diff options
Diffstat (limited to 'drivers/thermal')
-rw-r--r-- | drivers/thermal/Kconfig | 2 | ||||
-rw-r--r-- | drivers/thermal/armada_thermal.c | 5 | ||||
-rw-r--r-- | drivers/thermal/cpu_cooling.c | 14 | ||||
-rw-r--r-- | drivers/thermal/db8500_thermal.c | 486 | ||||
-rw-r--r-- | drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c | 6 | ||||
-rw-r--r-- | drivers/thermal/intel/int340x_thermal/int3403_thermal.c | 2 | ||||
-rw-r--r-- | drivers/thermal/intel/int340x_thermal/processor_thermal_device.c | 96 | ||||
-rw-r--r-- | drivers/thermal/intel/intel_pch_thermal.c | 6 | ||||
-rw-r--r-- | drivers/thermal/qcom/tsens-8960.c | 2 | ||||
-rw-r--r-- | drivers/thermal/qcom/tsens-v0_1.c | 12 | ||||
-rw-r--r-- | drivers/thermal/qcom/tsens-v1.c | 1 | ||||
-rw-r--r-- | drivers/thermal/qcom/tsens.h | 1 | ||||
-rw-r--r-- | drivers/thermal/qoriq_thermal.c | 45 | ||||
-rw-r--r-- | drivers/thermal/rcar_gen3_thermal.c | 3 | ||||
-rw-r--r-- | drivers/thermal/tegra/soctherm.c | 2 | ||||
-rw-r--r-- | drivers/thermal/thermal_core.c | 44 | ||||
-rw-r--r-- | drivers/thermal/thermal_hwmon.c | 8 | ||||
-rw-r--r-- | drivers/thermal/thermal_mmio.c | 7 |
18 files changed, 296 insertions, 446 deletions
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 9966364a6deb..001a21abcc28 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -310,7 +310,7 @@ config DOVE_THERMAL config DB8500_THERMAL tristate "DB8500 thermal management" - depends on MFD_DB8500_PRCMU + depends on MFD_DB8500_PRCMU && OF default y help Adds DB8500 thermal management implementation according to the thermal diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index 8c07a393dc2e..709a22f455e9 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -53,7 +53,6 @@ #define CONTROL0_TSEN_MODE_EXTERNAL 0x2 #define CONTROL0_TSEN_MODE_MASK 0x3 -#define CONTROL1_TSEN_AVG_SHIFT 0 #define CONTROL1_TSEN_AVG_MASK 0x7 #define CONTROL1_EXT_TSEN_SW_RESET BIT(7) #define CONTROL1_EXT_TSEN_HW_RESETn BIT(8) @@ -267,8 +266,8 @@ static void armada_cp110_init(struct platform_device *pdev, /* Average the output value over 2^1 = 2 samples */ regmap_read(priv->syscon, data->syscon_control1_off, ®); - reg &= ~CONTROL1_TSEN_AVG_MASK << CONTROL1_TSEN_AVG_SHIFT; - reg |= 1 << CONTROL1_TSEN_AVG_SHIFT; + reg &= ~CONTROL1_TSEN_AVG_MASK; + reg |= 1; regmap_write(priv->syscon, data->syscon_control1_off, reg); } diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 391f39776c6a..6b9865c786ba 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -88,7 +88,7 @@ struct cpufreq_cooling_device { struct cpufreq_policy *policy; struct list_head node; struct time_in_idle *idle_time; - struct dev_pm_qos_request qos_req; + struct freq_qos_request qos_req; }; static DEFINE_IDA(cpufreq_ida); @@ -331,7 +331,7 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev, cpufreq_cdev->cpufreq_state = state; - return dev_pm_qos_update_request(&cpufreq_cdev->qos_req, + return freq_qos_update_request(&cpufreq_cdev->qos_req, cpufreq_cdev->freq_table[state].frequency); } @@ -615,9 +615,9 @@ __cpufreq_cooling_register(struct device_node *np, cooling_ops = &cpufreq_cooling_ops; } - ret = dev_pm_qos_add_request(dev, &cpufreq_cdev->qos_req, - DEV_PM_QOS_MAX_FREQUENCY, - cpufreq_cdev->freq_table[0].frequency); + ret = freq_qos_add_request(&policy->constraints, + &cpufreq_cdev->qos_req, FREQ_QOS_MAX, + cpufreq_cdev->freq_table[0].frequency); if (ret < 0) { pr_err("%s: Failed to add freq constraint (%d)\n", __func__, ret); @@ -637,7 +637,7 @@ __cpufreq_cooling_register(struct device_node *np, return cdev; remove_qos_req: - dev_pm_qos_remove_request(&cpufreq_cdev->qos_req); + freq_qos_remove_request(&cpufreq_cdev->qos_req); remove_ida: ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id); free_table: @@ -736,7 +736,7 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) mutex_unlock(&cooling_list_lock); thermal_cooling_device_unregister(cdev); - dev_pm_qos_remove_request(&cpufreq_cdev->qos_req); + freq_qos_remove_request(&cpufreq_cdev->qos_req); ida_simple_remove(&cpufreq_ida, cpufreq_cdev->id); kfree(cpufreq_cdev->idle_time); kfree(cpufreq_cdev->freq_table); diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c index b71a999d17d6..372dbbaaafb8 100644 --- a/drivers/thermal/db8500_thermal.c +++ b/drivers/thermal/db8500_thermal.c @@ -3,9 +3,9 @@ * db8500_thermal.c - DB8500 Thermal Management Implementation * * Copyright (C) 2012 ST-Ericsson - * Copyright (C) 2012 Linaro Ltd. + * Copyright (C) 2012-2019 Linaro Ltd. * - * Author: Hongbo Zhang <hongbo.zhang@linaro.com> + * Authors: Hongbo Zhang, Linus Walleij */ #include <linux/cpu_cooling.h> @@ -13,7 +13,6 @@ #include <linux/mfd/dbx500-prcmu.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/platform_data/db8500_thermal.