3 files changed, 20 insertions, 28 deletions

diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index b87116e9b413..7104cf17b848 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -1193,7 +1193,6 @@ static int bcm2835_spi_setup(struct spi_device *spi)
 	struct spi_controller *ctlr = spi->controller;
 	struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
 	struct gpio_chip *chip;
-	enum gpio_lookup_flags lflags;
 	u32 cs;
 
 	/*
@@ -1259,21 +1258,9 @@ static int bcm2835_spi_setup(struct spi_device *spi)
 	if (!chip)
 		return 0;
 
-	/*
-	 * Retrieve the corresponding GPIO line used for CS.
-	 * The inversion semantics will be handled by the GPIO core
-	 * code, so we pass GPIOD_OUT_LOW for "unasserted" and
-	 * the correct flag for inversion semantics. The SPI_CS_HIGH
-	 * on spi->mode cannot be checked for polarity in this case
-	 * as the flag use_gpio_descriptors enforces SPI_CS_HIGH.
-	 */
-	if (of_property_read_bool(spi->dev.of_node, "spi-cs-high"))
-		lflags = GPIO_ACTIVE_HIGH;
-	else
-		lflags = GPIO_ACTIVE_LOW;
 	spi->cs_gpiod = gpiochip_request_own_desc(chip, 8 - spi->chip_select,
 						  DRV_NAME,
-						  lflags,
+						  GPIO_LOOKUP_FLAGS_DEFAULT,
 						  GPIOD_OUT_LOW);
 	if (IS_ERR(spi->cs_gpiod))
 		return PTR_ERR(spi->cs_gpiod);
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 3967afa465f0..1a08c1d584ab 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1080,12 +1080,11 @@ MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids);
 #ifdef CONFIG_PM_SLEEP
 static int dspi_suspend(struct device *dev)
 {
-	struct spi_controller *ctlr = dev_get_drvdata(dev);
-	struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
+	struct fsl_dspi *dspi = dev_get_drvdata(dev);
 
 	if (dspi->irq)
 		disable_irq(dspi->irq);
-	spi_controller_suspend(ctlr);
+	spi_controller_suspend(dspi->ctlr);
 	clk_disable_unprepare(dspi->clk);
 
 	pinctrl_pm_select_sleep_state(dev);
@@ -1095,8 +1094,7 @@ static int dspi_suspend(struct device *dev)
 
 static int dspi_resume(struct device *dev)
 {
-	struct spi_controller *ctlr = dev_get_drvdata(dev);
-	struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
+	struct fsl_dspi *dspi = dev_get_drvdata(dev);
 	int ret;
 
 	pinctrl_pm_select_default_state(dev);
@@ -1104,7 +1102,7 @@ static int dspi_resume(struct device *dev)
 	ret = clk_prepare_enable(dspi->clk);
 	if (ret)
 		return ret;
-	spi_controller_resume(ctlr);
+	spi_controller_resume(dspi->ctlr);
 	if (dspi->irq)
 		enable_irq(dspi->irq);
 
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 060b1f5c9b04..4b80e27ecdbf 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1676,15 +1676,18 @@ static int spi_imx_probe(struct platform_device *pdev)
 		goto out_master_put;
 	}
 
-	pm_runtime_enable(spi_imx->dev);
+	ret = clk_prepare_enable(spi_imx->clk_per);
+	if (ret)
+		goto out_master_put;
+
+	ret = clk_prepare_enable(spi_imx->clk_ipg);
+	if (ret)
+		goto out_put_per;
+
 	pm_runtime_set_autosuspend_delay(spi_imx->dev, MXC_RPM_TIMEOUT);
 	pm_runtime_use_autosuspend(spi_imx->dev);
-
-	ret = pm_runtime_get_sync(spi_imx->dev);
-	if (ret < 0) {
-		dev_err(spi_imx->dev, "failed to enable clock\n");
-		goto out_runtime_pm_put;
-	}
+	pm_runtime_set_active(spi_imx->dev);
+	pm_runtime_enable(spi_imx->dev);
 
 	spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
 	/*
@@ -1722,8 +1725,12 @@ out_bitbang_start:
 		spi_imx_sdma_exit(spi_imx);
 out_runtime_pm_put:
 	pm_runtime_dont_use_autosuspend(spi_imx->dev);
-	pm_runtime_put_sync(spi_imx->dev);
+	pm_runtime_set_suspended(&pdev->dev);
 	pm_runtime_disable(spi_imx->dev);
+
+	clk_disable_unprepare(spi_imx->clk_ipg);
+out_put_per:
+	clk_disable_unprepare(spi_imx->clk_per);
 out_master_put:
 	spi_master_put(master);