diff options
Diffstat (limited to 'drivers/staging/winbond/wbusb.c')
-rw-r--r-- | drivers/staging/winbond/wbusb.c | 853 |
1 files changed, 0 insertions, 853 deletions
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c deleted file mode 100644 index 0d29624416c3..000000000000 --- a/drivers/staging/winbond/wbusb.c +++ /dev/null @@ -1,853 +0,0 @@ -/* - * Copyright 2008 Pavel Machek <pavel@ucw.cz> - * - * Distribute under GPLv2. - * - * The original driver was written by: - * Jeff Lee <YY_Lee@issc.com.tw> - * - * and was adapted to the 2.6 kernel by: - * Costantino Leandro (Rxart Desktop) <le_costantino@pixartargentina.com.ar> - */ -#include <net/mac80211.h> -#include <linux/usb.h> -#include <linux/module.h> - -#include "core.h" -#include "mds_f.h" -#include "mto.h" -#include "wbhal.h" -#include "wb35reg_f.h" -#include "wb35tx_f.h" -#include "wb35rx_f.h" - -MODULE_DESCRIPTION("IS89C35 802.11bg WLAN USB Driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION("0.1"); - -static const struct usb_device_id wb35_table[] = { - { USB_DEVICE(0x0416, 0x0035) }, - { USB_DEVICE(0x18E8, 0x6201) }, - { USB_DEVICE(0x18E8, 0x6206) }, - { USB_DEVICE(0x18E8, 0x6217) }, - { USB_DEVICE(0x18E8, 0x6230) }, - { USB_DEVICE(0x18E8, 0x6233) }, - { USB_DEVICE(0x1131, 0x2035) }, - { 0, } -}; - -MODULE_DEVICE_TABLE(usb, wb35_table); - -static struct ieee80211_rate wbsoft_rates[] = { - { .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, -}; - -static struct ieee80211_channel wbsoft_channels[] = { - { .center_freq = 2412 }, -}; - -static struct ieee80211_supported_band wbsoft_band_2GHz = { - .channels = wbsoft_channels, - .n_channels = ARRAY_SIZE(wbsoft_channels), - .bitrates = wbsoft_rates, - .n_bitrates = ARRAY_SIZE(wbsoft_rates), -}; - -static void hal_set_beacon_period(struct hw_data *pHwData, u16 beacon_period) -{ - u32 tmp; - - if (pHwData->SurpriseRemove) - return; - - pHwData->BeaconPeriod = beacon_period; - tmp = pHwData->BeaconPeriod << 16; - tmp |= pHwData->ProbeDelay; - Wb35Reg_Write(pHwData, 0x0848, tmp); -} - -static int wbsoft_add_interface(struct ieee80211_hw *dev, - struct ieee80211_vif *vif) -{ - struct wbsoft_priv *priv = dev->priv; - - hal_set_beacon_period(&priv->sHwData, vif->bss_conf.beacon_int); - - return 0; -} - -static void wbsoft_remove_interface(struct ieee80211_hw *dev, - struct ieee80211_vif *vif) -{ -} - -static void wbsoft_stop(struct ieee80211_hw *hw) -{ -} - -static int wbsoft_get_stats(struct ieee80211_hw *hw, - struct ieee80211_low_level_stats *stats) -{ - return 0; -} - -static u64 wbsoft_prepare_multicast(struct ieee80211_hw *hw, - struct netdev_hw_addr_list *mc_list) -{ - return netdev_hw_addr_list_count(mc_list); -} - -static void wbsoft_configure_filter(struct ieee80211_hw *dev, - unsigned int changed_flags, - unsigned int *total_flags, - u64 multicast) -{ - unsigned int new_flags; - - new_flags = 0; - - if (*total_flags & FIF_PROMISC_IN_BSS) - new_flags |= FIF_PROMISC_IN_BSS; - else if ((*total_flags & FIF_ALLMULTI) || (multicast > 32)) - new_flags |= FIF_ALLMULTI; - - dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS; - - *total_flags = new_flags; -} - -static void wbsoft_tx(struct ieee80211_hw *dev, - struct ieee80211_tx_control *control, - struct sk_buff *skb) -{ - struct wbsoft_priv *priv = dev->priv; - - if (priv->sMlmeFrame.is_in_used != PACKET_FREE_TO_USE) { - priv->sMlmeFrame.wNumTxMMPDUDiscarded++; - kfree_skb(skb); - return; - } - - priv->sMlmeFrame.is_in_used = PACKET_COME_FROM_MLME; - - priv->sMlmeFrame.pMMPDU = skb->data; - priv->sMlmeFrame.data_type = FRAME_TYPE_802_11_MANAGEMENT; - priv->sMlmeFrame.len = skb->len; - priv->sMlmeFrame.wNumTxMMPDU++; - - /* - * H/W will enter power save by set the register. S/W don't send null - * frame with PWRMgt bit enbled