diff options
Diffstat (limited to 'drivers/staging/fsl-dpaa2/ethernet/dpni.h')
-rw-r--r-- | drivers/staging/fsl-dpaa2/ethernet/dpni.h | 824 |
1 files changed, 0 insertions, 824 deletions
diff --git a/drivers/staging/fsl-dpaa2/ethernet/dpni.h b/drivers/staging/fsl-dpaa2/ethernet/dpni.h deleted file mode 100644 index b378a00c7c53..000000000000 --- a/drivers/staging/fsl-dpaa2/ethernet/dpni.h +++ /dev/null @@ -1,824 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ -/* Copyright 2013-2016 Freescale Semiconductor Inc. - * Copyright 2016 NXP - */ -#ifndef __FSL_DPNI_H -#define __FSL_DPNI_H - -#include "dpkg.h" - -struct fsl_mc_io; - -/** - * Data Path Network Interface API - * Contains initialization APIs and runtime control APIs for DPNI - */ - -/** General DPNI macros */ - -/** - * Maximum number of traffic classes - */ -#define DPNI_MAX_TC 8 -/** - * Maximum number of buffer pools per DPNI - */ -#define DPNI_MAX_DPBP 8 - -/** - * All traffic classes considered; see dpni_set_queue() - */ -#define DPNI_ALL_TCS (u8)(-1) -/** - * All flows within traffic class considered; see dpni_set_queue() - */ -#define DPNI_ALL_TC_FLOWS (u16)(-1) -/** - * Generate new flow ID; see dpni_set_queue() - */ -#define DPNI_NEW_FLOW_ID (u16)(-1) - -/** - * Tx traffic is always released to a buffer pool on transmit, there are no - * resources allocated to have the frames confirmed back to the source after - * transmission. - */ -#define DPNI_OPT_TX_FRM_RELEASE 0x000001 -/** - * Disables support for MAC address filtering for addresses other than primary - * MAC address. This affects both unicast and multicast. Promiscuous mode can - * still be enabled/disabled for both unicast and multicast. If promiscuous mode - * is disabled, only traffic matching the primary MAC address will be accepted. - */ -#define DPNI_OPT_NO_MAC_FILTER 0x000002 -/** - * Allocate policers for this DPNI. They can be used to rate-limit traffic per - * traffic class (TC) basis. - */ -#define DPNI_OPT_HAS_POLICING 0x000004 -/** - * Congestion can be managed in several ways, allowing the buffer pool to - * deplete on ingress, taildrop on each queue or use congestion groups for sets - * of queues. If set, it configures a single congestion groups across all TCs. - * If reset, a congestion group is allocated for each TC. Only relevant if the - * DPNI has multiple traffic classes. - */ -#define DPNI_OPT_SHARED_CONGESTION 0x000008 -/** - * Enables TCAM for Flow Steering and QoS look-ups. If not specified, all - * look-ups are exact match. Note that TCAM is not available on LS1088 and its - * variants. Setting this bit on these SoCs will trigger an error. - */ -#define DPNI_OPT_HAS_KEY_MASKING 0x000010 -/** - * Disables the flow steering table. - */ -#define DPNI_OPT_NO_FS 0x000020 - -int dpni_open(struct fsl_mc_io *mc_io, - u32 cmd_flags, - int dpni_id, - u16 *token); - -int dpni_close(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token); - -/** - * struct dpni_pools_cfg - Structure representing buffer pools configuration - * @num_dpbp: Number of DPBPs - * @pools: Array of buffer pools parameters; The number of valid entries - * must match 'num_dpbp' value - * @pools.dpbp_id: DPBP object ID - * @pools.buffer_size: Buffer size - * @pools.backup_pool: Backup pool - */ -struct dpni_pools_cfg { - u8 num_dpbp; - struct { - int dpbp_id; - u16 buffer_size; - int backup_pool; - } pools[DPNI_MAX_DPBP]; -}; - -int dpni_set_pools(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - const struct dpni_pools_cfg *cfg); - -int dpni_enable(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token); - -int dpni_disable(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token); - -int dpni_is_enabled(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - int *en); - -int dpni_reset(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token); - -/** - * DPNI IRQ Index and Events - */ - -/** - * IRQ index - */ -#define DPNI_IRQ_INDEX 0 -/** - * IRQ event - indicates a change in link state - */ -#define DPNI_IRQ_EVENT_LINK_CHANGED 0x00000001 - -int dpni_set_irq_enable(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - u8 irq_index, - u8 en); - -int dpni_get_irq_enable(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - u8 irq_index, - u8 *en); - -int dpni_set_irq_mask(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - u8 irq_index, - u32 mask); - -int dpni_get_irq_mask(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - u8 irq_index, - u32 *mask); - -int dpni_get_irq_status(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - u8 irq_index, - u32 *status); - -int dpni_clear_irq_status(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - u8 irq_index, - u32 status); - -/** - * struct dpni_attr - Structure representing DPNI attributes - * @options: Any combination of the following options: - * DPNI_OPT_TX_FRM_RELEASE - * DPNI_OPT_NO_MAC_FILTER - * DPNI_OPT_HAS_POLICING - * DPNI_OPT_SHARED_CONGESTION - * DPNI_OPT_HAS_KEY_MASKING - * DPNI_OPT_NO_FS - * @num_queues: Number of Tx and Rx queues used for traffic distribution. - * @num_tcs: Number of traffic classes (TCs), reserved for the DPNI. - * @mac_filter_entries: Number of entries in the MAC address filtering table. - * @vlan_filter_entries: Number of entries in the VLAN address filtering table. - * @qos_entries: Number of entries in the QoS classification table. - * @fs_entries: Number of entries in the flow steering table. - * @qos_key_size: Size, in bytes, of the QoS look-up key. Defining a key larger - * than this when adding QoS entries will result in an error. - * @fs_key_size: Size, in bytes, of the flow steering look-up key. Defining a - * key larger than this when composing the hash + FS key will - * result in an error. - * @wriop_version: Version of WRIOP HW block. The 3 version values are stored - * on 6, 5, 5 bits respectively. - */ -struct dpni_attr { - u32 options; - u8 num_queues; - u8 num_tcs; - u8 mac_filter_entries; - u8 vlan_filter_entries; - u8 qos_entries; - u16 fs_entries; - u8 qos_key_size; - u8 fs_key_size; - u16 wriop_version; -}; - -int dpni_get_attributes(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - struct dpni_attr *attr); - -/** - * DPNI errors - */ - -/** - * Extract out of frame header error - */ -#define DPNI_ERROR_EOFHE 0x00020000 -/** - * Frame length error - */ -#define DPNI_ERROR_FLE 0x00002000 -/** - * Frame physical error - */ -#define DPNI_ERROR_FPE 0x00001000 -/** - * Parsing header error - */ -#define DPNI_ERROR_PHE 0x00000020 -/** - * Parser L3 checksum error - */ -#define DPNI_ERROR_L3CE 0x00000004 -/** - * Parser L3 checksum error - */ -#define DPNI_ERROR_L4CE 0x00000001 - -/** - * enum dpni_error_action - Defines DPNI behavior for errors - * @DPNI_ERROR_ACTION_DISCARD: Discard the frame - * @DPNI_ERROR_ACTION_CONTINUE: Continue with the normal flow - * @DPNI_ERROR_ACTION_SEND_TO_ERROR_QUEUE: Send the frame to the error queue - */ -enum dpni_error_action { - DPNI_ERROR_ACTION_DISCARD = 0, - DPNI_ERROR_ACTION_CONTINUE = 1, - DPNI_ERROR_ACTION_SEND_TO_ERROR_QUEUE = 2 -}; - -/** - * struct dpni_error_cfg - Structure representing DPNI errors treatment - * @errors: Errors mask; use 'DPNI_ERROR__<X> - * @error_action: The desired action for the errors mask - * @set_frame_annotation: Set to '1' to mark the errors in frame annotation - * status (FAS); relevant only for the non-discard action - */ -struct dpni_error_cfg { - u32 errors; - enum dpni_error_action error_action; - int set_frame_annotation; -}; - -int dpni_set_errors_behavior(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - struct dpni_error_cfg *cfg); - -/** - * DPNI buffer layout modification options - */ - -/** - * Select to modify the time-stamp setting - */ -#define DPNI_BUF_LAYOUT_OPT_TIMESTAMP 0x00000001 -/** - * Select to modify the parser-result setting; not applicable for Tx - */ -#define DPNI_BUF_LAYOUT_OPT_PARSER_RESULT 0x00000002 -/** - * Select to modify the frame-status setting - */ -#define DPNI_BUF_LAYOUT_OPT_FRAME_STATUS 0x00000004 -/** - * Select to modify the private-data-size setting - */ -#define DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE 0x00000008 -/** - * Select to modify the data-alignment setting - */ -#define DPNI_BUF_LAYOUT_OPT_DATA_ALIGN 0x00000010 -/** - * Select to modify the data-head-room setting - */ -#define DPNI_BUF_LAYOUT_OPT_DATA_HEAD_ROOM 0x00000020 -/** - * Select to modify the data-tail-room setting - */ -#define DPNI_BUF_LAYOUT_OPT_DATA_TAIL_ROOM 0x00000040 - -/** - * struct dpni_buffer_layout - Structure representing DPNI buffer layout - * @options: Flags representing the suggested modifications to the buffer - * layout; Use any combination of 'DPNI_BUF_LAYOUT_OPT_<X>' flags - * @pass_timestamp: Pass timestamp value - * @pass_parser_result: Pass parser results - * @pass_frame_status: Pass frame status - * @private_data_size: Size kept for private data (in bytes) - * @data_align: Data alignment - * @data_head_room: Data head room - * @data_tail_room: Data tail room - */ -struct dpni_buffer_layout { - u32 options; - int pass_timestamp; - int pass_parser_result; - int pass_frame_status; - u16 private_data_size; - u16 data_align; - u16 data_head_room; - u16 data_tail_room; -}; - -/** - * enum dpni_queue_type - Identifies a type of queue targeted by the command - * @DPNI_QUEUE_RX: Rx queue - * @DPNI_QUEUE_TX: Tx queue - * @DPNI_QUEUE_TX_CONFIRM: Tx confirmation queue - * @DPNI_QUEUE_RX_ERR: Rx error queue - */enum dpni_queue_type { - DPNI_QUEUE_RX, - DPNI_QUEUE_TX, - DPNI_QUEUE_TX_CONFIRM, - DPNI_QUEUE_RX_ERR, -}; - -int dpni_get_buffer_layout(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - enum dpni_queue_type qtype, - struct dpni_buffer_layout *layout); - -int dpni_set_buffer_layout(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - enum dpni_queue_type qtype, - const struct dpni_buffer_layout *layout); - -/** - * enum dpni_offload - Identifies a type of offload targeted by the command - * @DPNI_OFF_RX_L3_CSUM: Rx L3 checksum validation - * @DPNI_OFF_RX_L4_CSUM: Rx L4 checksum validation - * @DPNI_OFF_TX_L3_CSUM: Tx L3 checksum generation - * @DPNI_OFF_TX_L4_CSUM: Tx L4 checksum generation - */ -enum dpni_offload { - DPNI_OFF_RX_L3_CSUM, - DPNI_OFF_RX_L4_CSUM, - DPNI_OFF_TX_L3_CSUM, - DPNI_OFF_TX_L4_CSUM, -}; - -int dpni_set_offload(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - enum dpni_offload type, - u32 config); - -int dpni_get_offload(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - enum dpni_offload type, - u32 *config); - -int dpni_get_qdid(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - enum dpni_queue_type qtype, - u16 *qdid); - -int dpni_get_tx_data_offset(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - u16 *data_offset); - -#define DPNI_STATISTICS_CNT 7 - -/** - * union dpni_statistics - Union describing the DPNI statistics - * @page_0: Page_0 statistics structure - * @page_0.ingress_all_frames: Ingress frame count - * @page_0.ingress_all_bytes: Ingress byte count - * @page_0.ingress_multicast_frames: Ingress multicast frame count - * @page_0.ingress_multicast_bytes: Ingress multicast byte count - * @page_0.ingress_broadcast_frames: Ingress broadcast frame count - * @page_0.ingress_broadcast_bytes: Ingress broadcast byte count - * @page_1: Page_1 statistics structure - * @page_1.egress_all_frames: Egress frame count - * @page_1.egress_all_bytes: Egress byte count - * @page_1.egress_multicast_frames: Egress multicast frame count - * @page_1.egress_multicast_bytes: Egress multicast byte count - * @page_1.egress_broadcast_frames: Egress broadcast frame count - * @page_1.egress_broadcast_bytes: Egress broadcast byte count - * @page_2: Page_2 statistics structure - * @page_2.ingress_filtered_frames: Ingress filtered frame count - * @page_2.ingress_discarded_frames: Ingress discarded frame count - * @page_2.ingress_nobuffer_discards: Ingress discarded frame count due to - * lack of buffers - * @page_2.egress_discarded_frames: Egress discarded frame count - * @page_2.egress_confirmed_frames: Egress confirmed frame count - * @raw: raw statistics structure, used to index counters - */ -union dpni_statistics { - struct { - u64 ingress_all_frames; - u64 ingress_all_bytes; - u64 ingress_multicast_frames; - u64 ingress_multicast_bytes; - u64 ingress_broadcast_frames; - u64 ingress_broadcast_bytes; - } page_0; - struct { - u64 egress_all_frames; - u64 egress_all_bytes; - u64 egress_multicast_frames; - u64 egress_multicast_bytes; - u64 egress_broadcast_frames; - u64 egress_broadcast_bytes; - } page_1; - struct { - u64 ingress_filtered_frames; - u64 ingress_discarded_frames; - u64 ingress_nobuffer_discards; - u64 egress_discarded_frames; - u64 egress_confirmed_frames; - } page_2; - struct { - u64 counter[DPNI_STATISTICS_CNT]; - } raw; -}; - -int dpni_get_statistics(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - u8 page, - union dpni_statistics *stat); - -/** - * Enable auto-negotiation - */ -#define DPNI_LINK_OPT_AUTONEG 0x0000000000000001ULL -/** - * Enable half-duplex mode - */ -#define DPNI_LINK_OPT_HALF_DUPLEX 0x0000000000000002ULL -/** - * Enable pause frames - */ -#define DPNI_LINK_OPT_PAUSE 0x0000000000000004ULL -/** - * Enable a-symmetric pause frames - */ -#define DPNI_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL - -/** - * struct - Structure representing DPNI link configuration - * @rate: Rate - * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values - */ -struct dpni_link_cfg { - u32 rate; - u64 options; -}; - -int dpni_set_link_cfg(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - const struct dpni_link_cfg *cfg); - -/** - * struct dpni_link_state - Structure representing DPNI link state - * @rate: Rate - * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values - * @up: Link state; '0' for down, '1' for up - */ -struct dpni_link_state { - u32 rate; - u64 options; - int up; -}; - -int dpni_get_link_state(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - struct dpni_link_state *state); - -int dpni_set_max_frame_length(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - u16 max_frame_length); - -int dpni_get_max_frame_length(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - u16 *max_frame_length); - -int dpni_set_multicast_promisc(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - int en); - -int dpni_get_multicast_promisc(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - int *en); - -int dpni_set_unicast_promisc(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - int en); - -int dpni_get_unicast_promisc(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - int *en); - -int dpni_set_primary_mac_addr(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - const u8 mac_addr[6]); - -int dpni_get_primary_mac_addr(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - u8 mac_addr[6]); - -int dpni_get_port_mac_addr(struct fsl_mc_io *mc_io, - u32 cm_flags, - u16 token, - u8 mac_addr[6]); - -int dpni_add_mac_addr(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - const u8 mac_addr[6]); - -int dpni_remove_mac_addr(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - const u8 mac_addr[6]); - -int dpni_clear_mac_filters(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - int unicast, - int multicast); - -/** - * enum dpni_dist_mode - DPNI distribution mode - * @DPNI_DIST_MODE_NONE: No distribution - * @DPNI_DIST_MODE_HASH: Use hash distribution; only relevant if - * the 'DPNI_OPT_DIST_HASH' option was set at DPNI creation - * @DPNI_DIST_MODE_FS: Use explicit flow steering; only relevant if - * the 'DPNI_OPT_DIST_FS' option was set at DPNI creation - */ -enum dpni_dist_mode { - DPNI_DIST_MODE_NONE = 0, - DPNI_DIST_MODE_HASH = 1, - DPNI_DIST_MODE_FS = 2 -}; - -/** - * enum dpni_fs_miss_action - DPNI Flow Steering miss action - * @DPNI_FS_MISS_DROP: In case of no-match, drop the frame - * @DPNI_FS_MISS_EXPLICIT_FLOWID: In case of no-match, use explicit flow-id - * @DPNI_FS_MISS_HASH: In case of no-match, distribute using hash - */ -enum dpni_fs_miss_action { - DPNI_FS_MISS_DROP = 0, - DPNI_FS_MISS_EXPLICIT_FLOWID = 1, - DPNI_FS_MISS_HASH = 2 -}; - -/** - * struct dpni_fs_tbl_cfg - Flow Steering table configuration - * @miss_action: Miss action selection - * @default_flow_id: Used when 'miss_action = DPNI_FS_MISS_EXPLICIT_FLOWID' - */ -struct dpni_fs_tbl_cfg { - enum dpni_fs_miss_action miss_action; - u16 default_flow_id; -}; - -int dpni_prepare_key_cfg(const struct dpkg_profile_cfg *cfg, - u8 *key_cfg_buf); - -/** - * struct dpni_rx_tc_dist_cfg - Rx traffic class distribution configuration - * @dist_size: Set the distribution size; - * supported values: 1,2,3,4,6,7,8,12,14,16,24,28,32,48,56,64,96, - * 112,128,192,224,256,384,448,512,768,896,1024 - * @dist_mode: Distribution mode - * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with - * the extractions to be used for the distribution key by calling - * dpni_prepare_key_cfg() relevant only when - * 'dist_mode != DPNI_DIST_MODE_NONE', otherwise it can be '0' - * @fs_cfg: Flow Steering table configuration; only relevant if - * 'dist_mode = DPNI_DIST_MODE_FS' - */ -struct dpni_rx_tc_dist_cfg { - u16 dist_size; - enum dpni_dist_mode dist_mode; - u64 key_cfg_iova; - struct dpni_fs_tbl_cfg fs_cfg; -}; - -int dpni_set_rx_tc_dist(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - u8 tc_id, - const struct dpni_rx_tc_dist_cfg *cfg); - -/** - * enum dpni_dest - DPNI destination types - * @DPNI_DEST_NONE: Unassigned destination; The queue is set in parked mode and - * does not generate FQDAN notifications; user is expected to - * dequeue from the queue based on polling or other user-defined - * method - * @DPNI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN - * notifications to the specified DPIO; user is expected to dequeue - * from the queue only after notification is received - * @DPNI_DEST_DPCON: The queue is set in schedule mode and does not generate - * FQDAN notifications, but is connected to the specified DPCON - * object; user is expected to dequeue from the DPCON channel - */ -enum dpni_dest { - DPNI_DEST_NONE = 0, - DPNI_DEST_DPIO = 1, - DPNI_DEST_DPCON = 2 -}; - -/** - * struct dpni_queue - Queue structure - * @destination - Destination structure - * @destination.id: ID of the destination, only relevant if DEST_TYPE is > 0. - * Identifies either a DPIO or a DPCON object. - * Not relevant for Tx queues. - * @destination.type: May be one of the following: - * 0 - No destination, queue can be manually - * queried, but will not push traffic or - * notifications to a DPIO; - * 1 - The destination is a DPIO. When traffic - * becomes available in the queue a FQDAN - * (FQ data available notification) will be - * generated to selected DPIO; - * 2 - The destination is a DPCON. The queue is - * associated with a DPCON object for the - * purpose of scheduling between multiple - * queues. The DPCON may be independently - * configured to generate notifications. - * Not relevant for Tx queues. - * @destination.hold_active: Hold active, maintains a queue scheduled for longer - * in a DPIO during dequeue to reduce spread of traffic. - * Only relevant if queues are - * not affined to a single DPIO. - * @user_context: User data, presented to the user along with any frames - * from this queue. Not relevant for Tx queues. - * @flc: FD FLow Context structure - * @flc.value: Default FLC value for traffic dequeued from - * this queue. Please check description of FD - * structure for more information. - * Note that FLC values set using dpni_add_fs_entry, - * if any, take precedence over values per queue. - * @flc.stash_control: Boolean, indicates whether the 6 lowest - * - significant bits are used for stash control. - * significant bits are used for stash