diff options
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/spi/spi-altera.c | 163 | ||||
| -rw-r--r-- | drivers/spi/spi-ath79.c | 13 | ||||
| -rw-r--r-- | drivers/spi/spi-bcm-qspi.c | 89 | ||||
| -rw-r--r-- | drivers/spi/spi-bcm63xx-hsspi.c | 10 | ||||
| -rw-r--r-- | drivers/spi/spi-bcm63xx.c | 4 | ||||
| -rw-r--r-- | drivers/spi/spi-ep93xx.c | 501 | ||||
| -rw-r--r-- | drivers/spi/spi-falcon.c | 5 | ||||
| -rw-r--r-- | drivers/spi/spi-orion.c | 4 | ||||
| -rw-r--r-- | drivers/spi/spi.c | 110 |
10 files changed, 354 insertions, 546 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 9b31351fe429..acf566f06241 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -55,7 +55,6 @@ comment "SPI Master Controller Drivers" config SPI_ALTERA tristate "Altera SPI Controller" - select SPI_BITBANG help This is the driver for the Altera SPI Controller. diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c index b95010e72452..a5adf0d868fc 100644 --- a/drivers/spi/spi-altera.c +++ b/drivers/spi/spi-altera.c @@ -18,7 +18,6 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> -#include <linux/spi/spi_bitbang.h> #include <linux/io.h> #include <linux/of.h> @@ -45,10 +44,6 @@ #define ALTERA_SPI_CONTROL_SSO_MSK 0x400 struct altera_spi { - /* bitbang has to be first */ - struct spi_bitbang bitbang; - struct completion done; - void __iomem *base; int irq; int len; @@ -66,59 +61,64 @@ static inline struct altera_spi *altera_spi_to_hw(struct spi_device *sdev) return spi_master_get_devdata(sdev->master); } -static void altera_spi_chipsel(struct spi_device *spi, int value) +static void altera_spi_set_cs(struct spi_device *spi, bool is_high) { struct altera_spi *hw = altera_spi_to_hw(spi); - if (spi->mode & SPI_CS_HIGH) { - switch (value) { - case BITBANG_CS_INACTIVE: - writel(1 << spi->chip_select, - hw->base + ALTERA_SPI_SLAVE_SEL); - hw->imr |= ALTERA_SPI_CONTROL_SSO_MSK; - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); - break; - - case BITBANG_CS_ACTIVE: - hw->imr &= ~ALTERA_SPI_CONTROL_SSO_MSK; - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); - writel(0, hw->base + ALTERA_SPI_SLAVE_SEL); - break; - } + if (is_high) { + hw->imr &= ~ALTERA_SPI_CONTROL_SSO_MSK; + writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); + writel(0, hw->base + ALTERA_SPI_SLAVE_SEL); } else { - switch (value) { - case BITBANG_CS_INACTIVE: - hw->imr &= ~ALTERA_SPI_CONTROL_SSO_MSK; - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); - break; + writel(BIT(spi->chip_select), hw->base + ALTERA_SPI_SLAVE_SEL); + hw->imr |= ALTERA_SPI_CONTROL_SSO_MSK; + writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); + } +} + +static void altera_spi_tx_word(struct altera_spi *hw) +{ + unsigned int txd = 0; - case BITBANG_CS_ACTIVE: - writel(1 << spi->chip_select, - hw->base + ALTERA_SPI_SLAVE_SEL); - hw->imr |= ALTERA_SPI_CONTROL_SSO_MSK; - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); + if (hw->tx) { + switch (hw->bytes_per_word) { + case 1: + txd = hw->tx[hw->count]; + break; + case 2: + txd = (hw->tx[hw->count * 2] + | (hw->tx[hw->count * 2 + 1] << 8)); break; } } + + writel(txd, hw->base + ALTERA_SPI_TXDATA); } -static inline unsigned int hw_txbyte(struct altera_spi *hw, int count) +static void altera_spi_rx_word(struct altera_spi *hw) { - if (hw->tx) { + unsigned int rxd; + + rxd = readl(hw->base + ALTERA_SPI_RXDATA); + if (hw->rx) { switch (hw->bytes_per_word) { case 1: - return hw->tx[count]; + hw->rx[hw->count] = rxd; + break; case 2: - return (hw->tx[count * 2] - | (hw->tx[count * 2 + 1] << 8)); + hw->rx[hw->count * 2] = rxd; + hw->rx[hw->count * 2 + 1] = rxd >> 8; + break; } } - return 0; + + hw->count++; } -static int altera_spi_txrx(struct spi_device *spi, struct spi_transfer *t) +static int altera_spi_txrx(struct spi_master *master, + struct spi_device *spi, struct spi_transfer *t) { - struct altera_spi *hw = altera_spi_to_hw(spi); + struct altera_spi *hw = spi_master_get_devdata(master); hw->tx = t->tx_buf; hw->rx = t->rx_buf; @@ -132,67 +132,39 @@ static int altera_spi_txrx(struct spi_device *spi, struct spi_transfer *t) writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); /* send the first byte */ - writel(hw_txbyte(hw, 0), hw->base + ALTERA_SPI_TXDATA); - - wait_for_completion(&hw->done); - /* disable receive interrupt */ - hw->imr &= ~ALTERA_SPI_CONTROL_IRRDY_MSK; - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); + altera_spi_tx_word(hw); } else { while (hw->count < hw->len) { - unsigned int rxd; - - writel(hw_txbyte(hw, hw->count), - hw->base + ALTERA_SPI_TXDATA); + altera_spi_tx_word(hw); while (!(readl(hw->base + ALTERA_SPI_STATUS) & ALTERA_SPI_STATUS_RRDY_MSK)) cpu_relax(); - rxd = readl(hw->base + ALTERA_SPI_RXDATA); - if (hw->rx) { - switch (hw->bytes_per_word) { - case 1: - hw->rx[hw->count] = rxd; - break; - case 2: - hw->rx[hw->count * 2] = rxd; - hw->rx[hw->count * 2 + 1] = rxd >> 8; - break; - } - } - - hw->count++; + altera_spi_rx_word(hw); } + spi_finalize_current_transfer(master); } - return hw->count * hw->bytes_per_word; + return t->len; } static irqreturn_t altera_spi_irq(int irq, void *dev) { - struct altera_spi *hw = dev; - unsigned int rxd; + struct spi_master *master = dev; + struct altera_spi *hw = spi_master_get_devdata(master); - rxd = readl(hw->base + ALTERA_SPI_RXDATA); - if (hw->rx) { - switch (hw->bytes_per_word) { - case 1: - hw->rx[hw->count] = rxd; - break; - case 2: - hw->rx[hw->count * 2] = rxd; - hw->rx[hw->count * 2 + 1] = rxd >> 8; - break; - } - } + altera_spi_rx_word(hw); - hw->count++; + if (hw->count < hw->len) { + altera_spi_tx_word(hw); + } else { + /* disable receive interrupt */ + hw->imr &= ~ALTERA_SPI_CONTROL_IRRDY_MSK; + writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); - if (hw->count < hw->len) - writel(hw_txbyte(hw, hw->count), hw->base + ALTERA_SPI_TXDATA); - else - complete(&hw->done); + spi_finalize_current_transfer(master); + } return IRQ_HANDLED; } @@ -214,14 +186,10 @@ static int altera_spi_probe(struct platform_device *pdev) master->mode_bits = SPI_CS_HIGH; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16); master->dev.of_node = pdev->dev.of_node; + master->transfer_one = altera_spi_txrx; + master->set_cs = altera_spi_set_cs; hw = spi_master_get_devdata(master); - platform_set_drvdata(pdev, hw); - - /* setup the state for the bitbang driver */ - hw->bitbang.master = master; - hw->bitbang.chipselect = altera_spi_chipsel; - hw->bitbang.txrx_bufs = altera_spi_txrx; /* find and map our resources */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -239,15 +207,13 @@ static int altera_spi_probe(struct platform_device *pdev) /* irq is optional */ hw->irq = platform_get_irq(pdev, 0); if (hw->irq >= 0) { - init_completion(&hw->done); err = devm_request_irq(&pdev->dev, hw->irq, altera_spi_irq, 0, - pdev->name, hw); + pdev->name, master); if (err) goto exit; } - /* register our spi controller */ - err = spi_bitbang_start(&hw->bitbang); + err = devm_spi_register_master(&pdev->dev, master); if (err) goto exit; dev_info(&pdev->dev, "base %p, irq %d\n", hw->base, hw->irq); @@ -258,16 +224,6 @@ exit: return err; } -static int altera_spi_remove(struct platform_device *dev) -{ - struct altera_spi *hw = platform_get_drvdata(dev); - struct spi_master *master = hw->bitbang.master; - - spi_bitbang_stop(&hw->bitbang); - spi_master_put(master); - return 0; -} - #ifdef CONFIG_OF static const struct of_device_id altera_spi_match[] = { { .compatible = "ALTR,spi-1.0", }, @@ -279,7 +235,6 @@ MODULE_DEVICE_TABLE(of, altera_spi_match); static struct platform_driver altera_spi_driver = { .probe = altera_spi_probe, - .remove = altera_spi_remove, .driver = { .name = DRV_NAME, .pm = NULL, diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c index b89cee11f418..0719bd484891 100644 --- a/drivers/spi/spi-ath79.c +++ b/drivers/spi/spi-ath79.c @@ -39,15 +39,15 @@ struct ath79_spi { u32 reg_ctrl; void __iomem *base; struct clk *clk; - unsigned rrw_delay; + unsigned int rrw_delay; }; -static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned reg) +static inline u32 ath79_spi_rr(struct ath79_spi *sp, unsigned int reg) { return ioread32(sp->base + reg); } -static inline void ath79_spi_wr(struct ath79_spi *sp, unsigned reg, u32 val) +static inline void ath79_spi_wr(struct ath79_spi *sp, unsigned int reg, u32 val) { iowrite32(val, sp->base + reg); } @@ -57,7 +57,7 @@ static inline struct ath79_spi *ath79_spidev_to_sp(struct spi_device *spi) return spi_master_get_devdata(spi->master); } -static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned nsecs) +static inline void ath79_spi_delay(struct ath79_spi *sp, unsigned int nsecs) { if (nsecs > sp->rrw_delay) ndelay(nsecs - sp->rrw_delay); @@ -148,9 +148,8 @@ static int ath79_spi_setup_cs(struct spi_device *spi) static void ath79_spi_cleanup_cs(struct spi_device *spi) { - if (gpio_is_valid(spi->cs_gpio)) { + if (gpio_is_valid(spi->cs_gpio)) gpio_free(spi->cs_gpio); - } } static int ath79_spi_setup(struct spi_device *spi) @@ -176,7 +175,7 @@ static void ath79_spi_cleanup(struct spi_device *spi) spi_bitbang_cleanup(spi); } -static u32 ath79_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs, +static u32 ath79_spi_txrx_mode0(struct spi_device *spi, unsigned int nsecs, u32 word, u8 bits) { struct ath79_spi *sp = ath79_spidev_to_sp(spi); diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c index b19722ba908c..6ef6c44f39f5 100644 --- a/drivers/spi/spi-bcm-qspi.c +++ b/drivers/spi/spi-bcm-qspi.c @@ -25,7 +25,6 @@ #include <linux/ioport.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/mtd/spi-nor.h> #include <linux/of.h> #include <linux/of_irq.h> #include <linux/platform_device.h> @@ -349,76 +348,60 @@ static void bcm_qspi_bspi_set_xfer_params(struct bcm_qspi *qspi, u8 cmd_byte, bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, flex_mode); } -static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width, - int addrlen, int hp) +static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, + struct spi_flash_read_message *msg, + int hp) { int bpc = 0, bpp = 0; - u8 command = SPINOR_OP_READ_FAST; - int flex_mode = 1, rv = 0; - bool spans_4byte = false; + u8 command = msg->read_opcode; + int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE; + int addrlen = msg->addr_width; + int addr_nbits = msg->addr_nbits ? msg->addr_nbits : SPI_NBITS_SINGLE; + int flex_mode = 1; dev_dbg(&qspi->pdev->dev, "set flex mode w %x addrlen %x hp %d\n", width, addrlen, hp); - if (addrlen == BSPI_ADDRLEN_4BYTES) { + if (addrlen == BSPI_ADDRLEN_4BYTES) bpp = BSPI_BPP_ADDR_SELECT_MASK; - spans_4byte = true; - } - bpp |= 8; + bpp |= msg->dummy_bytes * (8/addr_nbits); switch (width) { case SPI_NBITS_SINGLE: if (addrlen == BSPI_ADDRLEN_3BYTES) /* default mode, does not need flex_cmd */ flex_mode = 0; - else - command = SPINOR_OP_READ_FAST_4B; break; case SPI_NBITS_DUAL: bpc = 0x00000001; if (hp) { bpc |= 0x00010100; /* address and mode are 2-bit */ bpp = BSPI_BPP_MODE_SELECT_MASK; - command = OPCODE_DIOR; - if (spans_4byte) - command = OPCODE_DIOR_4B; - } else { - command = SPINOR_OP_READ_1_1_2; - if (spans_4byte) - command = SPINOR_OP_READ_1_1_2_4B; } break; case SPI_NBITS_QUAD: bpc = 0x00000002; if (hp) { bpc |= 0x00020200; /* address and mode are 4-bit */ - bpp = 4; /* dummy cycles */ - bpp |= BSPI_BPP_ADDR_SELECT_MASK; - command = OPCODE_QIOR; - if (spans_4byte) - command = OPCODE_QIOR_4B; - } else { - command = SPINOR_OP_READ_1_1_4; - if (spans_4byte) - command = SPINOR_OP_READ_1_1_4_4B; + bpp |= BSPI_BPP_MODE_SELECT_MASK; } break; default: - rv = -EINVAL; - break; + return -EINVAL; } - if (rv == 0) - bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc, - flex_mode); + bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc, flex_mode); - return rv; + return 0; } -static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width, - int addrlen, int hp) +static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, + struct