summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/8250/8250.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/8250/8250.c')
-rw-r--r--drivers/tty/serial/8250/8250.c132
1 files changed, 49 insertions, 83 deletions
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index f9320437a649..0efc815a4968 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -239,13 +239,6 @@ static const struct serial8250_config uart_config[] = {
.fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
.flags = UART_CAP_FIFO | UART_CAP_UUE | UART_CAP_RTOIE,
},
- [PORT_RM9000] = {
- .name = "RM9000",
- .fifo_size = 16,
- .tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO,
- },
[PORT_OCTEON] = {
.name = "OCTEON",
.fifo_size = 64,
@@ -324,9 +317,9 @@ static void default_serial_dl_write(struct uart_8250_port *up, int value)
serial_out(up, UART_DLM, value >> 8 & 0xff);
}
-#ifdef CONFIG_MIPS_ALCHEMY
+#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
-/* Au1x00 UART hardware has a weird register layout */
+/* Au1x00/RT288x UART hardware has a weird register layout */
static const u8 au_io_in_map[] = {
[UART_RX] = 0,
[UART_IER] = 2,
@@ -370,56 +363,6 @@ static void au_serial_dl_write(struct uart_8250_port *up, int value)
#endif
-#ifdef CONFIG_SERIAL_8250_RM9K
-
-static const u8
- regmap_in[8] = {
- [UART_RX] = 0x00,
- [UART_IER] = 0x0c,
- [UART_IIR] = 0x14,
- [UART_LCR] = 0x1c,
- [UART_MCR] = 0x20,
- [UART_LSR] = 0x24,
- [UART_MSR] = 0x28,
- [UART_SCR] = 0x2c
- },
- regmap_out[8] = {
- [UART_TX] = 0x04,
- [UART_IER] = 0x0c,
- [UART_FCR] = 0x18,
- [UART_LCR] = 0x1c,
- [UART_MCR] = 0x20,
- [UART_LSR] = 0x24,
- [UART_MSR] = 0x28,
- [UART_SCR] = 0x2c
- };
-
-static unsigned int rm9k_serial_in(struct uart_port *p, int offset)
-{
- offset = regmap_in[offset] << p->regshift;
- return readl(p->membase + offset);
-}
-
-static void rm9k_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = regmap_out[offset] << p->regshift;
- writel(value, p->membase + offset);
-}
-
-static int rm9k_serial_dl_read(struct uart_8250_port *up)
-{
- return ((__raw_readl(up->port.membase + 0x10) << 8) |
- (__raw_readl(up->port.membase + 0x08) & 0xff)) & 0xffff;
-}
-
-static void rm9k_serial_dl_write(struct uart_8250_port *up, int value)
-{
- __raw_writel(value, up->port.membase + 0x08);
- __raw_writel(value >> 8, up->port.membase + 0x10);
-}
-
-#endif
-
static unsigned int hub6_serial_in(struct uart_port *p, int offset)
{
offset = offset << p->regshift;
@@ -497,16 +440,7 @@ static void set_io_from_upio(struct uart_port *p)
p->serial_out = mem32_serial_out;
break;
-#ifdef CONFIG_SERIAL_8250_RM9K
- case UPIO_RM9000:
- p->serial_in = rm9k_serial_in;
- p->serial_out = rm9k_serial_out;
- up->dl_read = rm9k_serial_dl_read;
- up->dl_write = rm9k_serial_dl_write;
- break;
-#endif
-
-#ifdef CONFIG_MIPS_ALCHEMY
+#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
case UPIO_AU:
p->serial_in = au_serial_in;
p->serial_out = au_serial_out;
@@ -1341,7 +1275,9 @@ static void serial8250_start_tx(struct uart_port *port)
struct uart_8250_port *up =
container_of(port, struct uart_8250_port, port);
- if (!(up->ier & UART_IER_THRI)) {
+ if (up->dma && !serial8250_tx_dma(up)) {
+ return;
+ } else if (!(up->ier & UART_IER_THRI)) {
up->ier |= UART_IER_THRI;
serial_port_out(port, UART_IER, up->ier);
@@ -1349,9 +1285,7 @@ static void serial8250_start_tx(struct uart_port *port)
unsigned char lsr;
lsr = serial_in(up, UART_LSR);
up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
- if ((port->type == PORT_RM9000) ?
