish() - finishes with a DMA transfer
- * @espi: ep93xx SPI controller struct
+ * @master: SPI master
* @dir: DMA transfer direction
*
* Function finishes with the DMA transfer. After this, the DMA buffer is
* unmapped.
*/
-static void ep93xx_spi_dma_finish(struct ep93xx_spi *espi,
+static void ep93xx_spi_dma_finish(struct spi_master *master,
enum dma_transfer_direction dir)
{
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
struct dma_chan *chan;
struct sg_table *sgt;
@@ -472,72 +379,107 @@ static void ep93xx_spi_dma_finish(struct ep93xx_spi *espi,
static void ep93xx_spi_dma_callback(void *callback_param)
{
- complete(callback_param);
+ struct spi_master *master = callback_param;
+
+ ep93xx_spi_dma_finish(master, DMA_MEM_TO_DEV);
+ ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM);
+
+ spi_finalize_current_transfer(master);
}
-static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi)
+static int ep93xx_spi_dma_transfer(struct spi_master *master)
{
- struct spi_message *msg = espi->current_msg;
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
struct dma_async_tx_descriptor *rxd, *txd;
- rxd = ep93xx_spi_dma_prepare(espi, DMA_DEV_TO_MEM);
+ rxd = ep93xx_spi_dma_prepare(master, DMA_DEV_TO_MEM);
if (IS_ERR(rxd)) {
- dev_err(&espi->pdev->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd));
- msg->status = PTR_ERR(rxd);
- return;
+ dev_err(&master->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd));
+ return PTR_ERR(rxd);
}
- txd = ep93xx_spi_dma_prepare(espi, DMA_MEM_TO_DEV);
+ txd = ep93xx_spi_dma_prepare(master, DMA_MEM_TO_DEV);
if (IS_ERR(txd)) {
- ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM);
- dev_err(&espi->pdev->dev, "DMA TX failed: %ld\n", PTR_ERR(txd));
- msg->status = PTR_ERR(txd);
- return;
+ ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM);
+ dev_err(&master->dev, "DMA TX failed: %ld\n", PTR_ERR(txd));
+ return PTR_ERR(txd);
}
/* We are ready when RX is done */
rxd->callback = ep93xx_spi_dma_callback;
- rxd->callback_param = &espi->wait;
+ rxd->callback_param = master;
- /* Now submit both descriptors and wait while they finish */
+ /* Now submit both descriptors and start DMA */
dmaengine_submit(rxd);
dmaengine_submit(txd);
dma_async_issue_pending(espi->dma_rx);
dma_async_issue_pending(espi->dma_tx);
- wait_for_completion(&espi->wait);
-
- ep93xx_spi_dma_finish(espi, DMA_MEM_TO_DEV);
- ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM);
+ /* signal that we need to wait for completion */
+ return 1;
}
-/**
- * ep93xx_spi_process_transfer() - processes one SPI transfer
- * @espi: ep93xx SPI controller struct
- * @msg: current message
- * @t: transfer to process
- *
- * This function processes one SPI transfer given in @t. Function waits until
- * transfer is complete (may sleep) and updates @msg->status based on whether
- * transfer was successfully processed or not.
- */
-static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
- struct spi_message *msg,
- struct spi_transfer *t)
+static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id)
{
- int err;
+ struct spi_master *master = dev_id;
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
+ u32 val;
+
+ /*
+ * If we got ROR (receive overrun) interrupt we know that something is
+ * wrong. Just abort the message.
+ */
+ if (readl(espi->mmio + SSPIIR) & SSPIIR_RORIS) {
+ /* clear the overrun interrupt */
+ writel(0, espi->mmio + SSPICR);
+ dev_warn(&master->dev,
+ "receive overrun, aborting the message\n");
+ master->cur_msg->status = -EIO;
+ } else {
+ /*
+ * Interrupt is either RX (RIS) or TX (TIS). For both cases we
+ * simply execute next data transfer.