spi_flash_read_message *msg, + int hp) { + int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE; + int addrlen = msg->addr_width; u32 data = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL); dev_dbg(&qspi->pdev->dev, "set override mode w %x addrlen %x hp %d\n", @@ -430,7 +413,6 @@ static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width, data &= ~(BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD | BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL); break; - case SPI_NBITS_QUAD: /* clear dual mode and set quad mode */ data &= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL; @@ -455,15 +437,17 @@ static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width, /* set the override mode */ data |= BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE; bcm_qspi_write(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL, data); - bcm_qspi_bspi_set_xfer_params(qspi, SPINOR_OP_READ_FAST, 0, 0, 0); + bcm_qspi_bspi_set_xfer_params(qspi, msg->read_opcode, 0, 0, 0); return 0; } static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi, - int width, int addrlen, int hp) + struct spi_flash_read_message *msg, int hp) { int error = 0; + int width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE; + int addrlen = msg->addr_width; /* default mode */ qspi->xfer_mode.flex_mode = true; @@ -475,23 +459,13 @@ static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi, mask = BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE; if (val & mask || qspi->s3_strap_override_ctrl & mask) { qspi->xfer_mode.flex_mode = false; - bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, - 0); - - if ((val | qspi->s3_strap_override_ctrl) & - BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL) - width = SPI_NBITS_DUAL; - else if ((val | qspi->s3_strap_override_ctrl) & - BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD) - width = SPI_NBITS_QUAD; - - error = bcm_qspi_bspi_set_override(qspi, width, addrlen, - hp); + bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, 0); + error = bcm_qspi_bspi_set_override(qspi, msg, hp); } } if (qspi->xfer_mode.flex_mode) - error = bcm_qspi_bspi_set_flex_mode(qspi, width, addrlen, hp); + error = bcm_qspi_bspi_set_flex_mode(qspi, msg, hp); if (error) { dev_warn(&qspi->pdev->dev, @@ -981,7 +955,7 @@ static int bcm_qspi_flash_read(struct spi_device *spi, struct bcm_qspi *qspi = spi_master_get_devdata(spi->master); int ret = 0; bool mspi_read = false; - u32 io_width, addrlen, addr, len; + u32 addr, len; u_char *buf; buf = msg->buf; @@ -1010,9 +984,7 @@ static int bcm_qspi_flash_read(struct spi_device *spi, if (mspi_read) return bcm_qspi_mspi_flash_read(spi, msg); - io_width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE; - addrlen = msg->addr_width; - ret = bcm_qspi_bspi_set_mode(qspi, io_width, addrlen, -1); + ret = bcm_qspi_bspi_set_mode(qspi, msg, -1); if (!ret) ret = bcm_qspi_bspi_flash_read(spi, msg); @@ -1422,6 +1394,11 @@ static int __maybe_unused bcm_qspi_suspend(struct device *dev) { struct bcm_qspi *qspi = dev_get_drvdata(dev); + /* store the override strap value */ + if (!bcm_qspi_bspi_ver_three(qspi)) + qspi->s3_strap_override_ctrl = + bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL); + spi_master_suspend(qspi->master); clk_disable(qspi->clk); bcm_qspi_hw_uninit(qspi); diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c index 4da2d4a524ca..cbcba614b253 100644 --- a/drivers/spi/spi-bcm63xx-hsspi.c +++ b/drivers/spi/spi-bcm63xx-hsspi.c @@ -108,7 +108,7 @@ struct bcm63xx_hsspi { u8 cs_polarity; }; -static void bcm63xx_hsspi_set_cs(struct bcm63xx_hsspi *bs, unsigned cs, +static void bcm63xx_hsspi_set_cs(struct bcm63xx_hsspi *bs, unsigned int cs, bool active) { u32 reg; @@ -127,7 +127,7 @@ static void bcm63xx_hsspi_set_cs(struct bcm63xx_hsspi *bs, unsigned cs, static void bcm63xx_hsspi_set_clk(struct bcm63xx_hsspi *bs, struct spi_device *spi, int hz) { - unsigned profile = spi->chip_select; + unsigned int profile = spi->chip_select; u32 reg; reg = DIV_ROUND_UP(2048, DIV_ROUND_UP(bs->speed_hz, hz)); @@ -154,7 +154,7 @@ static void bcm63xx_hsspi_set_clk(struct bcm63xx_hsspi *bs, static int bcm63xx_hsspi_do_txrx(struct spi_device *spi, struct spi_transfer *t) { struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master); - unsigned chip_select = spi->chip_select; + unsigned int chip_select = spi->chip_select; u16 opcode = 0; int pending = t->len; int step_size = HSSPI_BUFFER_LEN; @@ -338,8 +338,8 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { - dev_err(dev, "no irq\n"); - return -ENXIO; + dev_err(dev, "no irq: %d\n", irq); + return irq; } res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 84c7356ce5b4..bfe5754768f9 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -530,8 +530,8 @@ static int bcm63xx_spi_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { - dev_err(dev, "no irq\n"); - return -ENXIO; + dev_err(dev, "no irq: %d\n", irq); + return irq; } clk = devm_clk_get(dev, "spi"); diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index b5d766064b7b..e5cc07357746 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -70,12 +70,9 @@ /** * struct ep93xx_spi - EP93xx SPI controller structure - * @pdev: pointer to platform device * @clk: clock for the controller - * @regs_base: pointer to ioremap()'d registers + * @mmio: pointer to ioremap()'d registers * @sspdr_phys: physical address of the SSPDR register - * @wait: wait here until given transfer is completed - * @current_msg: message that is currently processed (or %NULL if none) * @tx: current byte in transfer to transmit * @rx: current byte in transfer to receive * @fifo_level: how full is FIFO (%0..