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/thermal.h> @@ -21,453 +20,201 @@ #define PRCMU_DEFAULT_MEASURE_TIME 0xFFF #define PRCMU_DEFAULT_LOW_TEMP 0 +/** + * db8500_thermal_points - the interpolation points that trigger + * interrupts + */ +static const unsigned long db8500_thermal_points[] = { + 15000, + 20000, + 25000, + 30000, + 35000, + 40000, + 45000, + 50000, + 55000, + 60000, + 65000, + 70000, + 75000, + 80000, + /* + * This is where things start to get really bad for the + * SoC and the thermal zones should be set up to trigger + * critical temperature at 85000 mC so we don't get above + * this point. + */ + 85000, + 90000, + 95000, + 100000, +}; + struct db8500_thermal_zone { - struct thermal_zone_device *therm_dev; - struct mutex th_lock; - struct work_struct therm_work; - struct db8500_thsens_platform_data *trip_tab; - enum thermal_device_mode mode; + struct thermal_zone_device *tz; enum thermal_trend trend; - unsigned long cur_temp_pseudo; + unsigned long interpolated_temp; unsigned int cur_index; }; -/* Local function to check if thermal zone matches cooling devices */ -static int db8500_thermal_match_cdev(struct thermal_cooling_device *cdev, - struct db8500_trip_point *trip_point) -{ - int i; - - if (!strlen(cdev->type)) - return -EINVAL; - - for (i = 0; i < COOLING_DEV_MAX; i++) { - if (!strcmp(trip_point->cdev_name[i], cdev->type)) - return 0; - } - - return -ENODEV; -} - -/* Callback to bind cooling device to thermal zone */ -static int db8500_cdev_bind(struct thermal_zone_device *thermal, - struct thermal_cooling_device *cdev) -{ - struct db8500_thermal_zone *pzone = thermal->devdata; - struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; - unsigned long max_state, upper, lower; - int i, ret = -EINVAL; - - cdev->ops->get_max_state(cdev, &max_state); - - for (i = 0; i < ptrips->num_trips; i++) { - if (db8500_thermal_match_cdev(cdev, &ptrips->trip_points[i])) - continue; - - upper = lower = i > max_state ? max_state : i; - - ret = thermal_zone_bind_cooling_device(thermal, i, cdev, - upper, lower, THERMAL_WEIGHT_DEFAULT); - - dev_info(&cdev->device, "%s bind to %d: %d-%s\n", cdev->type, - i, ret, ret ? "fail" : "succeed"); - } - - return ret; -} - -/* Callback to unbind cooling device from thermal zone */ -static int db8500_cdev_unbind(struct thermal_zone_device *thermal, - struct thermal_cooling_device *cdev) -{ - struct db8500_thermal_zone *pzone = thermal->devdata; - struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; - int i, ret = -EINVAL; - - for (i = 0; i < ptrips->num_trips; i++) { - if (db8500_thermal_match_cdev(cdev, &ptrips->trip_points[i])) - continue; - - ret = thermal_zone_unbind_cooling_device(thermal, i, cdev); - - dev_info(&cdev->device, "%s unbind from %d: %s\n", cdev->type, - i, ret ? "fail" : "succeed"); - } - - return ret; -} - /* Callback to get current temperature */ -static int db8500_sys_get_temp(struct thermal_zone_device *thermal, int *temp) +static int db8500_thermal_get_temp(void *data, int *temp) { - struct db8500_thermal_zone *pzone = thermal->devdata; + struct db8500_thermal_zone *th = data; /* * TODO: There is no PRCMU interface to get temperature data currently, * so a pseudo temperature is returned , it works for thermal framework * and this will be fixed when the PRCMU interface is available. */ - *temp = pzone->cur_temp_pseudo; + *temp = th->interpolated_temp; return 0; } /* Callback to get temperature changing trend */ -static int db8500_sys_get_trend(struct thermal_zone_device *thermal, - int trip, enum thermal_trend *trend) -{ - struct db8500_thermal_zone *pzone = thermal->devdata; - - *trend = pzone->trend; - - return 0; -} - -/* Callback to get thermal zone mode */ -static int db8500_sys_get_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode *mode) -{ - struct db8500_thermal_zone *pzone = thermal->devdata; - - mutex_lock(&pzone->th_lock); - *mode = pzone->mode; - mutex_unlock(&pzone->th_lock); - - return 0; -} - -/* Callback to set thermal zone mode */ -static int db8500_sys_set_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode mode) -{ - struct db8500_thermal_zone *pzone = thermal->devdata; - - mutex_lock(&pzone->th_lock); - - pzone->mode = mode; - if (mode == THERMAL_DEVICE_ENABLED) - schedule_work(&pzone->therm_work); - - mutex_unlock(&pzone->th_lock); - - return 0; -} - -/* Callback to get trip point type */ -static int db8500_sys_get_trip_type(struct thermal_zone_device *thermal, - int trip, enum thermal_trip_type *type) -{ - struct db8500_thermal_zone *pzone = thermal->devdata; - struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; - - if (trip >= ptrips->num_trips) - return -EINVAL; - - *type = ptrips->trip_points[trip].type; - - return 0; -} - -/* Callback to get trip point temperature */ -static int db8500_sys_get_trip_temp(struct thermal_zone_device *thermal, - int trip, int *temp) +static