+ */
+ if (ep93xx_spi_read_write(master)) {
+ /*
+ * In normal case, there still is some processing left
+ * for current transfer. Let's wait for the next
+ * interrupt then.
+ */
+ return IRQ_HANDLED;
+ }
+ }
- msg->state = t;
+ /*
+ * Current transfer is finished, either with error or with success. In
+ * any case we disable interrupts and notify the worker to handle
+ * any post-processing of the message.
+ */
+ val = readl(espi->mmio + SSPCR1);
+ val &= ~(SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE);
+ writel(val, espi->mmio + SSPCR1);
+
+ spi_finalize_current_transfer(master);
+
+ return IRQ_HANDLED;
+}
- err = ep93xx_spi_chip_setup(espi, msg->spi, t);
- if (err) {
- dev_err(&espi->pdev->dev,
- "failed to setup chip for transfer\n");
- msg->status = err;
- return;
+static int ep93xx_spi_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
+ u32 val;
+ int ret;
+
+ ret = ep93xx_spi_chip_setup(master, spi, xfer);
+ if (ret) {
+ dev_err(&master->dev, "failed to setup chip for transfer\n");
+ return ret;
}
+ master->cur_msg->state = xfer;
espi->rx = 0;
espi->tx = 0;
@@ -546,83 +488,37 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
* fit into the FIFO and can be transferred with a single interrupt.
* So in these cases we will be using PIO and don't bother for DMA.
*/
- if (espi->dma_rx && t->len > SPI_FIFO_SIZE)
- ep93xx_spi_dma_transfer(espi);
- else
- ep93xx_spi_pio_transfer(espi);
+ if (espi->dma_rx && xfer->len > SPI_FIFO_SIZE)
+ return ep93xx_spi_dma_transfer(master);
- /*
- * In case of error during transmit, we bail out from processing
- * the message.
- */
- if (msg->status)
- return;
+ /* Using PIO so prime the TX FIFO and enable interrupts */
+ ep93xx_spi_read_write(master);
- msg->actual_length += t->len;
+ val = readl(espi->mmio + SSPCR1);
+ val |= (SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE);
+ writel(val, espi->mmio + SSPCR1);
- /*
- * After this transfer is finished, perform any possible
- * post-transfer actions requested by the protocol driver.
- */
- if (t->delay_usecs) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(usecs_to_jiffies(t->delay_usecs));
- }
- if (t->cs_change) {
- if (!list_is_last(&t->transfer_list, &msg->transfers)) {
- /*
- * In case protocol driver is asking us to drop the
- * chipselect briefly, we let the scheduler to handle
- * any "delay" here.
- */
- ep93xx_spi_cs_control(msg->spi, false);
- cond_resched();
- ep93xx_spi_cs_control(msg->spi, true);
- }
- }
+ /* signal that we need to wait for completion */
+ return 1;
}
-/*
- * ep93xx_spi_process_message() - process one SPI message
- * @espi: ep93xx SPI controller struct
- * @msg: message to process
- *
- * This function processes a single SPI message. We go through all transfers in
- * the message and pass them to ep93xx_spi_process_transfer(). Chipselect is
- * asserted during the whole message (unless per transfer cs_change is set).
- *
- * @msg->status contains %0 in case of success or negative error code in case of
- * failure.
- */
-static void ep93xx_spi_process_message(struct ep93xx_spi *espi,
- struct spi_message *msg)
+static int ep93xx_spi_prepare_message(struct spi_master *master,
+ struct spi_message *msg)
{
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
unsigned long timeout;
- struct spi_transfer *t;
- int err;
-
- /*
- * Enable the SPI controller and its clock.
- */
- err = ep93xx_spi_enable(espi);
- if (err) {
- dev_err(&espi->pdev->dev, "failed to enable SPI controller\n");
- msg->status = err;
- return;
- }
/*
* Just to be sure: flush any data from RX FIFO.
