diff options
Diffstat (limited to 'drivers/staging/media/deprecated/atmel/atmel-isc-base.c')
| -rw-r--r-- | drivers/staging/media/deprecated/atmel/atmel-isc-base.c | 2011 |
1 files changed, 2011 insertions, 0 deletions
diff --git a/drivers/staging/media/deprecated/atmel/atmel-isc-base.c b/drivers/staging/media/deprecated/atmel/atmel-isc-base.c new file mode 100644 index 000000000000..99e61bbfc9bc --- /dev/null +++ b/drivers/staging/media/deprecated/atmel/atmel-isc-base.c @@ -0,0 +1,2011 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Microchip Image Sensor Controller (ISC) common driver base + * + * Copyright (C) 2016-2019 Microchip Technology, Inc. + * + * Author: Songjun Wu + * Author: Eugen Hristev <eugen.hristev@microchip.com> + * + */ +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_graph.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/videodev2.h> +#include <linux/atmel-isc-media.h> + +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-event.h> +#include <media/v4l2-image-sizes.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-fwnode.h> +#include <media/v4l2-subdev.h> +#include <media/videobuf2-dma-contig.h> + +#include "atmel-isc-regs.h" +#include "atmel-isc.h" + +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "debug level (0-2)"); + +static unsigned int sensor_preferred = 1; +module_param(sensor_preferred, uint, 0644); +MODULE_PARM_DESC(sensor_preferred, + "Sensor is preferred to output the specified format (1-on 0-off), default 1"); + +#define ISC_IS_FORMAT_RAW(mbus_code) \ + (((mbus_code) & 0xf000) == 0x3000) + +#define ISC_IS_FORMAT_GREY(mbus_code) \ + (((mbus_code) == MEDIA_BUS_FMT_Y10_1X10) | \ + (((mbus_code) == MEDIA_BUS_FMT_Y8_1X8))) + +static inline void isc_update_v4l2_ctrls(struct isc_device *isc) +{ + struct isc_ctrls *ctrls = &isc->ctrls; + + /* In here we set the v4l2 controls w.r.t. our pipeline config */ + v4l2_ctrl_s_ctrl(isc->r_gain_ctrl, ctrls->gain[ISC_HIS_CFG_MODE_R]); + v4l2_ctrl_s_ctrl(isc->b_gain_ctrl, ctrls->gain[ISC_HIS_CFG_MODE_B]); + v4l2_ctrl_s_ctrl(isc->gr_gain_ctrl, ctrls->gain[ISC_HIS_CFG_MODE_GR]); + v4l2_ctrl_s_ctrl(isc->gb_gain_ctrl, ctrls->gain[ISC_HIS_CFG_MODE_GB]); + + v4l2_ctrl_s_ctrl(isc->r_off_ctrl, ctrls->offset[ISC_HIS_CFG_MODE_R]); + v4l2_ctrl_s_ctrl(isc->b_off_ctrl, ctrls->offset[ISC_HIS_CFG_MODE_B]); + v4l2_ctrl_s_ctrl(isc->gr_off_ctrl, ctrls->offset[ISC_HIS_CFG_MODE_GR]); + v4l2_ctrl_s_ctrl(isc->gb_off_ctrl, ctrls->offset[ISC_HIS_CFG_MODE_GB]); +} + +static inline void isc_update_awb_ctrls(struct isc_device *isc) +{ + struct isc_ctrls *ctrls = &isc->ctrls; + + /* In here we set our actual hw pipeline config */ + + regmap_write(isc->regmap, ISC_WB_O_RGR, + ((ctrls->offset[ISC_HIS_CFG_MODE_R])) | + ((ctrls->offset[ISC_HIS_CFG_MODE_GR]) << 16)); + regmap_write(isc->regmap, ISC_WB_O_BGB, + ((ctrls->offset[ISC_HIS_CFG_MODE_B])) | + ((ctrls->offset[ISC_HIS_CFG_MODE_GB]) << 16)); + regmap_write(isc->regmap, ISC_WB_G_RGR, + ctrls->gain[ISC_HIS_CFG_MODE_R] | + (ctrls->gain[ISC_HIS_CFG_MODE_GR] << 16)); + regmap_write(isc->regmap, ISC_WB_G_BGB, + ctrls->gain[ISC_HIS_CFG_MODE_B] | + (ctrls->gain[ISC_HIS_CFG_MODE_GB] << 16)); +} + +static inline void isc_reset_awb_ctrls(struct isc_device *isc) +{ + unsigned int c; + + for (c = ISC_HIS_CFG_MODE_GR; c <= ISC_HIS_CFG_MODE_B; c++) { + /* gains have a fixed point at 9 decimals */ + isc->ctrls.gain[c] = 1 << 9; + /* offsets are in 2's complements */ + isc->ctrls.offset[c] = 0; + } +} + + +static int isc_queue_setup(struct vb2_queue *vq, + unsigned int *nbuffers, unsigned int *nplanes, + unsigned int sizes[], struct device *alloc_devs[]) +{ + struct isc_device *isc = vb2_get_drv_priv(vq); + unsigned int size = isc->fmt.fmt.pix.sizeimage; + + if (*nplanes) + return sizes[0] < size ? -EINVAL : 0; + + *nplanes = 1; + sizes[0] = size; + + return 0; +} + +static int isc_buffer_prepare(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct isc_device *isc = vb2_get_drv_priv(vb->vb2_queue); + unsigned long size = isc->fmt.fmt.pix.sizeimage; + + if (vb2_plane_size(vb, 0) < size) { + v4l2_err(&isc->v4l2_dev, "buffer too small (%lu < %lu)\n", + vb2_plane_size(vb, 0), size); + return -EINVAL; + } + + vb2_set_plane_payload(vb, 0, size); + + vbuf->field = isc->fmt.fmt.pix.field; + + return 0; +} + +static void isc_crop_pfe(struct isc_device *isc) +{ + struct regmap *regmap = isc->regmap; + u32 h, w; + + h = isc->fmt.fmt.pix.height; + w = isc->fmt.fmt.pix.width; + + /* + * In case the sensor is not RAW, it will output a pixel (12-16 bits) + * with two samples on the ISC Data bus (which is 8-12) + * ISC will count each sample, so, we need to multiply these values + * by two, to get the real number of samples for the required pixels. + */ + if (!ISC_IS_FORMAT_RAW(isc->config.sd_format->mbus_code)) { + h <<= 1; + w <<= 1; + } + + /* + * We limit the column/row count that the ISC will output according + * to the configured resolution that we want. + * This will avoid the situation where the sensor is misconfigured, + * sending more data, and the ISC will just take it and DMA to memory, + * causing corruption. + */ + regmap_write(regmap, ISC_PFE_CFG1, + (ISC_PFE_CFG1_COLMIN(0) & ISC_PFE_CFG1_COLMIN_MASK) | + (ISC_PFE_CFG1_COLMAX(w - 1) & ISC_PFE_CFG1_COLMAX_MASK)); + + regmap_write(regmap, ISC_PFE_CFG2, + (ISC_PFE_CFG2_ROWMIN(0) & ISC_PFE_CFG2_ROWMIN_MASK) | + (ISC_PFE_CFG2_ROWMAX(h - 1) & ISC_PFE_CFG2_ROWMAX_MASK)); + + regmap_update_bits(regmap, ISC_PFE_CFG0, + ISC_PFE_CFG0_COLEN | ISC_PFE_CFG0_ROWEN, + ISC_PFE_CFG0_COLEN | ISC_PFE_CFG0_ROWEN); +} + +static void isc_start_dma(struct isc_device *isc) +{ + struct regmap *regmap = isc->regmap; + u32 sizeimage = isc->fmt.fmt.pix.sizeimage; + u32 dctrl_dview; + dma_addr_t addr0; + + addr0 = vb2_dma_contig_plane_dma_addr(&isc->cur_frm->vb.vb2_buf, 0); + regmap_write(regmap, ISC_DAD0 + isc->offsets.dma, addr0); + + switch (isc->config.fourcc) { + case V4L2_PIX_FMT_YUV420: + regmap_write(regmap, ISC_DAD1 + isc->offsets.dma, + addr0 + (sizeimage * 2) / 3); + regmap_write(regmap, ISC_DAD2 + isc->offsets.dma, + addr0 + (sizeimage * 5) / 6); + break; + case V4L2_PIX_FMT_YUV422P: + regmap_write(regmap, ISC_DAD1 + isc->offsets.dma, + addr0 + sizeimage / 2); + regmap_write(regmap, ISC_DAD2 + isc->offsets.dma, + addr0 + (sizeimage * 3) / 4); + break; + default: + break; + } + + dctrl_dview = isc->config.dctrl_dview; + + regmap_write(regmap, ISC_DCTRL + isc->offsets.dma, + dctrl_dview | ISC_DCTRL_IE_IS); + spin_lock(&isc->awb_lock); + regmap_write(regmap, ISC_CTRLEN, ISC_CTRL_CAPTURE); + spin_unlock(&isc->awb_lock); +} + +static void isc_set_pipeline(struct isc_device *isc, u32 pipeline) +{ + struct regmap *regmap = isc->regmap; + struct isc_ctrls *ctrls = &isc->ctrls; + u32 val, bay_cfg; + const u32 *gamma; + unsigned int i; + + /* WB-->CFA-->CC-->GAM-->CSC-->CBC-->SUB422-->SUB420 */ + for (i = 0; i < ISC_PIPE_LINE_NODE_NUM; i++) { + val = pipeline & BIT(i) ? 