summaryrefslogtreecommitdiff
path: root/drivers/tty/n_gsm.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/n_gsm.c')
-rw-r--r--drivers/tty/n_gsm.c402
1 files changed, 378 insertions, 24 deletions
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index b6e0cc4571ea..daf12132deb1 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -38,8 +38,10 @@
#include <linux/sched/signal.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
+#include <linux/bitfield.h>
#include <linux/ctype.h>
#include <linux/mm.h>
+#include <linux/math.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/poll.h>
@@ -75,7 +77,12 @@ module_param(debug, int, 0600);
#define T1 10 /* 100mS */
#define T2 34 /* 333mS */
+#define T3 10 /* 10s */
#define N2 3 /* Retry 3 times */
+#define K 2 /* outstanding I frames */
+
+#define MAX_T3 255 /* In seconds. */
+#define MAX_WINDOW_SIZE 7 /* Limit of K in error recovery mode. */
/* Use long timers for testing at low speed with debug on */
#ifdef DEBUG_TIMING
@@ -89,6 +96,7 @@ module_param(debug, int, 0600);
*/
#define MAX_MRU 1500
#define MAX_MTU 1500
+#define MIN_MTU (PROT_OVERHEAD + 1)
/* SOF, ADDR, CTRL, LEN1, LEN2, ..., FCS, EOF */
#define PROT_OVERHEAD 7
#define GSM_NET_TX_TIMEOUT (HZ*10)
@@ -120,6 +128,7 @@ struct gsm_msg {
enum gsm_dlci_state {
DLCI_CLOSED,
+ DLCI_CONFIGURE, /* Sending PN (for adaption > 1) */
DLCI_OPENING, /* Sending SABM not seen UA */
DLCI_OPEN, /* SABM/UA complete */
DLCI_CLOSING, /* Sending DISC not seen UA/DM */
@@ -159,7 +168,12 @@ struct gsm_dlci {
int prev_adaption;
u32 modem_rx; /* Our incoming virtual modem lines */
u32 modem_tx; /* Our outgoing modem lines */
+ unsigned int mtu;
bool dead; /* Refuse re-open */
+ /* Configuration */
+ u8 prio; /* Priority */
+ u8 ftype; /* Frame type */
+ u8 k; /* Window size */
/* Flow control */
bool throttled; /* Private copy of throttle state */
bool constipated; /* Throttle status for outgoing */
@@ -172,6 +186,32 @@ struct gsm_dlci {
struct net_device *net; /* network interface, if created */
};
+/*
+ * Parameter bits used for parameter negotiation according to 3GPP 27.010
+ * chapter 5.4.6.3.1.
+ */
+
+struct gsm_dlci_param_bits {
+ u8 d_bits;
+ u8 i_cl_bits;
+ u8 p_bits;
+ u8 t_bits;
+ __le16 n_bits;
+ u8 na_bits;
+ u8 k_bits;
+};
+
+static_assert(sizeof(struct gsm_dlci_param_bits) == 8);
+
+#define PN_D_FIELD_DLCI GENMASK(5, 0)
+#define PN_I_CL_FIELD_FTYPE GENMASK(3, 0)
+#define PN_I_CL_FIELD_ADAPTION GENMASK(7, 4)
+#define PN_P_FIELD_PRIO GENMASK(5, 0)
+#define PN_T_FIELD_T1 GENMASK(7, 0)
+#define PN_N_FIELD_N1 GENMASK(15, 0)
+#define PN_NA_FIELD_N2 GENMASK(7, 0)
+#define PN_K_FIELD_K GENMASK(2, 0)
+
/* Total number of supported devices */
#define GSM_TTY_MINORS 256
@@ -282,7 +322,9 @@ struct gsm_mux {
int adaption; /* 1 or 2 supported */
u8 ftype; /* UI or UIH */
int t1, t2; /* Timers in 1/100th of a sec */
+ unsigned int t3; /* Power wake-up timer in seconds. */
int n2; /* Retry count */
+ u8 k; /* Window size */
/* Statistics (not currently exposed) */
unsigned long bad_fcs;
@@ -397,6 +439,7 @@ static const u8 gsm_fcs8[256] = {
#define INIT_FCS 0xFF
#define GOOD_FCS 0xCF
+static void gsm_dlci_close(struct gsm_dlci *dlci);
static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len);
static int gsm_modem_update(struct gsm_dlci *dlci, u8 brk);
static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,
@@ -520,6 +563,57 @@ static void gsm_hex_dump_bytes(const char *fname, const u8 *data,
}
/**
+ * gsm_encode_params - encode DLCI parameters
+ * @dlci: DLCI to encode from
+ * @params: buffer to fill with the encoded parameters
+ *
+ * Encodes the parameters according to GSM 07.10 section 5.4.6.3.1
+ * table 3.
