diff options
Diffstat (limited to 'drivers/tty/serial/8250')
| -rw-r--r-- | drivers/tty/serial/8250/8250_gsc.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_of.c | 11 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 100 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pericom.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 61 |
5 files changed, 116 insertions, 60 deletions
diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c index 673cda3d011d..948d0a1c6ae8 100644 --- a/drivers/tty/serial/8250/8250_gsc.c +++ b/drivers/tty/serial/8250/8250_gsc.c @@ -26,7 +26,7 @@ static int __init serial_init_chip(struct parisc_device *dev) unsigned long address; int err; -#ifdef CONFIG_64BIT +#if defined(CONFIG_64BIT) && defined(CONFIG_IOSAPIC) if (!dev->irq && (dev->id.sversion == 0xad)) dev->irq = iosapic_serial_irq(dev); #endif diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index bce28729dd7b..be8626234627 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -83,8 +83,17 @@ static int of_platform_serial_setup(struct platform_device *ofdev, port->mapsize = resource_size(&resource); /* Check for shifted address mapping */ - if (of_property_read_u32(np, "reg-offset", &prop) == 0) + if (of_property_read_u32(np, "reg-offset", &prop) == 0) { + if (prop >= port->mapsize) { + dev_warn(&ofdev->dev, "reg-offset %u exceeds region size %pa\n", + prop, &port->mapsize); + ret = -EINVAL; + goto err_unprepare; + } + port->mapbase += prop; + port->mapsize -= prop; + } port->iotype = UPIO_MEM; if (of_property_read_u32(np, "reg-io-width", &prop) == 0) { diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index e8b5469e9dfa..e17e97ea86fa 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -4779,8 +4779,30 @@ static const struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ pbn_b2_4_115200 }, + /* Brainboxes Devices */ /* - * BrainBoxes UC-260 + * Brainboxes UC-101 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0BA1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-235/246 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0AA1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_1_115200 }, + /* + * Brainboxes UC-257 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0861, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-260/271/701/756 */ { PCI_VENDOR_ID_INTASHIELD, 0x0D21, PCI_ANY_ID, PCI_ANY_ID, @@ -4788,7 +4810,81 @@ static const struct pci_device_id serial_pci_tbl[] = { pbn_b2_4_115200 }, { PCI_VENDOR_ID_INTASHIELD, 0x0E34, PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, + pbn_b2_4_115200 }, + /* + * Brainboxes UC-268 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0841, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_4_115200 }, + /* + * Brainboxes UC-275/279 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0881, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_8_115200 }, + /* + * Brainboxes UC-302 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x08E1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-310 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x08C1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-313 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x08A3, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-320/324 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0A61, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_1_115200 }, + /* + * Brainboxes UC-346 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0B02, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_4_115200 }, + /* + * Brainboxes UC-357 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0A81, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0A83, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UC-368 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0C41, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_4_115200 }, + /* + * Brainboxes UC-420/431 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0921, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_b2_4_115200 }, /* * Perle PCI-RAS cards diff --git a/drivers/tty/serial/8250/8250_pericom.c b/drivers/tty/serial/8250/8250_pericom.c index 025b055363c3..95ff10f25d58 100644 --- a/drivers/tty/serial/8250/8250_pericom.c +++ b/drivers/tty/serial/8250/8250_pericom.c @@ -117,7 +117,7 @@ static int pericom8250_probe(struct pci_dev *pdev, const struct pci_device_id *i uart.port.private_data = pericom; uart.port.iotype = UPIO_PORT; uart.port.uartclk = 921600 * 16; - uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ | UPF_MAGIC_MULTIPLIER; + uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; uart.port.set_divisor = pericom_do_set_divisor; for (i = 0; i < nr && i < maxnr; i++) { unsigned int offset = (i == 3 && nr == 4) ? 0x38 : i * 0x8; diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 2abb3de11a48..3b12bfc1ed67 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2056,7 +2056,10 @@ static void serial8250_break_ctl(struct uart_port *port, int break_state) serial8250_rpm_put(up); } -static void wait_for_lsr(struct uart_8250_port *up, int bits) +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct uart_8250_port *up, int bits) { unsigned int status, tmout = 10000; @@ -2073,16 +2076,6 @@ static void wait_for_lsr(struct uart_8250_port *up, int bits) udelay(1); touch_nmi_watchdog(); } -} - -/* - * Wait for transmitter & holding register to empty - */ -static void wait_for_xmitr(struct uart_8250_port *up, int bits) -{ - unsigned int tmout; - - wait_for_lsr(up, bits); /* Wait up to 1s for flow control if necessary */ if (up->port.flags & UPF_CONS_FLOW) { @@ -3333,35 +3326,6 @@ static void serial8250_console_restore(struct uart_8250_port *up) } /* - * Print a string to the serial port using the device FIFO - * - * It sends fifosize bytes and then waits for the fifo - * to get empty. - */ -static void serial8250_console_fifo_write(struct uart_8250_port *up, - const char *s, unsigned int count) -{ - int i; - const char *end = s + count; - unsigned int fifosize = up->port.fifosize; - bool cr_sent = false; - - while (s != end) { - wait_for_lsr(up, UART_LSR_THRE); - - for (i = 0; i < fifosize && s != end; ++i) { - if (*s == '\n' && !cr_sent) { - serial_out(up, UART_TX, '\r'); - cr_sent = true; - } else { - serial_out(up, UART_TX, *s++); - cr_sent = false; - } - } - } -} - -/* * Print a string to the serial port trying not to disturb * any possible real use of the port... * @@ -3376,7 +3340,7 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s, struct uart_8250_em485 *em485 = up->em485; struct uart_port *port = &up->port; unsigned long flags; - unsigned int ier, use_fifo; + unsigned int ier; int locked = 1; touch_nmi_watchdog(); @@ -3408,20 +3372,7 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s, mdelay(port->rs485.delay_rts_before_send); } - use_fifo = (up->capabilities & UART_CAP_FIFO) && - port->fifosize > 1 && - (serial_port_in(port, UART_FCR) & UART_FCR_ENABLE_FIFO) && - /* - * After we put a data in the fifo, the controller will send - * it regardless of the CTS state. Therefore, only use fifo - * if we don't use control flow. - */ - !(up->port.flags & UPF_CONS_FLOW); - - if (likely(use_fifo)) - serial8250_console_fifo_write(up, s, count); - else - uart_console_write(port, s, count, serial8250_console_putchar); + uart_console_write(port, s, count, serial8250_console_putchar); /* * Finally, wait for transmitter to become empty |