*/
timeout = jiffies + msecs_to_jiffies(SPI_TIMEOUT);
- while (ep93xx_spi_read_u16(espi, SSPSR) & SSPSR_RNE) {
+ while (readl(espi->mmio + SSPSR) & SSPSR_RNE) {
if (time_after(jiffies, timeout)) {
- dev_warn(&espi->pdev->dev,
+ dev_warn(&master->dev,
"timeout while flushing RX FIFO\n");
- msg->status = -ETIMEDOUT;
- return;
+ return -ETIMEDOUT;
}
- ep93xx_spi_read_u16(espi, SSPDR);
+ readl(espi->mmio + SSPDR);
}
/*
@@ -631,81 +527,38 @@ static void ep93xx_spi_process_message(struct ep93xx_spi *espi,
*/
espi->fifo_level = 0;
- /*
- * Assert the chipselect.
- */
- ep93xx_spi_cs_control(msg->spi, true);
-
- list_for_each_entry(t, &msg->transfers, transfer_list) {
- ep93xx_spi_process_transfer(espi, msg, t);
- if (msg->status)
- break;
- }
-
- /*
- * Now the whole message is transferred (or failed for some reason). We
- * deselect the device and disable the SPI controller.
- */
- ep93xx_spi_cs_control(msg->spi, false);
- ep93xx_spi_disable(espi);
+ return 0;
}
-static int ep93xx_spi_transfer_one_message(struct spi_master *master,
- struct spi_message *msg)
+static int ep93xx_spi_prepare_hardware(struct spi_master *master)
{
struct ep93xx_spi *espi = spi_master_get_devdata(master);
+ u32 val;
+ int ret;
- msg->state = NULL;
- msg->status = 0;
- msg->actual_length = 0;
-
- espi->current_msg = msg;
- ep93xx_spi_process_message(espi, msg);
- espi->current_msg = NULL;
+ ret = clk_enable(espi->clk);
+ if (ret)
+ return ret;
- spi_finalize_current_message(master);
+ val = readl(espi->mmio + SSPCR1);
+ val |= SSPCR1_SSE;
+ writel(val, espi->mmio + SSPCR1);
return 0;
}
-static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id)
+static int ep93xx_spi_unprepare_hardware(struct spi_master *master)
{
- struct ep93xx_spi *espi = dev_id;
- u8 irq_status = ep93xx_spi_read_u8(espi, SSPIIR);
+ struct ep93xx_spi *espi = spi_master_get_devdata(master);
+ u32 val;
- /*
- * If we got ROR (receive overrun) interrupt we know that something is
- * wrong. Just abort the message.
- */
- if (unlikely(irq_status & SSPIIR_RORIS)) {
- /* clear the overrun interrupt */
- ep93xx_spi_write_u8(espi, SSPICR, 0);
- dev_warn(&espi->pdev->dev,
- "receive overrun, aborting the message\n");
- espi->current_msg->status = -EIO;
- } else {
- /*
- * Interrupt is either RX (RIS) or TX (TIS). For both cases we
- * simply execute next data transfer.
- */
- if (ep93xx_spi_read_write(espi)) {
- /*
- * In normal case, there still is some processing left
- * for current transfer. Let's wait for the next
- * interrupt then.
- */
- return IRQ_HANDLED;
- }
- }
+ val = readl(espi->mmio + SSPCR1);
+ val &= ~SSPCR1_SSE;
+ writel(val, espi->mmio + SSPCR1);
- /*
- * Current transfer is finished, either with error or with success. In
- * any case we disable interrupts and notify the worker to handle
- * any post-processing of the message.
- */
- ep93xx_spi_disable_interrupts(espi);
- complete(&espi->wait);
- return IRQ_HANDLED;
+ clk_disable(espi->clk);
+
+ return 0;
}
static bool ep93xx_spi_dma_filter(struct dma_chan *chan, void *filter_param)
@@ -809,7 +662,10 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
if (!master)
return -ENOMEM;
- master->transfer_one_message = ep93xx_spi_transfer_one_message;
+ master->prepare_transfer_hardware = ep93xx_spi_prepare_hardware;
+ master->unprepare_transfer_hardware = ep93xx_spi_unprepare_hardware;
+ master->prepare_message = ep93xx_spi_prepare_message;
+ master->transfer_one = ep93xx_spi_transfer_one;
master->bus_num = pdev->id;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
@@ -850,26 +706,23 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
goto fail_release_master;
}
- init_completion(&espi->wait);
-
/*
* Calculate maximum and minimum supported clock rates
* for the controller.