+ */
+static int gsm_encode_params(const struct gsm_dlci *dlci,
+ struct gsm_dlci_param_bits *params)
+{
+ const struct gsm_mux *gsm = dlci->gsm;
+ unsigned int i, cl;
+
+ switch (dlci->ftype) {
+ case UIH:
+ i = 0; /* UIH */
+ break;
+ case UI:
+ i = 1; /* UI */
+ break;
+ default:
+ pr_debug("unsupported frame type %d\n", dlci->ftype);
+ return -EINVAL;
+ }
+
+ switch (dlci->adaption) {
+ case 1: /* Unstructured */
+ cl = 0; /* convergence layer type 1 */
+ break;
+ case 2: /* Unstructured with modem bits. */
+ cl = 1; /* convergence layer type 2 */
+ break;
+ default:
+ pr_debug("unsupported adaption %d\n", dlci->adaption);
+ return -EINVAL;
+ }
+
+ params->d_bits = FIELD_PREP(PN_D_FIELD_DLCI, dlci->addr);
+ /* UIH, convergence layer type 1 */
+ params->i_cl_bits = FIELD_PREP(PN_I_CL_FIELD_FTYPE, i) |
+ FIELD_PREP(PN_I_CL_FIELD_ADAPTION, cl);
+ params->p_bits = FIELD_PREP(PN_P_FIELD_PRIO, dlci->prio);
+ params->t_bits = FIELD_PREP(PN_T_FIELD_T1, gsm->t1);
+ params->n_bits = cpu_to_le16(FIELD_PREP(PN_N_FIELD_N1, dlci->mtu));
+ params->na_bits = FIELD_PREP(PN_NA_FIELD_N2, gsm->n2);
+ params->k_bits = FIELD_PREP(PN_K_FIELD_K, dlci->k);
+
+ return 0;
+}
+
+/**
* gsm_register_devices - register all tty devices for a given mux index
*
* @driver: the tty driver that describes the tty devices
@@ -1076,12 +1170,12 @@ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci)
return 0;
/* MTU/MRU count only the data bits but watch adaption mode */
- if ((len + h) > gsm->mtu)
- len = gsm->mtu - h;
+ if ((len + h) > dlci->mtu)
+ len = dlci->mtu - h;
size = len + h;
- msg = gsm_data_alloc(gsm, dlci->addr, size, gsm->ftype);
+ msg = gsm_data_alloc(gsm, dlci->addr, size, dlci->ftype);
if (!msg)
return -ENOMEM;
dp = msg->data;
@@ -1145,19 +1239,19 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
len = dlci->skb->len + overhead;
/* MTU/MRU count only the data bits */
- if (len > gsm->mtu) {
+ if (len > dlci->mtu) {
if (dlci->adaption == 3) {
/* Over long frame, bin it */
dev_kfree_skb_any(dlci->skb);
dlci->skb = NULL;
return 0;
}
- len = gsm->mtu;
+ len = dlci->mtu;
} else
last = 1;
size = len + overhead;
- msg = gsm_data_alloc(gsm, dlci->addr, size, gsm->ftype);
+ msg = gsm_data_alloc(gsm, dlci->addr, size, dlci->ftype);
if (msg == NULL) {
skb_queue_tail(&dlci->skb_list, dlci->skb);
dlci->skb = NULL;
@@ -1214,7 +1308,7 @@ static int gsm_dlci_modem_output(struct gsm_mux *gsm, struct gsm_dlci *dlci,
return -EINVAL;
}
- msg = gsm_data_alloc(gsm, dlci->addr, size, gsm->ftype);
+ msg = gsm_data_alloc(gsm, dlci->addr, size, dlci->ftype);
if (!msg) {
pr_err("%s: gsm_data_alloc error", __func__);
return -ENOMEM;