int db8500_thermal_get_trend(void *data, int trip, enum thermal_trend *trend) { - struct db8500_thermal_zone *pzone = thermal->devdata; - struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; + struct db8500_thermal_zone *th = data; - if (trip >= ptrips->num_trips) - return -EINVAL; - - *temp = ptrips->trip_points[trip].temp; + *trend = th->trend; return 0; } -/* Callback to get critical trip point temperature */ -static int db8500_sys_get_crit_temp(struct thermal_zone_device *thermal, - int *temp) -{ - struct db8500_thermal_zone *pzone = thermal->devdata; - struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; - int i; - - for (i = ptrips->num_trips - 1; i > 0; i--) { - if (ptrips->trip_points[i].type == THERMAL_TRIP_CRITICAL) { - *temp = ptrips->trip_points[i].temp; - return 0; - } - } - - return -EINVAL; -} - -static struct thermal_zone_device_ops thdev_ops = { - .bind = db8500_cdev_bind, - .unbind = db8500_cdev_unbind, - .get_temp = db8500_sys_get_temp, - .get_trend = db8500_sys_get_trend, - .get_mode = db8500_sys_get_mode, - .set_mode = db8500_sys_set_mode, - .get_trip_type = db8500_sys_get_trip_type, - .get_trip_temp = db8500_sys_get_trip_temp, - .get_crit_temp = db8500_sys_get_crit_temp, +static struct thermal_zone_of_device_ops thdev_ops = { + .get_temp = db8500_thermal_get_temp, + .get_trend = db8500_thermal_get_trend, }; -static void db8500_thermal_update_config(struct db8500_thermal_zone *pzone, - unsigned int idx, enum thermal_trend trend, - unsigned long next_low, unsigned long next_high) +static void db8500_thermal_update_config(struct db8500_thermal_zone *th, + unsigned int idx, + enum thermal_trend trend, + unsigned long next_low, + unsigned long next_high) { prcmu_stop_temp_sense(); - pzone->cur_index = idx; - pzone->cur_temp_pseudo = (next_low + next_high)/2; - pzone->trend = trend; + th->cur_index = idx; + th->interpolated_temp = (next_low + next_high)/2; + th->trend = trend; + /* + * The PRCMU accept absolute temperatures in celsius so divide + * down the millicelsius with 1000 + */ prcmu_config_hotmon((u8)(next_low/1000), (u8)(next_high/1000)); prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME); } static irqreturn_t prcmu_low_irq_handler(int irq, void *irq_data) { - struct db8500_thermal_zone *pzone = irq_data; - struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; - unsigned int idx = pzone->cur_index; + struct db8500_thermal_zone *th = irq_data; + unsigned int idx = th->cur_index; unsigned long next_low, next_high; - if (unlikely(idx == 0)) + if (idx == 0) /* Meaningless for thermal management, ignoring it */ return IRQ_HANDLED; if (idx == 1) { - next_high = ptrips->trip_points[0].temp; + next_high = db8500_thermal_points[0]; next_low = PRCMU_DEFAULT_LOW_TEMP; } else { - next_high = ptrips->trip_points[idx-1].temp; - next_low = ptrips->trip_points[idx-2].temp; + next_high = db8500_thermal_points[idx - 1]; + next_low = db8500_thermal_points[idx - 2]; } idx -= 1; - db8500_thermal_update_config(pzone, idx, THERMAL_TREND_DROPPING, - next_low, next_high); - - dev_dbg(&pzone->therm_dev->device, + db8500_thermal_update_config(th, idx, THERMAL_TREND_DROPPING, + next_low, next_high); + dev_dbg(&th->tz->device, "PRCMU set max %ld, min %ld\n", next_high, next_low); - schedule_work(&pzone->therm_work); + thermal_zone_device_update(th->tz, THERMAL_EVENT_UNSPECIFIED); return IRQ_HANDLED; } static irqreturn_t prcmu_high_irq_handler(int irq, void *irq_data) { - struct db8500_thermal_zone *pzone = irq_data; - struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; - unsigned int idx = pzone->cur_index; + struct db8500_thermal_zone *th = irq_data; + unsigned int idx = th->cur_index; unsigned long next_low, next_high; + int num_points = ARRAY_SIZE(db8500_thermal_points); - if (idx < ptrips->num_trips - 1) { - next_high = ptrips->trip_points[idx+1].temp; - next_low = ptrips->trip_points[idx].temp; + if (idx < num_points - 1) { + next_high = db8500_thermal_points[idx+1]; + next_low = db8500_thermal_points[idx]; idx += 1; - db8500_thermal_update_config(pzone, idx, THERMAL_TREND_RAISING, - next_low, next_high); + db8500_thermal_update_config(th, idx, THERMAL_TREND_RAISING, + next_low, next_high); - dev_dbg(&pzone->therm_dev->device, - "PRCMU set max %ld, min %ld\n", next_high, next_low); - } else if (idx == ptrips->num_trips - 1) - pzone->cur_temp_pseudo = ptrips->trip_points[idx].temp + 1; + dev_info(&th->tz->device, + "PRCMU set max %ld, min %ld\n", next_high, next_low); + } else if (idx == num_points - 1) + /* So we roof out 1 degree over the max point */ + th->interpolated_temp = db8500_thermal_points[idx] + 1; - schedule_work(&pzone->therm_work); + thermal_zone_device_update(th->tz, THERMAL_EVENT_UNSPECIFIED); return IRQ_HANDLED; } -static void db8500_thermal_work(struct work_struct *work) -{ - enum thermal_device_mode cur_mode; - struct db8500_thermal_zone *pzone; - - pzone = container_of(work, struct db8500_thermal_zone, therm_work); - - mutex_lock(&pzone->th_lock); - cur_mode = pzone->mode; - mutex_unlock(&pzone->th_lock); - - if (cur_mode == THERMAL_DEVICE_DISABLED) - return; - - thermal_zone_device_update(pzone->therm_dev, THERMAL_EVENT_UNSPECIFIED); - dev_dbg(&pzone->therm_dev->device, "thermal work finished.