to enter power save now. - */ - - Mds_Tx(priv); -} - -static int wbsoft_start(struct ieee80211_hw *dev) -{ - struct wbsoft_priv *priv = dev->priv; - - priv->enabled = true; - - return 0; -} - -static void hal_set_radio_mode(struct hw_data *pHwData, unsigned char radio_off) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (pHwData->SurpriseRemove) - return; - - if (radio_off) { /* disable Baseband receive off */ - pHwData->CurrentRadioSw = 1; /* off */ - reg->M24_MacControl &= 0xffffffbf; - } else { - pHwData->CurrentRadioSw = 0; /* on */ - reg->M24_MacControl |= 0x00000040; - } - Wb35Reg_Write(pHwData, 0x0824, reg->M24_MacControl); -} - -static void hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info channel) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (pHwData->SurpriseRemove) - return; - - RFSynthesizer_SwitchingChannel(pHwData, channel); /* Switch channel */ - pHwData->Channel = channel.ChanNo; - pHwData->band = channel.band; - reg->M28_MacControl &= ~0xff; /* Clean channel information field */ - reg->M28_MacControl |= channel.ChanNo; - Wb35Reg_WriteWithCallbackValue(pHwData, 0x0828, reg->M28_MacControl, - (s8 *) &channel, - sizeof(struct chan_info)); -} - -static void hal_set_current_channel(struct hw_data *pHwData, struct chan_info channel) -{ - hal_set_current_channel_ex(pHwData, channel); -} - -static void hal_set_accept_broadcast(struct hw_data *pHwData, u8 enable) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (pHwData->SurpriseRemove) - return; - - reg->M00_MacControl &= ~0x02000000; /* The HW value */ - - if (enable) - reg->M00_MacControl |= 0x02000000; /* The HW value */ - - Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl); -} - -/* For wep key error detection, we need to accept broadcast packets to be received temporary. */ -static void hal_set_accept_promiscuous(struct hw_data *pHwData, u8 enable) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (pHwData->SurpriseRemove) - return; - - if (enable) { - reg->M00_MacControl |= 0x00400000; - Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl); - } else { - reg->M00_MacControl &= ~0x00400000; - Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl); - } -} - -static void hal_set_accept_multicast(struct hw_data *pHwData, u8 enable) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (pHwData->SurpriseRemove) - return; - - reg->M00_MacControl &= ~0x01000000; /* The HW value */ - if (enable) - reg->M00_MacControl |= 0x01000000; /* The HW value */ - Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl); -} - -static void hal_set_accept_beacon(struct hw_data *pHwData, u8 enable) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (pHwData->SurpriseRemove) - return; - - if (!enable) /* Due to SME and MLME are not suitable for 35 */ - return; - - reg->M00_MacControl &= ~0x04000000; /* The HW value */ - if (enable) - reg->M00_MacControl |= 0x04000000; /* The HW value */ - - Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl); -} - -static int wbsoft_config(struct ieee80211_hw *dev, u32 changed) -{ - struct wbsoft_priv *priv = dev->priv; - struct chan_info ch; - - /* Should use channel_num, or something, as that is already pre-translated */ - ch.band = 1; - ch.ChanNo = 1; - - hal_set_current_channel(&priv->sHwData, ch); - hal_set_accept_broadcast(&priv->sHwData, 1); - hal_set_accept_promiscuous(&priv->sHwData, 1); - hal_set_accept_multicast(&priv->sHwData, 1); - hal_set_accept_beacon(&priv->sHwData, 1); - hal_set_radio_mode(&priv->sHwData, 0); - - return 0; -} - -static u64 wbsoft_get_tsf(struct ieee80211_hw *dev, struct ieee80211_vif *vif) -{ - return 0; -} - -static const struct ieee80211_ops wbsoft_ops = { - .tx = wbsoft_tx, - .start = wbsoft_start, - .stop = wbsoft_stop, - .add_interface = wbsoft_add_interface, - .remove_interface = wbsoft_remove_interface, - .config = wbsoft_config, - .prepare_multicast = wbsoft_prepare_multicast, - .configure_filter = wbsoft_configure_filter, - .get_stats = wbsoft_get_stats, - .get_tsf = wbsoft_get_tsf, -}; - -static void hal_set_ethernet_address(struct hw_data *pHwData, u8 *current_address) -{ - u32 ltmp[2]; - - if (pHwData->SurpriseRemove) - return; - - memcpy(pHwData->CurrentMacAddress, current_address, ETH_ALEN); - - ltmp[0] = cpu_to_le32(*(u32 *) pHwData->CurrentMacAddress); - ltmp[1] = cpu_to_le32(*(u32 *) (pHwData->CurrentMacAddress + 4)) & 0xffff; - - Wb35Reg_BurstWrite(pHwData, 0x03e8, ltmp, 2, AUTO_INCREMENT); -} - -static void hal_get_permanent_address(struct hw_data *pHwData, u8 *pethernet_address) -{ - if (pHwData->SurpriseRemove) - return; - - memcpy(pethernet_address, pHwData->PermanentMacAddress, 6); -} - -static void hal_stop(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - - pHwData->Wb35Rx.rx_halt = 1; - Wb35Rx_stop(pHwData); - - pHwData->Wb35Tx.tx_halt = 1; - Wb35Tx_stop(pHwData); - - reg->D00_DmaControl &= ~0xc0000000; /* Tx Off, Rx Off */ - Wb35Reg_Write(pHwData, 0x0400, reg->D00_DmaControl); -} - -static unsigned char hal_idle(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (!pHwData->SurpriseRemove && reg->EP0vm_state != VM_STOP) - return false; - - return true; -} - -u8 hal_get_antenna_number(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - - if ((reg->BB2C & BIT(11)) == 0) - return 0; - else - return 1; -} - -/* 0 : radio on; 1: radio off */ -static u8 hal_get_hw_radio_off(struct hw_data *pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - - if (pHwData->SurpriseRemove) - return 1; - - /* read the bit16 of register U1B0 */ - Wb35Reg_Read(pHwData, 0x3b0, ®->U1B0); - if ((reg->U1B0 & 0x00010000)) { - pHwData->CurrentRadioHw = 1; - return 1; - } else { - pHwData->CurrentRadioHw = 0; - return 0; - } -} - -static u8 LED_GRAY[20] = { - 0, 3, 4, 6, 8, 10, 11, 12, 13, 14, 15, 14, 13, 12, 11, 10, 8, 6, 4, 2 -}; - -static u8 LED_GRAY2[30] = { - 7, 8, 9, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 15, 14, 13, 12, 11, 10, 9, 8 -}; - -static void hal_led_control(unsigned long data) -{ - struct wbsoft_priv *adapter = (struct wbsoft_priv *)data; - struct hw_data *pHwData = &adapter->sHwData; - struct wb35_reg *reg = &pHwData->reg; - u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT; - u32 TimeInterval = 500, ltmp, ltmp2; - ltmp = 0; - - if (pHwData->SurpriseRemove) - return; - - if (pHwData->LED_control) { - ltmp2 = pHwData->LED_control & 0xff; - if (ltmp2 == 5) { /* 5 is WPS mode */ - TimeInterval = 100; - ltmp2 = (pHwData->LED_control >> 8) & 0xff; - switch (ltmp2) { - case 1: /* [0.2 On][0.1 Off]... */ - pHwData->LED_Blinking %= 3; - ltmp = 0x1010; /* Led 1 & 0 Green and Red */ - if (pHwData->LED_Blinking == 2) /* Turn off */ - ltmp = 0; - break; - case 2: /* [0.1 On][0.1 Off]... */ - pHwData->LED_Blinking %= 2; - ltmp = 0x0010; /* Led 0 red color */ - if (pHwData->LED_Blinking) /* Turn off */ - ltmp = 0; - break; - case 3: /* [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]... */ - pHwData->LED_Blinking %= 15; - ltmp = 0x0010; /* Led 0 red color */ - if ((pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking % 2)) /* Turn off 0.6 sec */ - ltmp = 0; - break; - case 4: /* [300 On][ off ] */ - ltmp = 0x1000; /* Led 1 Green color */ - if (pHwData->LED_Blinking >= 3000) - ltmp = 0; /* led maybe on after 300sec * 32bit counter overlap. */ - break; - } - pHwData->LED_Blinking++; - - reg->U1BC_LEDConfigure = ltmp; - if (LEDSet != 7) { /* Only 111 mode has 2 LEDs on PCB. */ - reg->U1BC_LEDConfigure |= (ltmp & 0xff) << 8; /* Copy LED result to each LED control register */ - reg->U1BC_LEDConfigure |= (ltmp & 0xff00) >> 8; - } - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); - } - } else if (pHwData->CurrentRadioSw || pHwData->CurrentRadioHw) { /* If radio off */ - if (reg->U1BC_LEDConfigure & 0x1010) { - reg->U1BC_LEDConfigure &= ~0x1010; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); - } - } else { - switch (LEDSet) { - case 4: /* [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing */ - if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */ - /* Blinking if scanning is on progress */ - if (pHwData->LED_Scanning) { - if (pHwData->LED_Blinking == 0) { - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 On */ - pHwData->LED_Blinking = 1; - TimeInterval = 300; - } else { - reg->U1BC_LEDConfigure &= ~0x10; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */ - pHwData->LED_Blinking = 0; - TimeInterval = 300; - } - } else { - /* Turn Off LED_0 */ - if (reg->U1BC_LEDConfigure & 0x10) { - reg->U1BC_LEDConfigure &= ~0x10; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */ - } - } - } else { - /* Turn On LED_0 */ - if ((reg->U1BC_LEDConfigure & 0x10) == 0) { - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */ - } - } - break; - case 6: /* [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing */ - if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */ - /* Blinking if scanning is on progress */ - if (pHwData->LED_Scanning) { - if (pHwData->LED_Blinking == 0) { - reg->U1BC_LEDConfigure &= ~0xf; - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 On */ - pHwData->LED_Blinking = 1; - TimeInterval = 300; - } else { - reg->U1BC_LEDConfigure &= ~0x1f; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */ - pHwData->LED_Blinking = 0; - TimeInterval = 300; - } - } else { - /* Gray blinking if in disconnect state and not scanning */ - ltmp = reg->U1BC_LEDConfigure; - reg->U1BC_LEDConfigure &= ~0x1f; - if (LED_GRAY2[(pHwData->LED_Blinking % 30)]) { - reg->U1BC_LEDConfigure |= 0x10; - reg->U1BC_LEDConfigure |= - LED_GRAY2[(pHwData->LED_Blinking % 30)]; - } - pHwData->LED_Blinking++; - if (reg->U1BC_LEDConfigure != ltmp) - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */ - TimeInterval = 100; - } - } else { - /* Turn On LED_0 */ - if ((reg->U1BC_LEDConfigure & 0x10) == 0) { - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */ - } - } - break; - case 5: /* [101] Only 1 Led be placed on PCB and use LED_1 for showing */ - if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */ - /* Blinking if scanning is on progress */ - if (pHwData->LED_Scanning) { - if (pHwData->LED_Blinking == 0) { - reg->U1BC_LEDConfigure |= 0x1000; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 On */ - pHwData->LED_Blinking = 1; - TimeInterval = 300; - } else { - reg->U1BC_LEDConfigure &= ~0x1000; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 Off */ - pHwData->LED_Blinking = 0; - TimeInterval = 300; - } - } else { - /* Turn Off LED_1 */ - if (reg->U1BC_LEDConfigure & 0x1000) { - reg->U1BC_LEDConfigure &= ~0x1000; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 Off */ - } - } - } else { - /* Is transmitting/receiving ?? */ - if ((adapter->RxByteCount != - pHwData->RxByteCountLast) - || (adapter->TxByteCount != - pHwData->TxByteCountLast)) { - if ((reg->U1BC_LEDConfigure & 0x3000) != - 0x3000) { - reg->U1BC_LEDConfigure |= 0x3000; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 On */ - } - /* Update variable */ - pHwData->RxByteCountLast = - adapter->RxByteCount; - pHwData->TxByteCountLast = - adapter->TxByteCount; - TimeInterval = 200; - } else { - /* Turn On LED_1 and blinking if transmitting/receiving */ - if ((reg->U1BC_LEDConfigure & 0x3000) != - 0x1000) { - reg->U1BC_LEDConfigure &= - ~0x3000; - reg->U1BC_LEDConfigure |= - 0x1000; - Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 