@@ -1287,7 +1381,7 @@ static int gsm_dlci_data_sweep(struct gsm_mux *gsm)
}
if (!sent)
break;
- };
+ }
return ret;
}
@@ -1340,8 +1434,9 @@ static void gsm_dlci_data_kick(struct gsm_dlci *dlci)
static int gsm_control_command(struct gsm_mux *gsm, int cmd, const u8 *data,
int dlen)
{
- struct gsm_msg *msg = gsm_data_alloc(gsm, 0, dlen + 2, gsm->ftype);
+ struct gsm_msg *msg;
+ msg = gsm_data_alloc(gsm, 0, dlen + 2, gsm->dlci[0]->ftype);
if (msg == NULL)
return -ENOMEM;
@@ -1367,7 +1462,8 @@ static void gsm_control_reply(struct gsm_mux *gsm, int cmd, const u8 *data,
int dlen)
{
struct gsm_msg *msg;
- msg = gsm_data_alloc(gsm, 0, dlen + 2, gsm->ftype);
+
+ msg = gsm_data_alloc(gsm, 0, dlen + 2, gsm->dlci[0]->ftype);
if (msg == NULL)
return;
msg->data[0] = (cmd & 0xFE) << 1 | EA; /* Clear C/R */
@@ -1438,6 +1534,116 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
}
/**
+ * gsm_process_negotiation - process received parameters
+ * @gsm: GSM channel
+ * @addr: DLCI address
+ * @cr: command/response
+ * @params: encoded parameters from the parameter negotiation message
+ *
+ * Used when the response for our parameter negotiation command was
+ * received.
+ */
+static int gsm_process_negotiation(struct gsm_mux *gsm, unsigned int addr,
+ unsigned int cr,
+ const struct gsm_dlci_param_bits *params)
+{
+ struct gsm_dlci *dlci = gsm->dlci[addr];
+ unsigned int ftype, i, adaption, prio, n1, k;
+
+ i = FIELD_GET(PN_I_CL_FIELD_FTYPE, params->i_cl_bits);
+ adaption = FIELD_GET(PN_I_CL_FIELD_ADAPTION, params->i_cl_bits) + 1;
+ prio = FIELD_GET(PN_P_FIELD_PRIO, params->p_bits);
+ n1 = FIELD_GET(PN_N_FIELD_N1, get_unaligned_le16(&params->n_bits));
+ k = FIELD_GET(PN_K_FIELD_K, params->k_bits);
+
+ if (n1 < MIN_MTU) {
+ if (debug & DBG_ERRORS)
+ pr_info("%s N1 out of range in PN\n", __func__);
+ return -EINVAL;
+ }
+
+ switch (i) {
+ case 0x00:
+ ftype = UIH;
+ break;
+ case 0x01:
+ ftype = UI;
+ break;
+ case 0x02: /* I frames are not supported */
+ if (debug & DBG_ERRORS)
+ pr_info("%s unsupported I frame request in PN\n",
+ __func__);
+ return -EINVAL;
+ default:
+ if (debug & DBG_ERRORS)
+ pr_info("%s i out of range in PN\n", __func__);
+ return -EINVAL;
+ }
+
+ if (!cr && gsm->initiator) {
+ if (adaption != dlci->adaption) {
+ if (debug & DBG_ERRORS)
+ pr_info("%s invalid adaption %d in PN\n",
+ __func__, adaption);
+ return -EINVAL;
+ }
+ if (prio != dlci->prio) {
+ if (debug & DBG_ERRORS)
+ pr_info("%s invalid priority %d in PN",
+ __func__, prio);
+ return -EINVAL;
+ }
+ if (n1 > gsm->mru || n1 > dlci->mtu) {
+ /* We requested a frame size but the other party wants
+ * to send larger frames. The standard allows only a
+ * smaller response value than requested (5.4.6.3.1).
