1 files changed, 0 insertions, 48 deletions
diff --git a/drivers/staging/mt7621-eth/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt b/drivers/staging/mt7621-eth/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt
deleted file mode 100644
index 596b38552697..000000000000
--- a/drivers/staging/mt7621-eth/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Mediatek Gigabit Switch
-=======================
-
-The mediatek gigabit switch can be found on Mediatek SoCs.
-
-Required properties:
-- compatible: Should be "mediatek,mt7620-gsw", "mediatek,mt7621-gsw",
-  "mediatek,mt7623-gsw"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the gigabit switches interrupt
-
-
-Additional required properties for ARM based SoCs:
-- mediatek,reset-pin: phandle describing the reset GPIO
-- clocks: the clocks used by the switch
-- clock-names: the names of the clocks listed in the clocks property
-  these should be "trgpll", "esw", "gp2", "gp1"
-- mt7530-supply: the phandle of the regulator used to power the switch
-- mediatek,pctl-regmap: phandle to the port control regmap. this is used to
-  setup the drive current
-
-
-Optional properties:
-- interrupt-parent: Should be the phandle for the interrupt controller
-  that services interrupts for this device
-
-Example:
-
-gsw: switch@1b100000 {
-	compatible = "mediatek,mt7623-gsw";
-	reg = <0 0x1b110000 0 0x300000>;
-
-	interrupt-parent = <&pio>;
-	interrupts = <168 IRQ_TYPE_EDGE_RISING>;
-
-	clocks = <&apmixedsys CLK_APMIXED_TRGPLL>,
-		 <&ethsys CLK_ETHSYS_ESW>,
-		 <&ethsys CLK_ETHSYS_GP2>,
-		 <&ethsys CLK_ETHSYS_GP1>;
-	clock-names = "trgpll", "esw", "gp2", "gp1";
-
-	mt7530-supply = <&mt6323_vpa_reg>;
-
-	mediatek,pctl-regmap = <&syscfg_pctl_a>;
-	mediatek,reset-pin = <&pio 15 0>;
-
-	status = "okay";
-};