On */ - } - } - } - break; - default: /* Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active */ - if ((reg->U1BC_LEDConfigure & 0x3000) != 0x3000) { - reg->U1BC_LEDConfigure |= 0x3000; /* LED_1 is always on and event enable */ - Wb35Reg_Write(pHwData, 0x03bc, - reg->U1BC_LEDConfigure); - } - - if (pHwData->LED_Blinking) { - /* Gray blinking */ - reg->U1BC_LEDConfigure &= ~0x0f; - reg->U1BC_LEDConfigure |= 0x10; - reg->U1BC_LEDConfigure |= - LED_GRAY[(pHwData->LED_Blinking - 1) % 20]; - Wb35Reg_Write(pHwData, 0x03bc, - reg->U1BC_LEDConfigure); - - pHwData->LED_Blinking += 2; - if (pHwData->LED_Blinking < 40) - TimeInterval = 100; - else { - pHwData->LED_Blinking = 0; /* Stop blinking */ - reg->U1BC_LEDConfigure &= ~0x0f; - Wb35Reg_Write(pHwData, 0x03bc, - reg->U1BC_LEDConfigure); - } - break; - } - - if (pHwData->LED_LinkOn) { - if (!(reg->U1BC_LEDConfigure & 0x10)) { /* Check the LED_0 */ - /* Try to turn ON LED_0 after gray blinking */ - reg->U1BC_LEDConfigure |= 0x10; - pHwData->LED_Blinking = 1; /* Start blinking */ - TimeInterval = 50; - } - } else { - if (reg->U1BC_LEDConfigure & 0x10) { /* Check the LED_0 */ - reg->U1BC_LEDConfigure &= ~0x10; - Wb35Reg_Write(pHwData, 0x03bc, - reg->U1BC_LEDConfigure); - } - } - break; - } - } - - pHwData->time_count += TimeInterval; - Wb35Tx_CurrentTime(adapter, pHwData->time_count); - pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval); - add_timer(&pHwData->LEDTimer); -} - -static int hal_init_hardware(struct ieee80211_hw *hw) -{ - struct wbsoft_priv *priv = hw->priv; - struct hw_data *pHwData = &priv->sHwData; - u16 SoftwareSet; - - pHwData->MaxReceiveLifeTime = DEFAULT_MSDU_LIFE_TIME; - pHwData->FragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; - - if (!Wb35Reg_initial(pHwData)) - goto error_reg_destroy; - - if (!Wb35Tx_initial(pHwData)) - goto error_tx_destroy; - - if (!Wb35Rx_initial(pHwData)) - goto error_rx_destroy; - - init_timer(&pHwData->LEDTimer); - pHwData->LEDTimer.function = hal_led_control; - pHwData->LEDTimer.data = (unsigned long)priv; - pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(1000); - add_timer(&pHwData->LEDTimer); - - SoftwareSet = hal_software_set(pHwData); - - Wb35Rx_start(hw); - Wb35Tx_EP2VM_start(priv); - - return 0; - -error_rx_destroy: - Wb35Rx_destroy(pHwData); -error_tx_destroy: - Wb35Tx_destroy(pHwData); -error_reg_destroy: - Wb35Reg_destroy(pHwData); - - pHwData->SurpriseRemove = 1; - return -EINVAL; -} - -static int wb35_hw_init(struct ieee80211_hw *hw) -{ - struct wbsoft_priv *priv = hw->priv; - struct hw_data *pHwData = &priv->sHwData; - u8 EEPROM_region; - u8 HwRadioOff; - u8 *pMacAddr2; - u8 *pMacAddr; - int err; - - pHwData->phy_type = RF_DECIDE_BY_INF; - - priv->Mds.TxRTSThreshold = DEFAULT_RTSThreshold; - priv->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; - - priv->sLocalPara.region_INF = REGION_AUTO; - priv->sLocalPara.TxRateMode = RATE_AUTO; - priv->sLocalPara.bMacOperationMode = MODE_802_11_BG; - priv->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE; - priv->sLocalPara.bPreambleMode = AUTO_MODE; - priv->sLocalPara.bWepKeyError = false; - priv->sLocalPara.bToSelfPacketReceived = false; - priv->sLocalPara.WepKeyDetectTimerCount = 2 * 100; /* 2 seconds */ - - priv->sLocalPara.RadioOffStatus.boSwRadioOff = false; - - err = hal_init_hardware(hw); - if (err) - goto error; - - EEPROM_region = hal_get_region_from_EEPROM(pHwData); - if (EEPROM_region != REGION_AUTO) - priv->sLocalPara.region = EEPROM_region; - else { - if (priv->sLocalPara.region_INF != REGION_AUTO) - priv->sLocalPara.region = priv->sLocalPara.region_INF; - else - priv->sLocalPara.region = REGION_USA; /* default setting */ - } - - Mds_initial(priv); - - /* - * If no user-defined address in the