1 : 0; + regmap_field_write(isc->pipeline[i], val); + } + + if (!pipeline) + return; + + bay_cfg = isc->config.sd_format->cfa_baycfg; + + regmap_write(regmap, ISC_WB_CFG, bay_cfg); + isc_update_awb_ctrls(isc); + isc_update_v4l2_ctrls(isc); + + regmap_write(regmap, ISC_CFA_CFG, bay_cfg | ISC_CFA_CFG_EITPOL); + + gamma = &isc->gamma_table[ctrls->gamma_index][0]; + regmap_bulk_write(regmap, ISC_GAM_BENTRY, gamma, GAMMA_ENTRIES); + regmap_bulk_write(regmap, ISC_GAM_GENTRY, gamma, GAMMA_ENTRIES); + regmap_bulk_write(regmap, ISC_GAM_RENTRY, gamma, GAMMA_ENTRIES); + + isc->config_dpc(isc); + isc->config_csc(isc); + isc->config_cbc(isc); + isc->config_cc(isc); + isc->config_gam(isc); +} + +static int isc_update_profile(struct isc_device *isc) +{ + struct regmap *regmap = isc->regmap; + u32 sr; + int counter = 100; + + regmap_write(regmap, ISC_CTRLEN, ISC_CTRL_UPPRO); + + regmap_read(regmap, ISC_CTRLSR, &sr); + while ((sr & ISC_CTRL_UPPRO) && counter--) { + usleep_range(1000, 2000); + regmap_read(regmap, ISC_CTRLSR, &sr); + } + + if (counter < 0) { + v4l2_warn(&isc->v4l2_dev, "Time out to update profile\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static void isc_set_histogram(struct isc_device *isc, bool enable) +{ + struct regmap *regmap = isc->regmap; + struct isc_ctrls *ctrls = &isc->ctrls; + + if (enable) { + regmap_write(regmap, ISC_HIS_CFG + isc->offsets.his, + ISC_HIS_CFG_MODE_GR | + (isc->config.sd_format->cfa_baycfg + << ISC_HIS_CFG_BAYSEL_SHIFT) | + ISC_HIS_CFG_RAR); + regmap_write(regmap, ISC_HIS_CTRL + isc->offsets.his, + ISC_HIS_CTRL_EN); + regmap_write(regmap, ISC_INTEN, ISC_INT_HISDONE); + ctrls->hist_id = ISC_HIS_CFG_MODE_GR; + isc_update_profile(isc); + regmap_write(regmap, ISC_CTRLEN, ISC_CTRL_HISREQ); + + ctrls->hist_stat = HIST_ENABLED; + } else { + regmap_write(regmap, ISC_INTDIS, ISC_INT_HISDONE); + regmap_write(regmap, ISC_HIS_CTRL + isc->offsets.his, + ISC_HIS_CTRL_DIS); + + ctrls->hist_stat = HIST_DISABLED; + } +} + +static int isc_configure(struct isc_device *isc) +{ + struct regmap *regmap = isc->regmap; + u32 pfe_cfg0, dcfg, mask, pipeline; + struct isc_subdev_entity *subdev = isc->current_subdev; + + pfe_cfg0 = isc->config.sd_format->pfe_cfg0_bps; + pipeline = isc->config.bits_pipeline; + + dcfg = isc->config.dcfg_imode | isc->dcfg; + + pfe_cfg0 |= subdev->pfe_cfg0 | ISC_PFE_CFG0_MODE_PROGRESSIVE; + mask = ISC_PFE_CFG0_BPS_MASK | ISC_PFE_CFG0_HPOL_LOW | + ISC_PFE_CFG0_VPOL_LOW | ISC_PFE_CFG0_PPOL_LOW | + ISC_PFE_CFG0_MODE_MASK | ISC_PFE_CFG0_CCIR_CRC | + ISC_PFE_CFG0_CCIR656 | ISC_PFE_CFG0_MIPI; + + regmap_update_bits(regmap, ISC_PFE_CFG0, mask, pfe_cfg0); + + isc->config_rlp(isc); + + regmap_write(regmap, ISC_DCFG + isc->offsets.dma, dcfg); + + /* Set the pipeline */ + isc_set_pipeline(isc, pipeline); + + /* + * The current implemented histogram is available for RAW R, B, GB, GR + * channels. We need to check if sensor is outputting RAW BAYER + */ + if (isc->ctrls.awb && + ISC_IS_FORMAT_RAW(isc->config.sd_format->mbus_code)) + isc_set_histogram(isc, true); + else + isc_set_histogram(isc, false); + + /* Update profile */ + return isc_update_profile(isc); +} + +static int isc_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct isc_device *isc = vb2_get_drv_priv(vq); + struct regmap *regmap = isc->regmap; + struct isc_buffer *buf; + unsigned long flags; + int ret; + + /* Enable stream on the sub device */ + ret = v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 1); + if (ret && ret != -ENOIOCTLCMD) { + v4l2_err(&isc->v4l2_dev, "stream on failed in subdev %d\n", + ret); + goto err_start_stream; + } + + ret = pm_runtime_resume_and_get(isc->dev); + if (ret < 0) { + v4l2_err(&isc->v4l2_dev, "RPM resume failed in subdev %d\n", + ret); + goto err_pm_get; + } + + ret = isc_configure(isc); + if (unlikely(ret)) + goto err_configure; + + /* Enable DMA interrupt */ + regmap_write(regmap, ISC_INTEN, ISC_INT_DDONE); + + spin_lock_irqsave(&isc->dma_queue_lock, flags); + + isc->sequence = 0; + isc->stop = false; + reinit_completion(&isc->comp); + + isc->cur_frm = list_first_entry(&isc->dma_queue, + struct isc_buffer, list); + list_del(&isc->cur_frm->list); + + isc_crop_pfe(isc); + isc_start_dma(isc); + + spin_unlock_irqrestore(&isc->dma_queue_lock, flags); + + /* if we streaming from RAW, we can do one-shot white balance adj */ + if (ISC_IS_FORMAT_RAW(isc->config.sd_format->mbus_code)) + v4l2_ctrl_activate(isc->do_wb_ctrl, true); + + return 0; + +err_configure: + pm_runtime_put_sync(isc->dev); +err_pm_get: + v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0); + +err_start_stream: + spin_lock_irqsave(&isc->dma_queue_lock, flags); + list_for_each_entry(buf, &isc->dma_queue, list) + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED); + INIT_LIST_HEAD(&isc->dma_queue); + spin_unlock_irqrestore(&isc->dma_queue_lock, flags); + + return ret; +} + +static void isc_stop_streaming(struct vb2_queue *vq) +{ + struct isc_device *isc = vb2_get_drv_priv(vq); + unsigned long flags; + struct isc_buffer *buf; + int ret; + + mutex_lock(&isc->awb_mutex); + v4l2_ctrl_activate(isc->do_wb_ctrl, false); + + isc->stop = true; + + /* Wait until the end of the current frame */ + if (isc->cur_frm && !wait_for_completion_timeout(&isc->comp, 5 * HZ)) + v4l2_err(&isc->v4l2_dev, + "Timeout waiting for end of the capture\n"); + + mutex_unlock(&isc->awb_mutex); + + /* Disable DMA interrupt */ + regmap_write(isc->regmap, ISC_INTDIS, ISC_INT_DDONE); + + pm_runtime_put_sync(isc->dev); + + /* Disable stream on the sub device */ + ret = v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0); + if (ret && ret != -ENOIOCTLCMD) + v4l2_err(&isc->v4l2_dev, "stream off failed in subdev\n"); + + /* Release all active buffers */ + spin_lock_irqsave(&isc->dma_queue_lock, flags); + if (unlikely(isc->cur_frm)) { + vb2_buffer_done(&isc->cur_frm->vb.vb2_buf, + VB2_BUF_STATE_ERROR); + isc->cur_frm = NULL; + } + list_for_each_entry(buf, &isc->dma_queue, list) + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR); + INIT_LIST_HEAD(&isc->dma_queue); + spin_unlock_irqrestore(&isc->dma_queue_lock, flags); +} + +static void isc_buffer_queue(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct isc_buffer *buf = container_of(vbuf, struct isc_buffer, vb); + struct isc_device *isc = vb2_get_drv_priv(vb->vb2_queue); + unsigned long flags; + + spin_lock_irqsave(&isc->dma_queue_lock, flags); + if (!isc->cur_frm && list_empty(&isc->dma_queue) && + vb2_start_streaming_called(vb->vb2_queue)) { + isc->cur_frm = buf; + isc_start_dma(isc); + } else + list_add_tail(&buf->list, &isc->dma_queue); + spin_unlock_irqrestore(&isc->dma_queue_lock, flags); +} + +static struct isc_format *find_format_by_fourcc(struct isc_device *isc, + unsigned int fourcc) +{ + unsigned int num_formats = isc->num_user_formats; + struct isc_format *fmt; + unsigned int i; + + for (i = 0; i < num_formats; i++) { + fmt = isc->user_formats[i]; + if (fmt->fourcc == fourcc) + return fmt; + } + + return NULL; +} + +static const struct vb2_ops isc_vb2_ops = { + .queue_setup = isc_queue_setup, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .buf_prepare = isc_buffer_prepare, + .start_streaming = isc_start_streaming, + .stop_streaming = isc_stop_streaming, + .buf_queue = isc_buffer_queue, +}; + +static int isc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct isc_device *isc = video_drvdata(file); + + strscpy(cap->driver, "microchip-isc", sizeof(cap->driver)); + strscpy(cap->card, "Atmel Image Sensor Controller", sizeof(cap->card)); + snprintf(cap->bus_info, sizeof(cap->bus_info), + "platform:%s", isc->v4l2_dev.name); + + return 0; +} + +static int isc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + struct isc_device *isc = video_drvdata(file); + u32 index = f->index; + u32 i, supported_index; + + if (index < isc->controller_formats_size) { + f->pixelformat = isc->controller_formats[index].fourcc; + return 0; + } + + index -= isc->controller_formats_size; + + supported_index = 0; + + for (i = 0; i < isc->formats_list_size; i++) { + if (!ISC_IS_FORMAT_RAW(isc->formats_list[i].mbus_code) || + !isc->formats_list[i].sd_support) + continue; + if (supported_index == index) { + f->pixelformat = isc->formats_list[i].fourcc; + return 0; + } + supported_index++; + } + + return -EINVAL; +} + +static int isc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *fmt) +{ + struct isc_device *isc = video_drvdata(file); + + *fmt = isc->fmt; + + return 0; +} + +/* + * Checks the current configured format, if ISC can output it, + * considering which type of format the ISC receives from the sensor + */ +static int isc_try_validate_formats(struct isc_device *isc) +{ + int ret; + bool bayer = false, yuv = false, rgb = false, grey = false; + + /* all formats supported by the RLP module are OK */ + switch (isc->try_config.fourcc) { + case V4L2_PIX_FMT_SBGGR8: + case V4L2_PIX_FMT_SGBRG8: + case V4L2_PIX_FMT_SGRBG8: + case V4L2_PIX_FMT_SRGGB8: + case V4L2_PIX_FMT_SBGGR10: + case V4L2_PIX_FMT_SGBRG10: + case V4L2_PIX_FMT_SGRBG10: + case V4L2_PIX_FMT_SRGGB10: + case V4L2_PIX_FMT_SBGGR12: + case V4L2_PIX_FMT_SGBRG12: + case V4L2_PIX_FMT_SGRBG12: + case V4L2_PIX_FMT_SRGGB12: + ret = 0; + bayer = true; + break; + + case V4L2_PIX_FMT_YUV420: + case V4L2_PIX_FMT_YUV422P: + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_VYUY: + ret = 0; + yuv = true; + break; + + case V4L2_PIX_FMT_RGB565: + case V4L2_PIX_FMT_ABGR32: + case V4L2_PIX_FMT_XBGR32: + case V4L2_PIX_FMT_ARGB444: + case V4L2_PIX_FMT_ARGB555: + ret = 0; + rgb = true; + break; + case V4L2_PIX_FMT_GREY: + case V4L2_PIX_FMT_Y10: + case V4L2_PIX_FMT_Y16: + ret = 0; + grey = true; + break; + default: + /* any other different formats are not supported */ + ret = -EINVAL; + } + v4l2_dbg(1, debug, &isc->v4l2_dev, + "Format validation, requested rgb=%u, yuv=%u, grey=%u, bayer=%u\n", + rgb, yuv, grey, bayer); + + /* we cannot output RAW if we do not receive RAW */ + if ((bayer) && !ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) + return -EINVAL; + + /* we cannot output GREY if we do not receive RAW/GREY */ + if (grey && !ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code) && + !ISC_IS_FORMAT_GREY(isc->try_config.sd_format->mbus_code)) + return -EINVAL; + + return ret; +} + +/* + * Configures the RLP and DMA modules, depending on the output format + * configured for the ISC. + * If direct_dump == true, just dump raw data 8/16 bits depending on format. + */ +static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump) +{ + isc->try_config.rlp_cfg_mode = 0; + + switch (isc->try_config.fourcc) { + case V4L2_PIX_FMT_SBGGR8: + case V4L2_PIX_FMT_SGBRG8: + case V4L2_PIX_FMT_SGRBG8: + case V4L2_PIX_FMT_SRGGB8: + isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT8; + isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED8; + isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; + isc->try_config.bpp = 8; + isc->try_config.bpp_v4l2 = 8; + break; + case V4L2_PIX_FMT_SBGGR10: + case V4L2_PIX_FMT_SGBRG10: + case V4L2_PIX_FMT_SGRBG10: + case V4L2_PIX_FMT_SRGGB10: + isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT10; + isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; + isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; + isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; + break; + case V4L2_PIX_FMT_SBGGR12: + case V4L2_PIX_FMT_SGBRG12: + case V4L2_PIX_FMT_SGRBG12: + case V4L2_PIX_FMT_SRGGB12: + isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT12; + isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; + isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; + isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; + break; + case V4L2_PIX_FMT_RGB565: + isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_RGB565; + isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; + isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; + isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; + break; + case V4L2_PIX_FMT_ARGB444: + isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_ARGB444; + isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; + isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; + isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; + break; + case V4L2_PIX_FMT_ARGB555: + isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_ARGB555; + isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; + isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; + isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; + break; + case V4L2_PIX_FMT_ABGR32: + case V4L2_PIX_FMT_XBGR32: + isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_ARGB32; + isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32; + isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; + isc->try_config.bpp = 32; + isc->try_config.bpp_v4l2 = 32; + break; + case V4L2_PIX_FMT_YUV420: + isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YYCC; + isc->try_config.dcfg_imode = ISC_DCFG_IMODE_YC420P; + isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PLANAR; + isc->try_config.bpp = 12; + isc->try_config.bpp_v4l2 = 8; /* only first plane */ + break; + case V4L2_PIX_FMT_YUV422P: + isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YYCC; + isc->try_config.dcfg_imode = ISC_DCFG_IMODE_YC422P; + isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PLANAR; + isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 8; /* only first plane */ + break; + case V4L2_PIX_FMT_YUYV: + isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_YUYV; + isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32; + isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; + isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; + break; + case V4L2_PIX_FMT_UYVY: + isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_UYVY; + isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32; + isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; + isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; + break; + case V4L2_PIX_FMT_VYUY: + isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_VYUY; + isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32; + isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; + isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; + break; + case