diff options
Diffstat (limited to 'drivers/staging/silicom/bypasslib/libbp_sd.h')
-rw-r--r-- | drivers/staging/silicom/bypasslib/libbp_sd.h | 532 |
1 files changed, 0 insertions, 532 deletions
diff --git a/drivers/staging/silicom/bypasslib/libbp_sd.h b/drivers/staging/silicom/bypasslib/libbp_sd.h deleted file mode 100644 index cac4b0b2ed78..000000000000 --- a/drivers/staging/silicom/bypasslib/libbp_sd.h +++ /dev/null @@ -1,532 +0,0 @@ -/******************************************************************************/ -/* */ -/* bypass library, Copyright (c) 2004 Silicom, Ltd */ -/* Corporation. */ -/* */ -/* This program is free software; you can redistribute it and/or modify */ -/* it under the terms of the GNU General Public License as published by */ -/* the Free Software Foundation, located in the file LICENSE. */ -/* */ -/* Ver 1.0.0 */ -/* */ -/* libbypass.h */ -/* */ -/******************************************************************************/ - -/** - * is_bypass - check if device is a Bypass controlling device - * @if_index: network device index - * - * Output: - * 1 - if device is bypass controlling device, - * 0 - if device is bypass slave device - * -1 - device not support Bypass - **/ -int is_bypass_sd(int if_index); - -/** - * get_bypass_slave - get second port participate in the Bypass pair - * @if_index: network device index - * - * Output: - * network device index of the slave device - * -1 - on failure (device not support Bypass or it's a slave device) - **/ -int get_bypass_slave_sd(int if_index); - -/** - * get_bypass_caps - get second port participate in the Bypass pair - * @if_index: network device index - * - * Output: - * flags word on success;flag word is a 32-bit mask word with each bit defines - * different capability as described bellow. - * Value of 1 for supporting this feature. 0 for not supporting this feature. - * -1 - on failure (if the device is not capable of the operation or not a - * Bypass device) - * Bit feature description - * - * 0 BP_CAP The interface is Bypass capable in general - * - * 1 BP_STATUS_CAP The interface can report of the current Bypass - * mode - * - * 2 BP_STATUS_CHANGE_CAP The interface can report on a change to bypass - * mode from the last time the mode was defined - * - * 3 SW_CTL_CAP The interface is Software controlled capable for - * bypass/non bypass modes. - * - * 4 BP_DIS_CAP The interface is capable of disabling the Bypass - * mode at all times. This mode will retain its - * mode even during power loss and also after power - * recovery. This will overcome on any bypass - * operation due to watchdog timeout or set bypass - * command. - * - * 5 BP_DIS_STATUS_CAP The interface can report of the current - * DIS_BP_CAP - * - * 6 STD_NIC_CAP The interface is capable to be configured to - * operate as standard, non Bypass, NIC interface - * (have direct connection to interfaces at all - * power modes) - * - * 7 BP_PWOFF_NO_CAP The interface can be in Bypass mode at power off - * state - * - * 8 BP_PWOFF_OFF_CAP The interface can disconnect the Bypass mode at - * power off state without effecting all the other - * states of operation - * - * 9 BP_PWOFF_CTL_CAP The behavior of the Bypass mode at Power-off - * state can be controlled by software without - * effecting any other state - * - *10 BP_PWUP_ON_CAP The interface can be in Bypass mode when power - * is turned on (until the system take control of - * the bypass functionality) - * - *11 BP_PWUP_OFF_CAP The interface can disconnect from Bypass mode - * when power is turned on (until the system take - * control of the bypass functionality) - * - *12 BP_PWUP_CTL_CAP The behavior of the Bypass mode at Power-up can - * be controlled by software - * - *13 WD_CTL_CAP The interface has watchdog capabilities to turn - * to Bypass mode when not reset for defined period - * of time. - * - *14 WD_STATUS_CAP The interface can report on the watchdog status - * (Active/inactive) - * - *15 WD_TIMEOUT_CAP The interface can report the time left till - * watchdog triggers to Bypass mode. - * - *16-31 RESERVED - * - * **/ -int get_bypass_caps_sd(int if_index); - -/** - * get_wd_set_caps - Obtain watchdog timer setting capabilities - * @if_index: network device index - * - * Output: - * - * Set of numbers defining the various parameters of the watchdog capable - * to be set to as described bellow. - * -1 - on failure (device not support Bypass or it's a slave device) - * - * Bit