%SPI_FIFO_SIZE - %1). Receiving one @@ -90,12 +87,9 @@ * the client */ struct ep93xx_spi { - const struct platform_device *pdev; struct clk *clk; - void __iomem *regs_base; + void __iomem *mmio; unsigned long sspdr_phys; - struct completion wait; - struct spi_message *current_msg; size_t tx; size_t rx; size_t fifo_level; @@ -111,91 +105,23 @@ struct ep93xx_spi { /* converts bits per word to CR0.DSS value */ #define bits_per_word_to_dss(bpw) ((bpw) - 1) -static void ep93xx_spi_write_u8(const struct ep93xx_spi *espi, - u16 reg, u8 value) -{ - writeb(value, espi->regs_base + reg); -} - -static u8 ep93xx_spi_read_u8(const struct ep93xx_spi *spi, u16 reg) -{ - return readb(spi->regs_base + reg); -} - -static void ep93xx_spi_write_u16(const struct ep93xx_spi *espi, - u16 reg, u16 value) -{ - writew(value, espi->regs_base + reg); -} - -static u16 ep93xx_spi_read_u16(const struct ep93xx_spi *spi, u16 reg) -{ - return readw(spi->regs_base + reg); -} - -static int ep93xx_spi_enable(const struct ep93xx_spi *espi) -{ - u8 regval; - int err; - - err = clk_enable(espi->clk); - if (err) - return err; - - regval = ep93xx_spi_read_u8(espi, SSPCR1); - regval |= SSPCR1_SSE; - ep93xx_spi_write_u8(espi, SSPCR1, regval); - - return 0; -} - -static void ep93xx_spi_disable(const struct ep93xx_spi *espi) -{ - u8 regval; - - regval = ep93xx_spi_read_u8(espi, SSPCR1); - regval &= ~SSPCR1_SSE; - ep93xx_spi_write_u8(espi, SSPCR1, regval); - - clk_disable(espi->clk); -} - -static void ep93xx_spi_enable_interrupts(const struct ep93xx_spi *espi) -{ - u8 regval; - - regval = ep93xx_spi_read_u8(espi, SSPCR1); - regval |= (SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE); - ep93xx_spi_write_u8(espi, SSPCR1, regval); -} - -static void ep93xx_spi_disable_interrupts(const struct ep93xx_spi *espi) -{ - u8 regval; - - regval = ep93xx_spi_read_u8(espi, SSPCR1); - regval &= ~(SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE); - ep93xx_spi_write_u8(espi, SSPCR1, regval); -} - /** * ep93xx_spi_calc_divisors() - calculates SPI clock divisors - * @espi: ep93xx SPI controller struct + * @master: SPI master * @rate: desired SPI output clock rate * @div_cpsr: pointer to return the cpsr (pre-scaler) divider * @div_scr: pointer to return the scr divider */ -static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi, +static int ep93xx_spi_calc_divisors(struct spi_master *master, u32 rate, u8 *div_cpsr, u8 *div_scr) { - struct spi_master *master = platform_get_drvdata(espi->pdev); + struct ep93xx_spi *espi = spi_master_get_devdata(master); unsigned long spi_clk_rate = clk_get_rate(espi->clk); int cpsr, scr; /* * Make sure that max value is between values supported by the - * controller. Note that minimum value is already checked in - * ep93xx_spi_transfer_one_message(). + * controller. */ rate = clamp(rate, master->min_speed_hz, master->max_speed_hz); @@ -220,26 +146,18 @@ static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi, return -EINVAL; } -static void ep93xx_spi_cs_control(struct spi_device *spi, bool enable) -{ - if (spi->mode & SPI_CS_HIGH) - enable = !enable; - - if (gpio_is_valid(spi->cs_gpio)) - gpio_set_value(spi->cs_gpio, !enable); -} - -static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi, +static int ep93xx_spi_chip_setup(struct spi_master *master, struct spi_device *spi, struct spi_transfer *xfer) { + struct ep93xx_spi *espi = spi_master_get_devdata(master); u8 dss = bits_per_word_to_dss(xfer->bits_per_word); u8 div_cpsr = 0; u8 div_scr = 0; u16 cr0; int err; - err = ep93xx_spi_calc_divisors(espi, xfer->speed_hz, + err = ep93xx_spi_calc_divisors(master, xfer->speed_hz, &div_cpsr, &div_scr); if (err) return err; @@ -248,51 +166,49 @@ static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi, cr0 |= (spi->mode & (SPI_CPHA | SPI_CPOL)) << SSPCR0_MODE_SHIFT; cr0 |= dss; - dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n", + dev_dbg(&master->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n", spi->mode, div_cpsr, div_scr, dss); - dev_dbg(&espi->pdev->dev, "setup: cr0 %#x\n", cr0); + dev_dbg(&master->dev, "setup: cr0 %#x\n", cr0); - ep93xx_spi_write_u8(espi, SSPCPSR, div_cpsr); - ep93xx_spi_write_u16(espi, SSPCR0, cr0); + writel(div_cpsr, espi->mmio + SSPCPSR); + writel(cr0, espi->mmio + SSPCR0); return 0; } -static void ep93xx_do_write(struct ep93xx_spi *espi, struct spi_transfer *t) +static void ep93xx_do_write(struct spi_master *master) { - if (t->bits_per_word > 8) { - u16 tx_val = 0; + struct ep93xx_spi *espi = spi_master_get_devdata(master); + struct spi_transfer *xfer = master->cur_msg->state; + u32 val = 0; - if (t->tx_buf) - tx_val = ((u16 *)t->tx_buf)[espi->tx]; - ep93xx_spi_write_u16(espi, SSPDR, tx_val); - espi->tx += sizeof(tx_val); + if (xfer->bits_per_word > 8) { + if (xfer->tx_buf) + val = ((u16 *)xfer->tx_buf)[espi->tx]; + espi->tx += 2; } else { - u8 tx_val = 0; - - if (t->tx_buf) - tx_val = ((u8 *)t->tx_buf)[espi->tx]; - ep93xx_spi_write_u8(espi, SSPDR, tx_val); - espi->tx += sizeof(tx_val); + if (xfer->tx_buf) + val = ((u8 *)xfer->tx_buf)[espi->tx]; + espi->tx += 1; } + writel(val, espi->mmio + SSPDR); } -static void ep93xx_do_read(struct ep93xx_spi *espi, struct spi_transfer *t) +static void ep93xx_do_read(struct spi_master *master) { - if (t->bits_per_word > 8) { - u16 rx_val; - - rx_val = ep93xx_spi_read_u16(espi, SSPDR); - if (t->rx_buf) - ((u16 *)t->rx_buf)[espi->rx] = rx_val; - espi->rx += sizeof(rx_val); + struct ep93xx_spi *espi = spi_master_get_devdata(master); + struct spi_transfer *xfer = master->cur_msg->state; + u32 val; + + val = readl(espi->mmio + SSPDR); + if (xfer->bits_per_word > 8) { + if (xfer->rx_buf) + ((u16 *)xfer->rx_buf)[espi->rx] = val; + espi->rx += 2; } else { - u8 rx_val; - - rx_val = ep93xx_spi_read_u8(espi, SSPDR); - if (t->rx_buf) - ((u8 *)t->rx_buf)[espi->rx] = rx_val; - espi->rx += sizeof(rx_val); + if (xfer->rx_buf) + ((u8 *)xfer->rx_buf)[espi->rx] = val; + espi->rx += 1; } } @@ -307,44 +223,32 @@ static void ep93xx_do_read(struct ep93xx_spi *espi, struct spi_transfer *t) * When this function is finished, RX FIFO should be empty and TX FIFO should be * full. */ -static int ep93xx_spi_read_write(struct ep93xx_spi *espi) +static int ep93xx_spi_read_write(struct