+ */
+ if (debug & DBG_ERRORS)
+ pr_info("%s invalid N1 %d in PN\n", __func__,
+ n1);
+ return -EINVAL;
+ }
+ dlci->mtu = n1;
+ if (ftype != dlci->ftype) {
+ if (debug & DBG_ERRORS)
+ pr_info("%s invalid i %d in PN\n", __func__, i);
+ return -EINVAL;
+ }
+ if (ftype != UI && ftype != UIH && k > dlci->k) {
+ if (debug & DBG_ERRORS)
+ pr_info("%s invalid k %d in PN\n", __func__, k);
+ return -EINVAL;
+ }
+ dlci->k = k;
+ } else if (cr && !gsm->initiator) {
+ /* Only convergence layer type 1 and 2 are supported. */
+ if (adaption != 1 && adaption != 2) {
+ if (debug & DBG_ERRORS)
+ pr_info("%s invalid adaption %d in PN\n",
+ __func__, adaption);
+ return -EINVAL;
+ }
+ dlci->adaption = adaption;
+ if (n1 > gsm->mru) {
+ /* Propose a smaller value */
+ dlci->mtu = gsm->mru;
+ } else if (n1 > MAX_MTU) {
+ /* Propose a smaller value */
+ dlci->mtu = MAX_MTU;
+ } else {
+ dlci->mtu = n1;
+ }
+ dlci->prio = prio;
+ dlci->ftype = ftype;
+ dlci->k = k;
+ } else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
* gsm_control_modem - modem status received
* @gsm: GSM channel
* @data: data following command
@@ -1491,6 +1697,65 @@ static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen)
}
/**
+ * gsm_control_negotiation - parameter negotiation received
+ * @gsm: GSM channel
+ * @cr: command/response flag
+ * @data: data following command
+ * @dlen: data length
+ *
+ * We have received a parameter negotiation message. This is used by
+ * the GSM mux protocol to configure protocol parameters for a new DLCI.
+ */
+static void gsm_control_negotiation(struct gsm_mux *gsm, unsigned int cr,
+ const u8 *data, unsigned int dlen)
+{
+ unsigned int addr;
+ struct gsm_dlci_param_bits pn_reply;
+ struct gsm_dlci *dlci;
+ struct gsm_dlci_param_bits *params;
+
+ if (dlen < sizeof(struct gsm_dlci_param_bits))
+ return;
+
+ /* Invalid DLCI? */
+ params = (struct gsm_dlci_param_bits *)data;
+ addr = FIELD_GET(PN_D_FIELD_DLCI, params->d_bits);
+ if (addr == 0 || addr >= NUM_DLCI || !gsm->dlci[addr])
+ return;
+ dlci = gsm->dlci[addr];
+
+ /* Too late for parameter negotiation? */
+ if ((!cr && dlci->state == DLCI_OPENING) || dlci->state == DLCI_OPEN)
+ return;
+
+ /* Process the received parameters */
+ if (gsm_process_negotiation(gsm, addr, cr, params) != 0) {
+ /* Negotiation failed. Close the link. */
+ if (debug & DBG_ERRORS)
+ pr_info("%s PN failed\n", __func__);
+ gsm_dlci_close(dlci);
+ return;
+ }
+
+ if (cr) {
+ /* Reply command with accepted parameters. */
+ if (gsm_encode_params(dlci, &pn_reply) == 0)
+ gsm_control_reply(gsm, CMD_PN, (const u8 *)&pn_reply,
+ sizeof(pn_reply));
+ else if (debug & DBG_ERRORS)
+ pr_info("%s PN invalid\n", __func__);
+ } else if (dlci->state == DLCI_CONFIGURE) {
+ /* Proceed with link setup by sending SABM before UA */
+ dlci->state = DLCI_OPENING;
+ gsm_command(gsm, dlci->addr, SABM|PF);
+ mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
+ } else {
+ if (debug & DBG_ERRORS)