feature description - * - * 0-3 WD_MIN_TIME The interface WD minimal time period in 100mS units - * - * 4 WD_STEP_TIME The steps of the WD timer in - * 0 - for linear steps (WD_MIN_TIME * X) - * 1 - for multiply by 2 from previous step - * (WD_MIN_TIME * 2^X) - * - * 5-8 WD_STEP_COUNT Number of steps the WD timer supports in 2^X - * (X bit available for defining the value) - * - * - * - **/ -int get_wd_set_caps_sd(int if_index); - -/** - * set_bypass - set Bypass state - * @if_index: network device index of the controlling device - * @bypass_mode: bypass mode (1=on, 0=off) - * Output: - * 0 - on success - * -1 - on failure (device not support Bypass or it's a slave device) - **/ -int set_bypass_sd(int if_index, int bypass_mode); - -/** - * get_bypass - Get Bypass mode state - * @if_index: network device index of the controlling device - * Output: - * 0/1 - (off/on) on success - * -1 - on failure (device not support Bypass or it's a slave device) - **/ -int get_bypass_sd(int if_index); - -/** - * get_bypass_change - Get change of Bypass mode state from last status check - * @if_index: network device index of the controlling device - * Output: - * 0/1 - (off/on) on success - * -1 - on failure (device not support Bypass or it's a slave device) - **/ -int get_bypass_change_sd(int if_index); - -/** - * set_dis_bypass - Set Disable Bypass mode - * @if_index: network device index of the controlling device - * @dis_bypass: disable bypass(1=dis, 0=en) - * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation or device not support - * Bypass or it's a slave device) - **/ -int set_dis_bypass_sd(int if_index, int dis_bypass); - -/** - * get_dis_bypass - Get Disable Bypass mode state - * @if_index: network device index of the controlling device - * Output: - * 0/1 - on success (normal Bypass mode/ Disable bypass) - * -1 - on failure (device is not capable of the operation or device not support - * Bypass or it's a slave device) - **/ -int get_dis_bypass_sd(int if_index); - -/** - * set_bypass_pwoff - Set Bypass mode at power-off state - * @if_index: network device index of the controlling device - * @bypass_mode: bypass mode setting at power off state (1=BP en, 0=BP Dis) - * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation or device not support - * Bypass or it's a slave device) - **/ -int set_bypass_pwoff_sd(int if_index, int bypass_mode); - -/** - * get_bypass_pwoff - Get Bypass mode state at power-off state - * @if_index: network device index of the controlling device - * Output: - * 0/1 - on success (Disable bypass at power off state / normal Bypass mode) - * -1 - on failure (device is not capable of the operation or device not support - * Bypass or it's a slave device) - **/ -int get_bypass_pwoff_sd(int if_index); - -/** - * set_bypass_pwup - Set Bypass mode at power-up state - * @if_index: network device index of the controlling device - * @bypass_mode: bypass mode setting at power up state (1=BP en, 0=BP Dis) - * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation or device not support - * Bypass or it's a slave device) - **/ -int set_bypass_pwup_sd(int if_index, int bypass_mode); - -/** - * get_bypass_pwup - Get Bypass mode state at power-up state - * @if_index: network device index of the controlling device - * Output: - * 0/1 - on success (Disable bypass at power up state / normal Bypass mode) - * -1 - on failure (device is not capable of the operation or device not support - * Bypass or it's a slave device) - **/ -int get_bypass_pwup_sd(int if_index); - -/** - * set_bypass_wd - Set watchdog state - * @if_index: network device index of the controlling device - * @ms_timeout: requested timeout (in ms units), 0 for disabling the watchdog - * timer - * @ms_timeout_set(output): requested timeout (in ms units), that the adapter - * supports and will be used by the watchdog - * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation or device not support - * Bypass or it's a slave device) - **/ -int set_bypass_wd_sd(int if_index, int ms_timeout, int *ms_timeout_set); - -/** - * get_bypass_wd - Get watchdog state - * @if_index: network device index of the controlling device - * @ms_timeout (output): WDT timeout (in ms units), - * -1 for unknown wdt status - * 0 if WDT is disabled - * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation or device not support - * Bypass or it's a slave device) - **/ -int get_bypass_wd_sd(int if_index, int *ms_timeout_set); - -/** - * get_wd_expire_time - Get watchdog expire - * @if_index: network device index of the controlling device - * @ms_time_left (output): time left till watchdog time expire, - * -1 if WDT has expired - * 0 if WDT is disabled - * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation or device not support - * Bypass or it's a slave device or unknown wdt status) - **/ -int get_wd_expire_time_sd(int if_index, int *ms_time_left); - -/** - * reset_bypass_wd_timer - Reset watchdog timer - * @if_index: network device index of the controlling device - * - * Output: - * 1 - on success - * 0 - watchdog is not configured - * -1 - on failure (device is not capable of the operation or device not support - * Bypass or it's a slave device or unknown wdt status) - **/ -int reset_bypass_wd_timer_sd(int if_index); - -/** - * set_std_nic - Standard NIC mode of operation - * @if_index: network device index of the controlling device - * @nic_mode: 0/1 (Default Bypass mode / Standard NIC mode) - * - * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation or device not support - * Bypass or it's a slave device) - **/ -int set_std_nic_sd(int if_index, int nic_mode); - -/** - * get_std_nic - Get Standard NIC mode setting - * @if_index: network device index of the controlling device - * - * Output: - * 0/1 (Default Bypass mode / Standard NIC mode) on success - * -1 - on failure (device is not capable of the operation or device not support - * Bypass or it's a slave device) - **/ -int get_std_nic_sd(int if_index); - -/** - * set_tx - set transmitter enable/disable - * @if_index: network device index of the controlling device - * @tx_state: 0/1 (Transmit Disable / Transmit Enable) - * - * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation ) - **/ -int set_tx_sd(int if_index, int tx_state); - -/** - * get_std_nic - get transmitter state (disable / enable) - * @if_index: network device index of the controlling device - * - * Output: - * 0/1 (ransmit Disable / Transmit Enable) on success - * -1 - on failure (device is not capable of the operation or device not support - * Bypass) - **/ -int get_tx_sd(int if_index); - -/** - * set_tap - set TAP state - * @if_index: network device index of the controlling device - * @tap_mode: 1 tap mode , 0 normal nic mode - * Output: - * 0 - on success - * -1 - on failure (device not support TAP or it's a slave device) - **/ -int set_tap_sd(int if_index, int tap_mode); - -/** - * get_tap - Get TAP mode state - * @if_index: network device index of the controlling device - * Output: - * 0/1 - (off/on) on success - * -1 - on failure (device not support TAP or it's a slave device) - **/ -int get_tap_sd(int if_index); - -/** - * get_tap_change - Get change of TAP mode state from last status check - * @if_index: network device index of the controlling device - * Output: - * 0/1 - (off/on) on success - * -1 - on failure (device not support TAP or it's a slave device) - **/ -int get_tap_change_sd(int if_index); - -/** - * set_dis_tap - Set Disable TAP mode - * @if_index: network device index of the controlling device - * @dis_tap: disable tap(1=dis, 0=en) - * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation or device not support - * TAP or it's a slave device) - **/ -int set_dis_tap_sd(int if_index, int dis_tap); - -/** - * get_dis_tap - Get Disable TAP mode state - * @if_index: network device index of the controlling device - * Output: - * 0/1 - on success (normal TAP mode/ Disable TAP) - * -1 - on failure (device is not capable of the operation or device not support - * TAP or it's a slave device) - **/ -int get_dis_tap_sd(int if_index); - -/** - * set_tap_pwup - Set TAP mode at power-up state - * @if_index: network device index of the controlling device - * @bypass_mode: tap mode setting at power up state (1=TAP en, 0=TAP Dis) - * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation or device not - * support TAP or it's a slave device) - **/ -int set_tap_pwup_sd(int if_index, int tap_mode); - -/** - * get_tap_pwup - Get TAP mode state at power-up state - * @if_index: network device index of the controlling device - * Output: - * 0/1 - on success (Disable TAP at power up state / normal TAP mode) - * -1 - on failure (device is not capable of the operation or device not - * support TAP or it's a slave device) - **/ -int get_tap_pwup_sd(int if_index); - -/** - * set_bp_disc - set Disconnect state - * @if_index: network device index