spi_master *master) { - struct spi_message *msg = espi->current_msg; - struct spi_transfer *t = msg->state; + struct ep93xx_spi *espi = spi_master_get_devdata(master); + struct spi_transfer *xfer = master->cur_msg->state; /* read as long as RX FIFO has frames in it */ - while ((ep93xx_spi_read_u8(espi, SSPSR) & SSPSR_RNE)) { - ep93xx_do_read(espi, t); + while ((readl(espi->mmio + SSPSR) & SSPSR_RNE)) { + ep93xx_do_read(master); espi->fifo_level--; } /* write as long as TX FIFO has room */ - while (espi->fifo_level < SPI_FIFO_SIZE && espi->tx < t->len) { - ep93xx_do_write(espi, t); + while (espi->fifo_level < SPI_FIFO_SIZE && espi->tx < xfer->len) { + ep93xx_do_write(master); espi->fifo_level++; } - if (espi->rx == t->len) + if (espi->rx == xfer->len) return 0; return -EINPROGRESS; } -static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi) -{ - /* - * Now everything is set up for the current transfer. We prime the TX - * FIFO, enable interrupts, and wait for the transfer to complete. - */ - if (ep93xx_spi_read_write(espi)) { - ep93xx_spi_enable_interrupts(espi); - wait_for_completion(&espi->wait); - } -} - /** * ep93xx_spi_dma_prepare() - prepares a DMA transfer - * @espi: ep93xx SPI controller struct + * @master: SPI master * @dir: DMA transfer direction * * Function configures the DMA, maps the buffer and prepares the DMA @@ -352,9 +256,11 @@ static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi) * in case of failure. */ static struct dma_async_tx_descriptor * -ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir) +ep93xx_spi_dma_prepare(struct spi_master *master, + enum dma_transfer_direction dir) { - struct spi_transfer *t = espi->current_msg->state; + struct ep93xx_spi *espi = spi_master_get_devdata(master); + struct spi_transfer *xfer = master->cur_msg->state; struct dma_async_tx_descriptor *txd; enum dma_slave_buswidth buswidth; struct dma_slave_config conf; @@ -362,10 +268,10 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir) struct sg_table *sgt; struct dma_chan *chan; const void *buf, *pbuf; - size_t len = t->len; + size_t len = xfer->len; int i, ret, nents; - if (t->bits_per_word > 8) + if (xfer->bits_per_word > 8) buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES; else buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE; @@ -375,14 +281,14 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir) if (dir == DMA_DEV_TO_MEM) { chan = espi->dma_rx; - buf = t->rx_buf; + buf = xfer->rx_buf; sgt = &espi->rx_sgt; conf.src_addr = espi->sspdr_phys; conf.src_addr_width = buswidth; } else { chan = espi->dma_tx; - buf = t->tx_buf; + buf = xfer->tx_buf; sgt = &espi->tx_sgt; conf.dst_addr = espi->sspdr_phys; @@ -429,7 +335,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir) } if (WARN_ON(len)) { - dev_warn(&espi->pdev->dev, "len = %zu expected 0!\n", len); + dev_warn(&master->dev, "len = %zu expected 0!\n", len); return ERR_PTR(-EINVAL); } @@ -447,15 +353,16 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir) /** * ep93xx_spi_dma_finish() - finishes with a DMA transfer - * @espi: ep93xx SPI controller struct + * @master: SPI master * @dir: DMA transfer direction * * Function finishes with the DMA transfer. After this, the DMA buffer is * unmapped. */ -static void ep93xx_spi_dma_finish(struct ep93xx_spi *espi, +static void ep93xx_spi_dma_finish(struct spi_master *master, enum dma_transfer_direction dir) { + struct ep93xx_spi *espi = spi_master_get_devdata(master); struct dma_chan *chan; struct sg_table *sgt; @@ -472,72 +379,107 @@ static void ep93xx_spi_dma_finish(struct ep93xx_spi *espi, static void ep93xx_spi_dma_callback(void *callback_param) { - complete(callback_param); + struct spi_master *master = callback_param; + + ep93xx_spi_dma_finish(master, DMA_MEM_TO_DEV); + ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM); + + spi_finalize_current_transfer(master); } -static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi) +static int ep93xx_spi_dma_transfer(struct spi_master *master) { - struct spi_message *msg = espi->current_msg; + struct ep93xx_spi *espi = spi_master_get_devdata(master); struct dma_async_tx_descriptor *rxd, *txd; - rxd = ep93xx_spi_dma_prepare(espi, DMA_DEV_TO_MEM); + rxd = ep93xx_spi_dma_prepare(master, DMA_DEV_TO_MEM); if (IS_ERR(rxd)) { - dev_err(&espi->pdev->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd)); - msg->status = PTR_ERR(rxd); - return; + dev_err(&master->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd)); + return PTR_ERR(rxd); } - txd = ep93xx_spi_dma_prepare(espi, DMA_MEM_TO_DEV); + txd = ep93xx_spi_dma_prepare(master, DMA_MEM_TO_DEV); if (IS_ERR(txd)) { - ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM); - dev_err(&espi->pdev->dev, "DMA TX failed: %ld\n", PTR_ERR(txd)); - msg->status = PTR_ERR(txd); - return; + ep93xx_spi_dma_finish(master, DMA_DEV_TO_MEM); + dev_err(&master->dev, "DMA TX failed: %ld\n", PTR_ERR(txd)); + return PTR_ERR(txd); } /* We are ready when RX is done */ rxd->callback = ep93xx_spi_dma_callback; - rxd->callback_param = &espi->wait; + rxd->callback_param = master; - /* Now submit both descriptors and wait while they finish */ + /* Now submit both descriptors and start DMA */ dmaengine_submit(rxd); dmaengine_submit(txd); dma_async_issue_pending(espi->dma_rx); dma_async_issue_pending(espi->dma_tx); - wait_for_completion(&espi->wait); - - ep93xx_spi_dma_finish(espi, DMA_MEM_TO_DEV); - ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM); + /* signal that we need to wait for completion */ + return 1; } -/** - * ep93xx_spi_process_transfer() - processes one SPI transfer - * @espi: ep93xx SPI controller struct - * @msg: current message - * @t: transfer to process - * - * This function processes one SPI transfer given in @t. Function waits until - * transfer is complete (may sleep) and updates @msg->status based on whether - * transfer was successfully processed or not. - */ -static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi, - struct