V4L2_PIX_FMT_GREY: + isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DATY8; + isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED8; + isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; + isc->try_config.bpp = 8; + isc->try_config.bpp_v4l2 = 8; + break; + case V4L2_PIX_FMT_Y16: + isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DATY10 | ISC_RLP_CFG_LSH; + fallthrough; + case V4L2_PIX_FMT_Y10: + isc->try_config.rlp_cfg_mode |= ISC_RLP_CFG_MODE_DATY10; + isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16; + isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; + isc->try_config.bpp = 16; + isc->try_config.bpp_v4l2 = 16; + break; + default: + return -EINVAL; + } + + if (direct_dump) { + isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DAT8; + isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED8; + isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED; + return 0; + } + + return 0; +} + +/* + * Configuring pipeline modules, depending on which format the ISC outputs + * and considering which format it has as input from the sensor. + */ +static int isc_try_configure_pipeline(struct isc_device *isc) +{ + switch (isc->try_config.fourcc) { + case V4L2_PIX_FMT_RGB565: + case V4L2_PIX_FMT_ARGB555: + case V4L2_PIX_FMT_ARGB444: + case V4L2_PIX_FMT_ABGR32: + case V4L2_PIX_FMT_XBGR32: + /* if sensor format is RAW, we convert inside ISC */ + if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) { + isc->try_config.bits_pipeline = CFA_ENABLE | + WB_ENABLE | GAM_ENABLES | DPC_BLCENABLE | + CC_ENABLE; + } else { + isc->try_config.bits_pipeline = 0x0; + } + break; + case V4L2_PIX_FMT_YUV420: + /* if sensor format is RAW, we convert inside ISC */ + if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) { + isc->try_config.bits_pipeline = CFA_ENABLE | + CSC_ENABLE | GAM_ENABLES | WB_ENABLE | + SUB420_ENABLE | SUB422_ENABLE | CBC_ENABLE | + DPC_BLCENABLE; + } else { + isc->try_config.bits_pipeline = 0x0; + } + break; + case V4L2_PIX_FMT_YUV422P: + /* if sensor format is RAW, we convert inside ISC */ + if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) { + isc->try_config.bits_pipeline = CFA_ENABLE | + CSC_ENABLE | WB_ENABLE | GAM_ENABLES | + SUB422_ENABLE | CBC_ENABLE | DPC_BLCENABLE; + } else { + isc->try_config.bits_pipeline = 0x0; + } + break; + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_UYVY: + case V4L2_PIX_FMT_VYUY: + /* if sensor format is RAW, we convert inside ISC */ + if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) { + isc->try_config.bits_pipeline = CFA_ENABLE | + CSC_ENABLE | WB_ENABLE | GAM_ENABLES | + SUB422_ENABLE | CBC_ENABLE | DPC_BLCENABLE; + } else { + isc->try_config.bits_pipeline = 0x0; + } + break; + case V4L2_PIX_FMT_GREY: + case V4L2_PIX_FMT_Y16: + /* if sensor format is RAW, we convert inside ISC */ + if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) { + isc->try_config.bits_pipeline = CFA_ENABLE | + CSC_ENABLE | WB_ENABLE | GAM_ENABLES | + CBC_ENABLE | DPC_BLCENABLE; + } else { + isc->try_config.bits_pipeline = 0x0; + } + break; + default: + if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) + isc->try_config.bits_pipeline = WB_ENABLE | DPC_BLCENABLE; + else + isc->try_config.bits_pipeline = 0x0; + } + + /* Tune the pipeline to product specific */ + isc->adapt_pipeline(isc); + + return 0; +} + +static void isc_try_fse(struct isc_device *isc, + struct v4l2_subdev_state *sd_state) +{ + int ret; + struct v4l2_subdev_frame_size_enum fse = {}; + + /* + * If we do not know yet which format the subdev is using, we cannot + * do anything. + */ + if (!isc->try_config.sd_format) + return; + + fse.code = isc->try_config.sd_format->mbus_code; + fse.which = V4L2_SUBDEV_FORMAT_TRY; + + ret = v4l2_subdev_call(isc->current_subdev->sd, pad, enum_frame_size, + sd_state, &fse); + /* + * Attempt to obtain format size from subdev. If not available, + * just use the maximum ISC can receive. + */ + if (ret) { + sd_state->pads->try_crop.width = isc->max_width; + sd_state->pads->try_crop.height = isc->max_height; + } else { + sd_state->pads->try_crop.width = fse.max_width; + sd_state->pads->try_crop.height = fse.max_height; + } +} + +static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f, + u32 *code) +{ + int i; + struct isc_format *sd_fmt = NULL, *direct_fmt = NULL; + struct v4l2_pix_format *pixfmt = &f->fmt.pix; + struct v4l2_subdev_pad_config pad_cfg = {}; + struct v4l2_subdev_state pad_state = { + .pads = &pad_cfg + }; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_TRY, + }; + u32 mbus_code; + int ret; + bool rlp_dma_direct_dump = false; + + if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + /* Step 1: find a RAW format that is supported */ + for (i = 0; i < isc->num_user_formats; i++) { + if (ISC_IS_FORMAT_RAW(isc->user_formats[i]->mbus_code)) { + sd_fmt = isc->user_formats[i]; + break; + } + } + /* Step 2: We can continue with this RAW format, or we can look + * for better: maybe sensor supports directly what we need. + */ + direct_fmt = find_format_by_fourcc(isc, pixfmt->pixelformat); + + /* Step 3: We have both. We decide given the module parameter which + * one to use. + */ + if (direct_fmt && sd_fmt && sensor_preferred) + sd_fmt = direct_fmt; + + /* Step 4: we do not have RAW but we have a direct format. Use it. */ + if (direct_fmt && !sd_fmt) + sd_fmt = direct_fmt; + + /* Step 5: if we are using a direct format, we need to package + * everything as 8 bit data and just dump it + */ + if (sd_fmt == direct_fmt) + rlp_dma_direct_dump = true; + + /* Step 6: We have no format. This can happen if the userspace + * requests some weird/invalid format. + * In this case, default to whatever we have + */ + if (!sd_fmt && !direct_fmt) { + sd_fmt = isc->user_formats[isc->num_user_formats - 1]; + v4l2_dbg(1, debug, &isc->v4l2_dev, + "Sensor not supporting %.4s, using %.4s\n", + (char *)&pixfmt->pixelformat, (char *)&sd_fmt->fourcc); + } + + if (!sd_fmt) { + ret = -EINVAL; + goto isc_try_fmt_err; + } + + /* Step 7: Print out what we decided for debugging */ + v4l2_dbg(1, debug, &isc->v4l2_dev, + "Preferring to have sensor using format %.4s\n", + (char *)&sd_fmt->fourcc); + + /* Step 8: at this moment we decided which format the subdev will use */ + isc->try_config.sd_format = sd_fmt; + + /* Limit to Atmel ISC hardware capabilities */ + if (pixfmt->width > isc->max_width) + pixfmt->width = isc->max_width; + if (pixfmt->height > isc->max_height) + pixfmt->height = isc->max_height; + + /* + * The mbus format is the one the subdev outputs. + * The pixels will be transferred in this format Sensor -> ISC + */ + mbus_code = sd_fmt->mbus_code; + + /* + * Validate formats. If the required format is not OK, default to raw. + */ + + isc->try_config.fourcc = pixfmt->pixelformat; + + if (isc_try_validate_formats(isc)) { + pixfmt->pixelformat = isc->try_config.fourcc = sd_fmt->fourcc; + /* Re-try to validate the