- (lsr & UART_LSR_THRE) :
- (lsr & UART_LSR_TEMT))
+ if (lsr & UART_LSR_TEMT)
serial8250_tx_chars(up);
}
}
@@ -1397,7 +1331,6 @@ unsigned char
serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
{
struct uart_port *port = &up->port;
- struct tty_struct *tty = port->state->port.tty;
unsigned char ch;
int max_count = 256;
char flag;
@@ -1462,7 +1395,7 @@ ignore_char:
lsr = serial_in(up, UART_LSR);
} while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
spin_unlock(&port->lock);
- tty_flip_buffer_push(tty);
+ tty_flip_buffer_push(&port->state->port);
spin_lock(&port->lock);
return lsr;
}
@@ -1547,6 +1480,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
unsigned long flags;
struct uart_8250_port *up =
container_of(port, struct uart_8250_port, port);
+ int dma_err = 0;
if (iir & UART_IIR_NO_INT)
return 0;
@@ -1557,8 +1491,13 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
DEBUG_INTR("status = %x...", status);
- if (status & (UART_LSR_DR | UART_LSR_BI))
- status = serial8250_rx_chars(up, status);
+ if (status & (UART_LSR_DR | UART_LSR_BI)) {
+ if (up->dma)
+ dma_err = serial8250_rx_dma(up, iir);
+
+ if (!up->dma || dma_err)
+ status = serial8250_rx_chars(up, status);
+ }
serial8250_modem_status(up);
if (status & UART_LSR_THRE)
serial8250_tx_chars(up);
@@ -1991,9 +1930,12 @@ static int serial8250_startup(struct uart_port *port)
if (port->type == PORT_8250_CIR)
return -ENODEV;
- port->fifosize = uart_config[up->port.type].fifo_size;
- up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
- up->capabilities = uart_config[up->port.type].flags;
+ if (!port->fifosize)
+ port->fifosize = uart_config[port->type].fifo_size;
+ if (!up->tx_loadsz)
+ up->tx_loadsz = uart_config[port->type].tx_loadsz;
+ if (!up->capabilities)
+ up->capabilities = uart_config[port->type].flags;
up->mcr = 0;
if (port->iotype != up->cur_iotype)
@@ -2198,6 +2140,18 @@ dont_test_tx_en:
up->msr_saved_flags = 0;
/*
+ * Request DMA channels for both RX and TX.
+ */
+ if (up->dma) {
+ retval = serial8250_request_dma(up);
+ if (retval) {
+ pr_warn_ratelimited("ttyS%d - failed to request DMA\n",
+ serial_index(port));
+ up->dma = NULL;
+ }
+ }
+
+ /*
* Finally, enable interrupts. Note: Modem status interrupts
* are set via set_termios(), which will be occurring imminently
* anyway, so we don't enable them here.
@@ -2230,6 +2184,9 @@ static void serial8250_shutdown(struct uart_port *port)
up->ier = 0;
serial_port_out(port, UART_IER, 0);
+ if (up->dma)
+ serial8250_release_dma(up);
+
spin_lock_irqsave(&port->lock, flags);
if (port->flags & UPF_FOURPORT) {
/* reset interrupts on the AST Fourport board */
@@ -2826,9 +2783,12 @@ static void
serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type)
{
up->port.type = type;
- up->port.fifosize = uart_config[type].fifo_size;
- up->capabilities = uart_config[type].flags;
- up->tx_loadsz = uart_config[type].tx_loadsz;
+ if (!up->port.fifosize)
+ up->port.fifosize = uart_config[type].fifo_size;
+ if (!up->tx_loadsz)
+ up->tx_loadsz = uart_config[type].tx_loadsz;
+ if (!up->capabilities)
+ up->capabilities = uart_config[type].flags;
}
static void __init
@@ -3262,6 +3222,10 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
uart->bugs = up->bugs;
uart->port.mapbase = up->port.mapbase;
uart->port.private_data = up->port.private_data;
+ uart->port.fifosize = up->port.fifosize;
+ uart->tx_loadsz = up->tx_loadsz;
+ uart->capabilities = up->capabilities;
+
if (up->port.dev)
uart->port.dev = up->port.dev;
@@ -3287,6 +3251,8 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
uart->dl_read = up->dl_read;
if (up->dl_write)
uart->dl_write = up->dl_write;
+ if (up->dma)
+ uart->dma = up->dma;
if (serial8250_isa_config != NULL)
serial8250_isa_config(0, &uart->port,
generated by cgit (git 2.34.1) at 2024-06-03 11:46:34 +0000