diff options
Diffstat (limited to 'drivers/staging/wlags49_h2/wl_profile.c')
| -rw-r--r-- | drivers/staging/wlags49_h2/wl_profile.c | 995 |
1 files changed, 0 insertions, 995 deletions
diff --git a/drivers/staging/wlags49_h2/wl_profile.c b/drivers/staging/wlags49_h2/wl_profile.c deleted file mode 100644 index 28cc5765e5c1..000000000000 --- a/drivers/staging/wlags49_h2/wl_profile.c +++ /dev/null @@ -1,995 +0,0 @@ -/******************************************************************************* - * Agere Systems Inc. - * Wireless device driver for Linux (wlags49). - * - * Copyright (c) 1998-2003 Agere Systems Inc. - * All rights reserved. - * http://www.agere.com - * - * Initially developed by TriplePoint, Inc. - * http://www.triplepoint.com - * - *------------------------------------------------------------------------------ - * - * This file defines routines required to parse configuration parameters - * listed in a config file, if that config file exists. - * - *------------------------------------------------------------------------------ - * - * SOFTWARE LICENSE - * - * This software is provided subject to the following terms and conditions, - * which you should read carefully before using the software. Using this - * software indicates your acceptance of these terms and conditions. If you do - * not agree with these terms and conditions, do not use the software. - * - * Copyright © 2003 Agere Systems Inc. - * All rights reserved. - * - * Redistribution and use in source or binary forms, with or without - * modifications, are permitted provided that the following conditions are met: - * - * . Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following Disclaimer as comments in the code as - * well as in the documentation and/or other materials provided with the - * distribution. - * - * . Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following Disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * . Neither the name of Agere Systems Inc. nor the names of the contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * Disclaimer - * - * THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY - * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN - * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - ******************************************************************************/ - -/* Only include this file if USE_PROFILE is defined */ -#ifdef USE_PROFILE - - - - -/******************************************************************************* - * constant definitions - ******************************************************************************/ - - -/* Allow support for calling system fcns to parse config file */ -#define __KERNEL_SYSCALLS__ - - - - -/******************************************************************************* - * include files - ******************************************************************************/ -#include <wl_version.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/unistd.h> -#include <asm/uaccess.h> -#include <limits.h> - -#define BIN_DL 1 - -#include <debug.h> -#include <hcf.h> -/* #include <hcfdef.h> */ - -#include <wl_if.h> -#include <wl_internal.h> -#include <wl_util.h> -#include <wl_enc.h> -#include <wl_main.h> -#include <wl_profile.h> - - -/* Definition needed to prevent unresolved external in unistd.h */ -static int errno; - -#if DBG -extern p_u32 DebugFlag; -#endif - -int parse_yes_no(char *value); - - -int parse_yes_no(char *value) -{ -int rc = 0; /* default to NO for invalid parameters */ - - if (strlen(value) == 1) { - if ((value[0] | ('Y'^'y')) == 'y') - rc = 1; - /* } else { */ - /* this should not be debug time info, it is an enduser data entry error ;? */ - /* DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_MICROWAVE_ROBUSTNESS); */ - } - return rc; -} /* parse_yes_no */ - - -/******************************************************************************* - * parse_config() - ******************************************************************************* - * - * DESCRIPTION: - * - * This function opens the device's config file and parses the options from - * it, so that it can properly configure itself. If no configuration file - * or configuration is present, then continue to use the options already - * parsed from config.opts or wireless.opts. - * - * PARAMETERS: - * - * dev - a pointer to the device's net_device structure - * - * RETURNS: - * - * N/A - * - ******************************************************************************/ -void parse_config(struct net_device *dev) -{ - int file_desc; -#if 0 /* BIN_DL */ - int rc; - char *cp = NULL; -#endif /* BIN_DL */ - char buffer[MAX_LINE_SIZE]; - char filename[MAX_LINE_SIZE]; - mm_segment_t fs; - struct wl_private *wvlan_config = NULL; - ENCSTRCT sEncryption; - - /* Get the wavelan specific info for this device */ - wvlan_config = dev->priv; - if (wvlan_config == NULL) { - DBG_ERROR(DbgInfo, "Wavelan specific info struct not present?