+ pr_info("%s PN in invalid state\n", __func__);
+ }
+}
+
+/**
* gsm_control_rls - remote line status
* @gsm: GSM channel
* @data: data bytes
@@ -1599,8 +1864,12 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
/* Modem wishes to enter power saving state */
gsm_control_reply(gsm, CMD_PSC, NULL, 0);
break;
+ /* Optional commands */
+ case CMD_PN:
+ /* Modem sends a parameter negotiation command */
+ gsm_control_negotiation(gsm, 1, data, clen);
+ break;
/* Optional unsupported commands */
- case CMD_PN: /* Parameter negotiation */
case CMD_RPN: /* Remote port negotiation */
case CMD_SNC: /* Service negotiation command */
default:
@@ -1633,8 +1902,8 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
spin_lock_irqsave(&gsm->control_lock, flags);
ctrl = gsm->pending_cmd;
- /* Does the reply match our command */
command |= 1;
+ /* Does the reply match our command */
if (ctrl != NULL && (command == ctrl->cmd || command == CMD_NSC)) {
/* Our command was replied to, kill the retry timer */
del_timer(&gsm->t2_timer);
@@ -1644,6 +1913,9 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
ctrl->error = -EOPNOTSUPP;
ctrl->done = 1;
wake_up(&gsm->event);
+ /* Or did we receive the PN response to our PN command */
+ } else if (command == CMD_PN) {
+ gsm_control_negotiation(gsm, 0, data, clen);
}
spin_unlock_irqrestore(&gsm->control_lock, flags);
}
@@ -1822,6 +2094,32 @@ static void gsm_dlci_open(struct gsm_dlci *dlci)
}
/**
+ * gsm_dlci_negotiate - start parameter negotiation
+ * @dlci: DLCI to open
+ *
+ * Starts the parameter negotiation for the new DLCI. This needs to be done
+ * before the DLCI initialized the channel via SABM.
+ */
+static int gsm_dlci_negotiate(struct gsm_dlci *dlci)
+{
+ struct gsm_mux *gsm = dlci->gsm;
+ struct gsm_dlci_param_bits params;
+ int ret;
+
+ ret = gsm_encode_params(dlci, &params);
+ if (ret != 0)
+ return ret;
+
+ /* We cannot asynchronous wait for the command response with
+ * gsm_command() and gsm_control_wait() at this point.
+ */
+ ret = gsm_control_command(gsm, CMD_PN, (const u8 *)&params,
+ sizeof(params));
+
+ return ret;
+}
+
+/**
* gsm_dlci_t1 - T1 timer expiry
* @t: timer contained in the DLCI that opened
*
@@ -1842,6 +2140,14 @@ static void gsm_dlci_t1(struct timer_list *t)
struct gsm_mux *gsm = dlci->gsm;
switch (dlci->state) {
+ case DLCI_CONFIGURE:
+ if (dlci->retries && gsm_dlci_negotiate(dlci) == 0) {
+ dlci->retries--;
+ mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
+ } else {
+ gsm_dlci_begin_close(dlci); /* prevent half open link */
+ }
+ break;
case DLCI_OPENING:
if (dlci->retries) {
dlci->retries--;
@@ -1880,17 +2186,46 @@ static void gsm_dlci_t1(struct timer_list *t)
* to the modem which should then reply with a UA or ADM, at which point
* we will move into open state. Opening is done asynchronously with retry
* running off timers and the responses.
+ * Parameter negotiation is performed before SABM if required.