spi_message *msg, - struct spi_transfer *t) +static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id) { - int err; + struct spi_master *master = dev_id; + struct ep93xx_spi *espi = spi_master_get_devdata(master); + u32 val; + + /* + * If we got ROR (receive overrun) interrupt we know that something is + * wrong. Just abort the message. + */ + if (readl(espi->mmio + SSPIIR) & SSPIIR_RORIS) { + /* clear the overrun interrupt */ + writel(0, espi->mmio + SSPICR); + dev_warn(&master->dev, + "receive overrun, aborting the message\n"); + master->cur_msg->status = -EIO; + } else { + /* + * Interrupt is either RX (RIS) or TX (TIS). For both cases we + * simply execute next data transfer. + */ + if (ep93xx_spi_read_write(master)) { + /* + * In normal case, there still is some processing left + * for current transfer. Let's wait for the next + * interrupt then. + */ + return IRQ_HANDLED; + } + } - msg->state = t; + /* + * Current transfer is finished, either with error or with success. In + * any case we disable interrupts and notify the worker to handle + * any post-processing of the message. + */ + val = readl(espi->mmio + SSPCR1); + val &= ~(SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE); + writel(val, espi->mmio + SSPCR1); + + spi_finalize_current_transfer(master); + + return IRQ_HANDLED; +} - err = ep93xx_spi_chip_setup(espi, msg->spi, t); - if (err) { - dev_err(&espi->pdev->dev, - "failed to setup chip for transfer\n"); - msg->status = err; - return; +static int ep93xx_spi_transfer_one(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct ep93xx_spi *espi = spi_master_get_devdata(master); + u32 val; + int ret; + + ret = ep93xx_spi_chip_setup(master, spi, xfer); + if (ret) { + dev_err(&master->dev, "failed to setup chip for transfer\n"); + return ret; } + master->cur_msg->state = xfer; espi->rx = 0; espi->tx = 0; @@ -546,83 +488,37 @@ static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi, * fit into the FIFO and can be transferred with a single interrupt. * So in these cases we will be using PIO and don't bother for DMA. */ - if (espi->dma_rx && t->len > SPI_FIFO_SIZE) - ep93xx_spi_dma_transfer(espi); - else - ep93xx_spi_pio_transfer(espi); + if (espi->dma_rx && xfer->len > SPI_FIFO_SIZE) + return ep93xx_spi_dma_transfer(master); - /* - * In case of error during transmit, we bail out from processing - * the message. - */ - if (msg->status) - return; + /* Using PIO so prime the TX FIFO and enable interrupts */ + ep93xx_spi_read_write(master); - msg->actual_length += t->len; + val = readl(espi->mmio + SSPCR1); + val |= (SSPCR1_RORIE | SSPCR1_TIE | SSPCR1_RIE); + writel(val, espi->mmio + SSPCR1); - /* - * After this transfer is finished, perform any possible - * post-transfer actions requested by the protocol driver. - */ - if (t->delay_usecs) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(usecs_to_jiffies(t->delay_usecs)); - } - if (t->cs_change) { - if (!list_is_last(&t->transfer_list, &msg->transfers)) { - /* - * In case protocol driver is asking us to drop the - * chipselect briefly, we let the scheduler to handle - * any "delay" here. - */ - ep93xx_spi_cs_control(msg->spi, false); - cond_resched(); - ep93xx_spi_cs_control(msg->spi, true); - } - } + /* signal that we need to wait for completion */ + return 1; } -/* - * ep93xx_spi_process_message() - process one SPI message - * @espi: ep93xx SPI controller struct - * @msg: message to process - * - * This function processes a single SPI message. We go through all transfers in - * the message and pass them to ep93xx_spi_process_transfer(). Chipselect is - * asserted during the whole message (unless per transfer cs_change is set). - * - * @msg->status contains %0 in case of success or negative error code in case of - * failure. - */ -static void ep93xx_spi_process_message(struct ep93xx_spi *espi, - struct spi_message *msg) +static int ep93xx_spi_prepare_message(struct spi_master *master, + struct spi_message *msg) { + struct ep93xx_spi *espi = spi_master_get_devdata(master); unsigned long timeout; - struct spi_transfer *t; - int err; - - /* - * Enable the SPI controller and its clock. - */ - err = ep93xx_spi_enable(espi); - if (err) { - dev_err(&espi->pdev->dev, "failed to enable SPI controller\n"); - msg->status = err; - return; - } /* * Just to be sure: flush any data from RX FIFO. */ timeout = jiffies + msecs_to_jiffies(SPI_TIMEOUT); - while (ep93xx_spi_read_u16(espi, SSPSR) & SSPSR_RNE) { + while (readl(espi->mmio + SSPSR) & SSPSR_RNE) { if (time_after(jiffies, timeout)) { - dev_warn(&espi->pdev->dev, + dev_warn(&master->dev, "timeout while flushing RX FIFO\n"); - msg->status = -ETIMEDOUT; - return; + return -ETIMEDOUT; } - ep93xx_spi_read_u16(espi, SSPDR); + readl(espi->mmio + SSPDR); } /* @@ -631,81 +527,38 @@ static void ep93xx_spi_process_message(struct ep93xx_spi *espi, */ espi->fifo_level = 0; - /* - * Assert the chipselect. - */ - ep93xx_spi_cs_control(msg->spi, true); - - list_for_each_entry(t, &msg->transfers, transfer_list) { - ep93xx_spi_process_transfer(espi, msg, t); - if (msg->status) - break; - } - - /* - * Now the whole message is transferred (or failed for some reason). We - * deselect the device and disable the SPI controller. - */ - ep93xx_spi_cs_control(msg->spi, false); - ep93xx_spi_disable(espi); + return 0; } -static int ep93xx_spi_transfer_one_message(struct spi_master *master, - struct spi_message *msg) +static int ep93xx_spi_prepare_hardware(struct spi_master *master) { struct ep93xx_spi *espi = spi_master_get_devdata(master); + u32 val; + int ret; - msg->state = NULL; - msg->status = 0; - msg->actual_length = 0; - - espi->current_msg = msg; - ep93xx_spi_process_message(espi, msg); - espi->current_msg = NULL; + ret = clk_enable(espi->clk); + if (ret) + return ret; - spi_finalize_current_message(master); + val = readl(espi->mmio + SSPCR1); + val |= SSPCR1_SSE; + writel(val, espi->mmio + SSPCR1); return 0; } -static