\n"); - return; - } - - /* setup the default encryption string */ - strcpy(wvlan_config->szEncryption, DEF_CRYPT_STR); - - /* Obtain a user-space process context, storing the original context */ - fs = get_fs(); - set_fs(get_ds()); - - /* Determine the filename for this device and attempt to open it */ - sprintf(filename, "%s%s", ROOT_CONFIG_FILENAME, dev->name); - file_desc = open(filename, O_RDONLY, 0); - if (file_desc != -1) { - DBG_TRACE(DbgInfo, "Wireless config file found. Parsing options...\n"); - - /* Read out the options */ - while (readline(file_desc, buffer)) - translate_option(buffer, wvlan_config); - /* Close the file */ - close(file_desc); /* ;?even if file_desc == -1 ??? */ - } else { - DBG_TRACE(DbgInfo, "No iwconfig file found for this device; " - "config.opts or wireless.opts will be used\n"); - } - /* Return to the original context */ - set_fs(fs); - - /* convert the WEP keys, if read in as key1, key2, type of data */ - if (wvlan_config->EnableEncryption) { - memset(&sEncryption, 0, sizeof(sEncryption)); - - wl_wep_decode(CRYPT_CODE, &sEncryption, - wvlan_config->szEncryption); - - /* the Linux driver likes to use 1-4 for the key IDs, and then - convert to 0-3 when sending to the card. The Windows code - base used 0-3 in the API DLL, which was ported to Linux. For - the sake of the user experience, we decided to keep 0-3 as the - numbers used in the DLL; and will perform the +1 conversion here. - We could have converted the entire Linux driver, but this is - less obtrusive. This may be a "todo" to convert the whole driver */ - sEncryption.wEnabled = wvlan_config->EnableEncryption; - sEncryption.wTxKeyID = wvlan_config->TransmitKeyID - 1; - - memcpy(&sEncryption.EncStr, &wvlan_config->DefaultKeys, - sizeof(CFG_DEFAULT_KEYS_STRCT)); - - memset(wvlan_config->szEncryption, 0, sizeof(wvlan_config->szEncryption)); - - wl_wep_code(CRYPT_CODE, wvlan_config->szEncryption, &sEncryption, - sizeof(sEncryption)); - } - - /* decode the encryption string for the call to wl_commit() */ - wl_wep_decode(CRYPT_CODE, &sEncryption, wvlan_config->szEncryption); - - wvlan_config->TransmitKeyID = sEncryption.wTxKeyID + 1; - wvlan_config->EnableEncryption = sEncryption.wEnabled; - - memcpy(&wvlan_config->DefaultKeys, &sEncryption.EncStr, - sizeof(CFG_DEFAULT_KEYS_STRCT)); - -#if 0 /* BIN_DL */ - /* Obtain a user-space process context, storing the original context */ - fs = get_fs(); - set_fs(get_ds()); - - /* ;?just to fake something */ - strcpy(/*wvlan_config->fw_image_*/filename, "/etc/agere/fw.bin"); - file_desc = open(/*wvlan_config->fw_image_*/filename, 0, 0); - if (file_desc == -1) { - DBG_ERROR(DbgInfo, "No image file found\n"); - } else { - DBG_TRACE(DbgInfo, "F/W image file found\n"); -#define DHF_ALLOC_SIZE 96000 /* just below 96K, let's hope it suffices for now and for the future */ - cp = vmalloc(DHF_ALLOC_SIZE); - if (cp == NULL) { - DBG_ERROR(DbgInfo, "error in vmalloc\n"); - } else { - rc = read(file_desc, cp, DHF_ALLOC_SIZE); - if (rc == DHF_ALLOC_SIZE) { - DBG_ERROR(DbgInfo, "buffer too small, %d\n", DHF_ALLOC_SIZE); - } else if (rc > 0) { - DBG_TRACE(DbgInfo, "read O.K.: %d bytes %.12s\n", rc, cp); - rc = read(file_desc, &cp[rc], 1); - if (rc == 0) - DBG_TRACE(DbgInfo, "no more to read\n"); - } - if (rc != 0) { - DBG_ERROR(DbgInfo, "file not read in one swoop or other error"\ - ", give up, too complicated, rc = %0X\n", rc); - } - vfree(cp); - } - close(file_desc); - } - set_fs(fs); /* Return to the original context */ -#endif /* BIN_DL */ - - return; -} /* parse_config */ - -/******************************************************************************* - * readline() - ******************************************************************************* - * - * DESCRIPTION: - * - * This function reads in data from a given file one line at a