new format */ + ret = isc_try_validate_formats(isc); + if (ret) + goto isc_try_fmt_err; + } + + ret = isc_try_configure_rlp_dma(isc, rlp_dma_direct_dump); + if (ret) + goto isc_try_fmt_err; + + ret = isc_try_configure_pipeline(isc); + if (ret) + goto isc_try_fmt_err; + + /* Obtain frame sizes if possible to have crop requirements ready */ + isc_try_fse(isc, &pad_state); + + v4l2_fill_mbus_format(&format.format, pixfmt, mbus_code); + ret = v4l2_subdev_call(isc->current_subdev->sd, pad, set_fmt, + &pad_state, &format); + if (ret < 0) + goto isc_try_fmt_subdev_err; + + v4l2_fill_pix_format(pixfmt, &format.format); + + /* Limit to Atmel ISC hardware capabilities */ + if (pixfmt->width > isc->max_width) + pixfmt->width = isc->max_width; + if (pixfmt->height > isc->max_height) + pixfmt->height = isc->max_height; + + pixfmt->field = V4L2_FIELD_NONE; + pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp_v4l2) >> 3; + pixfmt->sizeimage = ((pixfmt->width * isc->try_config.bpp) >> 3) * + pixfmt->height; + + if (code) + *code = mbus_code; + + return 0; + +isc_try_fmt_err: + v4l2_err(&isc->v4l2_dev, "Could not find any possible format for a working pipeline\n"); +isc_try_fmt_subdev_err: + memset(&isc->try_config, 0, sizeof(isc->try_config)); + + return ret; +} + +static int isc_set_fmt(struct isc_device *isc, struct v4l2_format *f) +{ + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + u32 mbus_code = 0; + int ret; + + ret = isc_try_fmt(isc, f, &mbus_code); + if (ret) + return ret; + + v4l2_fill_mbus_format(&format.format, &f->fmt.pix, mbus_code); + ret = v4l2_subdev_call(isc->current_subdev->sd, pad, + set_fmt, NULL, &format); + if (ret < 0) + return ret; + + /* Limit to Atmel ISC hardware capabilities */ + if (f->fmt.pix.width > isc->max_width) + f->fmt.pix.width = isc->max_width; + if (f->fmt.pix.height > isc->max_height) + f->fmt.pix.height = isc->max_height; + + isc->fmt = *f; + + if (isc->try_config.sd_format && isc->config.sd_format && + isc->try_config.sd_format != isc->config.sd_format) { + isc->ctrls.hist_stat = HIST_INIT; + isc_reset_awb_ctrls(isc); + isc_update_v4l2_ctrls(isc); + } + /* make the try configuration active */ + isc->config = isc->try_config; + + v4l2_dbg(1, debug, &isc->v4l2_dev, "New ISC configuration in place\n"); + + return 0; +} + +static int isc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct isc_device *isc = video_drvdata(file); + + if (vb2_is_busy(&isc->vb2_vidq)) + return -EBUSY; + + return isc_set_fmt(isc, f); +} + +static int isc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct isc_device *isc = video_drvdata(file); + + return isc_try_fmt(isc, f, NULL); +} + +static int isc_enum_input(struct file *file, void *priv, + struct v4l2_input *inp) +{ + if (inp->index != 0) + return -EINVAL; + + inp->type = V4L2_INPUT_TYPE_CAMERA; + inp->std = 0; + strscpy(inp->name, "Camera", sizeof(inp->name)); + + return 0; +} + +static int isc_g_input(struct file *file, void *priv, unsigned int *i) +{ + *i = 0; + + return 0; +} + +static int isc_s_input(struct file *file, void *priv, unsigned int i) +{ + if (i > 0) + return -EINVAL; + + return 0; +} + +static int isc_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a) +{ + struct isc_device *isc = video_drvdata(file); + + return v4l2_g_parm_cap(video_devdata(file), isc->current_subdev->sd, a); +} + +static int isc_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a) +{ + struct isc_device *isc = video_drvdata(file); + + return v4l2_s_parm_cap(video_devdata(file), isc->current_subdev->sd, a); +} + +static int isc_enum_framesizes(struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize) +{ + struct isc_device *isc = video_drvdata(file); + int ret = -EINVAL; + int i; + + if (fsize->index) + return -EINVAL; + + for (i = 0; i < isc->num_user_formats; i++) + if (isc->user_formats[i]->fourcc == fsize->pixel_format) + ret = 0; + + for (i = 0; i < isc->controller_formats_size; i++) + if (isc->controller_formats[i].fourcc == fsize->pixel_format) + ret = 0; + + if (ret) + return ret; + + fsize->type = V4L2_FRMSIZE_TYPE_CONTINUOUS; + + fsize->stepwise.min_width = 16; + fsize->stepwise.max_width = isc->max_width; + fsize->stepwise.min_height = 16; + fsize->stepwise.max_height = isc->max_height; + fsize->stepwise.step_width = 1; + fsize->stepwise.step_height = 1; + + return 0; +} + +static const struct v4l2_ioctl_ops isc_ioctl_ops = { + .vidioc_querycap = isc_querycap, + .vidioc_enum_fmt_vid_cap = isc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = isc_g_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = isc_s_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = isc_try_fmt_vid_cap, + + .vidioc_enum_input = isc_enum_input, + .vidioc_g_input = isc_g_input, + .vidioc_s_input = isc_s_input, + + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + + .vidioc_g_parm = isc_g_parm, + .vidioc_s_parm = isc_s_parm, + .vidioc_enum_framesizes = isc_enum_framesizes, + + .vidioc_log_status = v4l2_ctrl_log_status, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static int isc_open(struct file *file) +{ + struct isc_device *isc = video_drvdata(file); + struct v4l2_subdev *sd = isc->current_subdev->sd; + int ret; + + if (mutex_lock_interruptible(&isc->lock)) + return -ERESTARTSYS; + + ret = v4l2_fh_open(file); + if (ret < 0) + goto unlock; + + if (!v4l2_fh_is_singular_file(file)) + goto unlock; + + ret = v4l2_subdev_call(sd, core, s_power, 1); + if (ret < 0 && ret != -ENOIOCTLCMD) { + v4l2_fh_release(file); + goto unlock; + } + + ret = isc_set_fmt(isc, &isc->fmt); + if (ret) { + v4l2_subdev_call(sd, core, s_power, 0); + v4l2_fh_release(file); + } + +unlock: + mutex_unlock(&isc->lock); + return ret; +} + +static int isc_release(struct file *file) +{ + struct isc_device *isc = video_drvdata(file); + struct v4l2_subdev *sd = isc->current_subdev->sd; + bool fh_singular; + int ret; + + mutex_lock(&isc->lock); + + fh_singular = v4l2_fh_is_singular_file(file); + + ret = _vb2_fop_release(file, NULL); + + if (fh_singular) + v4l2_subdev_call(sd, core, s_power, 0); + + mutex_unlock(&isc->lock); + + return ret; +} + +static const struct v4l2_file_operations isc_fops = { + .owner = THIS_MODULE, + .open = isc_open, + .release = isc_release, + .unlocked_ioctl = video_ioctl2, + .read = vb2_fop_read, + .mmap = vb2_fop_mmap, + .poll = vb2_fop_poll, +}; + +irqreturn_t atmel_isc_interrupt(int irq, void *dev_id) +{ + struct isc_device *isc = (struct isc_device *)dev_id; + struct regmap *regmap = isc->regmap; + u32 isc_intsr, isc_intmask, pending; + irqreturn_t ret = IRQ_NONE; + + regmap_read(regmap, ISC_INTSR, &isc_intsr); + regmap_read(regmap, ISC_INTMASK, &isc_intmask); + + pending = isc_intsr & isc_intmask; + + if (likely(pending & ISC_INT_DDONE)) { + spin_lock(&isc->dma_queue_lock); + if (isc->cur_frm) { + struct vb2_v4l2_buffer *vbuf = &isc->cur_frm->vb; + struct vb2_buffer *vb = &vbuf->vb2_buf; + + vb->timestamp = ktime_get_ns(); + vbuf->sequence = isc->sequence++; + vb2_buffer_done(vb, VB2_BUF_STATE_DONE); + isc->cur_frm = NULL; + } + + if (!list_empty(&isc->dma_queue) && !isc->stop) { + isc->cur_frm = list_first_entry(&isc->dma_queue, + struct isc_buffer, list); + list_del(&isc->cur_frm->list); + + isc_start_dma(isc); + } + + if (isc->stop) + complete(&isc->comp); + + ret = IRQ_HANDLED; + spin_unlock(&isc->dma_queue_lock); + } + + if (pending & ISC_INT_HISDONE) { + schedule_work(&isc->awb_work); + ret = IRQ_HANDLED; + } + + return ret; +} +EXPORT_SYMBOL_GPL(atmel_isc_interrupt); + +static void isc_hist_count(struct isc_device *isc, u32 *min, u32 *max) +{ + struct regmap *regmap = isc->regmap; + struct isc_ctrls *ctrls = &isc->ctrls; + u32 *hist_count = &ctrls->hist_count[ctrls->hist_id]; + u32 *hist_entry = &ctrls->hist_entry[0]; + u32 i; + + *min = 0; + *max = HIST_ENTRIES; + + regmap_bulk_read(regmap, ISC_HIS_ENTRY + isc->offsets.his_entry, + hist_entry, HIST_ENTRIES); + + *hist_count = 0; + /* + * we deliberately ignore the end of the histogram, + * the most white pixels + */ + for (i = 1; i < HIST_ENTRIES; i++) { + if (*hist_entry && !