control. If set, the 6 - * least significant bits in value are interpreted as follows: - * - bits 0-1: indicates the number of 64 byte units of context - * that are stashed. FLC value is interpreted as a memory address - * in this case, excluding the 6 LS bits. - * - bits 2-3: indicates the number of 64 byte units of frame - * annotation to be stashed. Annotation is placed at FD[ADDR]. - * - bits 4-5: indicates the number of 64 byte units of frame - * data to be stashed. Frame data is placed at FD[ADDR] + - * FD[OFFSET]. - * For more details check the Frame Descriptor section in the - * hardware documentation. - */ -struct dpni_queue { - struct { - u16 id; - enum dpni_dest type; - char hold_active; - u8 priority; - } destination; - u64 user_context; - struct { - u64 value; - char stash_control; - } flc; -}; - -/** - * struct dpni_queue_id - Queue identification, used for enqueue commands - * or queue control - * @fqid: FQID used for enqueueing to and/or configuration of this specific FQ - * @qdbin: Queueing bin, used to enqueue using QDID, DQBIN, QPRI. Only relevant - * for Tx queues. - */ -struct dpni_queue_id { - u32 fqid; - u16 qdbin; -}; - -/** - * Set User Context - */ -#define DPNI_QUEUE_OPT_USER_CTX 0x00000001 -#define DPNI_QUEUE_OPT_DEST 0x00000002 -#define DPNI_QUEUE_OPT_FLC 0x00000004 -#define DPNI_QUEUE_OPT_HOLD_ACTIVE 0x00000008 - -int dpni_set_queue(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - enum dpni_queue_type qtype, - u8 tc, - u8 index, - u8 options, - const struct dpni_queue *queue); - -int dpni_get_queue(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - enum dpni_queue_type qtype, - u8 tc, - u8 index, - struct dpni_queue *queue, - struct dpni_queue_id *qid); - -/** - * enum dpni_congestion_unit - DPNI congestion units - * @DPNI_CONGESTION_UNIT_BYTES: bytes units - * @DPNI_CONGESTION_UNIT_FRAMES: frames units - */ -enum dpni_congestion_unit { - DPNI_CONGESTION_UNIT_BYTES = 0, - DPNI_CONGESTION_UNIT_FRAMES -}; - -/** - * enum dpni_congestion_point - Structure representing congestion point - * @DPNI_CP_QUEUE: Set taildrop per queue, identified by QUEUE_TYPE, TC and - * QUEUE_INDEX - * @DPNI_CP_GROUP: Set taildrop per queue group. Depending on options used to - * define the DPNI this can be either per TC (default) or per - * interface (DPNI_OPT_SHARED_CONGESTION set at DPNI create). - * QUEUE_INDEX is ignored if this type is used. - */ -enum dpni_congestion_point { - DPNI_CP_QUEUE, - DPNI_CP_GROUP, -}; - -/** - * struct dpni_taildrop - Structure representing the taildrop - * @enable: Indicates whether the taildrop is active or not. - * @units: Indicates the unit of THRESHOLD. Queue taildrop only supports - * byte units, this field is ignored and assumed = 0 if - * CONGESTION_POINT is 0. - * @threshold: Threshold value, in units identified by UNITS field. Value 0 - * cannot be used as a valid taildrop threshold, THRESHOLD must - * be > 0 if the taildrop is enabled. - */ -struct dpni_taildrop { - char enable; - enum dpni_congestion_unit units; - u32 threshold; -}; - -int dpni_set_taildrop(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - enum dpni_congestion_point cg_point, - enum dpni_queue_type q_type, - u8 tc, - u8 q_index, - struct dpni_taildrop *taildrop); - -int dpni_get_taildrop(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 token, - enum dpni_congestion_point cg_point, - enum dpni_queue_type q_type, - u8 tc, - u8 q_index, - struct dpni_taildrop *taildrop); - -/** - * struct dpni_rule_cfg - Rule configuration for table lookup - * @key_iova: I/O virtual address of the key (must be in DMA-able memory) - * @mask_iova: I/O virtual address of the mask (must be in DMA-able memory) - * @key_size: key and mask size (in bytes) - */ -struct dpni_rule_cfg { - u64 key_iova; - u64 mask_iova; - u8 key_size; -}; - -int dpni_get_api_version(struct fsl_mc_io *mc_io, - u32 cmd_flags, - u16 *major_ver, - u16 *minor_ver); - -#endif /* __FSL_DPNI_H */ |