time, - * converting the detected newline character '\n' to a null '\0'. Note that - * the file descriptor must be valid before calling this function. - * - * PARAMETERS: - * - * filedesc - the file descriptor for the open configuration file - * buffer - a buffer pointer, passed in by the caller, to which the - * line will be stored. - * - * RETURNS: - * - * the number of bytes read - * -1 on error - * - ******************************************************************************/ -int readline(int filedesc, char *buffer) -{ - int result = -1; - int bytes_read = 0; - /*------------------------------------------------------------------------*/ - - /* Make sure the file descriptor is good */ - if (filedesc != -1) { - /* Read in from the file byte by byte until a newline is reached */ - while ((result = read(filedesc, &buffer[bytes_read], 1)) == 1) { - if (buffer[bytes_read] == '\n') { - buffer[bytes_read] = '\0'; - bytes_read++; - break; - } - bytes_read++; - } - } - - /* Return the number of bytes read */ - if (result == -1) - return result; - else - return bytes_read; -} /* readline */ -/*============================================================================*/ - -/******************************************************************************* - * translate_option() - ******************************************************************************* - * - * DESCRIPTION: - * - * This function takes a line read in from the config file and parses out - * the key/value pairs. It then determines which key has been parsed and sets - * the card's configuration based on the value given. - * - * PARAMETERS: - * - * buffer - a buffer containing a line to translate - * config - a pointer to the device's private adapter structure - * - * RETURNS: - * - * N/A - * - ******************************************************************************/ -void translate_option(char *buffer, struct wl_private *lp) -{ - unsigned int value_convert = 0; - int string_length = 0; - char *key = NULL; - char *value = NULL; - u_char mac_value[ETH_ALEN]; - /*------------------------------------------------------------------------*/ - - if (buffer == NULL || lp == NULL) { - DBG_ERROR(DbgInfo, "Config file buffer and/or wavelan buffer ptr NULL\n"); - return; - } - - ParseConfigLine(buffer, &key, &value); - - if (key == NULL || value == NULL) - return; - - /* Determine which key it is and perform the appropriate action */ - - /* Configuration parameters used in all scenarios */ -#if DBG - /* handle DebugFlag as early as possible so it starts its influence as early - * as possible - */ - if (strcmp(key, PARM_NAME_DEBUG_FLAG) == 0) { - if (DebugFlag == ~0) { /* if DebugFlag is not specified on the command line */ - if (DbgInfo->DebugFlag == 0) { /* if pc_debug did not set DebugFlag (i.e.pc_debug is - * not specified or specified outside the 4-8 range - */ - DbgInfo->DebugFlag |= DBG_DEFAULTS; - } - } else { - DbgInfo->DebugFlag = simple_strtoul(value, NULL, 0); /* ;?DebugFlag; */ - } - DbgInfo->DebugFlag = simple_strtoul(value, NULL, 0); /* ;?Delete ASAP */ - } -#endif /* DBG */ - if (strcmp(key, PARM_NAME_AUTH_KEY_MGMT_SUITE) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_AUTH_KEY_MGMT_SUITE, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_AUTH_KEY_MGMT_SUITE) || (value_convert <= PARM_MAX_AUTH_KEY_MGMT_SUITE)) - lp->AuthKeyMgmtSuite = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_AUTH_KEY_MGMT_SUITE); - } else if (strcmp(key, PARM_NAME_BRSC_2GHZ) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_BRSC_2GHZ, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_BRSC) || (value_convert <= PARM_MAX_BRSC)) - lp->brsc[0] = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_BRSC_2GHZ); - } else if (strcmp(key, PARM_NAME_BRSC_5GHZ) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_BRSC_5GHZ, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_BRSC) || (value_convert <= PARM_MAX_BRSC)) - lp->brsc[1] = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_BRSC_5GHZ); - } else if ((strcmp(key, PARM_NAME_DESIRED_SSID) == 0) || (strcmp(key, PARM_NAME_OWN_SSID) == 0)) { - DBG_TRACE(DbgInfo, "SSID, value: %s\n", value); - - memset(lp->NetworkName, 0, (PARM_MAX_NAME_LEN + 1)); - - /* Make sure the value isn't too long */ - string_length = strlen(value); - if (string_length > PARM_MAX_NAME_LEN) { - DBG_WARNING(DbgInfo, "SSID too long; will be