*/
master->max_speed_hz = clk_get_rate(espi->clk) / 2;
master->min_speed_hz = clk_get_rate(espi->clk) / (254 * 256);
- espi->pdev = pdev;
espi->sspdr_phys = res->start + SSPDR;
- espi->regs_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(espi->regs_base)) {
- error = PTR_ERR(espi->regs_base);
+ espi->mmio = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(espi->mmio)) {
+ error = PTR_ERR(espi->mmio);
goto fail_release_master;
}
error = devm_request_irq(&pdev->dev, irq, ep93xx_spi_interrupt,
- 0, "ep93xx-spi", espi);
+ 0, "ep93xx-spi", master);
if (error) {
dev_err(&pdev->dev, "failed to request irq\n");
goto fail_release_master;
@@ -879,7 +732,7 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
dev_warn(&pdev->dev, "DMA setup failed. Falling back to PIO\n");
/* make sure that the hardware is disabled */
- ep93xx_spi_write_u8(espi, SSPCR1, 0);
+ writel(0, espi->mmio + SSPCR1);
error = devm_spi_register_master(&pdev->dev, master);
if (error) {
diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index 28fc9f161b9d..4b6dd73b80da 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -669,8 +669,8 @@ static int orion_spi_probe(struct platform_device *pdev)
status = of_property_read_u32(np, "reg", &cs);
if (status) {
dev_err(&pdev->dev,
- "%s has no valid 'reg' property (%d)\n",
- np->full_name, status);
+ "%pOF has no valid 'reg' property (%d)\n",
+ np, status);
status = 0;
continue;
}
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 4fcbb0aa71d3..cf8ee5e48f73 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -40,9 +40,13 @@
#include <linux/ioport.h>
#include <linux/acpi.h>
#include <linux/highmem.h>
+#include <linux/idr.h>
#define CREATE_TRACE_POINTS
#include <trace/events/spi.h>
+#define SPI_DYN_FIRST_BUS_NUM 0
+
+static DEFINE_IDR(spi_master_idr);
static void spidev_release(struct device *dev)
{
@@ -321,8 +325,7 @@ static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
if (rc != -ENODEV)
return rc;
- add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias);
- return 0;
+ return add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias);
}
struct bus_type spi_bus_type = {
@@ -421,6 +424,7 @@ static LIST_HEAD(spi_controller_list);
/*
* Used to protect add/del opertion for board_info list and
* spi_controller list, and their matching process
+ * also used to protect object of type struct idr
*/
static DEFINE_MUTEX(board_lock);
@@ -1533,15 +1537,15 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
int rc;
/* Mode (clock phase/polarity/etc.) */
- if (of_find_property(nc, "spi-cpha", NULL))
+ if (of_property_read_bool(nc, "spi-cpha"))
spi->mode |= SPI_CPHA;
- if (of_find_property(nc, "spi-cpol", NULL))
+ if (of_property_read_bool(nc, "spi-cpol"))
spi->mode |= SPI_CPOL;
- if (of_find_property(nc, "spi-cs-high", NULL))
+ if (of_property_read_bool(nc, "spi-cs-high"))
spi->mode |= SPI_CS_HIGH;
- if (of_find_property(nc, "spi-3wire", NULL))
+ if (of_property_read_bool(nc, "spi-3wire"))
spi->mode |= SPI_3WIRE;
- if (of_find_property(nc, "spi-lsb-first", NULL))
+ if (of_property_read_bool(nc, "spi-lsb-first"))