of the controlling device - * @tap_mode: 1 disc mode , 0 non-disc mode - * Output: - * 0 - on success - * -1 - on failure (device not support Disconnect or it's a slave device) - **/ -int set_bp_disc_sd(int if_index, int disc_mode); - -/** - * get_bp_disc - Get Disconnect mode state - * @if_index: network device index of the controlling device - * Output: - * 0/1 - (off/on) on success - * -1 - on failure (device not support Disconnect or it's a slave device) - **/ -int get_bp_disc_sd(int if_index); - -/** - * get_bp_disc_change - Get change of Disconnect mode state from last status check - * @if_index: network device index of the controlling device - * Output: - * 0/1 - (off/on) on success - * -1 - on failure (device not support Disconnect or it's a slave device) - **/ -int get_bp_disc_change_sd(int if_index); - -/** - * set_bp_dis_disc - Set Disable Disconnect mode - * @if_index: network device index of the controlling device - * @dis_tap: disable tap(1=dis, 0=en) - * Output: - * 0 - on success - * -1 - on failure (device is not capable ofthe operation or device not - * support Disconnect or it's a slave device) - **/ -int set_bp_dis_disc_sd(int if_index, int dis_disc); - -/** - * get_dis_tap - Get Disable Disconnect mode state - * @if_index: network device index of the controlling device - * Output: - * 0/1 - on success (normal Disconnect mode/ Disable Disconnect) - * -1 - on failure (device is not capable of the operation or device not - * support Disconnect or it's a slave device) - **/ -int get_bp_dis_disc_sd(int if_index); - -/** - * set_bp_disc_pwup - Set Disconnect mode at power-up state - * @if_index: network device index of the controlling device - * @disc_mode: tap mode setting at power up state (1=Disc en, 0=Disc Dis) - * Output: - * 0 - on success - * -1 - on failure (device is not capable of the operation or device not - * support Disconnect or it's a slave device) - **/ -int set_bp_disc_pwup_sd(int if_index, int disc_mode); - -/** - * get_bp_disc_pwup - Get Disconnect mode state at power-up state - * @if_index: network device index of the controlling device - * Output: - * 0/1 - on success (Disable Disconnect at power up state / normal Disconnect - * mode) - * -1 - on failure (device is not capable of the operation or device not - * support TAP or it's a slave device) - **/ -int get_bp_disc_pwup_sd(int if_index); - -/** - * set_wd_exp_mode - Set adapter state when WDT expired. - * @if_index: network device index of the controlling device - * @bypass_mode: adapter mode (1=tap mode, 0=bypass mode) - * Output: - * 0 - on success - * -1 - on failure (device not support Bypass or it's a slave device) - **/ -int set_wd_exp_mode_sd(int if_index, int bypass_mode); - -/** - * get_wd_exp_mode - Get adapter state when WDT expired. - * @if_index: network device index of the controlling device - * Output: - * 0/1 - (bypass/tap) on success - * -1 - on failure (device not support Bypass or it's a slave device) - **/ -int get_wd_exp_mode_sd(int if_index); - -/** - * set_wd_autoreset - reset WDT periodically. - * @if_index: network device index of the controlling device - * @bypass_mode: adapter mode (1=tap mode, 0=bypass mode) - * Output: - * 1 - on success - * -1 - on failure (device is not capable of the operation or device not - * support Bypass or it's a slave device or unknown wdt - * status) - **/ -int set_wd_autoreset_sd(int if_index, int time); - -/** - * set_wd_autoreset - reset WDT periodically. - * @if_index: network device index of the controlling device - * @bypass_mode: adapter mode (1=tap mode, 0=bypass mode) - * Output: - * 1 - on success - * -1 - on failure (device is not capable of the operation or device not - * support Bypass or it's a slave device or unknown wdt - * status) - **/ -int get_wd_autoreset_sd(int if_index); - -/** - * set_tpl - set TPL state - * @if_index: network device index of the controlling device - * @tpl_mode: 1 tpl mode , 0 normal nic mode - * Output: - * 0 - on success - * -1 - on failure (device not support TPL) - **/ -int set_tpl_sd(int if_index, int tpl_mode); - -/** - * get_tpl - Get TPL mode state - * @if_index: network device index of the controlling device - * Output: - * 0/1 - (off/on) on success - * -1 - on failure (device not support TPL or it's a slave device) - **/ -int get_tpl_sd(int if_index); - -int get_bypass_info_sd(int if_index, struct bp_info *bp_info); -int bp_if_scan_sd(void); -/*int get_dev_num_sd(void);*/ |