truncated\n"); - string_length = PARM_MAX_NAME_LEN; - } - - memcpy(lp->NetworkName, value, string_length); - } -#if 0 - else if (strcmp(key, PARM_NAME_DOWNLOAD_FIRMWARE) == 0) { - DBG_TRACE(DbgInfo, "DOWNLOAD_FIRMWARE, value: %s\n", value); - memset(lp->fw_image_filename, 0, (MAX_LINE_SIZE + 1)); - /* Make sure the value isn't too long */ - string_length = strlen(value); - if (string_length > MAX_LINE_SIZE) - DBG_WARNING(DbgInfo, "F/W image file name too long; will be ignored\n"); - else - memcpy(lp->fw_image_filename, value, string_length); - } -#endif - else if (strcmp(key, PARM_NAME_ENABLE_ENCRYPTION) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_ENABLE_ENCRYPTION, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_ENABLE_ENCRYPTION) && (value_convert <= PARM_MAX_ENABLE_ENCRYPTION)) - lp->EnableEncryption = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_ENABLE_ENCRYPTION); - } else if (strcmp(key, PARM_NAME_ENCRYPTION) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_ENCRYPTION, value); - - memset(lp->szEncryption, 0, sizeof(lp->szEncryption)); - - /* Make sure the value isn't too long */ - string_length = strlen(value); - if (string_length > sizeof(lp->szEncryption)) { - DBG_WARNING(DbgInfo, "%s too long; will be truncated\n", PARM_NAME_ENCRYPTION); - string_length = sizeof(lp->szEncryption); - } - - memcpy(lp->szEncryption, value, string_length); - } else if (strcmp(key, PARM_NAME_KEY1) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_KEY1, value); - - if (is_valid_key_string(value)) { - memset(lp->DefaultKeys.key[0].key, 0, MAX_KEY_SIZE); - - key_string2key(value, &lp->DefaultKeys.key[0]); - } else { - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_KEY1); - } - } else if (strcmp(key, PARM_NAME_KEY2) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_KEY2, value); - - if (is_valid_key_string(value)) { - memset(lp->DefaultKeys.key[1].key, 0, MAX_KEY_SIZE); - - key_string2key(value, &lp->DefaultKeys.key[1]); - } else { - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_KEY2); - } - } else if (strcmp(key, PARM_NAME_KEY3) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_KEY3, value); - - if (is_valid_key_string(value)) { - memset(lp->DefaultKeys.key[2].key, 0, MAX_KEY_SIZE); - - key_string2key(value, &lp->DefaultKeys.key[2]); - } else { - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_KEY3); - } - } else if (strcmp(key, PARM_NAME_KEY4) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_KEY4, value); - - if (is_valid_key_string(value)) { - memset(lp->DefaultKeys.key[3].key, 0, MAX_KEY_SIZE); - - key_string2key(value, &lp->DefaultKeys.key[3]); - } else { - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_KEY4); - } - } - /* New Parameters for WARP */ - else if (strcmp(key, PARM_NAME_LOAD_BALANCING) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_LOAD_BALANCING, value); - lp->loadBalancing = parse_yes_no(value); - } else if (strcmp(key, PARM_NAME_MEDIUM_DISTRIBUTION) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_MEDIUM_DISTRIBUTION, value); - lp->mediumDistribution = parse_yes_no(value); - } else if (strcmp(key, PARM_NAME_MICROWAVE_ROBUSTNESS) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_MICROWAVE_ROBUSTNESS, value); - lp->MicrowaveRobustness = parse_yes_no(value); - } else if (strcmp(key, PARM_NAME_MULTICAST_RATE) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_MULTICAST_RATE, value); - - value_convert = simple_strtoul(value, NULL, 0); - - if ((value_convert >= PARM_MIN_MULTICAST_RATE) && (value_convert <= PARM_MAX_MULTICAST_RATE)) - lp->MulticastRate[0] = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_MULTICAST_RATE); - } else if (strcmp(key, PARM_NAME_OWN_CHANNEL) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_OWN_CHANNEL, value); - - value_convert = simple_strtoul(value, NULL, 0); - if (wl_is_a_valid_chan(value_convert)) { - if (value_convert > 14) - value_convert = value_convert | 0x100; - lp->Channel = value_convert; - } else { - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_OWN_CHANNEL); - } - } else if (strcmp(key, PARM_NAME_OWN_NAME) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_OWN_NAME, value); - - memset(lp->StationName, 0, (PARM_MAX_NAME_LEN + 1)); - - /* Make sure the value isn't too long */ - string_length = strlen(value); - if (string_length > PARM_MAX_NAME_LEN) { - DBG_WARNING(DbgInfo, "%s too