\n"); -} - -#ifdef CONFIG_OF -static struct db8500_thsens_platform_data* - db8500_thermal_parse_dt(struct platform_device *pdev) -{ - struct db8500_thsens_platform_data *ptrips; - struct device_node *np = pdev->dev.of_node; - char prop_name[32]; - const char *tmp_str; - u32 tmp_data; - int i, j; - - ptrips = devm_kzalloc(&pdev->dev, sizeof(*ptrips), GFP_KERNEL); - if (!ptrips) - return NULL; - - if (of_property_read_u32(np, "num-trips", &tmp_data)) - goto err_parse_dt; - - if (tmp_data > THERMAL_MAX_TRIPS) - goto err_parse_dt; - - ptrips->num_trips = tmp_data; - - for (i = 0; i < ptrips->num_trips; i++) { - sprintf(prop_name, "trip%d-temp", i); - if (of_property_read_u32(np, prop_name, &tmp_data)) - goto err_parse_dt; - - ptrips->trip_points[i].temp = tmp_data; - - sprintf(prop_name, "trip%d-type", i); - if (of_property_read_string(np, prop_name, &tmp_str)) - goto err_parse_dt; - - if (!strcmp(tmp_str, "active")) - ptrips->trip_points[i].type = THERMAL_TRIP_ACTIVE; - else if (!strcmp(tmp_str, "passive")) - ptrips->trip_points[i].type = THERMAL_TRIP_PASSIVE; - else if (!strcmp(tmp_str, "hot")) - ptrips->trip_points[i].type = THERMAL_TRIP_HOT; - else if (!strcmp(tmp_str, "critical")) - ptrips->trip_points[i].type = THERMAL_TRIP_CRITICAL; - else - goto err_parse_dt; - - sprintf(prop_name, "trip%d-cdev-num", i); - if (of_property_read_u32(np, prop_name, &tmp_data)) - goto err_parse_dt; - - if (tmp_data > COOLING_DEV_MAX) - goto err_parse_dt; - - for (j = 0; j < tmp_data; j++) { - sprintf(prop_name, "trip%d-cdev-name%d", i, j); - if (of_property_read_string(np, prop_name, &tmp_str)) - goto err_parse_dt; - - if (strlen(tmp_str) >= THERMAL_NAME_LENGTH) - goto err_parse_dt; - - strcpy(ptrips->trip_points[i].cdev_name[j], tmp_str); - } - } - return ptrips; - -err_parse_dt: - dev_err(&pdev->dev, "Parsing device tree data error.\n"); - return NULL; -} -#else -static inline struct db8500_thsens_platform_data* - db8500_thermal_parse_dt(struct platform_device *pdev) -{ - return NULL; -} -#endif - static int db8500_thermal_probe(struct platform_device *pdev) { - struct db8500_thermal_zone *pzone = NULL; - struct db8500_thsens_platform_data *ptrips = NULL; - struct device_node *np = pdev->dev.of_node; + struct db8500_thermal_zone *th = NULL; + struct device *dev = &pdev->dev; int low_irq, high_irq, ret = 0; - unsigned long dft_low, dft_high; - if (np) - ptrips = db8500_thermal_parse_dt(pdev); - else - ptrips = dev_get_platdata(&pdev->dev); - - if (!ptrips) - return -EINVAL; - - pzone = devm_kzalloc(&pdev->dev, sizeof(*pzone), GFP_KERNEL); - if (!pzone) + th = devm_kzalloc(dev, sizeof(*th), GFP_KERNEL); + if (!th) return -ENOMEM; - mutex_init(&pzone->th_lock); - mutex_lock(&pzone->th_lock); - - pzone->mode = THERMAL_DEVICE_DISABLED; - pzone->trip_tab = ptrips; - - INIT_WORK(&pzone->therm_work, db8500_thermal_work); - low_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW"); if (low_irq < 0) { - dev_err(&pdev->dev, "Get IRQ_HOTMON_LOW failed.\n"); - ret = low_irq; - goto out_unlock; + dev_err(dev, "Get IRQ_HOTMON_LOW failed\n"); + return low_irq; } - ret = devm_request_threaded_irq(&pdev->dev, low_irq, NULL, + ret = devm_request_threaded_irq(dev, low_irq, NULL, prcmu_low_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, - "dbx500_temp_low", pzone); + "dbx500_temp_low", th); if (ret < 0) { - dev_err(&pdev->dev, "Failed to allocate temp low irq.\n"); - goto out_unlock; + dev_err(dev, "failed to allocate temp low irq\n"); + return ret; } high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH"); if (high_irq < 0) { - dev_err(&pdev->dev, "Get IRQ_HOTMON_HIGH failed.\n"); - ret = high_irq; - goto out_unlock; + dev_err(dev, "Get IRQ_HOTMON_HIGH failed\n"); + return high_irq; } - ret = devm_request_threaded_irq(&pdev->dev, high_irq, NULL, + ret = devm_request_threaded_irq(dev, high_irq, NULL, prcmu_high_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, - "dbx500_temp_high", pzone); + "dbx500_temp_high", th); if (ret < 0) { - dev_err(&pdev->dev, "Failed to allocate temp high irq.\n"); - goto out_unlock; + dev_err(dev, "failed to allocate temp high irq\n"); + return ret; } - pzone->therm_dev = thermal_zone_device_register("db8500_thermal_zone", - ptrips->num_trips, 0, pzone, &thdev_ops, NULL, 0, 0); - - if (IS_ERR(pzone->therm_dev)) { - dev_err(&pdev->dev, "Register thermal zone device failed.