spi->mode |= SPI_LSB_FIRST;
/* Device DUAL/QUAD mode */
@@ -1583,8 +1587,8 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
if (spi_controller_is_slave(ctlr)) {
if (strcmp(nc->name, "slave")) {
- dev_err(&ctlr->dev, "%s is not called 'slave'\n",
- nc->full_name);
+ dev_err(&ctlr->dev, "%pOF is not called 'slave'\n",
+ nc);
return -EINVAL;
}
return 0;
@@ -1593,8 +1597,8 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
/* Device address */
rc = of_property_read_u32(nc, "reg", &value);
if (rc) {
- dev_err(&ctlr->dev, "%s has no valid 'reg' property (%d)\n",
- nc->full_name, rc);
+ dev_err(&ctlr->dev, "%pOF has no valid 'reg' property (%d)\n",
+ nc, rc);
return rc;
}
spi->chip_select = value;
@@ -1603,8 +1607,7 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
rc = of_property_read_u32(nc, "spi-max-frequency", &value);
if (rc) {
dev_err(&ctlr->dev,
- "%s has no valid 'spi-max-frequency' property (%d)\n",
- nc->full_name, rc);
+ "%pOF has no valid 'spi-max-frequency' property (%d)\n", nc, rc);
return rc;
}
spi->max_speed_hz = value;
@@ -1621,8 +1624,7 @@ of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc)
/* Alloc an spi_device */
spi = spi_alloc_device(ctlr);
if (!spi) {
- dev_err(&ctlr->dev, "spi_device alloc error for %s\n",
- nc->full_name);
+ dev_err(&ctlr->dev, "spi_device alloc error for %pOF\n", nc);
rc = -ENOMEM;
goto err_out;
}
@@ -1631,8 +1633,7 @@ of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc)
rc = of_modalias_node(nc, spi->modalias,
sizeof(spi->modalias));
if (rc < 0) {
- dev_err(&ctlr->dev, "cannot find modalias for %s\n",
- nc->full_name);
+ dev_err(&ctlr->dev, "cannot find modalias for %pOF\n", nc);
goto err_out;
}
@@ -1647,8 +1648,7 @@ of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc)
/* Register the new device */
rc = spi_add_device(spi);
if (rc) {
- dev_err(&ctlr->dev, "spi_device register error %s\n",
- nc->full_name);
+ dev_err(&ctlr->dev, "spi_device register error %pOF\n", nc);
goto err_of_node_put;
}
@@ -1682,8 +1682,7 @@ static void of_register_spi_devices(struct spi_controller *ctlr)
spi = of_register_spi_device(ctlr, nc);
if (IS_ERR(spi)) {
dev_warn(&ctlr->dev,
- "Failed to create SPI device for %s\n",
- nc->full_name);
+ "Failed to create SPI device for %pOF\n", nc);
of_node_clear_flag(nc, OF_POPULATED);
}
}
@@ -2052,11 +2051,10 @@ static int of_spi_register_master(struct spi_controller *ctlr)
*/
int spi_register_controller(struct spi_controller *ctlr)
{
- static atomic_t dyn_bus_id = ATOMIC_INIT((1<<15) - 1);
struct device *dev = ctlr->dev.parent;
struct boardinfo *bi;
int status = -ENODEV;
- int dynamic = 0;
+ int id;
if (!dev)
return -ENODEV;
@@ -2072,19 +2070,28 @@ int spi_register_controller(struct spi_controller *ctlr)
*/
if (ctlr->num_chipselect == 0)
return -EINVAL;
-
- if ((ctlr->bus_num < 0) && ctlr->dev.of_node)
- ctlr->bus_num = of_alias_get_id(ctlr->dev.of_node, "spi");
-
- /* convention: dynamically assigned bus IDs count down from the max */
+ /* allocate dynamic bus number using Linux idr */
+ if ((ctlr->bus_num < 0) && ctlr->dev.of_node) {