long; will be truncated\n", PARM_NAME_OWN_NAME); - string_length = PARM_MAX_NAME_LEN; - } - - memcpy(lp->StationName, value, string_length); - } else if (strcmp(key, PARM_NAME_RTS_THRESHOLD) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_RTS_THRESHOLD, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_RTS_THRESHOLD) && (value_convert <= PARM_MAX_RTS_THRESHOLD)) - lp->RTSThreshold = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_RTS_THRESHOLD); - } else if (strcmp(key, PARM_NAME_SRSC_2GHZ) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_SRSC_2GHZ, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_SRSC) || (value_convert <= PARM_MAX_SRSC)) - lp->srsc[0] = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_SRSC_2GHZ); - } else if (strcmp(key, PARM_NAME_SRSC_5GHZ) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_SRSC_5GHZ, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_SRSC) || (value_convert <= PARM_MAX_SRSC)) - lp->srsc[1] = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_SRSC_5GHZ); - } else if (strcmp(key, PARM_NAME_SYSTEM_SCALE) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_SYSTEM_SCALE, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_SYSTEM_SCALE) && (value_convert <= PARM_MAX_SYSTEM_SCALE)) - lp->DistanceBetweenAPs = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_SYSTEM_SCALE); - } else if (strcmp(key, PARM_NAME_TX_KEY) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_KEY, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_TX_KEY) && (value_convert <= PARM_MAX_TX_KEY)) - lp->TransmitKeyID = simple_strtoul(value, NULL, 0); - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_KEY); - } else if (strcmp(key, PARM_NAME_TX_RATE) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_RATE, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_TX_RATE) && (value_convert <= PARM_MAX_TX_RATE)) - lp->TxRateControl[0] = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_RATE); - } else if (strcmp(key, PARM_NAME_TX_POW_LEVEL) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_POW_LEVEL, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_TX_POW_LEVEL) || (value_convert <= PARM_MAX_TX_POW_LEVEL)) - lp->txPowLevel = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_POW_LEVEL); - } - - /* Need to add? : Country code, Short/Long retry */ - - /* Configuration parameters specific to STA mode */ -#if 1 /* ;? (HCF_TYPE) & HCF_TYPE_STA */ -/* ;?seems reasonable that even an AP-only driver could afford this small additional footprint */ - if (CNV_INT_TO_LITTLE(lp->hcfCtx.IFB_FWIdentity.comp_id) == COMP_ID_FW_STA) { - /* ;?should we return an error status in AP mode */ - if (strcmp(key, PARM_NAME_PORT_TYPE) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_PORT_TYPE, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert == PARM_MIN_PORT_TYPE) || (value_convert == PARM_MAX_PORT_TYPE)) - lp->PortType = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_PORT_TYPE); - } else if (strcmp(key, PARM_NAME_PM_ENABLED) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_PM_ENABLED, value); - value_convert = simple_strtoul(value, NULL, 0); - /* ;? how about wl_main.c containing - * VALID_PARAM(PARM_PM_ENABLED <= WVLAN_PM_STATE_STANDARD || - * (PARM_PM_ENABLED & 0x7FFF) <= WVLAN_PM_STATE_STANDARD); - */ - if ((value_convert & 0x7FFF) <= PARM_MAX_PM_ENABLED) { - lp->PMEnabled = value_convert; - } else { - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_PM_ENABLED); - /* ;?this is a data entry error, hence not a DBG_WARNING */ - } - } else if (strcmp(key, PARM_NAME_CREATE_IBSS) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_CREATE_IBSS, value); - lp->CreateIBSS = parse_yes_no(value); - } else if (strcmp(key, PARM_NAME_MULTICAST_RX) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_MULTICAST_RX, value); - lp->MulticastReceive = parse_yes_no(value); - } else if (strcmp(key, PARM_NAME_MAX_SLEEP) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_MAX_SLEEP, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= 0) && (value_convert <= 65535)) - lp->MaxSleepDuration = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_MAX_SLEEP); - } else if (strcmp(key, PARM_NAME_NETWORK_ADDR) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_NETWORK_ADDR, value); - - if (parse_mac_address(value, mac_value) == ETH_ALEN) - memcpy(lp->MACAddress, mac_value, ETH_ALEN); - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_NETWORK_ADDR); - } else