\n"); - ret = PTR_ERR(pzone->therm_dev); - goto out_unlock; + /* register of thermal sensor and get info from DT */ + th->tz = devm_thermal_zone_of_sensor_register(dev, 0, th, &thdev_ops); + if (IS_ERR(th->tz)) { + dev_err(dev, "register thermal zone sensor failed\n"); + return PTR_ERR(th->tz); } - dev_info(&pdev->dev, "Thermal zone device registered.\n"); - - dft_low = PRCMU_DEFAULT_LOW_TEMP; - dft_high = ptrips->trip_points[0].temp; - - db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE, - dft_low, dft_high); - - platform_set_drvdata(pdev, pzone); - pzone->mode = THERMAL_DEVICE_ENABLED; + dev_info(dev, "thermal zone sensor registered\n"); -out_unlock: - mutex_unlock(&pzone->th_lock); + /* Start measuring at the lowest point */ + db8500_thermal_update_config(th, 0, THERMAL_TREND_STABLE, + PRCMU_DEFAULT_LOW_TEMP, + db8500_thermal_points[0]); - return ret; -} - -static int db8500_thermal_remove(struct platform_device *pdev) -{ - struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); - - thermal_zone_device_unregister(pzone->therm_dev); - cancel_work_sync(&pzone->therm_work); - mutex_destroy(&pzone->th_lock); + platform_set_drvdata(pdev, th); return 0; } @@ -475,9 +222,6 @@ static int db8500_thermal_remove(struct platform_device *pdev) static int db8500_thermal_suspend(struct platform_device *pdev, pm_message_t state) { - struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); - - flush_work(&pzone->therm_work); prcmu_stop_temp_sense(); return 0; @@ -485,26 +229,21 @@ static int db8500_thermal_suspend(struct platform_device *pdev, static int db8500_thermal_resume(struct platform_device *pdev) { - struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev); - struct db8500_thsens_platform_data *ptrips = pzone->trip_tab; - unsigned long dft_low, dft_high; - - dft_low = PRCMU_DEFAULT_LOW_TEMP; - dft_high = ptrips->trip_points[0].temp; + struct db8500_thermal_zone *th = platform_get_drvdata(pdev); - db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE, - dft_low, dft_high); + /* Resume and start measuring at the lowest point */ + db8500_thermal_update_config(th, 0, THERMAL_TREND_STABLE, + PRCMU_DEFAULT_LOW_TEMP, + db8500_thermal_points[0]); return 0; } -#ifdef CONFIG_OF static const struct of_device_id db8500_thermal_match[] = { { .compatible = "stericsson,db8500-thermal" }, {}, }; MODULE_DEVICE_TABLE(of, db8500_thermal_match); -#endif static struct platform_driver db8500_thermal_driver = { .driver = { @@ -514,7 +253,6 @@ static struct platform_driver db8500_thermal_driver = { .probe = db8500_thermal_probe, .suspend = db8500_thermal_suspend, .resume = db8500_thermal_resume, - .remove = db8500_thermal_remove, }; module_platform_driver(db8500_thermal_driver); diff --git a/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c index 9716bc3abaf9..7130e90773ed 100644 --- a/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c +++ b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c @@ -77,9 +77,6 @@ int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trtp, struct acpi_buffer element = { 0, NULL }; struct acpi_buffer trt_format = { sizeof("RRNNNNNN"), "RRNNNNNN" }; - if (!acpi_has_method(handle, "_TRT")) - return -ENODEV; - status = acpi_evaluate_object(handle, "_TRT", NULL, &buffer); if (ACPI_FAILURE(status)) return -ENODEV; @@ -158,9 +155,6 @@ int acpi_parse_art(acpi_handle handle, int *art_count, struct art **artp, struct acpi_buffer art_format = { sizeof("RRNNNNNNNNNNN"), "RRNNNNNNNNNNN" }; - if (!acpi_has_method(handle, "_ART")) - return -ENODEV; - status = acpi_evaluate_object(handle, "_ART", NULL, &buffer); if (ACPI_FAILURE(status)) return -ENODEV; diff --git a/drivers/thermal/intel/int340x_thermal/int3403_thermal.c b/drivers/thermal/intel/int340x_thermal/int3403_thermal.c index f5749d4418ae..a7bbd8584ae2 100644 --- a/drivers/thermal/intel/int340x_thermal/int3403_thermal.c +++ b/drivers/thermal/intel/int340x_thermal/int3403_thermal.c @@ -181,7 +181,7 @@ static int int3403_cdev_add(struct int3403_priv *priv) p = buf.pointer; if (!p || (p->type != ACPI_TYPE_PACKAGE)) { - printk(KERN_WARNING "Invalid PPSS data\n"); + pr_warn("Invalid PPSS data\n"); kfree(buf.pointer); return -EFAULT; } diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c index d3446acf9bbd..89a015387283 100644 --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c @@ -39,6 +39,9 @@ /* GeminiLake thermal reporting device */ #define PCI_DEVICE_ID_PROC_GLK_THERMAL 0x318C +/* IceLake thermal reporting device */ +#define PCI_DEVICE_ID_PROC_ICL_THERMAL 0x8a03 + #define DRV_NAME "proc_thermal" struct power_config { @@ -137,6 +140,72 @@ static const struct attribute_group power_limit_attribute_group = { .name = "power_limits" }; +static ssize_t tcc_offset_degree_celsius_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u64 val; + int err; + + err = rdmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, &val); + if (err) + return err; + + val = (val >> 24) & 0xff; + return sprintf(buf, "%d\n", (int)val); +} + +static int tcc_offset_update(int tcc) +{ + u64 val; + int err; + + if (!tcc) + return -EINVAL; + + err = rdmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, &val); + if (err) + return err; + + val &= ~GENMASK_ULL(31, 24); + val |= (tcc & 0xff) << 24; + + err = wrmsrl_safe(MSR_IA32_TEMPERATURE_TARGET, val); + if (err) + return err; + + return 0; +} + +static int tcc_offset_save; + +static ssize_t tcc_offset_degree_celsius_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + u64 val; + int tcc, err; + + err = rdmsrl_safe(MSR_PLATFORM_INFO, &val); + if (err) + return err; + + if (!(val & BIT(30))) + return -EACCES; + + if (kstrtoint(buf, 0, &tcc)) + return -EINVAL; + + err = tcc_offset_update(tcc); + if (err) + return err; + + tcc_offset_save = tcc; + + return count; +} + +static DEVICE_ATTR_RW(tcc_offset_degree_celsius); + static int stored_tjmax; /* since it is fixed, we can have local storage */ static int get_tjmax(void) @@ -332,6 +401,7 @@ static void proc_thermal_remove(struct proc_thermal_device *proc_priv) acpi_remove_notify_handler(proc_priv->adev->handle, ACPI_DEVICE_NOTIFY, proc_thermal_notify); int340x_thermal_zone_remove(proc_priv->int340x_zone); + sysfs_remove_file(&proc_priv->dev->kobj, &dev_attr_tcc_offset_degree_celsius.attr); sysfs_remove_group(&proc_priv->dev->kobj, &power_limit_attribute_group); } @@ -355,8 +425,15 @@ static int int3401_add(struct platform_device *pdev) dev_info(&pdev->dev, "Creating sysfs group for PROC_THERMAL_PLATFORM_DEV\n"); - return sysfs_create_group(&pdev->dev.kobj, - &power_limit_attribute_group); + ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_tcc_offset_degree_celsius.attr); + if (ret) + return ret; + + ret = sysfs_create_group(&pdev->dev.kobj, &power_limit_attribute_group); + if (ret) + sysfs_remove_file(&pdev->dev.kobj, &dev_attr_tcc_offset_degree_celsius.attr); + + return ret; } static int int3401_remove(struct platform_device *pdev) @@ -588,8 +665,15 @@ static int proc_thermal_pci_probe(struct pci_dev *pdev, dev_info(&pdev->dev, "Creating sysfs group for PROC_THERMAL_PCI\n"); - return sysfs_create_group(&pdev->dev.kobj, - &power_limit_attribute_group); + ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_tcc_offset_degree_celsius.attr); + if (ret) + return ret; + + ret = sysfs_create_group(&pdev->dev.kobj, &power_limit_attribute_group); + if (ret) + sysfs_remove_file(&pdev->dev.kobj, &dev_attr_tcc_offset_degree_celsius.attr); + + return ret; } static void proc_thermal_pci_remove(struct pci_dev *pdev) @@ -615,6 +699,8 @@ static int proc_thermal_resume(struct device *dev) proc_dev = dev_get_drvdata(dev); proc_thermal_read_ppcc(proc_dev); + tcc_offset_update(tcc_offset_save); + return 0; } #else @@ -636,6 +722,8 @@ static const struct pci_device_id proc_thermal_pci_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_CNL_THERMAL)}, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_CFL_THERMAL)}, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_GLK_THERMAL)}, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_ICL_THERMAL), + .driver_data = (kernel_ulong_t)&rapl_mmio_hsw, }, { 0, }, }; diff --git a/drivers/thermal/intel/intel_pch_thermal.c b/drivers/thermal/intel/intel_pch_thermal.c index 99f8b2540f18..4f0bb8f502e1 100644 --- a/drivers/thermal/intel/intel_pch_thermal.c +++ b/drivers/thermal/intel/intel_pch_thermal.c @@ -371,16 +371,14 @@ static void intel_pch_thermal_remove(struct pci_dev *pdev) static int intel_pch_thermal_suspend(struct device *device) { - struct pci_dev *pdev = to_pci_dev(device); - struct pch_thermal_device *ptd = pci_get_drvdata(pdev); + struct pch_thermal_device *ptd = dev_get_drvdata(device); return ptd->ops->suspend(ptd); } static int intel_pch_thermal_resume(struct device *device) { - struct pci_dev *pdev = to_pci_dev(device); - struct pch_thermal_device *ptd = pci_get_drvdata(pdev); + struct pch_thermal_device *ptd = dev_get_drvdata(device); return ptd->ops->resume(ptd); } diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c index 8d9b721dadb6..e46a4e3f25c4 100644 --- a/drivers/thermal/qcom/tsens-8960.c +++ b/drivers/thermal/qcom/tsens-8960.c @@ -229,6 +229,8 @@ static int calibrate_8960(struct tsens_priv *priv) for (i = 0; i < num_read; i++, s++) s->offset = data[i]; + kfree(data); + return 0; } diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c index 6f26fadf4c27..055647bcee67 100644 --- a/drivers/thermal/qcom/tsens-v0_1.c +++ b/drivers/thermal/qcom/tsens-v0_1.c @@ -145,8 +145,10 @@ static int calibrate_8916(struct tsens_priv *priv) return PTR_ERR(qfprom_cdata); qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel"); - if (IS_ERR(qfprom_csel)) + if (IS_ERR(qfprom_csel)) { + kfree(qfprom_cdata); return PTR_ERR(qfprom_csel); + } mode = (qfprom_csel[0] & MSM8916_CAL_SEL_MASK) >> MSM8916_CAL_SEL_SHIFT; dev_dbg(priv->dev, "calibration mode is %d\n", mode); @@ -181,6 +183,8 @@ static int calibrate_8916(struct tsens_priv *priv) } compute_intercept_slope(priv, p1, p2, mode); + kfree(qfprom_cdata); + kfree(qfprom_csel); return 0; } @@ -198,8 +202,10 @@ static int calibrate_8974(struct tsens_priv *priv) return PTR_ERR(calib); bkp = (u32 *)qfprom_read(priv->dev, "calib_backup"); - if (IS_ERR(bkp)) + if (IS_ERR(bkp)) { + kfree(calib); return PTR_ERR(bkp); + } calib_redun_sel = bkp[1] & BKP_REDUN_SEL; calib_redun_sel >>= BKP_REDUN_SHIFT; @@ -313,6 +319,8 @@ static int calibrate_8974(struct tsens_priv *priv) } compute_intercept_slope(priv, p1, p2, mode); + kfree(calib); + kfree(bkp); return 0; } diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c index 10b595d4f619..870f502f2cb6 100644 --- a/drivers/thermal/qcom/tsens-v1.c +++ b/drivers/thermal/qcom/tsens-v1.c @@ -138,6 +138,7 @@ static int calibrate_v1(struct tsens_priv *priv) } compute_intercept_slope(priv, p1, p2, mode); + kfree(qfprom_cdata); return 0; } diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h index 2fd94997245b..b89083b61c38 100644 --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -17,6 +17,7 @@ #include <linux/thermal.h> #include <linux/regmap.h> +#include <linux/slab.h> struct tsens_priv; diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c index 7b364933bfb1..39542c670301 100644 --- a/drivers/thermal/qoriq_thermal.c +++ b/drivers/thermal/qoriq_thermal.c @@ -2,6 +2,7 @@ // // Copyright 2016 Freescale Semiconductor, Inc. +#include <linux/clk.h> #include <linux/module.h> #include <linux/platform_device.h> #include <linux/err.h> @@ -72,6 +73,7 @@ struct qoriq_sensor { struct qoriq_tmu_data { struct qoriq_tmu_regs __iomem *regs; + struct clk *clk; bool little_endian; struct qoriq_sensor *sensor[SITES_MAX]; }; @@ -202,32 +204,39 @@ static int qoriq_tmu_probe(struct platform_device *pdev) data->little_endian = of_property_read_bool(np, "little-endian"); - data->regs = of_iomap(np, 0); - if (!data->regs) { + data->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(data->regs)) { dev_err(&pdev->dev, "Failed to get memory region\n"); - ret = -ENODEV; - goto err_iomap; + return PTR_ERR(data->regs); + } + + data->clk = devm_clk_get_optional(&pdev->dev, NULL); + if (IS_ERR(data->clk)) + return PTR_ERR(data->clk); + + ret = clk_prepare_enable(data->clk); + if (ret) { + dev_err(&pdev->dev, "Failed to enable clock\n"); + return ret; } qoriq_tmu_init_device(data); /* TMU initialization */ ret = qoriq_tmu_calibration(pdev); /* TMU calibration */ if (ret < 0) - goto err_tmu; + goto err; ret = qoriq_tmu_register_tmu_zone(pdev); if (ret < 0) { dev_err(&pdev->dev, "Failed to register sensors\n"); ret = -ENODEV; - goto err_iomap; + goto err; } return 0; -err_tmu: - iounmap(data->regs); - -err_iomap: +err: + clk_disable_unprepare(data->clk); platform_set_drvdata(pdev, NULL); return ret; @@ -240,14 +249,14 @@ static int qoriq_tmu_remove(struct platform_device *pdev) /* Disable monitoring */ tmu_write(data, TMR_DISABLE, &data->regs->tmr); - iounmap(data->regs); + clk_disable_unprepare(data->clk); + platform_set_drvdata(pdev, NULL); return 0; } -#ifdef CONFIG_PM_SLEEP -static int qoriq_tmu_suspend(struct device *dev) +static int __maybe_unused qoriq_tmu_suspend(struct device *dev) { u32 tmr; struct qoriq_tmu_data *data = dev_get_drvdata(dev); @@ -257,14 +266,21 @@ static int qoriq_tmu_suspend(struct device *dev) tmr &= ~TMR_ME; tmu_write(data, tmr, &data->regs->tmr); + clk_disable_unprepare(data->clk); + return 0; } -static int qoriq_tmu_resume(struct device *dev) +static int __maybe_unused qoriq_tmu_resume(struct device *dev) { u32 tmr; + int ret; struct qoriq_tmu_data *data = dev_get_drvdata(dev); + ret = clk_prepare_enable(data->clk); + if (ret) + return ret; + /* Enable monitoring */ tmr = tmu_read(data, &data->regs->tmr); tmr |= TMR_ME; @@ -272,7 +288,6 @@ static int qoriq_tmu_resume(struct device *dev) return 0; } -#endif static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops, qoriq_tmu_suspend, qoriq_tmu_resume); diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c index a56463308694..755d2b5bd2c2 100644 --- a/drivers/thermal/rcar_gen3_thermal.c +++ b/drivers/thermal/rcar_gen3_thermal.c @@ -443,9 +443,8 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev) if (ret) goto error_unregister; - ret = devm_add_action(dev, rcar_gen3_hwmon_action, zone); + ret = devm_add_action_or_reset(dev, rcar_gen3_hwmon_action, zone); if (ret) { - rcar_gen3_hwmon_action(zone); goto error_unregister; } diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c index 43941eb734eb..5acaad3a594f 100644 --- a/drivers/thermal/tegra/soctherm.c +++ b/drivers/thermal/tegra/soctherm.c @@ -202,7 +202,7 @@ /* get dividend from the depth */ #define THROT_DEPTH_DIVIDEND(depth) ((256 * (100 - (depth)) / 100) - 1) -/* gk20a nv_therm interface N:3 Mapping. Levels defined in tegra124-sochterm.h +/* gk20a nv_therm interface N:3 Mapping. Levels defined in tegra124-soctherm.h * level vector * NONE 3'b000 * LOW 3'b001 diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 6bab66e84eb5..d4481cc8958f 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -304,7 +304,7 @@ static void thermal_zone_device_set_polling(struct thermal_zone_device *tz, &tz->poll_queue, msecs_to_jiffies(delay)); else - cancel_delayed_work(&tz->poll_queue); + cancel_delayed_work_sync(&tz->poll_queue); } static void monitor_thermal_zone(struct thermal_zone_device *tz) @@ -985,7 +985,7 @@ __thermal_cooling_device_register(struct device_node *np, result = device_register(&cdev->device); if (result) { ida_simple_remove(&thermal_cdev_ida, cdev->id); - kfree(cdev); + put_device(&cdev->device); return ERR_PTR(result); } @@ -1240,21 +1240,31 @@ thermal_zone_device_register(const char *type, int trips, int mask, struct thermal_zone_device *tz; enum thermal_trip_type trip_type; int trip_temp; + int id; int result; int count; struct thermal_governor *governor; - if (!type || strlen(type) == 0) + if (!type || strlen(type) == 0) { + pr_err("Error: No thermal zone type defined\n"); return ERR_PTR(-EINVAL); + } - if (type && strlen(type) >= THERMAL_NAME_LENGTH) + if (type && strlen(type) >= THERMAL_NAME_LENGTH) { + pr_err("Error: Thermal zone name (%s) too long, should be under %d chars\n", + type, THERMAL_NAME_LENGTH); return ERR_PTR(-EINVAL); + } - if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips) + if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips) { + pr_err("Error: Incorrect number of thermal trips\n"); return ERR_PTR(-EINVAL); + } - if (!ops) + if (!ops) { + pr_err("Error: Thermal zone device ops not defined\n"); return ERR_PTR(-EINVAL); + } if (trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp)) return ERR_PTR(-EINVAL); @@ -1266,11 +1276,13 @@ thermal_zone_device_register(const char *type, int trips, int mask, INIT_LIST_HEAD(&tz->thermal_instances); ida_init(&tz->ida); mutex_init(&tz->lock); - result = ida_simple_get(&thermal_tz_ida, 0, 0, GFP_KERNEL); - if (result < 0) + id = ida_simple_get(&thermal_tz_ida, 0, 0, GFP_KERNEL); + if (id < 0) { + result = id; goto free_tz; + } - tz->id = result; + tz->id = id; strlcpy(tz->type, type, sizeof(tz->type)); tz->ops = ops; tz->tzp = tzp; @@ -1292,7 +1304,7 @@ thermal_zone_device_register(const char *type, int trips, int mask, dev_set_name(&tz->device, "thermal_zone%d", tz->id); result = device_register(&tz->device); if (result) - goto remove_device_groups; + goto release_device; for (count = 0; count < trips; count++) { if (tz->ops->get_trip_type(tz, count, &trip_type)) @@ -1343,14 +1355,12 @@ thermal_zone_device_register(const char *type, int trips, int mask, return tz; unregister: - ida_simple_remove(&thermal_tz_ida, tz->id); - device_unregister(&tz->device); - return ERR_PTR(result); - -remove_device_groups: - thermal_zone_destroy_device_groups(tz); + device_del(&tz->device); +release_device: + put_device(&tz->device); + tz = NULL; remove_id: - ida_simple_remove(&thermal_tz_ida, tz->id); + ida_simple_remove(&thermal_tz_ida, id); free_tz: kfree(tz); return ERR_PTR(result); diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c index 40c69a533b24..dd5d8ee37928 100644 --- a/drivers/thermal/thermal_hwmon.c +++ b/drivers/thermal/thermal_hwmon.c @@ -87,13 +87,17 @@ static struct thermal_hwmon_device * thermal_hwmon_lookup_by_type(const struct thermal_zone_device *tz) { struct thermal_hwmon_device *hwmon; + char type[THERMAL_NAME_LENGTH]; mutex_lock(&thermal_hwmon_list_lock); - list_for_each_entry(hwmon, &thermal_hwmon_list, node) - if (!strcmp(hwmon->type, tz->type)) { + list_for_each_entry(hwmon, &thermal_hwmon_list, node) { + strcpy(type, tz->type); + strreplace(type, '-', '_'); + if (!strcmp(hwmon->type, type)) { mutex_unlock(&thermal_hwmon_list_lock); return hwmon; } + } mutex_unlock(&thermal_hwmon_list_lock); return NULL; diff --git a/drivers/thermal/thermal_mmio.c b/drivers/thermal/thermal_mmio.c index de3cceea23bc..40524fa13533 100644 --- a/drivers/thermal/thermal_mmio.c +++ b/drivers/thermal/thermal_mmio.c @@ -53,13 +53,6 @@ static int thermal_mmio_probe(struct platform_device *pdev) return -ENOMEM; resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (IS_ERR(resource)) { - dev_err(&pdev->dev, - "fail to get platform memory resource (%ld)\n", - PTR_ERR(resource)); - return PTR_ERR(resource); - } - sensor->mmio_base = devm_ioremap_resource(&pdev->dev, resource); if (IS_ERR(sensor->mmio_base)) { dev_err(&pdev->dev, "failed to ioremap memory (%ld)\n", |