*min) + *min = i; + if (*hist_entry) + *max = i; + *hist_count += i * (*hist_entry++); + } + + if (!*min) + *min = 1; + + v4l2_dbg(1, debug, &isc->v4l2_dev, + "isc wb: hist_id %u, hist_count %u", + ctrls->hist_id, *hist_count); +} + +static void isc_wb_update(struct isc_ctrls *ctrls) +{ + struct isc_device *isc = container_of(ctrls, struct isc_device, ctrls); + u32 *hist_count = &ctrls->hist_count[0]; + u32 c, offset[4]; + u64 avg = 0; + /* We compute two gains, stretch gain and grey world gain */ + u32 s_gain[4], gw_gain[4]; + + /* + * According to Grey World, we need to set gains for R/B to normalize + * them towards the green channel. + * Thus we want to keep Green as fixed and adjust only Red/Blue + * Compute the average of the both green channels first + */ + avg = (u64)hist_count[ISC_HIS_CFG_MODE_GR] + + (u64)hist_count[ISC_HIS_CFG_MODE_GB]; + avg >>= 1; + + v4l2_dbg(1, debug, &isc->v4l2_dev, + "isc wb: green components average %llu\n", avg); + + /* Green histogram is null, nothing to do */ + if (!avg) + return; + + for (c = ISC_HIS_CFG_MODE_GR; c <= ISC_HIS_CFG_MODE_B; c++) { + /* + * the color offset is the minimum value of the histogram. + * we stretch this color to the full range by substracting + * this value from the color component. + */ + offset[c] = ctrls->hist_minmax[c][HIST_MIN_INDEX]; + /* + * The offset is always at least 1. If the offset is 1, we do + * not need to adjust it, so our result must be zero. + * the offset is computed in a histogram on 9 bits (0..512) + * but the offset in register is based on + * 12 bits pipeline (0..4096). + * we need to shift with the 3 bits that the histogram is + * ignoring + */ + ctrls->offset[c] = (offset[c] - 1) << 3; + + /* + * the offset is then taken and converted to 2's complements, + * and must be negative, as we subtract this value from the + * color components + */ + ctrls->offset[c] = -ctrls->offset[c]; + + /* + * the stretch gain is the total number of histogram bins + * divided by the actual range of color component (Max - Min) + * If we compute gain like this, the actual color component + * will be stretched to the full histogram. + * We need to shift 9 bits for precision, we have 9 bits for + * decimals + */ + s_gain[c] = (HIST_ENTRIES << 9) / + (ctrls->hist_minmax[c][HIST_MAX_INDEX] - + ctrls->hist_minmax[c][HIST_MIN_INDEX] + 1); + + /* + * Now we have to compute the gain w.r.t. the average. + * Add/lose gain to the component towards the average. + * If it happens that the component is zero, use the + * fixed point value : 1.0 gain. + */ + if (hist_count[c]) + gw_gain[c] = div_u64(avg << 9, hist_count[c]); + else + gw_gain[c] = 1 << 9; + + v4l2_dbg(1, debug, &isc->v4l2_dev, + "isc wb: component %d, s_gain %u, gw_gain %u\n", + c, s_gain[c], gw_gain[c]); + /* multiply both gains and adjust for decimals */ + ctrls->gain[c] = s_gain[c] * gw_gain[c]; + ctrls->gain[c] >>= 9; + + /* make sure we are not out of range */ + ctrls->gain[c] = clamp_val(ctrls->gain[c], 0, GENMASK(12, 0)); + + v4l2_dbg(1, debug, &isc->v4l2_dev, + "isc wb: component %d, final gain %u\n", + c, ctrls->gain[c]); + } +} + +static void isc_awb_work(struct work_struct *w) +{ + struct isc_device *isc = + container_of(w, struct isc_device, awb_work); + struct regmap *regmap = isc->regmap; + struct isc_ctrls *ctrls = &isc->ctrls; + u32 hist_id = ctrls->hist_id; + u32 baysel; + unsigned long flags; + u32 min, max; + int ret; + + if (ctrls->hist_stat != HIST_ENABLED) + return; + + isc_hist_count(isc, &min, &max); + + v4l2_dbg(1, debug, &isc->v4l2_dev, + "isc wb mode %d: hist min %u , max %u\n", hist_id, min, max); + + ctrls->hist_minmax[hist_id][HIST_MIN_INDEX] = min; + ctrls->hist_minmax[hist_id][HIST_MAX_INDEX] = max; + + if (hist_id != ISC_HIS_CFG_MODE_B) { + hist_id++; + } else { + isc_wb_update(ctrls); + hist_id = ISC_HIS_CFG_MODE_GR; + } + + ctrls->hist_id = hist_id; + baysel = isc->config.sd_format->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT; + + ret = pm_runtime_resume_and_get(isc->dev); + if (ret < 0) + return; + + /* + * only update if we have all the required histograms and controls + * if awb has been disabled, we need to reset registers as well. + */ + if (hist_id == ISC_HIS_CFG_MODE_GR || ctrls->awb == ISC_WB_NONE) { + /* + * It may happen that DMA Done IRQ will trigger while we are + * updating white balance registers here. + * In that case, only parts of the controls have been updated. + * We can avoid that by locking the section. + */ + spin_lock_irqsave(&isc->awb_lock, flags); + isc_update_awb_ctrls(isc); + spin_unlock_irqrestore(&isc->awb_lock, flags); + + /* + * if we are doing just the one time white balance adjustment, + * we are basically done. + */ + if (ctrls->awb == ISC_WB_ONETIME) { + v4l2_info(&isc->v4l2_dev, + "Completed one time white-balance adjustment.\n"); + /* update the v4l2 controls values */ + isc_update_v4l2_ctrls(isc); + ctrls->awb = ISC_WB_NONE; + } + } + regmap_write(regmap, ISC_HIS_CFG + isc->offsets.his, + hist_id | baysel | ISC_HIS_CFG_RAR); + + /* + * We have to make sure the streaming has not stopped meanwhile. + * ISC requires a frame to clock the internal profile update. + * To avoid issues, lock the sequence with a mutex + */ + mutex_lock(&isc->awb_mutex); + + /* streaming is not active anymore */ + if (isc->stop) { + mutex_unlock(&isc->awb_mutex); + return; + } + + isc_update_profile(isc); + + mutex_unlock(&isc->awb_mutex); + + /* if awb has been disabled, we don't need to start another histogram */ + if (ctrls->awb) + regmap_write(regmap, ISC_CTRLEN, ISC_CTRL_HISREQ); + + pm_runtime_put_sync(isc->dev); +} + +static int isc_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct isc_device *isc = container_of(ctrl->handler, + struct isc_device, ctrls.handler); + struct isc_ctrls *ctrls = &isc->ctrls; + + if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE) + return 0; + + switch (ctrl->id) { + case V4L2_CID_BRIGHTNESS: + ctrls->brightness = ctrl->val & ISC_CBC_BRIGHT_MASK; + break; + case V4L2_CID_CONTRAST: + ctrls->contrast = ctrl->val & ISC_CBC_CONTRAST_MASK; + break; + case V4L2_CID_GAMMA: + ctrls->gamma_index = ctrl->val; + break; + default: + return -EINVAL; + } + + return 0; +} + +static const struct v4l2_ctrl_ops isc_ctrl_ops = { + .s_ctrl = isc_s_ctrl, +}; + +static int isc_s_awb_ctrl(struct v4l2_ctrl *ctrl) +{ + struct isc_device *isc = container_of(ctrl->handler, + struct isc_device, ctrls.handler); + struct isc_ctrls *ctrls = &isc->ctrls; + + if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE) + return 0; + + switch (ctrl->id) { + case V4L2_CID_AUTO_WHITE_BALANCE: + if (ctrl->val == 1) + ctrls->awb = ISC_WB_AUTO; + else + ctrls->awb = ISC_WB_NONE; + + /* configure the controls with new values from v4l2 */ + if (ctrl->cluster[ISC_CTRL_R_GAIN]->is_new) + ctrls->gain[ISC_HIS_CFG_MODE_R] = isc->r_gain_ctrl->val; + if (ctrl->cluster[ISC_CTRL_B_GAIN]->is_new) + ctrls->gain[ISC_HIS_CFG_MODE_B] = isc->b_gain_ctrl->val; + if (ctrl->cluster[ISC_CTRL_GR_GAIN]->is_new) + ctrls->gain[ISC_HIS_CFG_MODE_GR] = isc->gr_gain_ctrl->val; + if (ctrl->cluster[ISC_CTRL_GB_GAIN]->is_new) + ctrls->gain[ISC_HIS_CFG_MODE_GB] = isc->gb_gain_ctrl->val; + + if (ctrl->cluster[ISC_CTRL_R_OFF]->is_new) + ctrls->offset[ISC_HIS_CFG_MODE_R] = isc->r_off_ctrl->val; + if (ctrl->cluster[ISC_CTRL_B_OFF]->is_new) + ctrls->offset[ISC_HIS_CFG_MODE_B] = isc->b_off_ctrl->val; + if (ctrl->cluster[ISC_CTRL_GR_OFF]->is_new) + ctrls->offset[ISC_HIS_CFG_MODE_GR] = isc->gr_off_ctrl->val; + if (ctrl->cluster[ISC_CTRL_GB_OFF]->is_new) + ctrls->offset[ISC_HIS_CFG_MODE_GB] = isc->gb_off_ctrl->val; + + isc_update_awb_ctrls(isc); + + mutex_lock(&isc->awb_mutex); + if (vb2_is_streaming(&isc->vb2_vidq)) { + /* + * If we are streaming, we can update profile to + * have the new settings in place. + */ + isc_update_profile(isc); + } else { + /* + * The auto cluster will activate automatically this + * control. This has to be deactivated when not + * streaming. + */ + v4l2_ctrl_activate(isc->do_wb_ctrl, false); + } + mutex_unlock(&isc->awb_mutex); + + /* if we have autowhitebalance on, start histogram procedure */ + if (ctrls->awb == ISC_WB_AUTO && + vb2_is_streaming(&isc->vb2_vidq) && + ISC_IS_FORMAT_RAW(isc->config.sd_format->mbus_code)) + isc_set_histogram(isc, true); + + /* + * for one time whitebalance adjustment, check the button, + * if it's pressed, perform the one time operation. + */ + if (ctrls->awb == ISC_WB_NONE && + ctrl->cluster[ISC_CTRL_DO_WB]->is_new && + !(ctrl->cluster[ISC_CTRL_DO_WB]->flags & + V4L2_CTRL_FLAG_INACTIVE)) { + ctrls->awb = ISC_WB_ONETIME; + isc_set_histogram(isc, true); + v4l2_dbg(1, debug, &isc->v4l2_dev, + "One time white-balance started.\n"); + } + return 0; + } + return 0; +} + +static int isc_g_volatile_awb_ctrl(struct v4l2_ctrl *ctrl) +{ + struct isc_device *isc = container_of(ctrl->handler, + struct isc_device, ctrls.handler); + struct isc_ctrls *ctrls = &isc->ctrls; + + switch (ctrl->id) { + /* being a cluster, this id will be called for every control */ + case V4L2_CID_AUTO_WHITE_BALANCE: + ctrl->cluster[ISC_CTRL_R_GAIN]->val = + ctrls->gain[ISC_HIS_CFG_MODE_R]; + ctrl->cluster[ISC_CTRL_B_GAIN]->val = + ctrls->gain[ISC_HIS_CFG_MODE_B]; + ctrl->cluster[ISC_CTRL_GR_GAIN]->val = + ctrls->gain[ISC_HIS_CFG_MODE_GR]; + ctrl->cluster[ISC_CTRL_GB_GAIN]->val = + ctrls->gain[ISC_HIS_CFG_MODE_GB]; + + ctrl->cluster[ISC_CTRL_R_OFF]->val = + ctrls->offset[ISC_HIS_CFG_MODE_R]; + ctrl->cluster[ISC_CTRL_B_OFF]->val = + ctrls->offset[ISC_HIS_CFG_MODE_B]; + ctrl->cluster[ISC_CTRL_GR_OFF]->val = + ctrls->offset[ISC_HIS_CFG_MODE_GR]; + ctrl->cluster[ISC_CTRL_GB_OFF]->val = + ctrls->offset[ISC_HIS_CFG_MODE_GB]; + break; + } + return 0; +} + +static const struct v4l2_ctrl_ops isc_awb_ops = { + .s_ctrl = isc_s_awb_ctrl, + .g_volatile_ctrl = isc_g_volatile_awb_ctrl, +}; + +#define ISC_CTRL_OFF(_name, _id, _name_str) \ + static const struct v4l2_ctrl_config _name = { \ + .ops = &isc_awb_ops, \ + .id = _id, \ + .name = _name_str, \ + .type = V4L2_CTRL_TYPE_INTEGER, \ + .flags = V4L2_CTRL_FLAG_SLIDER, \ + .min = -4095, \ + .max = 4095, \ + .step = 1, \ + .def = 0, \ + } + +ISC_CTRL_OFF(isc_r_off_ctrl, ISC_CID_R_OFFSET, "Red Component Offset"); +ISC_CTRL_OFF(isc_b_off_ctrl, ISC_CID_B_OFFSET, "Blue Component Offset"); +ISC_CTRL_OFF(isc_gr_off_ctrl, ISC_CID_GR_OFFSET, "Green Red Component Offset"); +ISC_CTRL_OFF(isc_gb_off_ctrl, ISC_CID_GB_OFFSET, "Green Blue Component Offset"); + +#define ISC_CTRL_GAIN(_name, _id, _name_str) \ + static const struct v4l2_ctrl_config _name = { \ + .ops = &isc_awb_ops, \ + .id = _id, \ + .name = _name_str, \ + .type = V4L2_CTRL_TYPE_INTEGER, \ + .flags = V4L2_CTRL_FLAG_SLIDER, \ + .min = 0, \ + .max = 8191, \ + .step = 1, \ + .def = 512, \ + } + +ISC_CTRL_GAIN(isc_r_gain_ctrl, ISC_CID_R_GAIN, "Red Component Gain"); +ISC_CTRL_GAIN(isc_b_gain_ctrl, ISC_CID_B_GAIN, "Blue Component Gain"); +ISC_CTRL_GAIN(isc_gr_gain_ctrl, ISC_CID_GR_GAIN, "Green Red Component Gain"); +ISC_CTRL_GAIN(isc_gb_gain_ctrl, ISC_CID_GB_GAIN, "Green Blue Component Gain"); + +static int isc_ctrl_init(struct isc_device *isc) +{ + const struct v4l2_ctrl_ops *ops = &isc_ctrl_ops; + struct isc_ctrls *ctrls = &isc->ctrls; + struct v4l2_ctrl_handler *hdl = &ctrls->handler; + int ret; + + ctrls->hist_stat = HIST_INIT; + isc_reset_awb_ctrls(isc); + + ret = v4l2_ctrl_handler_init(hdl, 13); + if (ret < 0) + return ret; + + /* Initialize product specific controls. For example, contrast */ + isc->config_ctrls(isc, ops); + + ctrls->brightness = 0; + + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -1024, 1023, 1, 0); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAMMA, 0, isc->gamma_max, 1, + isc->gamma_max); + isc->awb_ctrl = v4l2_ctrl_new_std(hdl, &isc_awb_ops, + V4L2_CID_AUTO_WHITE_BALANCE, + 0, 1, 1, 1); + + /* do_white_balance is a button, so min,max,step,default are ignored */ + isc->do_wb_ctrl = v4l2_ctrl_new_std(hdl, &isc_awb_ops, + V4L2_CID_DO_WHITE_BALANCE, + 0, 0, 0, 0); + + if (!isc->do_wb_ctrl) { + ret = hdl->error; + v4l2_ctrl_handler_free(hdl); + return ret; + } + + v4l2_ctrl_activate(isc->do_wb_ctrl, false); + + isc->r_gain_ctrl = v4l2_ctrl_new_custom(hdl, &isc_r_gain_ctrl, NULL); + isc->b_gain_ctrl = v4l2_ctrl_new_custom(hdl, &isc_b_gain_ctrl, NULL); + isc->gr_gain_ctrl = v4l2_ctrl_new_custom(hdl, &isc_gr_gain_ctrl, NULL); + isc->gb_gain_ctrl = v4l2_ctrl_new_custom(hdl, &isc_gb_gain_ctrl, NULL); + isc->r_off_ctrl = v4l2_ctrl_new_custom(hdl, &isc_r_off_ctrl, NULL); + isc->b_off_ctrl = v4l2_ctrl_new_custom(hdl, &isc_b_off_ctrl, NULL); + isc->gr_off_ctrl = v4l2_ctrl_new_custom(hdl, &isc_gr_off_ctrl, NULL); + isc->gb_off_ctrl = v4l2_ctrl_new_custom(hdl, &isc_gb_off_ctrl, NULL); + + /* + * The cluster is in auto mode with autowhitebalance enabled + * and manual mode otherwise. + */ + v4l2_ctrl_auto_cluster(10, &isc->awb_ctrl, 0, true); + + v4l2_ctrl_handler_setup(hdl); + + return 0; +} + +static int isc_async_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct isc_device *isc = container_of(notifier->v4l2_dev, + struct isc_device, v4l2_dev); + struct isc_subdev_entity *subdev_entity = + container_of(notifier, struct isc_subdev_entity, notifier); + + if (video_is_registered(&isc->video_dev)) { + v4l2_err(&isc->v4l2_dev, "only supports one sub-device.