if (strcmp(key, PARM_NAME_AUTHENTICATION) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_AUTHENTICATION, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_AUTHENTICATION) && (value_convert <= PARM_MAX_AUTHENTICATION)) - lp->authentication = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_AUTHENTICATION); - } else if (strcmp(key, PARM_NAME_OWN_ATIM_WINDOW) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_OWN_ATIM_WINDOW, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_OWN_ATIM_WINDOW) && (value_convert <= PARM_MAX_OWN_ATIM_WINDOW)) - lp->atimWindow = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_OWN_ATIM_WINDOW); - } else if (strcmp(key, PARM_NAME_PM_HOLDOVER_DURATION) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_PM_HOLDOVER_DURATION, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_PM_HOLDOVER_DURATION) && (value_convert <= PARM_MAX_PM_HOLDOVER_DURATION)) - lp->holdoverDuration = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_PM_HOLDOVER_DURATION); - } else if (strcmp(key, PARM_NAME_PROMISCUOUS_MODE) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_PROMISCUOUS_MODE, value); - lp->promiscuousMode = parse_yes_no(value); - } else if (strcmp(key, PARM_NAME_CONNECTION_CONTROL) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_CONNECTION_CONTROL, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_CONNECTION_CONTROL) && (value_convert <= PARM_MAX_CONNECTION_CONTROL)) - lp->connectionControl = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_CONNECTION_CONTROL); - } - - /* Need to add? : Probe Data Rate */ - } -#endif /* (HCF_TYPE) & HCF_TYPE_STA */ - - /* Configuration parameters specific to AP mode */ -#if 1 /* ;? (HCF_TYPE) & HCF_TYPE_AP */ - /* ;?should we restore this to allow smaller memory footprint */ - if (CNV_INT_TO_LITTLE(lp->hcfCtx.IFB_FWIdentity.comp_id) == COMP_ID_FW_AP) { - if (strcmp(key, PARM_NAME_OWN_DTIM_PERIOD) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_OWN_DTIM_PERIOD, value); - - value_convert = simple_strtoul(value, NULL, 0); - if (value_convert >= PARM_MIN_OWN_DTIM_PERIOD) - lp->DTIMPeriod = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_OWN_DTIM_PERIOD); - } else if (strcmp(key, PARM_NAME_REJECT_ANY) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_REJECT_ANY, value); - lp->RejectAny = parse_yes_no(value); - } else if (strcmp(key, PARM_NAME_EXCLUDE_UNENCRYPTED) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_EXCLUDE_UNENCRYPTED, value); - lp->ExcludeUnencrypted = parse_yes_no(value); - } else if (strcmp(key, PARM_NAME_MULTICAST_PM_BUFFERING) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_MULTICAST_PM_BUFFERING, value); - lp->ExcludeUnencrypted = parse_yes_no(value); - } else if (strcmp(key, PARM_NAME_INTRA_BSS_RELAY) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_INTRA_BSS_RELAY, value); - lp->ExcludeUnencrypted = parse_yes_no(value); - } else if (strcmp(key, PARM_NAME_OWN_BEACON_INTERVAL) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_OWN_BEACON_INTERVAL, value); - - value_convert = simple_strtoul(value, NULL, 0); - if (value_convert >= PARM_MIN_OWN_BEACON_INTERVAL) - lp->ownBeaconInterval = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_OWN_BEACON_INTERVAL); - } else if (strcmp(key, PARM_NAME_COEXISTENCE) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_COEXISTENCE, value); - - value_convert = simple_strtoul(value, NULL, 0); - if (value_convert >= PARM_MIN_COEXISTENCE) - lp->coexistence = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_COEXISTENCE); - } - -#ifdef USE_WDS - else if (strcmp(key, PARM_NAME_RTS_THRESHOLD1) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_RTS_THRESHOLD1, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_RTS_THRESHOLD) && (value_convert <= PARM_MAX_RTS_THRESHOLD)) - lp->wds_port[0].rtsThreshold = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_RTS_THRESHOLD1); - } else if (strcmp(key, PARM_NAME_RTS_THRESHOLD2) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_RTS_THRESHOLD2, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_RTS_THRESHOLD) && (value_convert <= PARM_MAX_RTS_THRESHOLD)) - lp->wds_port[1].rtsThreshold = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_RTS_THRESHOLD2); - } else if (strcmp(key, PARM_NAME_RTS_THRESHOLD3) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_RTS_THRESHOLD3, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_RTS_THRESHOLD) && (value_convert <= PARM_MAX_RTS_THRESHOLD)) - lp->wds_port[2].rtsThreshold = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_RTS_THRESHOLD3); - } else if (strcmp(key, PARM_NAME_RTS_THRESHOLD4) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_RTS_THRESHOLD4, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_RTS_THRESHOLD) && (value_convert <= PARM_MAX_RTS_THRESHOLD)) - lp->wds_port[3].rtsThreshold = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_RTS_THRESHOLD4); - } else if (strcmp(key, PARM_NAME_RTS_THRESHOLD5) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_RTS_THRESHOLD5, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_RTS_THRESHOLD) && (value_convert <= PARM_MAX_RTS_THRESHOLD)) - lp->wds_port[4].rtsThreshold = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_RTS_THRESHOLD5); - } else if (strcmp(key, PARM_NAME_RTS_THRESHOLD6) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_RTS_THRESHOLD6, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_RTS_THRESHOLD) && (value_convert <= PARM_MAX_RTS_THRESHOLD)) - lp->wds_port[5].rtsThreshold = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_RTS_THRESHOLD6); - } else if (strcmp(key, PARM_NAME_TX_RATE1) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_RATE1, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_TX_RATE) && (value_convert <= PARM_MAX_TX_RATE)) - lp->wds_port[0].txRateCntl = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_RATE1); - } else if (strcmp(key, PARM_NAME_TX_RATE2) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_RATE2, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_TX_RATE) && (value_convert <= PARM_MAX_TX_RATE)) - lp->wds_port[1].txRateCntl = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_RATE2); - } else if (strcmp(key, PARM_NAME_TX_RATE3) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_RATE3, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_TX_RATE) && (value_convert <= PARM_MAX_TX_RATE)) - lp->wds_port[2].txRateCntl = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_RATE3); - } else if (strcmp(key, PARM_NAME_TX_RATE4) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_RATE4, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_TX_RATE) && (value_convert <= PARM_MAX_TX_RATE)) - lp->wds_port[3].txRateCntl = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_RATE4); - } else if (strcmp(key, PARM_NAME_TX_RATE5) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_RATE5, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_TX_RATE) && (value_convert <= PARM_MAX_TX_RATE)) - lp->wds_port[4].txRateCntl = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_RATE5); - } else if (strcmp(key, PARM_NAME_TX_RATE6) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_TX_RATE6, value); - - value_convert = simple_strtoul(value, NULL, 0); - if ((value_convert >= PARM_MIN_TX_RATE) && (value_convert <= PARM_MAX_TX_RATE)) - lp->wds_port[5].txRateCntl = value_convert; - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_TX_RATE6); - } else if (strcmp(key, PARM_NAME_WDS_ADDRESS1) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_WDS_ADDRESS1, value); - - if (parse_mac_address(value, mac_value) == ETH_ALEN) - memcpy(lp->wds_port[0].wdsAddress, mac_value, ETH_ALEN); - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_WDS_ADDRESS1); - } else if (strcmp(key, PARM_NAME_WDS_ADDRESS2) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_WDS_ADDRESS2, value); - - if (parse_mac_address(value, mac_value) == ETH_ALEN) - memcpy(lp->wds_port[1].wdsAddress, mac_value, ETH_ALEN); - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_WDS_ADDRESS2); - } else if (strcmp(key, PARM_NAME_WDS_ADDRESS3) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_WDS_ADDRESS3, value); - - if (parse_mac_address(value, mac_value) == ETH_ALEN) - memcpy(lp->wds_port[2].wdsAddress, mac_value, ETH_ALEN); - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_WDS_ADDRESS3); - } else if (strcmp(key, PARM_NAME_WDS_ADDRESS4) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_WDS_ADDRESS4, value); - - if (parse_mac_address(value, mac_value) == ETH_ALEN) - memcpy(lp->wds_port[3].wdsAddress, mac_value, ETH_ALEN); - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_WDS_ADDRESS4); - } else if (strcmp(key, PARM_NAME_WDS_ADDRESS5) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_WDS_ADDRESS5, value); - - if (parse_mac_address(value, mac_value) == ETH_ALEN) - memcpy(lp->wds_port[4].wdsAddress, mac_value, ETH_ALEN); - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_WDS_ADDRESS5); - } else if (strcmp(key, PARM_NAME_WDS_ADDRESS6) == 0) { - DBG_TRACE(DbgInfo, "%s, value: %s\n", PARM_NAME_WDS_ADDRESS6, value); - - if (parse_mac_address(value, mac_value) == ETH_ALEN) - memcpy(lp->wds_port[5].wdsAddress, mac_value, ETH_ALEN); - else - DBG_WARNING(DbgInfo, "%s invalid; will be ignored\n", PARM_NAME_WDS_ADDRESS6); - } -#endif /* USE_WDS */ - } -#endif /* (HCF_TYPE) & HCF_TYPE_AP */ - - return; -} /* translate_option */ -/*============================================================================*/ - -/******************************************************************************* - * parse_mac_address() - ******************************************************************************* - * - * DESCRIPTION: - * - * This function will parse a mac address string and convert it to a byte - * array. - * - * PARAMETERS: - * - * value - the MAC address, represented as a string - * byte_array - the MAC address, represented as a byte array of length - * ETH_ALEN - * - * RETURNS: - * - * The number of bytes in the final MAC address, should equal to ETH_ALEN. - * - ******************************************************************************/ -int parse_mac_address(char *value, u_char *byte_array) -{ - int value_offset = 0; - int array_offset = 0; - int field_offset = 0; - char byte_field[3]; - /*------------------------------------------------------------------------*/ - - memset(byte_field, '\0', 3); - - while (value[value_offset] != '\0') { - /* Skip over the colon chars separating the bytes, if they exist */ - if (value[value_offset] == ':') { - value_offset++; - continue; - } - - byte_field[field_offset] = value[value_offset]; - field_offset++; - value_offset++; - - /* Once the byte_field is filled, convert it and store it */ - if (field_offset == 2) { - byte_field[field_offset] = '\0'; - byte_array[array_offset] = simple_strtoul(byte_field, NULL, 16); - field_offset = 0; - array_offset++; - } - } - - /* Use the array_offset as a check; 6 bytes should be written to the - byte_array */ - return array_offset; -} /* parse_mac_address */ -/*============================================================================*/ - -/******************************************************************************* - * ParseConfigLine() - ******************************************************************************* - * - * DESCRIPTION: - * - * Parses a line from the configuration file into an L-val and an R-val, - * representing a key/value pair. - * - * PARAMETERS: - * - * pszLine - the line from the config file to parse - * ppszLVal - the resulting L-val (Key) - * ppszRVal - the resulting R-val (Value) - * - * RETURNS: - * - * N/A - * - ******************************************************************************/ -void ParseConfigLine(char *pszLine, char **ppszLVal, char **ppszRVal) -{ - int i; - int size; - - /* get a snapshot of our string size */ - size = strlen(pszLine); - *ppszLVal = NULL; - *ppszRVal = NULL; - - if (pszLine[0] != '#' && /* skip the line if it is a comment */ - pszLine[0] != '\n' && /* if it's an empty UNIX line, do nothing */ - !(pszLine[0] == '\r' && pszLine[1] == '\n') /* if it's an empty MS-DOS line, do nothing */ - ) { - /* advance past any whitespace, and assign the L-value */ - for (i = 0; i < size; i++) { - if (pszLine[i] != ' ') { - *ppszLVal = &pszLine[i]; - break; - } - } - /* advance to the end of the l-value*/ - for (i++; i < size; i++) { - if (pszLine[i] == ' ' || pszLine[i] == '=') { - pszLine[i] = '\0'; - break; - } - } - /* make any whitespace and the equal sign a NULL character, and - advance to the R-Value */ - for (i++; i < size; i++) { - if (pszLine[i] == ' ' || pszLine[i] == '=') { - pszLine[i] = '\0'; - continue; - } - *ppszRVal = &pszLine[i]; - break; - } - /* make the line ending character(s) a NULL */ - for (i++; i < size; i++) { - if (pszLine[i] == '\n') - pszLine[i] = '\0'; - if ((pszLine[i] == '\r') && (pszLine[i+1] == '\n')) - pszLine[i] = '\0'; - } - } -} /* ParseConfigLine */ -/*============================================================================*/ - -#endif /* USE_PROFILE */ |