irqreturn_t ep93xx_spi_interrupt(int irq, void *dev_id) +static int ep93xx_spi_unprepare_hardware(struct spi_master *master) { - struct ep93xx_spi *espi = dev_id; - u8 irq_status = ep93xx_spi_read_u8(espi, SSPIIR); + struct ep93xx_spi *espi = spi_master_get_devdata(master); + u32 val; - /* - * If we got ROR (receive overrun) interrupt we know that something is - * wrong. Just abort the message. - */ - if (unlikely(irq_status & SSPIIR_RORIS)) { - /* clear the overrun interrupt */ - ep93xx_spi_write_u8(espi, SSPICR, 0); - dev_warn(&espi->pdev->dev, - "receive overrun, aborting the message\n"); - espi->current_msg->status = -EIO; - } else { - /* - * Interrupt is either RX (RIS) or TX (TIS). For both cases we - * simply execute next data transfer. - */ - if (ep93xx_spi_read_write(espi)) { - /* - * In normal case, there still is some processing left - * for current transfer. Let's wait for the next - * interrupt then. - */ - return IRQ_HANDLED; - } - } + val = readl(espi->mmio + SSPCR1); + val &= ~SSPCR1_SSE; + writel(val, espi->mmio + SSPCR1); - /* - * Current transfer is finished, either with error or with success. In - * any case we disable interrupts and notify the worker to handle - * any post-processing of the message. - */ - ep93xx_spi_disable_interrupts(espi); - complete(&espi->wait); - return IRQ_HANDLED; + clk_disable(espi->clk); + + return 0; } static bool ep93xx_spi_dma_filter(struct dma_chan *chan, void *filter_param) @@ -809,7 +662,10 @@ static int ep93xx_spi_probe(struct platform_device *pdev) if (!master) return -ENOMEM; - master->transfer_one_message = ep93xx_spi_transfer_one_message; + master->prepare_transfer_hardware = ep93xx_spi_prepare_hardware; + master->unprepare_transfer_hardware = ep93xx_spi_unprepare_hardware; + master->prepare_message = ep93xx_spi_prepare_message; + master->transfer_one = ep93xx_spi_transfer_one; master->bus_num = pdev->id; master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16); @@ -850,26 +706,23 @@ static int ep93xx_spi_probe(struct platform_device *pdev) goto fail_release_master; } - init_completion(&espi->wait); - /* * Calculate maximum and minimum supported clock rates * for the controller. */ master->max_speed_hz = clk_get_rate(espi->clk) / 2; master->min_speed_hz = clk_get_rate(espi->clk) / (254 * 256); - espi->pdev = pdev; espi->sspdr_phys = res->start + SSPDR; - espi->regs_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(espi->regs_base)) { - error = PTR_ERR(espi->regs_base); + espi->mmio = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(espi->mmio)) { + error = PTR_ERR(espi->mmio); goto fail_release_master; } error = devm_request_irq(&pdev->dev, irq, ep93xx_spi_interrupt, - 0, "ep93xx-spi", espi); + 0, "ep93xx-spi", master); if (error) { dev_err(&pdev->dev, "failed to request irq\n"); goto fail_release_master; @@ -879,7 +732,7 @@ static int ep93xx_spi_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "DMA setup failed. Falling back to PIO\n"); /* make sure that the hardware is disabled */ - ep93xx_spi_write_u8(espi, SSPCR1, 0); + writel(0, espi->mmio + SSPCR1); error = devm_spi_register_master(&pdev->dev, master); if (error) { diff --git a/drivers/spi/spi-falcon.c b/drivers/spi/spi-falcon.c index 286b2c81fc6b..f8638e82e5db 100644 --- a/drivers/spi/spi-falcon.c +++ b/drivers/spi/spi-falcon.c @@ -395,11 +395,6 @@ static int falcon_sflash_probe(struct platform_device *pdev) struct spi_master *master; int ret; - if (ltq_boot_select() != BS_SPI) { - dev_err(&pdev->dev, "invalid bootstrap options\n"); - return -ENODEV; - } - master = spi_alloc_master(&pdev->dev, sizeof(*priv)); if (!master) return -ENOMEM; diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index 28fc9f161b9d..4b6dd73b80da 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -669,8 +669,8 @@ static int orion_spi_probe(struct platform_device *pdev) status = of_property_read_u32(np, "reg", &cs); if (status) { dev_err(&pdev->dev, - "%s has no valid 'reg' property (%d)\n", - np->full_name, status); + "%pOF has no valid 'reg' property (%d)\n", + np, status); status = 0; continue; } diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 4fcbb0aa71d3..cf8ee5e48f73 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -40,9 +40,13 @@ #include <linux/ioport.h> #include <linux/acpi.h> #include <linux/highmem.h> +#include <linux/idr.h> #define CREATE_TRACE_POINTS #include <trace/events/spi.h> +#define SPI_DYN_FIRST_BUS_NUM 0 + +static DEFINE_IDR(spi_master_idr); static void spidev_release(struct device *dev) { @@ -321,8 +325,7 @@ static int spi_uevent(struct device *dev, struct kobj_uevent_env *env) if (rc != -ENODEV) return rc; - add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias); - return 0; + return add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias); } struct bus_type spi_bus_type = { @@ -421,6 +424,7 @@ static LIST_HEAD(spi_controller_list); /* * Used to protect add/del opertion for board_info list and * spi_controller list, and their matching process + * also used to protect object of type struct idr */ static DEFINE_MUTEX(board_lock); @@ -1533,15 +1537,15 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, int rc; /* Mode (clock phase/polarity/etc.) */ - if (of_find_property(nc, "spi-cpha", NULL)) + if (of_property_read_bool(nc, "spi-cpha")) spi->mode |= SPI_CPHA; - if (of_find_property(nc, "spi-cpol", NULL)) + if (of_property_read_bool(nc, "spi-cpol")) spi->mode |= SPI_CPOL; - if (of_find_property(nc, "spi-cs-high", NULL)) + if (of_property_read_bool(nc, "spi-cs-high")) spi->mode |= SPI_CS_HIGH; - if (of_find_property(nc, "spi-3wire", NULL)) + if (of_property_read_bool(nc, "spi-3wire")) spi->mode |= SPI_3WIRE; - if (of_find_property(nc, "spi-lsb-first", NULL)) + if (of_property_read_bool(nc, "spi-lsb-first")) spi->mode |= SPI_LSB_FIRST; /* Device DUAL/QUAD mode */ @@ -1583,8 +1587,8 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, if (spi_controller_is_slave(ctlr)) { if (strcmp(nc->name, "slave")) { - dev_err(&ctlr->dev, "%s