1 files changed, 6 insertions, 61 deletions

diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index f6687756ec5e..65e9045dafe6 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -7,7 +7,6 @@
 #include <linux/console.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/delay.h>
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
 #include <linux/of_address.h>
@@ -26,67 +25,16 @@ struct of_serial_info {
 	int line;
 };
 
-#ifdef CONFIG_ARCH_TEGRA
-static void tegra_serial_handle_break(struct uart_port *p)
-{
-	unsigned int status, tmout = 10000;
-
-	do {
-		status = p->serial_in(p, UART_LSR);
-		if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
-			status = p->serial_in(p, UART_RX);
-		else
-			break;
-		if (--tmout == 0)
-			break;
-		udelay(1);
-	} while (1);
-}
-#else
-static inline void tegra_serial_handle_break(struct uart_port *port)
-{
-}
-#endif
-
-static int of_8250_rs485_config(struct uart_port *port,
-				  struct serial_rs485 *rs485)
-{
-	struct uart_8250_port *up = up_to_u8250p(port);
-
-	/* Clamp the delays to [0, 100ms] */
-	rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U);
-	rs485->delay_rts_after_send  = min(rs485->delay_rts_after_send, 100U);
-
-	port->rs485 = *rs485;
-
-	/*
-	 * Both serial8250_em485_init and serial8250_em485_destroy
-	 * are idempotent
-	 */
-	if (rs485->flags & SER_RS485_ENABLED) {
-		int ret = serial8250_em485_init(up);
-
-		if (ret) {
-			rs485->flags &= ~SER_RS485_ENABLED;
-			port->rs485.flags &= ~SER_RS485_ENABLED;
-		}
-		return ret;
-	}
-
-	serial8250_em485_destroy(up);
-
-	return 0;
-}
-
 /*
  * Fill a struct uart_port for a given device node
  */
 static int of_platform_serial_setup(struct platform_device *ofdev,
-			int type, struct uart_port *port,
+			int type, struct uart_8250_port *up,
 			struct of_serial_info *info)
 {
 	struct resource resource;
 	struct device_node *np = ofdev->dev.of_node;
+	struct uart_port *port = &up->port;
 	u32 clk, spd, prop;
 	int ret, irq;
 
@@ -207,13 +155,11 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 		port->flags |= UPF_SKIP_TEST;
 
 	port->dev = &ofdev->dev;
-	port->rs485_config = of_8250_rs485_config;
+	port->rs485_config = serial8250_em485_config;
+	up->rs485_start_tx = serial8250_em485_start_tx;
+	up->rs485_stop_tx = serial8250_em485_stop_tx;
 
 	switch (type) {
-	case PORT_TEGRA:
-		port->handle_break = tegra_serial_handle_break;
-		break;
-
 	case PORT_RT2880:
 		port->iotype = UPIO_AU;
 		break;
@@ -258,7 +204,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 		return -ENOMEM;
 
 	memset(&port8250, 0, sizeof(port8250));
-	ret = of_platform_serial_setup(ofdev, port_type, &port8250.port, info);
+	ret = of_platform_serial_setup(ofdev, port_type, &port8250, info);
 	if (ret)
 		goto err_free;
 
@@ -358,7 +304,6 @@ static const struct of_device_id of_platform_serial_table[] = {
 	{ .compatible = "ns16550",  .data = (void *)PORT_16550, },
 	{ .compatible = "ns16750",  .data = (void *)PORT_16750, },
 	{ .compatible = "ns16850",  .data = (void *)PORT_16850, },
-	{ .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
 	{ .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
 	{ .compatible = "ralink,rt2880-uart", .data = (void *)PORT_RT2880, },
 	{ .compatible = "intel,xscale-uart", .data = (void *)PORT_XSCALE, },