+ id = of_alias_get_id(ctlr->dev.of_node, "spi");
+ if (id >= 0) {
+ ctlr->bus_num = id;
+ mutex_lock(&board_lock);
+ id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num,
+ ctlr->bus_num + 1, GFP_KERNEL);
+ mutex_unlock(&board_lock);
+ if (WARN(id < 0, "couldn't get idr"))
+ return id == -ENOSPC ? -EBUSY : id;
+ }
+ }
if (ctlr->bus_num < 0) {
- /* FIXME switch to an IDR based scheme, something like
- * I2C now uses, so we can't run out of "dynamic" IDs
- */
- ctlr->bus_num = atomic_dec_return(&dyn_bus_id);
- dynamic = 1;
+ mutex_lock(&board_lock);
+ id = idr_alloc(&spi_master_idr, ctlr, SPI_DYN_FIRST_BUS_NUM, 0,
+ GFP_KERNEL);
+ mutex_unlock(&board_lock);
+ if (WARN(id < 0, "couldn't get idr"))
+ return id;
+ ctlr->bus_num = id;
}
-
INIT_LIST_HEAD(&ctlr->queue);
spin_lock_init(&ctlr->queue_lock);
spin_lock_init(&ctlr->bus_lock_spinlock);
@@ -2100,11 +2107,16 @@ int spi_register_controller(struct spi_controller *ctlr)
*/
dev_set_name(&ctlr->dev, "spi%u", ctlr->bus_num);
status = device_add(&ctlr->dev);
- if (status < 0)
+ if (status < 0) {
+ /* free bus id */
+ mutex_lock(&board_lock);
+ idr_remove(&spi_master_idr, ctlr->bus_num);
+ mutex_unlock(&board_lock);
goto done;
- dev_dbg(dev, "registered %s %s%s\n",
+ }
+ dev_dbg(dev, "registered %s %s\n",
spi_controller_is_slave(ctlr) ? "slave" : "master",
- dev_name(&ctlr->dev), dynamic ? " (dynamic)" : "");
+ dev_name(&ctlr->dev));
/* If we're using a queued driver, start the queue */
if (ctlr->transfer)
@@ -2113,6 +2125,10 @@ int spi_register_controller(struct spi_controller *ctlr)
status = spi_controller_initialize_queue(ctlr);
if (status) {
device_del(&ctlr->dev);
+ /* free bus id */
+ mutex_lock(&board_lock);
+ idr_remove(&spi_master_idr, ctlr->bus_num);
+ mutex_unlock(&board_lock);
goto done;
}
}
@@ -2191,19 +2207,33 @@ static int __unregister(struct device *dev, void *null)
*/
void spi_unregister_controller(struct spi_controller *ctlr)
{
+ struct spi_controller *found;
int dummy;
+ /* First make sure that this controller was ever added */
+ mutex_lock(&board_lock);
+ found = idr_find(&spi_master_idr, ctlr->bus_num);
+ mutex_unlock(&board_lock);
+ if (found != ctlr) {
+ dev_dbg(&ctlr->dev,
+ "attempting to delete unregistered controller [%s]\n",
+ dev_name(&ctlr->dev));
+ return;
+ }
if (ctlr->queued) {
if (spi_destroy_queue(ctlr))
dev_err(&ctlr->dev, "queue remove failed\n");
}
-
mutex_lock(&board_lock);
list_del(&ctlr->list);
mutex_unlock(&board_lock);
dummy = device_for_each_child(&ctlr->dev, NULL, __unregister);
device_unregister(&ctlr->dev);
+ /* free bus id */
+ mutex_lock(&board_lock);
+ idr_remove(&spi_master_idr, ctlr->bus_num);
+ mutex_unlock(&board_lock);
}
EXPORT_SYMBOL_GPL(spi_unregister_controller);
@@ -3311,8 +3341,8 @@ static int of_spi_notify(struct notifier_block *nb, unsigned long action,
put_device(&ctlr->dev);
if (IS_ERR(spi)) {
- pr_err("%s: failed to create for '%s'\n",
- __func__, rd->dn->full_name);
+ pr_err("%s: failed to create for '%pOF'\n",
+ __func__, rd->dn);
of_node_clear_flag(rd->dn, OF_POPULATED);
return notifier_from_errno(PTR_ERR(spi));
}