registry, use the address - * "burned" on the NIC instead. - */ - pMacAddr = priv->sLocalPara.ThisMacAddress; - pMacAddr2 = priv->sLocalPara.PermanentAddress; - - /* Reading ethernet address from EEPROM */ - hal_get_permanent_address(pHwData, priv->sLocalPara.PermanentAddress); - if (memcmp(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH) == 0) - memcpy(pMacAddr, pMacAddr2, MAC_ADDR_LENGTH); - else { - /* Set the user define MAC address */ - hal_set_ethernet_address(pHwData, - priv->sLocalPara.ThisMacAddress); - } - - priv->sLocalPara.bAntennaNo = hal_get_antenna_number(pHwData); - hal_get_hw_radio_off(pHwData); - - /* Waiting for HAL setting OK */ - while (!hal_idle(pHwData)) - msleep(10); - - MTO_Init(priv); - - HwRadioOff = hal_get_hw_radio_off(pHwData); - priv->sLocalPara.RadioOffStatus.boHwRadioOff = !!HwRadioOff; - - hal_set_radio_mode(pHwData, - (unsigned char)(priv->sLocalPara.RadioOffStatus. - boSwRadioOff - || priv->sLocalPara.RadioOffStatus. - boHwRadioOff)); - - /* Notify hal that the driver is ready now. */ - hal_driver_init_OK(pHwData) = 1; - -error: - return err; -} - -static int wb35_probe(struct usb_interface *intf, - const struct usb_device_id *id_table) -{ - struct usb_device *udev = interface_to_usbdev(intf); - struct usb_endpoint_descriptor *endpoint; - struct usb_host_interface *interface; - struct ieee80211_hw *dev; - struct wbsoft_priv *priv; - int err; - u32 ltmp; - - usb_get_dev(udev); - - /* Check the device if it already be opened */ - err = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), - 0x01, - USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x0, 0x400, <mp, 4, HZ * 100); - if (err < 0) - goto error; - - /* Is already initialized? */ - ltmp = cpu_to_le32(ltmp); - if (ltmp) { - err = -EBUSY; - goto error; - } - - dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops); - if (!dev) { - err = -ENOMEM; - goto error; - } - - priv = dev->priv; - - priv->sHwData.udev = udev; - - interface = intf->cur_altsetting; - endpoint = &interface->endpoint[0].desc; - - err = wb35_hw_init(dev); - if (err) - goto error_free_hw; - - SET_IEEE80211_DEV(dev, &udev->dev); - { - struct hw_data *pHwData = &priv->sHwData; - unsigned char dev_addr[MAX_ADDR_LEN]; - hal_get_permanent_address(pHwData, dev_addr); - SET_IEEE80211_PERM_ADDR(dev, dev_addr); - } - - dev->extra_tx_headroom = 12; /* FIXME */ - dev->flags = IEEE80211_HW_SIGNAL_UNSPEC; - dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); - - dev->max_signal = 100; - dev->queues = 1; - - dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &wbsoft_band_2GHz; - - err = ieee80211_register_hw(dev); - if (err) - goto error_free_hw; - - usb_set_intfdata(intf, dev); - - return 0; - -error_free_hw: - ieee80211_free_hw(dev); -error: - usb_put_dev(udev); - return err; -} - -static void hal_halt(struct hw_data *pHwData) -{ - del_timer_sync(&pHwData->LEDTimer); - /* XXX: Wait for Timer DPC exit. */ - msleep(100); - Wb35Rx_destroy(pHwData); - Wb35Tx_destroy(pHwData); - Wb35Reg_destroy(pHwData); -} - -static void wb35_hw_halt(struct wbsoft_priv *adapter) -{ - /* Turn off Rx and Tx hardware ability */ - hal_stop(&adapter->sHwData); - /* Waiting Irp completed */ - msleep(100); - - hal_halt(&adapter->sHwData); -} - -static void wb35_disconnect(struct usb_interface *intf) -{ - struct ieee80211_hw *hw = usb_get_intfdata(intf); - struct wbsoft_priv *priv = hw->priv; - - wb35_hw_halt(priv); - - ieee80211_stop_queues(hw); - ieee80211_unregister_hw(hw); - ieee80211_free_hw(hw); - - usb_set_intfdata(intf, NULL); - usb_put_dev(interface_to_usbdev(intf)); -} - -static struct usb_driver wb35_driver = { - .name = "w35und", - .id_table = wb35_table, - .probe = wb35_probe, - .disconnect = wb35_disconnect, -}; - -module_usb_driver(wb35_driver); |