\n"); + return -EBUSY; + } + + subdev_entity->sd = subdev; + + return 0; +} + +static void isc_async_unbind(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct isc_device *isc = container_of(notifier->v4l2_dev, + struct isc_device, v4l2_dev); + mutex_destroy(&isc->awb_mutex); + cancel_work_sync(&isc->awb_work); + video_unregister_device(&isc->video_dev); + v4l2_ctrl_handler_free(&isc->ctrls.handler); +} + +static struct isc_format *find_format_by_code(struct isc_device *isc, + unsigned int code, int *index) +{ + struct isc_format *fmt = &isc->formats_list[0]; + unsigned int i; + + for (i = 0; i < isc->formats_list_size; i++) { + if (fmt->mbus_code == code) { + *index = i; + return fmt; + } + + fmt++; + } + + return NULL; +} + +static int isc_formats_init(struct isc_device *isc) +{ + struct isc_format *fmt; + struct v4l2_subdev *subdev = isc->current_subdev->sd; + unsigned int num_fmts, i, j; + u32 list_size = isc->formats_list_size; + struct v4l2_subdev_mbus_code_enum mbus_code = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + + num_fmts = 0; + while (!v4l2_subdev_call(subdev, pad, enum_mbus_code, + NULL, &mbus_code)) { + mbus_code.index++; + + fmt = find_format_by_code(isc, mbus_code.code, &i); + if (!fmt) { + v4l2_warn(&isc->v4l2_dev, "Mbus code %x not supported\n", + mbus_code.code); + continue; + } + + fmt->sd_support = true; + num_fmts++; + } + + if (!num_fmts) + return -ENXIO; + + isc->num_user_formats = num_fmts; + isc->user_formats = devm_kcalloc(isc->dev, + num_fmts, sizeof(*isc->user_formats), + GFP_KERNEL); + if (!isc->user_formats) + return -ENOMEM; + + fmt = &isc->formats_list[0]; + for (i = 0, j = 0; i < list_size; i++) { + if (fmt->sd_support) + isc->user_formats[j++] = fmt; + fmt++; + } + + return 0; +} + +static int isc_set_default_fmt(struct isc_device *isc) +{ + struct v4l2_format f = { + .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, + .fmt.pix = { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .field = V4L2_FIELD_NONE, + .pixelformat = isc->user_formats[0]->fourcc, + }, + }; + int ret; + + ret = isc_try_fmt(isc, &f, NULL); + if (ret) + return ret; + + isc->fmt = f; + return 0; +} + +static int isc_async_complete(struct v4l2_async_notifier *notifier) +{ + struct isc_device *isc = container_of(notifier->v4l2_dev, + struct isc_device, v4l2_dev); + struct video_device *vdev = &isc->video_dev; + struct vb2_queue *q = &isc->vb2_vidq; + int ret = 0; + + INIT_WORK(&isc->awb_work, isc_awb_work); + + ret = v4l2_device_register_subdev_nodes(&isc->v4l2_dev); + if (ret < 0) { + v4l2_err(&isc->v4l2_dev, "Failed to register subdev nodes\n"); + return ret; + } + + isc->current_subdev = container_of(notifier, + struct isc_subdev_entity, notifier); + mutex_init(&isc->lock); + mutex_init(&isc->awb_mutex); + + init_completion(&isc->comp); + + /* Initialize videobuf2 queue */ + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ; + q->drv_priv = isc; + q->buf_struct_size = sizeof(struct isc_buffer); + q->ops = &isc_vb2_ops; + q->mem_ops = &vb2_dma_contig_memops; + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + q->lock = &isc->lock; + q->min_buffers_needed = 1; + q->dev = isc->dev; + + ret = vb2_queue_init(q); + if (ret < 0) { + v4l2_err(&isc->v4l2_dev, + "vb2_queue_init() failed: %d\n", ret); + goto isc_async_complete_err; + } + + /* Init video dma queues */ + INIT_LIST_HEAD(&isc->dma_queue); + spin_lock_init(&isc->dma_queue_lock); + spin_lock_init(&isc->awb_lock); + + ret = isc_formats_init(isc); + if (ret < 0) { + v4l2_err(&isc->v4l2_dev, + "Init format failed: %d\n", ret); + goto isc_async_complete_err; + } + + ret = isc_set_default_fmt(isc); + if (ret) { + v4l2_err(&isc->v4l2_dev, "Could not set default format\n"); + goto isc_async_complete_err; + } + + ret = isc_ctrl_init(isc); + if (ret) { + v4l2_err(&isc->v4l2_dev, "Init isc ctrols failed: %d\n", ret); + goto isc_async_complete_err; + } + + /* Register video device */ + strscpy(vdev->name, KBUILD_MODNAME, sizeof(vdev->name)); + vdev->release = video_device_release_empty; + vdev->fops = &isc_fops; + vdev->ioctl_ops = &isc_ioctl_ops; + vdev->v4l2_dev = &isc->v4l2_dev; + vdev->vfl_dir = VFL_DIR_RX; + vdev->queue = q; + vdev->lock = &isc->lock; + vdev->ctrl_handler = &isc->ctrls.handler; + vdev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE; + video_set_drvdata(vdev, isc); + + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); + if (ret < 0) { + v4l2_err(&isc->v4l2_dev, + "video_register_device failed: %d\n", ret); + goto isc_async_complete_err; + } + + return 0; + +isc_async_complete_err: + mutex_destroy(&isc->awb_mutex); + mutex_destroy(&isc->lock); + return ret; +} + +const struct v4l2_async_notifier_operations atmel_isc_async_ops = { + .bound = isc_async_bound, + .unbind = isc_async_unbind, + .complete = isc_async_complete, +}; +EXPORT_SYMBOL_GPL(atmel_isc_async_ops); + +void atmel_isc_subdev_cleanup(struct isc_device *isc) +{ + struct isc_subdev_entity *subdev_entity; + + list_for_each_entry(subdev_entity, &isc->subdev_entities, list) { + v4l2_async_nf_unregister(&subdev_entity->notifier); + v4l2_async_nf_cleanup(&subdev_entity->notifier); + } + + INIT_LIST_HEAD(&isc->subdev_entities); +} +EXPORT_SYMBOL_GPL(atmel_isc_subdev_cleanup); + +int atmel_isc_pipeline_init(struct isc_device *isc) +{ + struct device *dev = isc->dev; + struct regmap *regmap = isc->regmap; + struct regmap_field *regs; + unsigned int i; + + /* + * DPCEN-->GDCEN-->BLCEN-->WB-->CFA-->CC--> + * GAM-->VHXS-->CSC-->CBC-->SUB422-->SUB420 + */ + const struct reg_field regfields[ISC_PIPE_LINE_NODE_NUM] = { + REG_FIELD(ISC_DPC_CTRL, 0, 0), + REG_FIELD(ISC_DPC_CTRL, 1, 1), + REG_FIELD(ISC_DPC_CTRL, 2, 2), + REG_FIELD(ISC_WB_CTRL, 0, 0), + REG_FIELD(ISC_CFA_CTRL, 0, 0), + REG_FIELD(ISC_CC_CTRL, 0, 0), + REG_FIELD(ISC_GAM_CTRL, 0, 0), + REG_FIELD(ISC_GAM_CTRL, 1, 1), + REG_FIELD(ISC_GAM_CTRL, 2, 2), + REG_FIELD(ISC_GAM_CTRL, 3, 3), + REG_FIELD(ISC_VHXS_CTRL, 0, 0), + REG_FIELD(ISC_CSC_CTRL + isc->offsets.csc, 0, 0), + REG_FIELD(ISC_CBC_CTRL + isc->offsets.cbc, 0, 0), + REG_FIELD(ISC_SUB422_CTRL + isc->offsets.sub422, 0, 0), + REG_FIELD(ISC_SUB420_CTRL + isc->offsets.sub420, 0, 0), + }; + + for (i = 0; i < ISC_PIPE_LINE_NODE_NUM; i++) { + regs = devm_regmap_field_alloc(dev, regmap, regfields[i]); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + isc->pipeline[i] = regs; + } + + return 0; +} +EXPORT_SYMBOL_GPL(atmel_isc_pipeline_init); + +/* regmap configuration */ +#define ATMEL_ISC_REG_MAX 0xd5c +const struct regmap_config atmel_isc_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = ATMEL_ISC_REG_MAX, +}; +EXPORT_SYMBOL_GPL(atmel_isc_regmap_config); + +MODULE_AUTHOR("Songjun Wu"); +MODULE_AUTHOR("Eugen Hristev"); +MODULE_DESCRIPTION("Atmel ISC common code base"); +MODULE_LICENSE("GPL v2"); |