is not called 'slave'\n", - nc->full_name); + dev_err(&ctlr->dev, "%pOF is not called 'slave'\n", + nc); return -EINVAL; } return 0; @@ -1593,8 +1597,8 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, /* Device address */ rc = of_property_read_u32(nc, "reg", &value); if (rc) { - dev_err(&ctlr->dev, "%s has no valid 'reg' property (%d)\n", - nc->full_name, rc); + dev_err(&ctlr->dev, "%pOF has no valid 'reg' property (%d)\n", + nc, rc); return rc; } spi->chip_select = value; @@ -1603,8 +1607,7 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, rc = of_property_read_u32(nc, "spi-max-frequency", &value); if (rc) { dev_err(&ctlr->dev, - "%s has no valid 'spi-max-frequency' property (%d)\n", - nc->full_name, rc); + "%pOF has no valid 'spi-max-frequency' property (%d)\n", nc, rc); return rc; } spi->max_speed_hz = value; @@ -1621,8 +1624,7 @@ of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc) /* Alloc an spi_device */ spi = spi_alloc_device(ctlr); if (!spi) { - dev_err(&ctlr->dev, "spi_device alloc error for %s\n", - nc->full_name); + dev_err(&ctlr->dev, "spi_device alloc error for %pOF\n", nc); rc = -ENOMEM; goto err_out; } @@ -1631,8 +1633,7 @@ of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc) rc = of_modalias_node(nc, spi->modalias, sizeof(spi->modalias)); if (rc < 0) { - dev_err(&ctlr->dev, "cannot find modalias for %s\n", - nc->full_name); + dev_err(&ctlr->dev, "cannot find modalias for %pOF\n", nc); goto err_out; } @@ -1647,8 +1648,7 @@ of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc) /* Register the new device */ rc = spi_add_device(spi); if (rc) { - dev_err(&ctlr->dev, "spi_device register error %s\n", - nc->full_name); + dev_err(&ctlr->dev, "spi_device register error %pOF\n", nc); goto err_of_node_put; } @@ -1682,8 +1682,7 @@ static void of_register_spi_devices(struct spi_controller *ctlr) spi = of_register_spi_device(ctlr, nc); if (IS_ERR(spi)) { dev_warn(&ctlr->dev, - "Failed to create SPI device for %s\n", - nc->full_name); + "Failed to create SPI device for %pOF\n", nc); of_node_clear_flag(nc, OF_POPULATED); } } @@ -2052,11 +2051,10 @@ static int of_spi_register_master(struct spi_controller *ctlr) */ int spi_register_controller(struct spi_controller *ctlr) { - static atomic_t dyn_bus_id = ATOMIC_INIT((1<<15) - 1); struct device *dev = ctlr->dev.parent; struct boardinfo *bi; int status = -ENODEV; - int dynamic = 0; + int id; if (!dev) return -ENODEV; @@ -2072,19 +2070,28 @@ int spi_register_controller(struct spi_controller *ctlr) */ if (ctlr->num_chipselect == 0) return -EINVAL; - - if ((ctlr->bus_num < 0) && ctlr->dev.of_node) - ctlr->bus_num = of_alias_get_id(ctlr->dev.of_node, "spi"); - - /* convention: dynamically assigned bus IDs count down from the max */ + /* allocate dynamic bus number using Linux idr */ + if ((ctlr->bus_num < 0) && ctlr->dev.of_node) { + id = of_alias_get_id(ctlr->dev.of_node, "spi"); + if (id >= 0) { + ctlr->bus_num = id; + mutex_lock(&board_lock); + id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num, + ctlr->bus_num + 1, GFP_KERNEL); + mutex_unlock(&board_lock); + if (WARN(id < 0, "couldn't get idr")) + return id == -ENOSPC ? -EBUSY : id; + } + } if (ctlr->bus_num < 0) { - /* FIXME switch to an IDR based scheme, something like - * I2C now uses, so we can't run out of "dynamic" IDs - */ - ctlr->bus_num = atomic_dec_return(&dyn_bus_id); - dynamic = 1; + mutex_lock(&board_lock); + id = idr_alloc(&spi_master_idr, ctlr, SPI_DYN_FIRST_BUS_NUM, 0, + GFP_KERNEL); + mutex_unlock(&board_lock); + if (WARN(id < 0, "couldn't get idr")) + return id; + ctlr->bus_num = id; } - INIT_LIST_HEAD(&ctlr->queue); spin_lock_init(&ctlr->queue_lock); spin_lock_init(&ctlr->bus_lock_spinlock); @@ -2100,11 +2107,16 @@ int spi_register_controller(struct spi_controller *ctlr) */ dev_set_name(&ctlr->dev, "spi%u", ctlr->bus_num); status = device_add(&ctlr->dev); - if (status < 0) + if (status < 0) { + /* free bus id */ + mutex_lock(&board_lock); + idr_remove(&spi_master_idr, ctlr->bus_num); + mutex_unlock(&board_lock); goto done; - dev_dbg(dev, "registered %s %s%s\n", + } + dev_dbg(dev, "registered %s %s\n", spi_controller_is_slave(ctlr) ? "slave" : "master", - dev_name(&ctlr->dev), dynamic ? " (dynamic)" : ""); + dev_name(&ctlr->dev)); /* If we're using a queued driver, start the queue */ if (ctlr->transfer) @@ -2113,6 +2125,10 @@ int spi_register_controller(struct spi_controller *ctlr) status = spi_controller_initialize_queue(ctlr); if (status) { device_del(&ctlr->dev); + /* free bus id */ + mutex_lock(&board_lock); + idr_remove(&spi_master_idr, ctlr->bus_num); + mutex_unlock(&board_lock); goto done; } } @@ -2191,19 +2207,33 @@ static int __unregister(struct device *dev, void *null) */ void spi_unregister_controller(struct spi_controller *ctlr) { + struct spi_controller *found; int dummy; + /* First make sure that this controller was ever added */ + mutex_lock(&board_lock); + found = idr_find(&spi_master_idr, ctlr->bus_num); + mutex_unlock(&board_lock); + if (found != ctlr) { + dev_dbg(&ctlr->dev, + "attempting to delete unregistered controller [%s]\n", + dev_name(&ctlr->dev)); + return; + } if (ctlr->queued) { if (spi_destroy_queue(ctlr)) dev_err(&ctlr->dev, "queue remove failed\n"); } - mutex_lock(&board_lock); list_del(&ctlr->list); mutex_unlock(&board_lock); dummy = device_for_each_child(&ctlr->dev, NULL, __unregister); device_unregister(&ctlr->dev); + /* free bus id */ + mutex_lock(&board_lock); + idr_remove(&spi_master_idr, ctlr->bus_num); + mutex_unlock(&board_lock); } EXPORT_SYMBOL_GPL(spi_unregister_controller); @@ -3311,8 +3341,8 @@ static int of_spi_notify(struct notifier_block *nb, unsigned long action, put_device(&ctlr->dev); if (IS_ERR(spi)) { - pr_err("%s: failed to create for '%s'\n", - __func__, rd->dn->full_name); + pr_err("%s: failed to create for '%pOF'\n", + __func__, rd->dn); of_node_clear_flag(rd->dn, OF_POPULATED); return notifier_from_errno(PTR_ERR(spi)); } |