*/
static void gsm_dlci_begin_open(struct gsm_dlci *dlci)
{
- struct gsm_mux *gsm = dlci->gsm;
- if (dlci->state == DLCI_OPEN || dlci->state == DLCI_OPENING)
+ struct gsm_mux *gsm = dlci ? dlci->gsm : NULL;
+ bool need_pn = false;
+
+ if (!gsm)
return;
- dlci->retries = gsm->n2;
- dlci->state = DLCI_OPENING;
- gsm_command(dlci->gsm, dlci->addr, SABM|PF);
- mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
+
+ if (dlci->addr != 0) {
+ if (gsm->adaption != 1 || gsm->adaption != dlci->adaption)
+ need_pn = true;
+ if (dlci->prio != (roundup(dlci->addr + 1, 8) - 1))
+ need_pn = true;
+ if (gsm->ftype != dlci->ftype)
+ need_pn = true;
+ }
+
+ switch (dlci->state) {
+ case DLCI_CLOSED:
+ case DLCI_CLOSING:
+ dlci->retries = gsm->n2;
+ if (!need_pn) {
+ dlci->state = DLCI_OPENING;
+ gsm_command(gsm, dlci->addr, SABM|PF);
+ } else {
+ /* Configure DLCI before setup */
+ dlci->state = DLCI_CONFIGURE;
+ if (gsm_dlci_negotiate(dlci) != 0) {
+ gsm_dlci_close(dlci);
+ return;
+ }
+ }
+ mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
+ break;
+ default:
+ break;
+ }
}
/**
@@ -2078,6 +2413,13 @@ static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr)
dlci->gsm = gsm;
dlci->addr = addr;
dlci->adaption = gsm->adaption;
+ dlci->mtu = gsm->mtu;
+ if (addr == 0)
+ dlci->prio = 0;
+ else
+ dlci->prio = roundup(addr + 1, 8) - 1;
+ dlci->ftype = gsm->ftype;
+ dlci->k = gsm->k;
dlci->state = DLCI_CLOSED;
if (addr) {
dlci->data = gsm_dlci_data;
@@ -2652,7 +2994,9 @@ static struct gsm_mux *gsm_alloc_mux(void)
gsm->t1 = T1;
gsm->t2 = T2;
+ gsm->t3 = T3;
gsm->n2 = N2;
+ gsm->k = K;
gsm->ftype = UIH;
gsm->adaption = 1;
gsm->encoding = GSM_ADV_OPT;
@@ -2692,7 +3036,7 @@ static void gsm_copy_config_values(struct gsm_mux *gsm,
c->initiator = gsm->initiator;
c->t1 = gsm->t1;
c->t2 = gsm->t2;
- c->t3 = 0; /* Not supported */
+ c->t3 = gsm->t3;
c->n2 = gsm->n2;
if (gsm->ftype == UIH)
c->i = 1;
@@ -2701,7 +3045,7 @@ static void gsm_copy_config_values(struct gsm_mux *gsm,
pr_debug("Ftype %d i %d\n", gsm->ftype, c->i);
c->mru = gsm->mru;
c->mtu = gsm->mtu;
- c->k = 0;
+ c->k = gsm->k;
}
static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
@@ -2714,7 +3058,11 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
if ((c->adaption != 1 && c->adaption != 2) || c->k)
return -EOPNOTSUPP;
/* Check the MRU/MTU range looks sane */
- if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
+ if (c->mru < MIN_MTU || c->mtu < MIN_MTU)
+ return -EINVAL;
+ if (c->mru > MAX_MRU || c->mtu > MAX_MTU)
+ return -EINVAL;
+ if (c->t3 > MAX_T3)
return -EINVAL;
if (c->n2 > 255)
return -EINVAL;
@@ -2722,6 +3070,8 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
return -EINVAL;
if (c->initiator > 1)
return -EINVAL;
+ if (c->k > MAX_WINDOW_SIZE)
+ return -EINVAL;
if (c->i == 0 || c->i > 2) /* UIH and UI only */
return -EINVAL;
/*
@@ -2769,6 +3119,10 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
gsm->t1 = c->t1;
if (c->t2)
gsm->t2 = c->t2;
+ if (c->t3)
+ gsm->t3 = c->t3;
+ if (c->k)
+ gsm->k = c->k;
/*
* FIXME: We need to separate activation/deactivation from adding
@@ -3299,9 +3653,9 @@ static int gsm_create_network(struct gsm_dlci *dlci, struct gsm_netconfig *nc)
pr_err("alloc_netdev failed\n");
return -ENOMEM;
}
- net->mtu = dlci->gsm->mtu;
- net->min_mtu = 8;
- net->max_mtu = dlci->gsm->mtu;
+ net->mtu = dlci->mtu;
+ net->min_mtu = MIN_MTU;
+ net->max_mtu = dlci->mtu;
mux_net = netdev_priv(net);
mux_net->dlci = dlci;
kref_init(&mux_net->ref);
generated by cgit (git 2.34.1) at 2024-06-14 20:24:30 +0000